Used Sleeve Cutting Machine for sale (65,449)

Condition: good (used), Thread cutting machine, pipe thread cutter Hedpfx Ajb A Iyaobdji -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: used, Year of construction: 2001, functionality: fully functional, cutting width (max.): 1,320 mm, input voltage: 400 V, Equipment: safety light barrier, For sale are 2 machines, being sold as a package. • Wohlenberg W132 guillotine cutter + jogging table. The pallet unloader has already been sold. Year of manufacture: 1979, equipped with cut-computer, 3 blades included. • Wohlenberg W92 guillotine cutter + jogging table. 2 blades included, year of manufacture: 2002 Both machines must be dismantled and collected by 31/03/2026. - Condition: Used - good condition - see photos - This is a commercial sale and VAT will be shown separately on my invoices. - Price is net, plus 19% VAT. - The machines are still in use and available by arrangement. Hedpoxxr Rcofx Abdsi - Viewing appointments can be arranged at any time. - Sale without warranty or guarantee.

Condition: good (used), Year of construction: 2016, Year of manufacture: 2016 (according to manufacturer's specification) Counter reading (sheet feeder): approx. 3.3 million. - 5 components - Barcode control - Ionization Special equipment: 9 laser sensors for processing Scodix material Technical data (information without guarantee) - Max. feed format: 762 x 530 mm - Min. trimmed finished format: 100 x 105 mm - Feeder stack capacity: 800 mm - Max. delivery stack capacity: 254 mm Hodsynf Tkopfx Abdei

Condition: used, Year of construction: 1998, machine/vehicle number: M-115H- 007-02/15-08, cutting width (max.): 1,150 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, Equipment: safety light barrier, We offer this used Schneider Senator Schneider Senator 115H - TSC paper cutting machine - Guillotine, year of manufacture 1998. Hodpfx Asymy I Hjbdoi Manufacturer: Schneider Senator Model: Schneider Senator 115H - TSC Year of manufacture: 1998 Condition: used Machine type: paper cutting machine - Guillotine If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1963, machine/vehicle number: SBG 24 191, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, We offer this used Heidelberg Original Heidelberg Cylinder SBG 77x56cm automatic die cutting machine, year of manufacture 1963. Manufacturer: Heidelberg Model: Original Heidelberg Cylinder SBG Serial number: SBG 24 191 Max sheet size (width × length): 77 × 56 cm Year of manufacture: 1963 Condition: used Hjdpfx Aboymx T Isdei If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2024, Description: OREE PH-3015 T6: (3 Kw) New from stock, price is free on truck We can deliver this type Laser cap. from (1 till max 20 Kw) A Compact Design with Complete Protection (CE) table length 3050 mm table width 1530 mm laser head ( SWISS RAYTOOLS ) autofocus Hedpfxoix Nb Ne Abdoi laser capacity Kw 3 overall dimensions 8635 x 3920 x 2350 mm weight of the machine ca. 6.400 kg Furnishing: - Max-photonics Laser source 3 Kw (1~20 Kw as option) - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 3 Kw ) - normal steel 20 mm - stainless steel 10 mm - aluminium 10 mm - brass 6 mm - copper 5 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 2100 mm - Y-axis travel 3000 mm - Z-axis travel 315 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G tube Double pneumatic Chuck 10 ~ 225 mm cutting 10 till 225 mm sqaer and rond tube lenght 6 meter special software for tube cutting max loade 300 kg Automatic table change: - Number of table 2 (15 second max for changing) - automatic change, max load on tables 1000 kg. - 2 x CCTV camera 1 on pallet arear and 1 on cutting inside assisting gasess: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 3 part trolly under work table Why, CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - they know from beginning what to respect service, installation and training. - for this machine the installation and training is 2 week. Not included. Cit9d2x8ou - we can offer installation cost, depend on end-user place and country. - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 50 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Official Dealer CNC Top Ten b.v. Denekamp Holland

Condition: new, Year of construction: 2023, machine/vehicle number: OR-220701306, Description: OREE PH-3015: ( 6 Kw) New from stock We can deliver this type Laser cap. from (1 till max 20 Kw) A Compact Design with Complete Protection (CE) table length 3050 mm table width 1530 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 6 overall dimensions 8265 x 2280 x 2150 mm weight of the machine ca. 6.400 kg Furnishing: - Max-photonics Laser source 6 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 6 Kw ) - normal steel 25 mm - stainless steel 20 mm - aluminium 16 mm - brass 10 mm - copper 7 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 315 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (15 second max for changing) - automatic change, max load on tables 1000 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 3 part trolly under work table Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - they know from beginning what to respect service, installation and training. - for this machine the installation and training is 1,5 week. Not included. - we can offer cost also depend on end-user place and country. Hjdpfx Aeix Nn Uobdji - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 50 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: used, Plasma cutter CLOOS type CPS 40/80 Year of manufacture 1990 Power at 60 % ED 80 Amp. Power at 100 % ED 40 Amp. Adjustment range 40 and 80 Amp (2 steps) cutting capacity with steel max. 25 mm Hose package length 5.5 meters Mains connection 400 Volt with 32 Amp. Plug - Hand torch CLOOS dimension L x W x H 700 x 600 x 750 mm Hodpfx Aedzqccebdoi weight 160 kg good condition

Condition: used, CNC flame cutting machine BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Machine. No. 14 561-06 Year of construction 2006 Cutting area 2500 x 6500 mm track length 8000 mm Track width 3345 mm Track height 650 mm 2x machine cutting torch with cutting table Hedpfx Absf Ncadsdoi

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Power: 50 A = 35% duty cycle Hsdpfx Aodzqa Hjbdei 30 A = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz Hjdpfsdzp T Djx Abdei - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: ready for operation (used), controller manufacturer: Siemens Sinumerik 840D, laser power: 2,400 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,750 mm, total length: 8,400 mm, total width: 7,800 mm, empty load weight: 22,500 kg, De machine is nog steeds functioneel en in gebruik. Uitgerust met: - 3 plaatklemmen - Sheetmaster-lossysteem - GripMaster Workpiece dimensions: 3085 x 1650 mm Type of Laser: Trumpf TLF Max cuttingthickness in steel: 8 mm Hodpfoygyvqox Abdoi Loading System: yes, SheetMaster

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Beam on: 24,314 h Laser on: 55,176 h Hedpfxoxfin So Abdsi

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 25,769 h, machine/vehicle number: 159687, laser power: 2,500 W, travel distance X-axis: 3,335 mm, travel distance Y-axis: 1,545 mm, travel distance Z-axis: 420 mm, swivel angle A-axis (max.): 360 °, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 3335 mm Travel Y-axis: 1545 mm Travel Z-axis: 420 mm A-axis: ±360 ° B-axis: ±135 ° Maximum workpiece dimensions: 3050 x 1525 x 22 mm Maximum table load: 810 kgf MACHINE DETAILS Laser power: 2500 W Laser model: YB-L250A8M NC control: Mazak & Fanuc L-64 Dimensions & Weight Machine dimensions: 7,525 x 2,875 x 2,300 mm Chiller dimensions: 920 x 1,600 x 1,780 mm Extraction unit dimensions: 850 x 850 x 930 mm Machine weight: 14.6 t Hsdpfxeymfmbo Abdji Operating hours: 25,769 h EQUIPMENT Chiller Extraction unit

Condition: used, Year of construction: 2016, Trumpf Trulaser 5040 Type L69 Flat Bed Fiber Laser Cutting Machine, Sheet Size 4000 x 2000mm, Trudisk 800i (FD25) Fiber Laser, L4221N0240, Riedel PC501 Chiller, Trumpf Loadmaster. S/No. N0014A0345, Trumpf Campfil MF8.6 Dust Collector, Riedel L o/5 TR3.26B Chiller, Trumpf 05.21.00 Operating System, Laser Capacity 8000W, Working Range 4000 x 2000mm (X & Y), Z Axis 115mm (2016) Location: Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Hodpfx Absx T Dbljdei

Condition: used, Fiber laser, fiber laser cutting machine with flatbed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer DURMA Type HD-F III 3015 III BH-IPG 2kW Serial no. 822817712 Year of construction 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area 3000 x 1500 mm Pipe cutting device up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power requirement: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50,100,200,300 µm - Max. power consumption 42 kW - Machine power consumption 20 kW - Filter power consumption 4 kW - Cooler power consumption 10+1 kW - Resonator power consumption 7 kW Mild steel Sheet thickness max. 12 mm - Stainless steel Sheet thickness max. 6 mm - Aluminum Sheet thickness max. 6 mm - Copper Sheet thickness max. 3 mm - Brass Sheet thickness max. 6 mm Working range X-axis 3060 mm Working range Y-axis 1530 mm Working range Z-axis 160 mm Hodpfx Abskdnv Tjdei Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator opposite - Water recooling unit for laser source and cutting head opposite - Under-table extraction and extraction filter system opposite - with 2-fold shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flatbed - Lynettes for Rorlaser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: D08L/7863, Offer Number: D08L/7863 Machinetype: straightening and cutting machine Make: WAFIOS Type: R51PL Constr. year: 1990 diameter range: 7-14 mm cutting length: 3000 mm Hsdpfx Abjwi S Eqodei speed - meters/min: 90 Location: In our warehouse

Condition: used, Year of construction: 1961, functionality: fully functional, machine/vehicle number: D08L/7656, Offer Number: D08L/7656 Machinetype: straightening and cutting machine Info: double wire processing Make: BÜNDGENS Type: UD2 Constr. year: 1961 diameter range: 0,8-2 mm cutting length: 1000 mm speed - meters/min: 80 Hodpfxjwi S H Ie Abdoi Location: In our warehouse

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: D08L/8311, Offer Number: D08L/8311 Machinetype: straightening and cutting machine Hsdpfxjwi Thye Abdei Make: HSH Type: for Stuts Constr. year: 1990 diameter range: 3-10 mm cutting length: 10-130 mm Location: In our warehouse

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Type: Satronik D5765 Manufacture: 2016 CNC control: Satocontrol CNC 3010 Track width: 5.750 mm 6 x oxyfuel torche without tracks without table without filter Hsdpfx Aogqkc Njbdoi

Condition: used, Year of construction: 2020, CNC gantry plasma cutting machine with Skew Rotator bevel unit Manufacturer: Messer Model: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 12 m Track gauge: 4,000 mm 1 oxy-fuel torch ALFA 1 plasma torch with Skew Rotator bevel unit Power source: Hypertherm XPR300 Hedpfex Dlwmjx Abdei Cutting capacity: 50 mm pierce 80 mm separation cut Beuting extraction table without filter unit Software: Omniwin with Bevel module ä25226

Condition: ready for operation (used), Year of construction: 2018, This KERF RUM 2500P plasma cutting machine was manufactured in 2018. It features a large cutting area of 15000mm x 2000mm and is equipped with two bridges, each with 275amp plasma. Full history from the manufacturer is available. Contact us for more information about this machine. Hjdpfex Hbkqox Abdei Application Types Cutting

Condition: excellent (used), Year of construction: 1983, wire diameter range: 3,0 - 7,0 mm cutting length: max. 4.000 mm Hodpfofkx Trsx Abdji wire feeding speed: 40 - 80 mtr./min *complete with Wire pay-off WEBER DH 1000*

Condition: new, Year of construction: 2026, laser power: 3,000 W, travel distance X-axis: 200 mm, travel distance Y-axis: 6,500 mm, travel distance Z-axis: 300 mm, DESCRIPTION K12C Two-chuck High-speed small tube laser cutting machine Hodpfx Asxfrlaobdji The K Series high speed small tube laser cutting machine, independently developed and produced by Baison Laser, is specifically designed for the high-speed cutting of a large batch of small metal tube materials in various sizes and shapes. It reliably cuts a variety of metal tubes, including round, square, rectangular, I-beam, angle iron and special-shaped tubes, crafted from stainless steel, carbon steel, and other metals. Technical specifications Tube size range "Round tube: φ10-φ120mm
 Square tube: □10*10-□120*120mm (> R10 mm)
Channel Steel: 8#（need nesting software and specialized work-holding fixtures） 
 Angle Iron: 8#（need nesting software and specialized work-holding fixtures）" Laser Power: 3.000 W (Raycus) Max. Single Tube Weight: 80 kg Chuck Stroke: Full stroke Max. chuck speed: 180 r/min Max Speed: 100 m/min Max Acceleration: 1.5 G Max.Tube Cutting Length: 6.500 mm Tail Material: ≥60 mm X-axis: 200 mm Y-axis: 6.500 mm Z-axis: 300 mm Positioning Accuracy (X/Y): ±0.03 mm/m Repeated Positioning Accuracy (X/Y): ±0.03 mm Power Data: 19.8kw/51A Power supply: 380V/50Hz/3Phases Machine Size: 9.550*1.850*2.135 mm Machine Weight: 3.250 kg (Including automatic loading frames)

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 6,000 W, travel distance X-axis: 2,030 mm, travel distance Y-axis: 4,050 mm, travel distance Z-axis: 100 mm, DESCRIPTION SH4 Fully-enclosed Fiber Laser Cutting Machine The SH Series is a Fully-enclosed Fiber Laser Cutting Machine independently developed and produced by Baison Laser, suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, titanium alloy, and galvanized aluminum-zinc. It meets various cutting needs for medium and thin sheet metals. Technical specifications Features Hedpfsxfq Hpox Abdsi • Electric Control for door and platform. Flexible and Efficient • Loading weight up to 1000kg • Fully Enclosed Protective Cover with CE • Equipped with thin plate clamping tool • Emergency button on remote control Processing Format & Working Range Processing Area (L×W): 4.050 x 2.030 mm X-axis Stroke: 2.030 mm Y-axis Stroke: 4.050 mm Z-axis Stroke: 100 mm Accuracy X/Y Axis Positioning Accuracy: ±0.03 mm/m X/Y Axis Repositioning Accuracy: ±0.02 mm Speed Max. Moving Speed: 120 m/min Max. Acceleration Speed: 1.5 G Power Parameters Power Supply: 34kW/62A (380V/50Hz/3Phases) Protection Grade: IP54 Weight & Size Max Single Lifting Platform Loading: 1.000 kg Machine Size: 11.222*3.720*2.210 mm Machine Weight: 7.738 kg