Used Smoke Extractor for sale (2,057)

Condition: used, Year of construction: 1998, type of input current: three-phase, suction capacity: 1,400 m³/h, negative pressure: 3,000 Pa, arm reach: 4,000 mm, Two-station mobile welding fume extractor, dust extraction, self-cleaning, pneumatic, negative pressure unit KEMPER. For welding, grinding, and all types of dry dust. Cartridge filter element. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. Fan power: 1.5 kW. Capacity: 1400 m³/h Negative pressure: 3000 Pa Extraction arms: 4.00 m long Hsdoxn Nv Ijpfx Ag Njnu Stock no. – 1048

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? Hnodpoxaal Rsfx Ag Neu - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surcharge (recommended) - Retrofit kit STAVO (dust pre-separation) - for FILTOO with spark protection and collecting tray Note : - The device is only used to extract dry dust / smoke - Read the operating instructions before using for the first time

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Nominal volumetric flow: 2050 m³/h Volumetric flow monitoring: differential pressure indicator Filter area: Filter cleaning: motorized Motor power: 3 kW Machine length: Machine width: Machine height: Weight: 250 kg Hnjdpfx Agexgn Rno Nju

Condition: used, Air tube bundle extractor, air tube bundle assembly station for heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger -Handover: in the current condition as viewed -Condition: Diesel engine currently out of service -Air tube bundle extractor: Hydro-Extractors INC -Type: 504- Diesel Hnsdpfxjw Ty Dne Ag Neu -Dimensions: 8400/1900/H2850 mm -Transport dimensions: 8400/1900/H1700 mm -Weight: 6860 kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: CS1, GEWA Chio vacuum CS1. The new price was €1,750. Hjdpsxiv Erjfx Ag Nenu

Condition: used, Year of construction: 2005, Extraction nozzle: 200 mm Motor: 4.0 kW/400 V, 3-50 Hz Nominal flow rate: 2920 m³/h Negative pressure: 1900 Pa Filter area: 15 m² Filter material: Polyester needle felt with surface treatment, Category C Filter cleaning: Compressed air Chip collection volume: 2 x 250 l Max. sound pressure level: 75 dB (A) Dimensions: 2307 x 830 x 1850 mm Weight: 340 kg Hnedpewb Tp Iefx Ag Nou Storage location: Supplier

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. IVAT Ölnebel-T13K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Hnodpfsxnlwzox Ag Nju Equipped with automatic air and temperature control for the workspace. An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054

Condition: used, Extraction capacity of the unit: 182 m³/h with 5 m air hose 45 Ø: 159 m³/h Filter surface: 9,6 m² electr. connection: alternating current 220 V Hnedpfxjb Nv S Ee Ag Nou weight: 20 kg Space requirement: 850 x 330 x 450 mm

Condition: used, Year of construction: 2014, Extraction nozzle diameter: 160 mm Nominal volumetric flow: 1950 m³/h Volumetric flow monitoring: differential pressure indicator Vacuum: 3200 Pa Filter area: Filter cleaning: motorized Motor power: 2.2 kW Machine length: Machine width: Hnedpfsxgn Ruox Ag Neu Machine height: Weight: 320 kg

Condition: ready for operation (used), Dust and mist extractor DeWalt model DW60 Hodpfx Agjxdwn Ds Nonu

Condition: good (used), Year of construction: 2012, Centrifugal fan, dust extractor, fan, suction, dust blower, blower Hnodpfjfiqrfex Ag Neu -Motor: Ziehl-Abegg ECblue .1R -Speed: 1580 rpm -Connection: input Ø 240 mm -Connection: output Ø 450 mm -Dimensions: 995/815/H1060 mm -Weight: 148 kg

Condition: good (used), Manufacturer: Fume Extractor Filter top: 280 x 280 x 20 mm Filter center: 270 x 270 x 230 mm Filter bottom: 280 x 280 x 30 mm Hnjdpfx Agsduiu Se Nju Filter chamber: 360 x 360 x 270 mm Spigot diameter: 45 mm Performance: Connection: Accessories/equipment: mobile Condition: good weight: 0,1 t dimensions: 400 x 630 x 750 mm

Condition: used, Year of construction: 2015, operating hours: 424 h, type of input current: three-phase, overall weight: 1,000 kg, total width: 1,700 mm, total length: 1,650 mm, total height: 2,900 mm, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS Air FTower Filtration Tower, 5000 m³/h Industrial welding hall air filtration – suitable for various technological operations in manufacturing plants, primarily metalworking. Top air intake and draft-free bottom air discharge – delivers purified air directly to the workstations. Layered filtration and ventilation principle; the unit does not require duct installation. Cartridge filter inserts – self-cleaning via compressed air pulses during operation. Filter cleaning is controlled by pressure differential – ensures no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from above, filtered, and released at floor level as breathing-quality air, free of drafts, at a velocity below 1.2 m/s – precisely where employees inhale it, covering a wide 270° range. The tower operates according to the layered ventilation method, recommended by trade associations and considered the optimal air circulation method. Hnsdpfx Agsxg Nx To Nju Year of manufacture: 2015 Operating hours: 424 h Specifications: — Fan power: 5.5 kW — Capacity: 5000 m³/h — Filtration surface area: 80 m² — Filter cartridges: 4 units — Additional final stage F9-class fine filter increases purification efficiency and further protects the fan in case of main filter damage. — 100-liter dust drawer — Very quiet operation: 75 dB(A) — Filtration efficiency: > 99.6 % The unit is in very good technical condition. Warehouse number: 1049

Condition: used, machine/vehicle number: 1980 100 175, Max. volume flow: 220 m³/h Pressure max. 22000 Pa electr. connection: 230 V Hodpfsb Nv S Sex Ag Njnu weight: 16,5 kg Space requirement: 720 x 320 x 410 mm

Condition: used, Year of construction: 1997, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Hnjdpfx Aexgn Rhjg Nou Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Weight:

Condition: excellent (used), functionality: fully functional, dust, chip extraction fan 18.5kw 8700m3/h 4940Pa centrifugal fan. manufacturer: Klima Celje air flow:8700m3/h pressure:4940Pa motor power:18.5Kw 400v 50Hz Hnsdpfx Aohu Aw Heg Nju speed: 2930 impeller diameter:700mm suction opening:250mm pressure side chimney:440 mm overall dimensions:800x1200x1500mm weight:ca 375kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2014, filter area: 150 m², suction capacity: 15,000 m³/h, The WELDEX FT series of filtration towers has been specially designed for the efficient removal of welding fumes in production facilities. These units are primarily intended for extracting contaminated air during the welding of large or complex metal parts, where conventional fume extraction directly at the source is impractical. Fine particles are captured by M-class filter cartridges, and the filters are automatically cleaned during operation using a pulse jet of compressed air (pulse cleaning). The WELDEX FT filtration tower is positioned at the center of the workspace. Fume-laden ambient air is drawn in at the top of the unit from the surrounding area, filtered, and then returned to the hall draught-free through two side outlets. The three-section dust collection drawer gathers separated contaminants from both the pre-separator chamber and the filter compartment. Welding fume extraction for production halls (workplace ventilation systems) Ideal for all work areas where selective extraction is impractical: - Metal industry - Mechanical engineering - Automotive industry - Vehicle manufacturing - Aircraft construction - Shipbuilding Hnsdpfoxg Icksx Ag Nou - and many more High-performance welding fume extraction for manufacturing plants No need for ductwork installation Easy to install – ready for immediate use Durable, cleanable filter cartridges = low operating costs Efficient fume extraction using thermal lift from the welding process Compact design = minimal space required Flexible application = can be relocated at any time Brand: ESTA Model: WELDEX FT-150 Specifications: Motor power: 11 kW Capacity: up to 15,000 m3/h Vacuum: 2,000 Pa Filter surface area: 150 m2 Weight: 1,400 kg Year of manufacture: 2014 Dimensions: Width: 2.10 m x 1.40 m Height: 3.65 m Stock no.: 1031

Year of construction: 1991, condition: ready for operation (used), machine/vehicle number: 004744, extraction capacity: 1200 m³ / h Hnjdpfxjfm Ekxs Ag Nsu drive: 0.75 kW space requirement: 700 x 660 x 1030 mm

Condition: used, volume flow: 7,500 m³/h, Oil mist extractor for CNC machines, Donaldson Torit brand filter separator. The unit is designed for filtration of oil mist (emulsions as well as pure oil), vapors and fumes generated by various metal cutting processes. Hnedpfx Agexd Ry He Nju Filtration efficiency reaches 99.97% Model: DMC-D2 Fan power: 7.5 kW Capacity: 7,500 m3/h Filtration area: 40.8 m2 Filter cartridges in very good condition. Stock no.: 1043

Year of construction: 1992, condition: good (used), Extraction capacity approx .: 1300 m³ / h Filter area approx .: 28 m² Separation bottom near: 100% Hsdpjfug Eujfx Ag Nsnu Arm length: 2 x 2 m Arm suction Ø: 150 mm Extraction motor: 380 V, approx. 1.1 kW Required space: 1250 x 600 x 800 mm Weight: 98 kg

Condition: used, total width: 780 mm, total length: 700 mm, total height: 2,070 mm, type of input current: three-phase, Oil mist extractor for CNC machines, ABSOLENT ODF 2000 filter separator Fan power: 2.2 kW Capacity: 2000 m3/h The Absolent filter is one of the most efficient oil mist and oil smoke filters in the world. It features very low maintenance requirements—up to 6 years of operation without filter replacement—which translates into extremely low operating costs. Hedpoxd Rlcjfx Ag Nsnu Thanks to its construction and large filter surface area, it offers both long service life and consistently high separation efficiency. To guarantee a constant separation rate of 99.99%, the ODF 2000 is equipped with a third filter stage (HEPA filter). Thanks to these three filtration levels, the air can typically be recirculated back into the workshop. Due to its design, the filter can operate continuously without any downtime. Collected liquid accumulates at the bottom of the filter and can be reused in the machining process.

Condition: ready for operation (used), Suction nozzle Ø: 55 mm Hnjdpsd Hbv Dsfx Ag Nsu 1 suction speed electr. connection: 230 V space requirement: 700 x 280 x 370 mm

Year of construction: 2001, condition: like new (used), Filter area: 22 m²# Nominal volume flow: 4700 m³/h Hodpfxjk Tahzo Ag Nonu Minimum flow rate: 3530 m³/h External pressure suction port at V min.: 2450 Pa Sound pressure level max.: 69 dB Suction nozzle Ø: 250 mm Suction engine speed: 3000 rpm Motor: 400V 5.5KW Required space: 2520 x 900 x 1963 mm Weight: 730 kg

Year of construction: 1991, condition: ready for operation (used), machine/vehicle number: 201327/2, Suction capacity: 1200 m³/h Hsdjnwmtcjpfx Ag Njnu Max. static pressure: 1350 Pa electr. Connection: 380 V, 0.75 kW Required space: 700 x 660 x 1030 mm Weight:

Condition: ready for operation (used), Year of construction: 1991, Flow rate: 1500 m³/h Hnedpfxewx H Dyo Ag Nsu Drive motor: 380 V, 2850 rpm, 1.5 kW Extraction pipe diameter: 140 mm 3-meter sections with 3 joints, height-adjustable Intake funnel with throttle valve Space required: 1150 x 600 x approx. 2300 mm