Used Snow for sale (308)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Cgedsd Tbbdopfx Aa Hsu - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: Cgjdpsmhhx Ijfx Aa Hsu - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Cgedpfsmhhyasx Aa Hsu - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports. Cgodpfeh Ek Daox Aa Hsu

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Cjdpsmhh Ansfx Aa Hogu According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Cgodpfx Aaod Tqale Hou - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany Cgjdefdkb Uspfx Aa Heu - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Codpfxjfdkbhs Aa Hogu Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth Cgsdpfxoguk Dke Aa Hsu - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Cgodpsmhhf Sjfx Aa Heu Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) Cedomhhy Njpfx Aa Hegu - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) Cgjdpfxjmidyfs Aa Heu - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm Csdpfxemkixwe Aa Hogu 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Cedpfemhh Dtjx Aa Hegu - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Codjqt Dmyopfx Aa Hogu Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Codpfx Aoguk Dvja Hsgu The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, functionality: fully functional, Year of construction: 2026, A mobile loading ramp with a load capacity of 8,000 kg is a professional and modern solution for logistics, industrial, and distribution companies that require an independent and flexible loading station. Thanks to its electric lifting and lowering system, it enables fast and safe connection between ground level and the loading surface of trailers, containers, and trucks – regardless of their height. It is an indispensable tool in locations without permanent loading infrastructure or where rapid adaptation to changing operational needs is required. Main Advantages of the Ramp 8,000 kg load capacity – safe handling of heavy loads and fully loaded forklifts. Electric lifting actuator – fast and effortless height adjustment of the ramp. Control panel – intuitive operation, mounted directly on the ramp structure. Anti-slip surface – ensures stable forklift movement in all conditions. Cjdpjy Sf N Ijfx Aa Hjgu Side safety rails and wheel locks – enhanced safety in the loading area. Mobility – easy relocation of the ramp using a forklift. Durable welded steel construction – resistant to deformation and intensive use. Construction and Technology The ramp has been designed for maximum strength, durability, and ease of operation. The structure, based on steel profiles and transverse reinforcements, allows forklifts to transport heavy goods without the risk of platform deformation. The anti-slip chequered steel plate covering the entire ramp surface ensures excellent traction even during rain, snow, or in the presence of industrial dirt and debris. The electric actuator enables safe, fast, and precise positioning of the ramp at the required height – from 1,100 mm to 1,650 mm. The entire control system is integrated into the ramp structure, eliminating the need for additional external devices and significantly speeding up preparation for operation. Precision and Operational Safety The ramp is equipped with wheel locks and a ground stabilization system, ensuring safety during operation even under maximum load. Mechanical side protections and properly profiled safety rails protect operators from accidentally slipping off the ramp during maneuvering. The rigidity of the entire structure eliminates the “bending” effect even during intensive use, ensuring smooth forklift movement across the ramp. Mobility and Flexibility Standard Equipment Electric lifting actuator with control panel Anti-slip chequered steel plate along the entire ramp length Integrated wheels for easy ramp relocation Forklift transport hooks Side safety rails and mechanical protections Wheel locks and ramp stabilization system Specification Value Load Capacity 8,000 kg Total Length 11,450 mm Horizontal Section Length 2,950 mm Container Lip Length 450 mm Inclined Section Length 7,000 mm Folding Lip Length 750 mm Ramp Width 2,000 mm Overall Width 2,100 mm Minimum Height 1,100 mm Maximum Height 1,650 mm

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WDB9505621L079423, mileage: 495,400 km, first registration: 11/2005, fuel type: diesel, empty load weight: 10,000 kg, maximum load weight: 9,000 kg, overall weight: 19,000 kg, tire size: 315/80R22.5, axle configuration: 2 axles, wheelbase: 4,200 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel, loading space length: 5,500 mm, Year of construction: 2005, operation weight: 10,000 kg, Equipment: ABS, additional headlights, all wheel drive, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, full service history, hydraulics, immobilizer system, onboard computer, power assisted steering, tachograph, truck registration, For sale: Reliable and powerful Mercedes Benz AXOR with 4x4 drive and three differential locks. This truck is perfectly suited for snow removal, equipped with a large 3-meter SCHMIDT plow hydraulically controlled from the cab. Additionally, the Mercedes features a hook-lift system (Hakowiec) suitable for fitting with a salt spreader or gritter. The truck has been restored, refurbished, and additionally winterized. The vehicle is technically and mechanically fully operational. It meets EURO 3 emissions standards (no DPF), and is registered as a SPECIAL PURPOSE vehicle. The SCHMIDT plow is fully operational. Hook-lift: CTS HYVALIFT 14.45S The price includes a complete set of documents for registration. If required, we also quickly and affordably carry out UDT inspections. We offer all payment methods: Leasing, bank credit, cash, and wire transfer. With payment by cash or bank transfer, you can drive away from the showroom immediately. We also provide insurance services – we will find the lowest premium for any vehicle – TRY US! Additionally, we deliver paid vehicles and trucks directly to any address across Europe. For more information about our services, please contact our sales representatives. Weights and Dimensions: GVW: 18,000 kg (design: 19,000 kg) Payload: 9,000 kg Kerb weight: 10,000 kg GCW: 40,000 kg Cjdoxwt Uyepfx Aa Hogu Towing weight with braking: 24,000 kg Wheelbase: 4,200 mm Emissions standard: EURO 3 Plow dimensions: Width: 340 cm Height: 90 cm Vehicle Dimensions (Axor): Length: 745 cm Width: 250 cm Height: 330 cm Equipment: 4x4 drive – rear, center, and front differential locks Electric front windows Cruise control Onboard computer Original MB radio Analog tachograph ABS 8-speed manual gearbox RINGFEDER coupling Spare wheel In-cab plow and hook-lift control Additional front and rear lighting Amber beacon lights on roof and plow Cab heater ABS Sunroof Fabric upholstery and pneumatic driver’s seat Engine brake/retarder Immobilizer Power steering Inspection Report: The truck was imported by us on its own wheels from the Czech Republic, from the first and only owner. The Mercedes has been thoroughly checked technically and mechanically, and it has been refurbished, restored, and winterized. Currently fitted with winter tires: 315/80R22.5 rear axle – almost NEW 385/65R22.5 front axle – tread about 70%.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 10,000 mm, total length: 9,000 mm, total height: 4,500 mm, Equipment: roof tent, NEW EQUIPMENT Our various sizes—please let us know which one you require: 6m Wide → 6.1m x 6.1m x 3.66m → from €2,599 → 6.1m x 9.15m x 3.66m → from €2,999 → 6.1m x 12m x 3.66m → from €4,499 → 6.1m x 18m x 3.66m → from €4,520 9m Wide (arch spacing 1m or 2m) → 9.15m x 10m x 4.5m → from €3,600 → 9.15m x 12m x 4.5m → from €4,149 → 9.15m x 16m x 4.5m → from €4,999 → 9.15m x 20m x 4.5m → from €6,799 → 9.15m x 26m x 4.5m → from €8,399 12m Wide (arch spacing 1.5m or 3m) → 12.2m x 12m x 6.1m → from €12,399 Cedsudwfnopfx Aa Hjgu → 12.2m x 21m x 6.1m → from €17,999 15m Wide (arch spacing 1.5m or 3m) → 15.25m x 12m x 6.1m → from €14,899 → 15.25m x 21m x 6.1m → from €22,199 plus delivery costs ☆ FINANCING OR LEASING POSSIBLE from €69.89/month ☆ CERTIFIED PRODUCTS ☆ TRANSPARENT OFFER ☆ INCLUDES GERMAN STRUCTURAL ANALYSIS ☆ INSTALLATION AVAILABLE ☆ INSURANCE AGAINST FIRE OR STORM AVAILABLE ☑️ Genuine 750 g/m² PVC tarpaulin—more durable than standard products ☑️ Extra robust and tear-resistant thanks to fabric reinforcement ☑️ High UV resistance ☑️ 100% waterproof ☑️ Extra sturdy, galvanized tubing for maximum stability ☑️ Suitable for year-round use ☑️ German customer service and advice during purchase and assembly ☑️ Snow load: up to 130kg/m² (1m arch spacing) and 70kg/m² (2m arch spacing) ☑️ Wind load: up to wind zone 4 (1m arch spacing) and up to wind zone 2 (2m arch spacing) ☑️ Includes ground pegs and concrete anchors as well as all other small parts ☑️ Spare parts guaranteed ☑️ 5-year warranty on correctly installed PVC tarpaulin ☑️ 10-year warranty against steel frame corrosion ► Almost all models available for immediate delivery ► Colours: green or white ► Includes German structural analysis ► Doors on both gable ends ☏ Call us! We will gladly provide a non-binding quotation with best price guarantee. THE IDEAL ALTERNATIVE TO PERMANENT BUILDINGS Optimal protection from wind, sun, rain, hail, and snow! ☑️ Usually permit-free (unlike wooden, steel, or sheet metal halls) ☑️ No foundation required ☑️ High degree of stability and safety (verified by German engineering office) ☑️ Decades of use: high quality, guarantees, and spare parts supply ☑️ Robust, corrosion-free frame ☑️ Various shapes, colours, and sizes VERSATILE APPLICATION OPTIONS ☑️ For agriculture, forestry, industry, commercial, and private use ☑️ Storage for goods, materials, or machinery ☑️ Garage / carport for trucks, motorhomes, or boats/yachts ☑️ Workshop in lightweight hall ☑️ Canopy for construction sites ☑️ Shelter or shed for livestock ☑️ Barn for straw, hay, and wood ☑️ Greenhouse for plants ! Prices incl. structural analysis ! Delivery and installation available *Images similar • Prices & colours may vary • Price subject to change • For exact pricing, please request a non-binding offer • Available while stocks last • Offer non-binding

Condition: used, mileage: 53,598 km, power: 115 kW (156.36 HP), first registration: 07/2024, fuel type: diesel, empty load weight: 2,309 kg, maximum load weight: 1,191 kg, overall weight: 3,500 kg, tire size: 225/65 R16, axle configuration: 4x2, wheelbase: 4,100 mm, next inspection (TÜV): 09/2026, fuel consumption (urban): 727 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,274 mm, loading space volume: 16 m³, loading space length: 4,680 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Year of construction: 2024, lifting height: 2,700 mm, Equipment: ABS, air conditioning, onboard computer, traction control, trailer coupling, CERTIFIED PRE-OWNED Plus, Color: White IC 194, Current tires: M+S (Mud and Snow) tires, Unladen weight: 2,309 kg, Permissible total weight: 3,500 kg, Cargo area (L x W x H): 4,680 mm x 1,800 mm x 1,900 mm, Tire size: 225/65 R16, Cargo volume: 16 m³, 1st axle: , 2nd axle: , Seats: fabric upholstery, Interior color: grey, Leaf spring suspension, 1 x airbag, Digital tachograph, Towing hitch (ball): Towing capacity 3,500 kg, Electronic Stability Program (ESP), Traction control system (ASR), Automatic climate control, Height-adjustable driver’s seat, Dual passenger bench, Headlight range adjustment, Radio, Digital radio reception (DAB), Multi-function display, AUX & USB port, Bluetooth audio streaming, Bluetooth hands-free preparation, Rear parking sensors, Multifunction steering wheel, Power steering, Height-adjustable steering column, Electric windows (2x), Outside temperature display, Electrically adjustable and heated exterior mirrors, Wide-angle mirror, Immobilizer, Central locking with remote control, Bulkhead with window, Wooden cargo floor, High-impact plastic cargo wall paneling, Rear doors with 270° opening angle, Right-hand sliding door, Hill-start assist, Daytime running lights, 1x13-pin socket, Cup holders, Drive mode selection: ECO driving mode, 12V 13-pin trailer socket, Steering with City function, Start/Stop system, Heated fuel filter, Third brake light, Storage compartment under passenger seat bench, 2 rows of lashing rails in cargo area, Fuel tank: 70 liters, AdBlue tank: 20 liters, Rear step, Payload: 1,191 kg, Former rental vehicle, VEHICLE LOCATION: 90441 NÜRNBERG, DIESELSTR. 65. Contact: Mr. Bächer, Tel. , Financing available. Errors and changes excepted. Codpfxjy Ap Ntj Aa Hjgu

Condition: used, mileage: 203,900 km, power: 425 kW (577.84 HP), first registration: 07/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Year of construction: 2019, Equipment: ABS, air conditioning, navigation system, parking heater, * Meiller three-way tipper Bordmatic left * electric sliding tarpaulin with radio remote control Cgjdot Ttc Ajpfx Aa Hju * snow blade attachment plate size 5 with connections for an electro-hydraulic snow blade * turbo retarder clutch * long driver's cab * 1 bed * additional heating * 9 t FA * 2x 13 t HA * permissible technical GVW 33000 kg * leaf-sprung FA and HA * power shift gears * comfort locking system * compressed air horn * sun visor * electric. Windows and mirrors * Differential lock * CB radio * Toll preparation * Multimedia radio * LED daytime running lights * Stone chip protection grille for lighting * Rotating beacons * Engine 15.6 L 425 KW * Turbo compound * High Performance Engine Brake * Auxiliary drive MB 131-2C * Additional Duomatik trailer brake system * AHK D50 * Rear view camera and turning camera on the right * Cool box under the bed * Additional headlights on the lamp bracket * Hydraulic for tipping trailer * Front tires 385/65R22.5 9/9 mm * Rear tires 315/80R22.5 9/9 and 9/9 mm * Rear tires 315/80R22.5 19/18 and 18/18 mm * and much more * !!! Errors, changes and prior sale reserved!!!

Condition: used, mileage: 63,320 km, power: 115 kW (156.36 HP), first registration: 06/2024, fuel type: diesel, empty load weight: 2,309 kg, maximum load weight: 1,191 kg, overall weight: 3,500 kg, tire size: 225/65 R16, axle configuration: 4x2, wheelbase: 4,100 mm, next inspection (TÜV): 07/2026, fuel consumption (urban): 727 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,274 mm, loading space volume: 16 m³, loading space length: 4,680 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Year of construction: 2024, lifting height: 2,700 mm, Equipment: ABS, air conditioning, onboard computer, traction control, trailer coupling, CERTIFIED PRE-OWNED Plus, color white (IC 194). Current tires: M+S (Mud and Snow) tires. Unladen weight: 2,309 kg, permitted gross weight: 3,500 kg. Cargo area (L x W x H): 4,680 mm x 1,800 mm x 1,900 mm. Tire size: 225/65 R16. Cargo volume: 16 m³. Front and rear axle data available upon request. Seats: fabric, interior color: grey. Leaf spring suspension. 1 x airbag, digital tachograph, trailer coupling (ball type) with towing capacity of 3,500 kg. Electronic Stability Program (ESP), Traction Control (ASR), automatic climate control, height-adjustable driver’s seat, dual passenger bench seat, headlight range adjustment, radio, digital radio reception (DAB), multi-function display, AUX & USB port, Bluetooth audio streaming, hands-free Bluetooth preparation, rear parking sensors, multifunction steering wheel, power steering, adjustable steering column, dual electric windows, outside temperature display, electrically adjustable and heated exterior mirrors, wide-angle mirror, immobilizer, central locking with remote control, partition with window, wooden cargo floor, high-grade plastic side wall protection in the cargo area, rear doors with 270° opening angle, right-side sliding door, hill start assist, daytime running lights, 1 x 13-pin socket, cup holders, driving mode selection: ECO program, 12V 13-pin trailer socket, steering with "City" function, Start/Stop system, heated fuel filter, third brake light, storage compartment under passenger bench seat, 2 rows of lashing rails in cargo area, 70-liter fuel tank, 20-liter AdBlue tank, rear step, payload: 1,191 kg. Former rental vehicle. VEHICLE LOCATION: 90441 NUREMBERG, DIESELSTR. 65. Your contact: Mr. Bächer, phone: [number]. Financing available. Errors and changes excepted. Cgsdpfxey Abkpj Aa Hou

Condition: new, Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Codpsrxtuiofx Aa Hogu Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

Condition: used, mileage: 65,448 km, power: 115 kW (156.36 HP), first registration: 02/2024, fuel type: diesel, empty load weight: 2,309 kg, maximum load weight: 1,191 kg, overall weight: 3,500 kg, tire size: 225/65 R16, axle configuration: 4x2, wheelbase: 4,100 mm, fuel consumption (urban): 727 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,274 mm, loading space volume: 16 m³, loading space length: 4,680 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Year of construction: 2023, lifting height: 2,700 mm, Equipment: ABS, air conditioning, onboard computer, traction control, CERTIFIED PRE-OWNED Plus, Color: White (IC 194), Current tires: M+S (mud and snow) tires, Unladen weight: 2,309 kg, Gross vehicle weight: 3,500 kg, Cargo area (L x W x H): 4,680 mm x 1,800 mm x 1,900 mm, Tire size: 225/65 R16, Cargo volume: 16 m³, 1st axle: , 2nd axle: , Fabric seats, Interior color: grey, Leaf spring suspension, 1 x airbag, Electronic Stability Program (ESP), Traction control (ASR), Automatic climate control, Height-adjustable driver’s seat, Twin passenger seat bench, Headlight range adjustment, Radio, Digital radio reception (DAB), Multi-function display, AUX & USB ports, Bluetooth audio streaming, Bluetooth hands-free preparation, Rear parking assist, Multi-function steering wheel, Power steering, Adjustable steering column, 2x electric windows, Outside temperature display, Electrically adjustable and heated exterior mirrors, Wide angle mirror, Immobilizer, Central locking with remote control, Tinted windows, Partition wall with window, Wooden cargo floor, High plastic cargo wall cladding, Rear doors with 270° opening angle, Right side sliding door, Hill start assist, Daytime running lights, Cupholder, Speed limiter: 160 km/h, Driving mode selection: ECO program, 12V trailer socket preparation, Steering with City mode, Start/stop system, Heated fuel filter, Third brake light, Storage compartment under passenger bench, Two rows of tie-down rails in cargo area, Fuel tank 70 liters, AdBlue tank 20 liters, Rear step, Payload: 1,191 kg, former rental vehicle, VEHICLE LOCATION: 90441 NÜRNBERG, DIESELSTR. 65, Contact person: Mr. Bächer, Tel. , Financing available, Errors and changes excepted. Csdpsyzuyzsfx Aa Hsgu

Condition: good (used), Cologne S Smoking Shelter 2165 x 2500 x 2165 mm Whether on company premises, in public spaces, or in private areas, the Cologne S smoking shelter with right-hand access is a reliable choice for a practical and versatile shelter with timeless elegance for outdoor use. The Cologne S smoking shelter offers an ideal solution for reliable protection with maximum stability. The robust frame construction made of hot-dip galvanized and powder-coated square steel tubing guarantees durability and resilience. The steel components are primed and powder-coated (protection class: C4 medium). Cgjdpfx Aeynkntsa Hsu High-quality wall panels made of tempered safety glass provide protection from wind and rain. The roof is designed to easily withstand even very high wind and snow loads (wind load zone I-III/snow load 1.9 kN/m²). Whether used as a smoking shelter or a waiting area, this canopy blends seamlessly into any outdoor space thanks to its aesthetic design. The Cologne S smoking cabin is the perfect solution for a robust and modern shelter system. Reliable outdoor shelter with timeless elegance Access from the right when facing the shelter Flat roof with integrated gutter and downspout for drainage Galvanized and powder-coated steel construction Back and side walls made of tempered safety glass Manufacturer: Resorti Model: Cologne S Material of base structure: hot-dip galvanized and color-coated steel Roof material: galvanized trapezoidal sheet metal, underside color-coated Wall elements: tempered safety glass (ESG) Width: approx. 2165 mm Height: approx. 2500 mm Depth: approx. 2165 mm Foot area: approx. 4.30 m² Weight: approx. 520 kg Access: right Ground mounting: bolted down with base plate Delivery without bench Manufacturer's price for smoking shelter: €4,080 Find more items – new and used – in our shop! International shipping costs on request!