Used Side Channel for sale (1,034)

Condition: used, overall weight: 2,700 kg, maximum load weight: 1,600 kg, axle configuration: 2 axles, loading space volume: 2 m³, first registration: 12/2021, next inspection (TÜV): 01/2026, total width: 1,850 mm, total height: 1,940 mm, Vacuum barrel 1500 liters, ideal for sucking up very sandy drilling mud (bentonite), liquids including those with solids, cleaning channels, shafts, pits, emptying mobile toilets, sucking up lye, emulsions and waste water. MEC vacuum compressor with 3500 liters of air output, B+S industrial engine 13 HP, electric start, lockable engine box (aluminum), vacuum max-0.8 bar, overpressure max 0.49 bar, container hot-dip galvanized, good condition. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us! Itjdpfxovnn Rbe Ag Nen

Condition: excellent (used), Year of construction: 2024, Pallet flow rack / flow rack for special load carriers 1.40m x 1.20m, max. 700kg, space for 300 load carriers - used -: Price ex-site: €59,500 (net), including disassembly, etc.! Supplier: Hofmann Fördertechnik GmbH Roller conveyor supplier: Fluxus Solutions GmbH Year of construction: June 2024 Compartment width: FW I: 1,398 mm (bay with one roller conveyor) – 1 bay available Compartment width FW II: 2,798 mm (bay with two roller conveyors) – 2 bays available Buckling length: K I: 292 mm Buckling length K II: 1,300 mm Roller pitch: 156 mm Clamping length (EL): 1,250 mm Pallet type: Steel pallet Porsche, finished goods according to DIN 15155/8 Dimensions: (W x L x H): 1,200 x 1,400 x 930 mm, lengthwise Storage capacity: at least 200 pallets Pallet weight: max. 700 kg Itodpfx Agjv Uzgie Nsn Frame height: approx. 7.99 m Rack height Including load carriers: approx. 8.32 m Depth of rack/channels: approx. 15 m Rack width: approx. 7.34 m Compartment heights: approx. 1.30 m Roller conveyor designed for a special load carrier Dimensions of the laid-out load carrier: 1400 x 1200 mm Weight of the full load carrier: ~660 kg Weight of the empty load carrier: ~220 kg Both full and empty load carriers pass through the rack Other load carriers of different dimensions also pass through the rack Separation at the end of the channel for zero-pressure removal Additional separations within the channel to reduce back pressure Capacity: 300 load carriers 10 load carriers per channel 5 channels per level 6 levels Condition: good - very good Available: immediately Location: 74912 Kirchardt

Condition: used, Year of construction: 2006, operating hours: 54,050 h, pressing force: 80 t, filling opening width: 1,020 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, oil tank capacity: 2,100 l, power: 94 kW (127.80 HP), empty load weight: 21,000 kg, Technical data baler: Manufacturer Paal Typ Konti 275 E Year of construction 2006 Hours of operation in total 54,050 hours Press power main press 80 tons at 300 bar Specific press capacity 9,7 kg/cm² Feed channel 1,600 x 1.020 mm (l x w) Throughput capacity under operating conditions 350 m³/hour Bale size 750 x 1,100 mm, length variable Driving motor 75 kW Connected load 94 kW Rated current 180 A Tying system 4-fold vertical, fully automatic Bale weight up to 750 kg, depends on material Volume hydraulic oil tank 2,100 l SPS controller (manuf., type) Siemens Simatic S7-300 Operating panel (manuf., type) Siemens Multi Panel Transport dimensions only baler 11,152 x 2,152 x 3,000 mm (l x w x h) Machine weight baler approx. 21 tons Condition of the baler: The press and conveyor belt are in satisfactory working condition, see photo documentation. Further technical data and dimensions for the conveyor belt are not currently available. The plant is currently still in operation and is to be replaced by a larger press plant in the coming months. Scope of delivery: Bale press, bale chute, conveyor belt and machine documentation. Itjdjxcxm Ejpfx Ag Non Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Dismantling and loading is the responsibility of the buyer. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, overall weight: 2,500 kg, empty load weight: 490 kg, maximum load weight: 2,500 kg, loading space length: 4,050 mm, loading space width: 1,780 mm, loading space height: 300 mm, tire size: 185/70R13, Felge schwarz, High loader tandem from the manufacturer ANSSEMS model PSX2500 405x178 Go-Getter. Isdjq Rfk Djpfx Ag Nstn The standard equipment of the Anssems flatbed high loader with brake includes aluminum drop sides, all folding and removable, stable eccentric locks, lashing eyes on the outside and inside, profile channels for mounting accessories or load securing, very stable welded steel frame, pull-out supports for tailgate, support wheel and a V-drawbar. We also offer accessories for Anssems car trailers such as high tarpaulin, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, accessory box, straps and anti-theft device.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software. Itodstvau Aepfx Ag Non

Condition: like new (used), Year of construction: 2024, operating hours: 150 h, functionality: fully functional, Under 150 spindle hours!!! Including HAIMER Power Clamp Economic Plus NG shrink fit device, year: 2024 Including tool holders, clamping devices, and tools Manufacturer: DMG MORI SEIKI Model: DMU 50 3rd Generation, Stealth Design Control: CELOS with HEIDENHAIN TNC640 Year: 2024 Operating hours (approx.): Spindle hours: 140 h, Power-on hours: 790 h EQUIPMENT: - Swivel rotary table, simultaneous - Direct measuring systems and plane transformation in B and C axes - Scraper belt chip conveyor with cleaned gap sieve - Internal coolant supply (IKZ) - Coolant/air blow-off switchable via M-function Itodexgh H Nopfx Ag Njn - Rotating inspection window - Rinsing gun for chip removal - Oil and emulsion mist extractor - Infrared probe, Renishaw Blue Power Probe Kit - Laser tool measurement Renishaw NC4 - Tool length and diameter measurement - Automatic cleaning of the measuring system by air blast - Calibration arbor for tool measurement - 3D quickSET - Quick stop for machine protection, MPC – Machine Protection Control - Automation interface, Profibus M65 - Automatic loading door - Work table with 4-channel rotary feedthrough - Machine-side automation software interface - Electronic handwheel - RMS sensor, internal handling - Digital Manufacturing Package - Messenger V4 - Service Agent - Direct path measuring systems in all axes TECHNICAL DATA: Travel paths: X: 650 mm, Y: 520 mm, Z: 475 mm Clamping area: D630 x 500 Swivel range: -35 to +110° Rotary axis: 360° Rapid traverse: 42 m/min, direct drive Tool holder: HSK-A36, BIG-PLUS compatible, speedMASTER® motor spindle Spindle speed: 20 – 20,000 rpm Spindle power: 35 kW/25 kW (40/100% duty cycle) Spindle torque: 130 Nm/86 Nm (40/100% duty cycle) Tool magazine: 60 slots, incl. setup aid for loading This used machine can be inspected under production conditions. All information without guarantee – sale excludes any guarantees and warranties. Subject to prior sale. Our general terms and conditions of sale and contract apply.

Condition: used, mileage: 175,357 km, power: 279 kW (379.33 HP), first registration: 02/2021, fuel type: diesel, color: other, axle configuration: 4x2, tire size: 315/70 R22.5, fuel: diesel, wheelbase: 5,800 mm, brakes: retarder, driver cabin: day cab, gearing type: automatic, suspension: steel-air, loading space width: 2,500 mm, loading space length: 7,530 mm, loading space height: 2,450 mm, Year of construction: 2021, Equipment: air conditioning, cruise control, differential lock, retarder, spoiler, = Additional options and accessories = - Adblue system - Electrically adjustable door mirrors - Electrically operated windows - Heated seat - Lane departure warning - Radio with bluetooth streaming - Roof spoiler - Spare wheel = Remarks = Axles Configuration: 4x2 19.000 GVW milieuzone toegankelijk!  View more pictures and video's at Or visit our YouTube channel: Bart Spierings NL-DE-GB-FR) Govorim po ryccki Para información en Argentina llamar E-mail autobombas. We do our utmost to provide you with the correct information about the vehicle. Nevertheless, no rights can be derived from the information on our website. = More information = Technical information Engine capacity: 10 cc Drivetrain AdBlue system: Yes Transmission Transmission: 12 gears, Automatic Axle configuration Tyre size: 315/70 R22.5 Brakes: disc brakes Isdpfxexgfp Io Ag Nstn Front axle: Steering; Tyre profile left: 40%; Tyre profile right: 35%; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Tyre profile left inner: 55%; Tyre profile left outer: 55%; Tyre profile right outer: 55%; Tyre profile right outer: 55%; Suspension: air suspension Measures Dimensions (LxBxH): 958 x 250 x 370 cm Weights Empty weight: 8.939 kg Carrying capacity: 10.061 kg GVW: 18.000 kg Max. towing weight: 24.000 kg Functional Height of cargo floor: 125 cm Interior Number of seats: 2 Environment Emission class: Euro 6d Condition Number of keys: 2 (2 hand transmitters)

Condition: used, Year of construction: 2015, Multi-purpose filling line (aluminium and plastic) Video available on request. Manufacturer : Marchesini Tonazzi Year : 2015 Model : Millenium 200 Type : Automatic Filler – Capper Filling head : 2 units Control panel Dosing and height settings: digital (50 memories) Tube orientation: electronic 40 + 2 tube holder cups Dosage: 3 to 350 ml Ø aluminium tubes: 11 – 40 mm Ø plastic / laminated tubes: 11 – 50 mm Total tube height: 50 – 250 mm System: no tubes / no filling Itsdpfxjv E N Suo Ag Non Volumetric dosing unit with two pistons and two cylinders 3-way rotary valves Plunging heads Single-shell hopper Automatic tube ejection PETG casings Cleaning unit: device for cleaning empty tubes using compressed air and dust extraction Inkjet printing on tubes: 1 head Closed-circuit water cooling unit Tube closure, change in 5 min: – Hot air sealing system for plastic tubes – Dual aluminium tube sealing system (single or double fold) Controls : – Hopper product level: electronic – Presence of cap – Print presence check – Tube ejection with wrong code > Stainless steel lift truck. Hydraulic pump lift Model : Roboplacer TU-751 Type : Robotic tube feeder Three-axis orthogonal robot Mini box size 400 x 400 mm Maximum dimension boxes 600 x 400 mm Manufacturer : Marchesini Year: 2015 Model : MA 250 Type : continuous cartoner Version L for long cartons Incorrect carton ejection Extended motorised carton supply system Numbering unit with embossing and polypenco roller Two-channel in-line tube carousel Format range : Width A: 25 – 100 mm, pitch 127 mm Height B: 15 – 85 mm Length C: 60 – 150 mm Full documentation Formats available with the machine : – Tubes: Ø 40 x 200 mm – Cases: 55 x 40 x 220 mm, aeropla – Speed : 150 / min Application : Food industry

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2012 Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Ijdpfexcngnox Ag Nstn

Condition: new, overall weight: 2,000 kg, empty load weight: 490 kg, maximum load weight: 1,510 kg, loading space length: 4,050 mm, loading space width: 1,780 mm, loading space height: 300 mm, tire size: 155R13, Felge schwarz, High loader tandem from the manufacturer ANSSEMS model PSX2000 405x178 Go-Getter. The standard equipment of the Anssems flatbed high loader with brake includes black aluminum side panels, all foldable and removable, black rims, storage box, LED lighting, sturdy eccentric locks, lashing eyes on the outside and inside, profile channels for attaching accessories or load securing, very stable welded steel frame, pull-out supports for tailgate, support wheel and a V-drawbar. Iodpfx Asq Rfkcjg Netn We also offer accessories for Anssems car trailers such as high tarpaulin, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, belts and anti-theft device.

Condition: reconditioned (used), Year of construction: 2008, operating hours: 23,000 h, machine/vehicle number: 00834, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,315 mm, bale width: 1,100 mm, bale height: 720 mm, warranty duration: 3 months, power: 30 kW (40.79 HP), year of last overhaul: 2025, Equipment: documentation/manual, Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler, hereby offers the following machine(s) A repaired HBC60 (30kw) Repaired – in very good technical condition Year of construction: 2008 Volume capacity m3/hr max. 365 334 321 301 Volume weight kg/m3 max. 15 30 50 80 Weight capacity T/hr max. 5.5 10 16 24 Bale weight 400 – 800 kg, depending on S.G. of material and bale length Bale length - adjustable Bale height - 720 mm Bale width - 1100 m Filling opening - 1100 mm x 1320 mm Max. size supply - 1500 mm x 1200 mm Pressure force ram - max 60 tonf. Pressure force pre-press flap - max 25 tonnes Cycle time - 18 seconds Motor - 45 kW Motor Twistomat - 2.2 kW Motor counter pressure pump - 1.1 kW Following repairs have been done in our official Bollegraaf OEM Refurbishment Workshop: * Safety doors needle installation replaced with new Isdpfxoxck U Uo Ag Njtn * Ram wheels behind replaced with new * Bronze strip above ram replaced with new * Movable beam position switch ram replaced with new * Scraper above ram replaced with new * Sealing pre press cylinders replaced with new * New steel beams channel cylinder * nieuwe buisjes oplassen en wielen gangbaar maken * New pusher cylinder underneath vertical tying unit * Safety hatch behind needle installation replaced with new * Several cables and asi modules replaced with new * New air filter * New oil filters

Condition: excellent (used), power: 8 kW (10.88 HP), fuel type: diesel, color: white, Year of construction: 2023, operating hours: 109 h, BOBCAT E10z | 109 hours | 2023 | Complete with buckets Vehicle Identification Number: B4PD18128 More about Geerts Trucks & Trailers: YouTube channel: Geerts Trucks & Trailers Instagram: Geerts Trucks & Trailers Facebook: Geerts Trucks & Trailers TikTok: Geerts Trucks & Trailers LinkedIn: Geerts Trucks & Trailers Like and subscribe to see our latest listings. No rights can be derived from errors in this advertisement. GEERTS Trucks & Trailers makes every effort to ensure the accuracy of all information. Itedpfxexgc Rcs Ag Nen = More information = Year of manufacture: 2023 Model year: 2023 Drive: Track Unladen weight: 1,077 kg Technical condition: very good Visual condition: very good Please contact Olivier Geerts or Edwin Geerts for more information.

Condition: used, comprising: extruder, manufacturer TROESTER, year 1991, serial no. 252807, with control and switch cabinet, manufacturer TROESTER and control and switch cabinet, manufacturer PURFÜRST, microwave channel, manufacturer BERSTORFF, type: MW12.1-200.100-L, year 1995, extraction unit, heating zone tunnel, manufacturer GERLACH, with 6 heating zones, total length: approx. 19,000 mm, extraction system, on steel platform Itodpfxoxad Ens Ag Nsn

Condition: used, New: No Iedjxicm Ajpfx Ag Njtn Empty weight: 1 kg Part suitable for: trucks Type number: 81521066049, K000913 TGX Occ Drukmodulator ABS 24V (eenkanaals) EBS5 81521066049 K000913 OEM : 81521066049, K000913 Article nr.: J105011011-veiling Used Pressure modulator ABS 24V (1-channel) EBS5

Year of construction: 2004, condition: used, machine/vehicle number: 0201-250003, Voortman V600 drilling machine for profiles and flat steel with movable drilling unit. The CNC-controlled drilling unit can be moved in longitudinal direction, adjustment or path measurement is from 0 - 18,300 mm. The maximum processing length of a steel profile is 15,000 mm. The tools for the HSS cooling channel drills are changed using a manual quick-change tool chuck. The workpiece is secured by a vertical hydraulic hold-down device which clamps the component (profile or flat steel) at the position previously approached for the drilling process. The drilling unit includes web and flange height measurement, automatic electronic stepless feed and speed control (constant monitoring), which enables optimum cutting, adjustment by means of a frequency-controlled spindle drive, and the attachment of center punching points is possible. Voortman control: VACON 110, IBM compatible PC Pentium 233MHz with graphics card VGA / TFT. CAD data for profile processing can be read in via USB stick as DSTV or NC data, as well as entered manually on the control panel of the system. The machine is equipped with Windows 98 -DOS. Technical data: - Drilling diameter 8 - 40 mm - Clamping range 10 - 1000 mm - Center punch option - Speed : 200 - 1200 rpm Supply voltage according to drawing - 3 x 400V AC +PE 50 Hz - Fuse protection 35 A slow-blow fuse Iodpfx Agev Rl S Ie Notn - Min. cable cross-section 4 x 6 mm²

Condition: new, overall weight: 2,500 kg, empty load weight: 410 kg, maximum load weight: 2,090 kg, loading space length: 3,010 mm, loading space width: 1,500 mm, loading space height: 350 mm, tire size: 185/70R13, Sturdy braked low-loader with tandem axle from the manufacturer ANSSEMS model BSX2500 301x150. As standard equipment, the Anssems box trailer with brake has aluminum side walls, internal locks, external lashing eyes, profile channels for mounting accessories or load securing, very stable welded steel frame, railing on the side, front high frame, front flap, pull-out supports for tailgate, support wheel and a V-drawbar. Isdpfxjrz Ryde Ag Njtn We also offer accessories for Anssems car trailers such as tarpaulin and frame, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, tool box, lashing eyes, straps and lock.

Condition: ready for operation (used), Year of construction: 2018, A digital UV flatbed printer Fuji is available. Rigid material: max. dimensions X/Y: 1250mm/2500mm, max. material thickness: 50.8mm, max. printing dimensions X/Y: 1260mm/2510mm, max. material density: 34kg/m². Roll material: max. printing width: 2190mm, roll width range: 900mm-2200mm, max. roll weight: 50kg. Ink type: KN series/KV series, channels: 5, colors: CMYK/white. Droplet size range: 6pl-42pl, min. print resolution: 1200dpi, print modes: 6, max. printing speed standard/roll: 22.8m²/18.9m²/h. Machine dimensions X/Y/Z: approx. 4100mm/2000mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. The machine is ready for shipment and cannot be demonstrated. Iedpfxjxnz U Nj Ag Notn

Condition: good (used), functionality: fully functional, tool type: SK 40, Offering an absolute TOP package! Immediate professionalism at the highest level! Itsdpfoxnz Aaox Ag Non Consisting of a ready-to-use used shrink-fit station with chiller, roller shutter cabinet, SK 40 holders, and workbench – ideal for toolmaking, machining, and CNC operations. Included: • WTE ThermoGrip ISG 2202 Shrink-Fit Device - Shrinking range: carbide Ø 3–20 mm, HSS Ø 6–20 mm - Dimensions: 310 × 390 × 640 mm, Weight: approx. 25 kg - Connection: 400 V / 16 A, delivered incl. 3 ferrite disks - Complete with all accessories shown! • Diebold FKS 04 S Liquid Chiller - Automatic cooling system for shrink-fit holders with accessories • Tool Holders - approx. 75 Depo SK40 shrink-fit holders with pull studs - Balancing grade: G 2.5 / 25,000 rpm - High-quality precision chucks from Depo (various lengths and diameters) - All with mounted pull studs (DIN 69872), some with coolant-through (IKZ) – ready for immediate use • Hommel Hercules Roller Shutter Cabinet - Organized and secure storage for tool holders • Heavy-duty Workbench - Length 1.50 m, Depth 70 cm - 40 mm thick worktop - Height-adjustable feet - Integrated triple drawer cabinet Features / Advantages: ✅ Complete package – shrink-fitting, cooling, and storage ✅ Depo quality – precision shrink-fit holders for highest run-out accuracy (balancing grade: G 2.5 / 25,000 rpm) ✅ Pull studs included – no additional investment required ✅ Coolant-through capable – several holders with coolant channels ✅ Professional setup – roller shutter cabinet and workbench included ✅ Everything in excellent condition! New price approx. €25,000! Price is net plus 19% VAT > Invoice with VAT shown. • Inspection and test run on site possible • Collection preferred, shipping by freight carrier upon agreement

Condition: good (used), Year of construction: 2009, 520 S 1600 - 290/290 Complete thermoplastic cylinder, 35 mm, highly wear-resistant Complete thermoplastic cylinder, 35 mm, highly wear-resistant, for 2nd injection unit Drive unit with 30 kW motor and 65 l/min pump delivery rate Accumulator module with 64 l storage capacity (max. 230 bar) Selogica direct control system Technology level: accumulator drive Multi-component processing 2nd injection unit 290 vertical Open nozzle 25 mm Open nozzle 35 mm Open nozzle 35 mm for 2nd injection unit Submerged nozzle tip for open nozzle Electrical and hydraulic actuation of NVD in mold for 1st injection unit Electrical and hydraulic actuation of NVD in mold for 2nd injection unit Heating band for open nozzle Heating band for open nozzle for 2nd injection unit Heating/cooling jacket for open nozzle Variable clamping plate set, Ø 125 mm Minimum installation height expanded to 450 mm Blow-out unit 1 with pressure reducer Selection unit incl. connection Ejector pressure P/Q controlled (prerequisite: T2) Core pull 1, parallel movement P/Q controlled, programmable Core pull 2, parallel movement P/Q controlled, programmable Electric core pull control 1 (prerequisite: VE 436/00) Top guard open, increased to safety dimension Start-up inspection hydraulic accumulator Continuous oil cooling and filtration Increased cooling capacity Parting plane device on short supports for 2nd injection unit Nozzle contact force controlled, programmable for 1st injection unit Nozzle contact force controlled, programmable for 2nd injection unit Conveyor belt connection electric via socket combination Emergency stop interface 1 to 24-pole interface, 2-channel Emergency stop interface 2 to 24-pole interface, 2-channel Temperature release up to 450°C and reinforced cylinder heating Basic equipment for control of electric axes Host computer interface ARBURG 8 programmable digital inputs/outputs on terminal strip Interface for mold temperature control unit 20 mA Itodpfx Agsxl Ty Ej Non Connection cable for REGLOPLAS temperature control unit Serial USB printer interface External PC keyboard with USB interface Additional floppy disk drive via USB interface CompactFlash interface for data set storage Operator authorization with chip card according to EUROMAP 65 Holder for PC keyboard with USB connection Injection with mold closed ("flying injection") 3 measurement circuits for mold temperature 15 electric heating control circuits for mold heating Device interface Start-up parameters Post-pressure switching channel 3 on fixed mold plate Interface for colouring unit LSR unit interface via 6-pin Harting connector Interface for colouring unit for 2nd injection unit Interface for vacuum control Vacuum control with vent function Vacuum monitoring via analog signal Vacuum unit 40 m³/h Kit for connecting mold to vacuum valve Interface for flow monitoring for cold runner system Energy monitoring and power consumption display 2 cooling water circuits laid to fixed mold plate 2 cooling water circuits laid to moving mold plate 4 manual cooling circuits Basic equipment for 2nd cooling water distributor (manual) 7 manual cooling circuits for 2nd water distributor Machine-related cooling circuits controlled Equipment package: advanced monitoring Equipment package: advanced movements Equipment package: production control Equipment package: optimization / operator aids Equipment package: quality assurance Equipment package: documentation aXw Control ScrewPilot for 1st injection unit aXw Control ScrewPilot for 2nd injection u

Condition: used, New: No Itodpfx Agexia N Is Nen Empty weight: 1 kg Part suitable for: trucks Type number: K000914, 20828237 FH12 Occ Drukmodulator ABS 24V (eenkanaals) EBS5 20828237 K000914 OEM : K000914, 20828237 Article nr.: J105006008-veiling Used Pressure modulator ABS 24V (1-channel) EBS5

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 250 h, Since 2021 for customer prints, product demonstrations and trade fair appearances in our possession. Completely ready for use and prepared by manufacturer-certified personnel from IGO3D, Desktop Metal Partner. Itjdpfxjm Rgzas Ag Non Can be demonstrated in Hanover, Germany (also remotely via video call). Easy-to-use Additive Manufacturing 2.0 solutions for industrial production — delivering transformative value. Office-friendly metal 3D printing with two steps (Print > Sinter) and eight materials. Key benefits: „ Easy, two-step processing „ User-friendly software-controlled workflow „ Patented smart Separable SupportsTM technology for quick post-processing „ Qualified for eight materials „ Designed for office-friendly printing „ A trusted system used worldwide with success The easy-to-use Studio System leverages proprietary Bound Metal Deposition™ (BMD), an extrusion-based metal additive manufacturing process where metal rods — metal powder held together by wax and polymer binder — are heated and extruded onto the build plate, shaping a part layer by layer. Once printed, the binder is removed via the debind process, and then sintered, causing the metal particles to densify. The Studio System 2 is even easier to use than ever before with new material formulations allowing printed parts to be placed directly into the furnace without the need for a solvent debind. The result is a streamlined two-step process with a nearly hands-free experience. Eight materials are available, including a range of steels, copper, and nickel and titanium alloys. Simplified metal part production using safe-to-handle bound metal rods The Desktop Metal Studio system creates metal parts for functional prototypes, tooling, jigs and fixtures, and low-volume production applications with expert metallurgy built-in. Easily produce difficult-to-machine parts featuring complex geometries like undercuts and internal channels to optimize metal components in an office setting.

Condition: new, overall weight: 2,000 kg, empty load weight: 300 kg, maximum load weight: 1,700 kg, loading space length: 3,010 mm, loading space width: 1,510 mm, loading space height: 300 mm, tire size: 155/80R13, Braked low-loader tandem from the manufacturer ANSSEMS model GTT2000 301x151. Itodpfsrx Spxox Ag Njn The Anssems box trailer with brake has aluminum drop sides, internal locks, external lashing eyes, profile channels for attaching accessories or load securing, support wheel and a V-drawbar as standard equipment. We also offer accessories for Anssems car trailers such as tarpaulin and frame, flat tarpaulin, net hooks, corrugated grid attachment, side wall attachment, rear support set, tool box, lashing straps and anti-theft device at a reasonable price.

Condition: refurbished (used), Year of construction: 2006, 3/4-automatic screen printing machine THIEME 3010 special model Printing format 55 x 75 cm, screen frame format 100 x 110 cm, parallel lifting machine with extendable vacuum table plate, special version with gripper system, rear delivery, suitable for channel with long infeed or for cross-positioning at a drying channel. The rear part of the gripper extends the machine by 170 cm at the back. Electromechanical machine with pneumatic squeegee pressure control, separate control panel, can be operated from the left or right side, complete with 3 sets of printing and flood squeegees, used, model year 2006, fully refurbished and repainted, in good technical and visual condition. Iodjr Izhuepfx Ag Njtn

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), empty load weight: 12,000 kg, volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Itjdevtpq Hepfx Ag Non Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, New: No Empty weight: 2 kg Part suitable for: trucks Type number: 20570910, K001411 FH12 Occ Drukmodulator ABS 24V (tweekanaals) EBS5 20570910 K001411 Iodpfxsxh Rwgo Ag Njtn OEM : 20570910, K001411 Article nr.: J105006009-veiling Used Pressure modulator ABS 24V (2-channel) EBS5