Used Spare Parts for sale (18,048)

Condition: used, Spare parts for blast machine or blast wheel Gutmann Type: AGS SWL 501 Kjdpfx Adebfkbbodedg Throwing blades Blast wheel housing Injector Blast wheel Elevator bucket Wear plates etc.. NEW!

Condition: used, Year of construction: 2014, operating hours: 2,149 h, 2014 | Hamm HD150TT PNEUMATIC 8 WHEEL COMPACTOR (accident unit - for parts only) | Used Other Roller | 2149 hours 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 19500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 42 inspection points 25 approved ✅ 11 imperfect ℹ️ 6 issues ⚠️ 📌 Inspector's Comment: This pneumatic rubber tyre Hamm roller had an accident and fell on its side. The machine was still running for a while after tipping, therefore the engine has been damaged, since it was running for a short time without sufficient oil circulation. The engine needs to be checked to assess the damages. The engine oil has been drained due to a leak behind the hydraulic pump, leakage being caused by the machine tipped on its side. The cabin and ROPS structure are broken at several places and need to be replaced. All operational levers and switches are OK, only the cab has been distorted, the front and rear tires are OK, the front tires need air for transport and the engine needs attention or even a replacement in the worst case scenario. Overall the machine, except for the cabin structure and the engine, look good. No operations were tested during the inspection. Kjdpfx Adeya E Iredjdg 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40195 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Belt Conveyor, Belt Conveyor System, MFP Conveyor Technology Machine No.: 17565 Year of Manufacture: 2018 Usable length: 3100 mm Belt width: 600 mm Belt length: approx. 6400 mm Frame profile height: 35 mm Deflection roller diameter: 20 mm Belt speed: 10 m/min to 45 m/min Conveyor height: approx. 1120 mm Motor power: 140 Watts Power supply: 230 Volt, 50 Hz - Infinitely variable belt speed via potentiometer on ROFRE frequency inverter, type 897 - Reversible operation (right/left running) Kdodpfx Ajwrihneddeg - Belt drive via INTERROLL drum motor - Stable sheet steel construction with closed steel plate under the conveyor belt - 1 piece height adjustable subframe HAACON with hand crank, conveyor height approx. 950 to 1150 mm - HAACON subframe mounted on steel plate, length 750 mm x width 500 mm x thickness 30 mm - 1 fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Overall dimensions L x W x H: 3180 x 760 x 1150 mm Weight: 250 kg Good condition

Condition: used, Used machine Kedpfx Adswwxyksdsdg

Condition: excellent (used), Year of construction: 1988, wire working range: 0,1 - 1,3 mm cutting length: 5 - 70 mm output: 400/min. complete with ciller and motorized decoiler Kedpfs Syv Tsx Addsdg

Condition: used, Conveyor belt, belt conveyor, belt feeder, MTF belt conveyor Year of manufacture: approx. 2015 Usable length: 2300 mm Belt width: 320 mm Belt length: approx. 4750 mm Frame profile height: 32 mm Return roller diameter: 25 mm Belt speed: 25 m/min to 50 m/min Conveyor height: approx. 950 to 1350 mm Motor power: 0.25 kW Power supply: 230 Volt, 50 Hz - Infinitely variable belt speed via ABB frequency inverter, type ACS150-03E-01A2-4 - Belt drive via RGM geared motor - Two-piece belt body made of aluminium profile with 8 mm slot - Belt body made of aluminium profile with stainless steel sheet cladding - 1 height-adjustable base with quick adjustment, mobile on 4 fixed castors - Conveyor belt was extended by approx. 1000 mm at some point. The lateral connecting rails are somewhat unstable Kedpfx Adox R Eh Isdsdg Overall dimensions (L x W x H): 2350 x 500 x 900 mm Weight: 63 kg

Condition: used, first registration: 01/2013, color: other, Year of construction: 2013, Winch parts of an HMF 6020 with Jib = Dealer information = Kdjdpfx Ajw D Dflsddsg Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Year of construction: 2017, condition: used, machine/vehicle number: IntNr231417, Technical Description – PERO RO Manufacturer: PERO AG Model: RO R1 / 414-EX Year of manufacture: 2017 / 10 Machine type: Cleaning system / Degreasing unit Process: Solvent cleaning (e.g. modified alcohols or hydrocarbons) Technical data (typical for this series): Cleaning system: Closed-loop, fully automatic Working chamber dimensions: approx. 530 × 320 × 200 mm Kdsdpfx Adjx Sv Uzodjg Max. batch weight: approx. 50 – 80 kg Solvent: Modified alcohol (hydrocarbon-based) Drying: Vacuum drying Control: PLC control with touch panel Equipment: Integrated distillation unit, filtration system, oil separator Power consumption: approx. 10 – 15 kW Vacuum pump: Integrated Condition: Very good, well-maintained condition – from ongoing production Special features: • Energy-efficient cleaning system with closed solvent circuit • High cleaning quality with minimal solvent consumption • Ideal for precision engineering and machining businesses The machine can be inspected under power by prior appointment. Subject to technical changes, errors, and prior sale.

Year of construction: 2019, operating hours: 13,000 h, condition: used, machine/vehicle number: IntNr231388, Technical Description – PERO RO Industrial Solvent-Based Parts Cleaning System The PERO RO is a high-performance industrial parts cleaning system designed for the effective and environmentally friendly cleaning of workpieces and components using solvents. It is suitable for a wide range of applications within the metalworking industry and ensures high cleanliness standards while maintaining economic operation. Features: • Cleaning with organic solvents (e.g. hydrocarbons or modified alcohols) • Closed-loop process with integrated solvent circulation • Suitable for small to medium batch sizes and varying component geometries • Automated process control for repeatable cleaning results • Robust construction for continuous industrial operation Kdsdpfxox Sv Uns Addjg Typical Applications: • Degreasing of turned and milled parts • Cleaning before assembly or coating • Removal of coolants, oils, and particulates The machine can be inspected under power by prior arrangement. Specification and data subject to change and error, prior sale reserved!

Condition: good (used), Rotary table, rotary indexing table, indexing head, indexing head -Three-jaw chuck: Ø 140 mm -Height: 185 mm - A maximum of 8 divisions can be set. -Center bore: Ø 35 mm -Weight: 30 kg Kdjdpob A I U Rjfx Addog

Condition: excellent (used), Kärcher Type: PC 60/130 T / with oil separator (skimmer) attachment kit Kärcher parts cleaner Manufacturing, maintenance, workshops, metal processing - automatic parts cleaners have many applications. The parts cleaners work on the basis of aqueous solutions without solvents. The top loader PC 60/130 T is a fully automatic parts cleaner for parts up to 600 mm in diameter, 310 mm in height and 130 kg maximum weight. The items to be washed are cleaned using three-dimensionally arranged flat jet nozzles using solvent-free, heated Kärcher water-based cleaning agents. The items to be washed rotate on an electrically driven rotating basket during cleaning. The Parts Cleaner PC 60/130 T offers numerous practical details such as an integrated small parts drawer that reliably catches loose parts and coarse dirt particles. Equipment: Operating hour meter Holding ring (stainless steel for turntable) Swivel castors, 2 lockable Timer for cleaning cycle Water level control Oil separator (skimmer) attachment kit See Figure 7 The oil separator (skimmer) extends the service life of the cleaning solution considerably. If the cleaning solution has settled, for example overnight, the oil that has been added floats to the top. The skimmer can now be switched on to remove this oil from the cleaning solution. Specifications Technical data: Pressure (bar/MPa) 1.5 / 0.15 Flow rate (l/h) 4500 Connected load (kW) 5.5 Working diameter (mm) 600 Usable height (mm) 310 Housing / frame stainless steel (1.4301) Tested (by) according to CE Heating power (kW) 4.5 Max. temperature (°C) 80 Adjustable cleaning time (min) 1 / 30 Payload (kg) 130 Kdodpfsfu Ikwex Addsg Sound pressure level (dB(A)) 65 Tank capacity (l) 100 Number of current phases (Ph) 3 Frequency (Hz) 50 Voltage (V) 400 Dimensions (D x W x H) (mm) 1080 x 1000 x 1250 Very few operating hours as can be seen in the photo. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST fully automatic SPS parts washer The RWR units from Bio-Circle are the optimum solution for cleaning internal circulation systems without dismantling. The unit is space-saving, quiet and very easy to operate. Thanks to the completely closed system, there is no unpleasant odor from the cleaner or the dirty water. External dimensions → approx. 1200 x 800 x 1050 mm Power supply → 400 V 50 Hz plug 16A CEE 5p 6h Drain → 1 1/4" outlet Technical specification: Type of soiling: limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, small quantities Component geometry: Whole components (without disassembly) Seal of quality: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (default setting): 60 °C Total weight of the cleaning system without tank filling: 180 KG Area of application: The RWR 80 L KST fully automatic PLC has been developed for the plastic injection molding sector and can be used wherever cooling channels (circulation systems, pipes) need to be cleaned. Application: Kdodpjtqfbbjfx Addeg Fill the RWR 80 L KST fully automatic SPS with Power Cleaner KST 2.0. As soon as the minimum fill level is reached and the system is switched on, the system starts to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the flow direction change run automatically, after the instructions shown on the display have been confirmed. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), functionality: fully functional, An old classic—anyone familiar with this device swears by it. 3 units are available, including a box of spare parts with circuit boards, etc. Total price for the complete package of 3 devices: €2,999. Free delivery! Price for a single unit: €1,250. Kodpfx Aexk Ty Noddedg

Condition: good (used), Dividing head, dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -with translation -Shaft mounting: Ø 20 mm -Dimensions: 470/230/H240 mm -Weight: 30 kg Ksdeb A Rfqspfx Addjdg

Condition: good (used), Dividing head, spiral milling attachment, dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -Subhead Ksdpfxjb A Hcco Addedg -Point width: 450 mm -Recording: SK40 - Suitable for: Milling cutter sharpening -Translation: 1:40 -swivel -Weight: 60 kg

Condition: good (used), Year of construction: 1991, Edge banding machine for shaped parts, edge bander, edge banding machine -Workpiece thickness: 10-85 mm -Heating fan: 6 kW, pre-coated edges -Cutting knife -Edge plate Kdjdpfx Adeb A Ninodeg -Transport dimensions: 900/700/H1080 mm -Weight: 135 kg

Condition: good (used), Precast concrete grab, crane grab, pallet grab, stone grab, stone tongs, stone path, grab -Load capacity: 675 kg -Span: max. 220 mm Kjdpfx Aeb A Sp Asddjdg -Number: 2x grippers available Price: per piece -Dimensions: 500/500/500 mm -Even weight: 45 kg/piece

Condition: used, Part of Grease nippleapprox. 1,5t available Kdedpfx Adeglmt Eodsg

Condition: used, for manual drilling machines for stone, wood, and a few for metal Kedpfxshagt Se Addsdg

Condition: used, appr.1,7t available Kdjdpfxoglmt Nj Addog

Year of construction: 2008, condition: good (used), functionality: fully functional, Bio-Circle Parts Washer 2 units available For active environmental protection Color: green/grey The ultimate cleaning workbench – the parts washer is in good used condition. Protective base made of stainless steel perforated plate The Bio-Circle workbench washer, a compact washing table, uses an electrically operated pump to deliver the cleaning fluid to a 3-way valve. Depending on the position of the 3-way valve, the cleaner can be directed via the hose with washing brush, including storage tray for the work area with articulated hose, or both into the table. Operated with Bio Circle L Liquid, the tank in the parts washer biologically breaks down contaminated cleaning fluids, e.g., after removing oil/grease, by means of microorganisms as per the Bio-Chem Surface Technology operating instructions. The used units, and/or brushes to be cleaned for natural biological parts cleaning, are equipped with integrated heating, pump, aeration, filter, and have been regularly maintained. A magnet in the drain strainer retains steel particles. The parts washer system is fully functional and in good condition. Environmental protection through eco-friendly cleaning. Dimensions of the parts cleaning unit: Parts washer H 1120 x W 900 x D 600 mm Weight 45 kg. Kdsdpfx Ajfhdnbeddog Inspection under power possible by prior appointment. Price / details upon request. All technical data subject to error and typographical mistakes. We sell exclusively to countries within the European Community.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: 11513, Single-piece grinding machine with 8 grinding units Kdedsyba Snopfx Addog

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Height 6,010 mm Width 3,501 mm Depth 1,774 mm 25 carriers with a payload of 628 kg each In the clear usable dimensions: H = 359 mm W = 2,880 mm D = 628 mm Kodshfxkajpfx Addjdg Chain pitch 406 mm Storage table at 1,000 mm above floor level with worktop / plastic surface Light gray color, surface cleaned, signs of wear possible Motor power: 1 x 5.5 kW / 400 volts Other extras: Automatic chain tensioning, Various intermediate shelves Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Year of construction: 2000, condition: used, Spare parts measuring machine MORA Mü-Tos Kdsdpfx Adoiuiaujdsg 2XMeasuring stand , 2XMeasuring control box and miscellaneous.

Condition: excellent (used), Year of construction: 2001, Industrial parts washer Fabr.ITS Type: Claener Bj.07.2001 . Kjdpsurcxdefx Addsdg