Used Spark Errosion for sale (226)

Condition: used, filter area: 42 m², suction capacity: 1,750 m³/h, Suitable for welding, grinding, sandblasting, and all types of dry dust. The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. Fan power: 1.1 kW – single-phase Capacity: 1,750 m3/h Dsdpfxoy Hhcao Aggewb Large filtration area – 42 m2 HEPA filter for precise air purification Mechanical spark arrester Stock no.: 1118

Year of construction: 2005, condition: good (used), Engine power kW: 1.1 Dwsdpfjhqcmujx Aggeb Weight kg: 300 Stepless adjustment of the rake angle of the grinding wheel Integrated dust / spark extraction

Condition: used, maximum load weight: 7,580 kg, overall weight: 9,990 kg, axle configuration: 2 axles, first registration: 08/2019, next inspection (TÜV): 05/2027, loading space length: 5,000 mm, loading space width: 2,010 mm, loading space height: 250 mm, We are very pleased that our offer has sparked your interest, and we assure you that you will be able to purchase a good and affordable vehicle with a traceable service history from us! Front support jacks Rear drop-down supports Tie-down points along the sides + large tie-down points in the corners Ramps with hydraulic dampers Height-adjustable towing device Galvanized body PAYLOAD: 7,580 KG GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING Upon request, we will gladly provide you with a LEASE-PURCHASE or FINANCING offer. SERVICE Djdpfxozc Dgfo Aggowb Vehicle inspection (TÜV/HU) / Occupational Safety and Health inspection (UVV LBW) / Load securing inspection (LGS) / Tachograph inspection / Installation of On-Board Unit (OBU) and service by our AUTHORIZED WORKSHOP. TOLL / ROAD TOLLS Toll can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale in accordance with our General Terms and Conditions. The information on the internet is a non-binding description and does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: refurbished (used), TECHNICAL SPECIFICATIONS Rotary table diameter: 600 mm Magnetic plate diameter: 600 mm Segment holder (or diamond grinding wheel) diameter: 430 mm Maximum grinding height: 400 mm Table rotation speed, continuously adjustable: 1-20 rpm Vertical automatic increments: 0.001 mm Spindle motor power: 37 kW Grinding spindle speed, continuously adjustable: 500-1000 rpm Maximum load on table: 900 kg Net machine weight: approx. 7500 kg Power supply: 400 V +/- 5% 3 Phases, 50 Hz Control circuit voltage = 24 V DC TECHNICAL DESCRIPTION • Frame and uprights made of electro-welded, thermally stabilized steel, with high rigidity and reinforcing ribs. Vertical movement of the spindle head • Precision linear slides • Vertical movements of the grinding wheel head via high-precision ball screws + YASKAWA brushless shaft motor • Vertical movements of the grinding wheel head via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel head, 0.001 mm resolution Transverse movement of the rotary table • Precision linear slides • Transverse movement of the rotary table via high-precision ball screws + YASKAWA brushless shaft motor. Dedpox N I A Sofx Aggswb • Transverse table movements via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel headstock, 0.001 mm resolution. Spindle Motor • Coaxial spindle with drive motor • Balanced 37 kW spindle motor, without drive belt or coupling. • Frequency converter for continuously variable spindle speed and rapid braking of the spindle motor at the end of the cycle. Rotary Table • Cast iron rotary table with hydrostatic slides. • Drive via Siemens brushless motor • Continuously adjustable table speed from 1 to 20 rpm STANDARD EQUIPMENT • Electropermanent magnetic chuck, 600 mm diameter with parallel poles, complete with electronic control and attraction force adjustment • Electronic handwheel for manual movement of the vertical and transverse axes. • LODI CNC Type T 2000 • Encoder-based measuring system for the vertical and transverse axes. Resolution = 0.001 mm • Automatic cycle with different feed rates for the various cycle phases: roughing, finishing, and sparking. • Cast iron rotary table with hydrostatic slides • Rotary table speed continuously adjustable by brushless motor • Frequency converter for continuous spindle speed adjustment and rapid spindle motor braking. • Coolant system with external collection tray. • External lubrication unit for automatic lubrication of all moving parts. • Complete segment holder (flange) with a set of segments + grinding wheel holder for diamond grinding wheel • Complete work area enclosure with sliding door • Work lights • Set of service wrenches • Documentation in French (1x printed, 1x on DVD) • CE Certificate Lubrication • External lubrication system for lubricating all moving parts. Watering System • Watering system including protective plates and hoses, including a settling tank outside the machine (without filter) Enclosure • Full enclosure with manually operated sliding door CNC Control LODI T2000 type CNC for managing and controlling the machine's axis movements. Automatic work cycle for grinding parts.

Condition: used, functionality: fully functional, Year of construction: 2025, working width: 600 mm, ✅ Like new & in stock ✅ Ideal for tall grass & large meadows ✅ Shipping available SCHORR FLAIL MOWER RR600HM HEAVY-DUTY BRUSHCUTTER 8HP 252CC MULCHER - Effortlessly cuts tall grass and dense undergrowth - Powerful 252 cm³ 4-stroke engine (8 HP) – robust & reliable even in tough vegetation - 60 cm cutting width – ideal for large areas and tall grass - 32 Y-blades made from hardened steel – efficient shredding of material up to 2.5 cm in diameter - Rugged 4-speed gearbox – 3 forward & 1 reverse gear for maximum control - Adjustable cutting height (20–80 mm) – precise results for any terrain - Self-propelled & easy to operate – also suitable for slopes and uneven ground FEATURES / SPECIFICATIONS Whether tall grass, dense brush, or woody growth: this flail mower completes the job reliably and with endurance. The SCHORR RR600HM is built for challenges – equipped with a robust Loncin 4-stroke petrol engine (252 cm³), delivering a full 8 HP. Its core is a 4-speed gearbox (3 forward / 1 reverse gear), allowing precise control even in demanding ground conditions. With 32 robust Y-blades made from hardened steel on a heavy-duty rotor, the RR600HM provides consistent and fine mulching. On meadows, orchards, field edges or fallow land – even tree cuttings of up to 2.5 cm in diameter are processed effortlessly. The 600 mm cutting width allows for efficient work and excellent maneuverability. Cutting height can be adjusted tool-free using a hand wheel (20–80 mm), so you can quickly adapt to any terrain and vegetation. The RR600HM is designed for intensive use – whether it’s overgrown gardens, large grass areas or agricultural settings. The heavy-duty build, coarse-profile traction wheels, and self-propelled drive system guarantee controlled handling – even on slopes and uneven ground. Up to 6,000 m² can be efficiently and comfortably maintained with this flail mower. A professional-grade flail mower for demanding users, farmers, municipalities, or landscapers. For anyone who wants more than just lawn mowing, this is a true powerhouse at a fair price. Dsdpfxowufhce Aggjwb Technical Data Manufacturer (short): SCHORR Model code: RR600HM Drive type: Self-propelled (3+1 speed gearbox) Blade type: Hammer flails Number of blades: 32 Y-blades Cutting height min. / max.: 20mm / 80mm Cutting width: 600mm Weight: without packaging: 146kg / with packaging: 180kg Basic Dimensions Total length: 1790mm Total width: 730mm Total height: 1150mm Discharge angle: 360º Engine Air-cooled single-cylinder four-stroke engine (OHV) Displacement: 252cc Max. output: 5.9kW / 8HP Fuel type: Petrol (min. RON 95) Starter: Recoil starter (pull cord) Power transmission: V-belt Spark plug: F7RTC or equivalent Fuel tank capacity approx.: 5L Engine oil capacity approx.: 1.1L Our knowledgeable team is happy to assist you with any questions regarding the SCHORR RR600HM Flail Mower. You can reach us by phone or email. We look forward to hearing from you and providing expert advice. Are the acquisition costs for a flail mower too high for you? No problem – we often have used machines in stock. Feel free to contact us.

Condition: used, maximum load weight: 6,000 kg, overall weight: 9,900 kg, axle configuration: 2 axles, first registration: 05/2014, loading space length: 7,200 mm, loading space width: 2,475 mm, loading space height: 2,360 mm, We are very pleased that our offer has sparked your interest and can already assure you that you will be able to purchase a good and competitively priced vehicle with a verifiable service history from our company! Tyres: 285 / 70 R 19.5 / approx. 70% tread remaining GERMAN VEHICLE REGISTRATION / EXPORT SERVICE We organise your registration and export documentation / EUR 1 and manufacturer's declaration for export. FINANCING Upon request, we are happy to provide you with a leasing, hire purchase, or financing offer. SERVICE TÜV general inspection / UVV tail lift safety check / LGS inspection / tachograph inspection / installation of OBU device and service provided by our authorised workshop on site. TOLL / ROAD CHARGES Toll registration can be arranged on site. TRANSPORT / DISTANCES Wittlich train station: 500 m Frankfurt Airport: 150 km Frankfurt-Hahn Airport: 40 km Luxembourg Airport: 75 km Djdpfxoxl Nnro Aggswb Sale according to our General Terms and Conditions. The information provided online is a non-binding description and does not constitute guaranteed properties. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, mileage: 217,000 km, power: 265 kW (360.30 HP), first registration: 03/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 7,428 mm, loading space width: 2,484 mm, loading space height: 2,064 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, We are very pleased that our offer has sparked your interest and can already assure you that you will be able to purchase a good-value vehicle with a fully traceable service history from our dealership! AdBlue tank 60 l, left side Standard trailer coupling, D40, Ringfeder Trailing axle, 7.5 t, steerable, liftable, unloadable Fuel tank 290 l, left side, 650 x 565 x 950 mm, aluminium Front axle air-sprung High Performance Engine Brake Mercedes PowerShift 3 Euro VI engine specification with OBD-C Cab Dwjdpfoxy D Tlsx Aggsb Passenger functional seat Floor variant, tunnel 320 mm ClassicSpace Comfort driver's air suspension seat Cab width 2.30 m Air conditioning M-Cab M-Cab ClassicSpace, 2.30 m, tunnel 320 mm Safety Active Brake Assist Euro 6 265 kW (360 hp) Antos 2536 STEERING AXLE 6x2 Print View HTML Trailer brake, 2-line, brake connectors left Attention Assist Electronic brake system with ABS and ASR Disc brakes on front and rear axles Lane Keeping Assist Stability Control Assist Cruise control Additional information Orten bodywork, Cargo securing, Swing wall and roof Trailer coupling jaw Ø 40, raised coupling Tail lift LBW Bär, 2000 kg, approx. 2200 sheets GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will arrange your registration, export documents / EUR 1 and manufacturer’s declaration for export. FINANCING On request, we can provide a lease-purchase or financing offer. SERVICE TÜV technical inspection / UVV LBW / LGS inspection / Tachograph calibration / Installation of OBU device and servicing by our authorised workshop. TOLL / ROAD FEES Toll registration can be arranged on site. ARRIVAL / DISTANCES Wittlich railway station 500 m away Frankfurt airport 150 km away Frankfurt-Hahn airport 40 km away Luxembourg airport 75 km away Sale in accordance with our general terms and conditions. The information provided online is non-binding and serves only as a description. It does not constitute guaranteed characteristics. The seller is not liable for errors or data transmission mistakes. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, mileage: 156,000 km, power: 155 kW (210.74 HP), first registration: 03/2022, fuel type: diesel, overall weight: 7,490 kg, gearing type: automatic, emission class: euro6, loading space length: 6,070 mm, loading space width: 2,480 mm, loading space height: 2,350 mm, Equipment: ABS, air conditioning, central locking, parking heater, We are delighted that our offer has sparked your interest, and we assure you that you will be able to purchase a good and reasonably priced vehicle with a traceable service history from us! MB ATEGO 821 L with JUNGE box body Double horizontal rear cargo securing system LBW MBB PALFINGER 1,000 KG Djdpfjwz A Uyex Aggswb Auxiliary heater Roof spoiler Sun visor GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and the manufacturer's declaration for export. FINANCING Upon request, we will be happy to provide you with a LEASING or FINANCING offer. SERVICE TÜV/HU inspection / UVV LBW / LGS inspection / Tachograph inspection / Installation and service of OBU device by our BRANDED WORKSHOP before delivery. TOLL / ROAD FEES Toll can be booked on-site. ARRIVAL / DISTANCES Wittlich train station is 500 m away Frankfurt Airport is 150 km away Frankfurt-Hahn Airport is 40 km away Luxembourg Airport is 75 km away Sale in accordance with our general terms and conditions. The information on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, center height: 135 mm, workpiece weight (max.): 70 kg, grinding length: 600 mm, grinding wheel diameter: 405 mm, grinding diameter: 250 mm, grinding spindle motor power: 3,700 W, overall weight: 3,200 kg, pivoting range: 11 °, The machine is equipped with cycle control and is easy to operate; it can process various automatic cycles involving roughing, finishing, and spark-out, but it does not have CNC control. A grinding wheel, dressing diamond, coolant system, and balancing unit are included. Transport and commissioning are available on request. The machine can be inspected under power; it is new and has only been run for demonstrations, not for cutting operations. Djdpfxexl Uc Is Aggowb

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 700 mm, grinding width: 450 mm, NEW ARRIVAL 1 used hydraulic surface grinding machine GEIBEL & HOTZ FS 6040 The grinding area of the G & H FS 6040 is 600 x 450 mm - Year 2000 - Machine with automatic program cycle - rough grinding - finish grinding - spark out - Djdpfsvz A Dcsx Aggswb return to starting position. Machine with 2-axis digital readout - stainless steel coolant system - various flanges - fine pole pitch magnetic chuck - including flanges suitable for Jung HF/JF 520. Machine complete with operating manual and wiring diagram - fully tested for functionality. Very little used machine from a test department (original paint). Pricing: ex stock, unpacked, uninsured, domestic sales plus VAT. Delivery time: immediate - subject to prior sale. Payment: as per usual trade terms - before collection - immediately after receipt of invoice. Best regards, Induba GmbH Mathias Becker

Condition: excellent (used), functionality: fully functional, pressing force: 2,000 t, clearance between the columns: 5,100 mm, retraction force: 130 t, HYDRAULIC PRESS LOIRE SAFE mod. EDIMC 2000 Maximum force adjustable slide Ton 200 to 2,000 n. 04 Cylinders Net slide return force Ton 130 Maximum piece dimensions mm 5,000 x 2,800 x 1,700 Maximum piece weight kg 60,000 Upper part weight Kg 35,000 Slide stroke mm 1,500 Maximum clearance between worktops mm 2,500 Minimum clearance between worktops mm 1,000 Front distance between uprights mm 5,100 Lateral distance between uprights mm 2,000 Moving Bolster Front: Front mm 5,000 Lateral mm 2,800 Plan height above zero level mm 650 External stroke mm 4,000 Capacity Ton 60 Slide Plane: Dimensions mm 5,000 x 2,800 Number of guides n° 8 Guide height mm 1,800 Lower blank holder cushion (6 cylinders, force 600-6,000 kN) Upper slide cushion (force 300-3,000 kN) Spark plug diameter (40 mm) and center distances (150x150 / 200x200 mm) Working speed: Minimum mm/sec 3 Maximum mm/sec 110 Approach mm/sec 400 Dwjdpfx Agowlgr Rogsb Return mm/sec 350 Stop time ms 219 Safety distance mm 438 Weight without tools kg 365,000 USED MACHINE

Condition: used, Technical details: tank capacity: - l total power requirement: 2,2 kw volume capacity: max: 1329 m³/h filter: Patronenfilter air-pressure connection: 6 bar weight of the machine approx.: 88 kg dimensions L x W x H: 1,15 x 0,60 x 2,35 m Cartridge filter/ smoke gas separator with spark pre-separator (H2O) for combustible dusts. Sheet metal construction. Pressure 2,250 Pa Temperature max. 65°C Compressed air tank size Ø 150x 480mm with 1x hose connection Ø 10mm and 1x screw connection inside with shut-off valve 1/2 inch Intake Ø 200mm, floor height = 940mm Exhaust air on ceiling side, 500 x 500mm with tile filter Spark pre-separator medium water Dust collection container size L:360 x W:465 x H:280mm, floor mounting (removable) Dwsdpju Nz Ugofx Aggeb *

Condition: used, mileage: 14,800 km, power: 80 kW (108.77 HP), first registration: 03/1997, fuel type: gasoline, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: red, gearing type: mechanical, emission class: euro1, number of seats: 6, total length: 5,115 mm, total width: 2,140 mm, total height: 2,450 mm, loading space length: 1,950 mm, loading space width: 2,100 mm, loading space height: 1,480 mm, Year of construction: 1997, 1st owner. Only 14,800 total kilometers driven originally. In full service with the fire department until March 2026. Shortly thereafter, driven to us on the highway for approximately 250 kilometers without any issues. Valid TÜV (German vehicle inspection) until November 2027 (passed at DEKRA with 14,535 km, “no defects found”). Major engine service with all fluids, new timing belt, new water pump, new spark plugs, etc., in February 2025 at 14,057 km, documented with a receipt of €2311.19 from a car repair shop. TSF (fire department vehicle) superstructure with roller shutters and ladder mounts on the roof. 6 seats and 4 doors. Power steering. 2.0-liter gasoline engine with 109 hp and G-CAT catalytic converter. Emission code: 93/59/I GKL:G1 (31), which means it qualifies for the green environmental badge. 5-speed manual transmission. Dwsdpfxoy Upbme Aggeb Unladen weight: 2267 kg. Permissible total weight (original from the factory and never changed): 3500 kg. Overall dimensions of the vehicle (exterior): length 5115 mm / width 2140 mm / height 2450 mm. Vehicle with minor paint damage and signs of wear. Overall in good condition. Approved for road use with the original German documents continuously until April 2026. Immediately ready to drive. The illustrated retractable TS (pump) can remain in the vehicle after consultation. The pump has an oil leak and is not fully operational. The TS will not be sold separately. This offer is only valid for commercial businesses, self-employed individuals, and freelancers of all kinds, as well as for authorities/emergency services. Sales to private end consumers are unfortunately not possible. Subject to prior sale and errors. Differential taxation according to §25a UStG (value-added tax cannot be shown separately and will not be added).

Condition: used, mileage: 167,000 km, power: 177 kW (240.65 HP), first registration: 05/2018, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space length: 5,300 mm, loading space width: 2,460 mm, loading space height: 2,050 mm, Equipment: ABS, We are delighted that our offer has sparked your interest and can already assure you that you will be able to purchase a good and reasonably priced vehicle with a verifiable service history from us! Certified KIKO swivel wall body Double rear cargo securing system 3 seats Rear axle with air suspension, including raising and lowering function Trailer hitch ball Trailer hitch coupling GERMAN VEHICLE Dwodpfjzby Uvsx Aggob REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer’s declaration for export. FINANCING If desired, we will be happy to provide you with a LEASE-PURCHASE or FINANCING offer. SERVICE MOT / UVV LBW / LGS inspection / Tachograph inspection / Installation of OBU device and service by our AUTHORIZED WORKSHOP. TOLL / ROAD CHARGES Toll can be booked on site. ARRIVING / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale in accordance with our general terms and conditions. The information on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift tines, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/150 | 60 l/min at 150 bar | Engine: Kohler 19 kW Salmon 45/200 | 45 l/min at 200 bar | Engine: Kohler 19 kW Salmon 35/250 | 35 l/min at 250 bar | Engine: Kohler 19 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Kohler 19 kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1,250x1,200 mm Dimensions with 400l water tank LxWxH: approx. 1,220x1,250x1,200 mm Dimensions with 800l water tank LxWxH: approx. 1,670x1,250x1,200 mm Dedpfxsiky H Ss Aggewb Empty weight without water tank: approx. 370 kg Empty weight with 400l water tank: approx. 400 kg Empty weight with 800l water tank: approx. 430 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min - Operating pressure: 150 - 300 bar ENGINE: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max. power: 26 hp (19 kW) CONTROL PANEL: - Start button - Operating hour counter - Electronic fuel gauge - LED indicators for oil temperature, low oil pressure, clogged air filter, tachometer, generator and spark plugs - Emergency stop button ELECTRICAL CONTROL: - Wind/unwind hydraulic hose reel; - Bypass on/off; - Speed control +/-; - Emergency stop button; - Switch to wireless remote control; INSTALLED ALARM: - Low water protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose - Hose: 80 m ½“ high-pressure hose (included) - Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾“ low-pressure hose - Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration rate: 50 Mesh INCLUDED IN DELIVERY: - Multifunctional wireless remote control IMET; - Engine on/off; - Bypass on/off; - Speed control +/-; - Wind/unwind hydraulic hose reel; - Emergency stop button; - Battery charger for wireless remote control; - 400 or 800 l water tank (with steel frame) made of polyethylene; OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½“ high-pressure hose; - 50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST: - STORZ kit for connection to the water hydrant; - UNI 45 kit; - Version with 2 HD reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit, swivel joint and quick coupling; - High-pressure lance kit with flat spray nozzle 15° / rotating nozzle; - Lance kit for high flow; - Rotating nozzle kit; - Double nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Stair cleaning unit; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Further accessories on request.

Condition: used, mileage: 34,260 km, power: 59 kW (80.22 HP), first registration: 07/1964, fuel type: gasoline, color: green, driver cabin: other, gearing type: mechanical, number of seats: 2, Year of construction: 1964, Equipment: all wheel drive, Vehicle location: Bovenden, Color: green Fabric: gray soft top: green U82 (main series) Start and drive with a brand new engine that has now covered 350 km. The engine must therefore be run in further. The renewed parts include: New engine block, batteries, ignition coil, spark plugs, spark plug wires, distributor cap, hood, windshield wipers, headlight grille, fuses, horn, mirrors, seats, snorkel, engine washer, throttle cable, lights, switch plate, leather protection gearshift, 2x front tires, 5 inner tires, brake shoes front and rear, brake cylinders front and rear, complete exhaust, gearbox rubbers renewed, handbrake rubbers, fuel tank, blind spot blades, special stainless steel lock for battery box, oil, coolant, brake fluid, grease, oil filter, fuel filter and several new loose parts are still available as spare parts. Primed twice and painted twice. The front floor still needs to be painted, then it's just a matter of sticking with it. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dwjdpfxovhi Twj Aggsb - .

Condition: like new (used), GBS Test Pulse Rev. 3 Pulse Generator for Long-Term Insulation Tests The test pulse design is designed for long-term insulation tests on test objects with capacitances up to 6 nF. Converter for High-Voltage Test Transformer · Internal sine wave generator: 50-200 Hz. · Pulse width modulation of the sine wave from 16-24 kHz via full bridge. · Converter voltage adjustable from 0-600 V, Imax=2.6 A, maximum power 1.3 kW · Pulse current limit 110 A (cut-off threshold) Pulse Transformer Control Dodou Egz Repfx Aggjwb · Control via full bridge · Full-bridge power supply adjustable from 0-1000 V, 1.3 A max. · Pulse current limit 100 A (cut-off threshold) Pulse width 20-120 μs, nominal 94 μs, adjustable · 2 selectable series inductors (150 μH, 300 μH) to adjust the pulse width and rise time to the load capacitance and voltage. · Pulse repetition frequency (0.1 – 2.5 kHz), adjustable. · Polarity: Adjustable positive, negative, or alternating depending on the polarity of the sine signal. · Cosine-shaped pulse at the transformer output Pulse transformer cascade · Output transformers in a 5-way cascade circuit. · Total transformation ratio selectable as 1:7.7, 1:10, or 1:15 via taps. Maximum output voltage 15 kV with possible load capacitances of: * 6 nF with a pulse width of 73 μs at a repetition frequency of 2.5 kHz * 10 nF with a pulse width of 103 μs at a repetition frequency of 1.25 kHz · 1:1000 parallel voltage divider. · Overvoltage limitation at approx. 20-23 kV through parallel spark gaps. · Thermistor for overtemperature detection in the first transformer stage. · Ground-side current measurement socket 100 mV/A. Breakdown detection, test · If the maximum bridge currents for the transformer controls or if the maximum currents of the bridge power supplies are exceeded, the high voltage is switched off. · The device has a resettable operating hours counter to determine the test time. Manufacturer's price approx. €59,500 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: new, VAS 5908 Vehicle Charging Computer Charging computer for vehicle starter batteries (lead-acid, Ge, AGM, and fleece batteries) Battery charger / external power supply with MPC4 control board and nominal 14VDC charging voltage (suitable for 12VDC vehicle electrical systems/batteries) - 100% vehicle electrical system compatibility, protection of on-board electronics/airbags - Use as a charger, external power supply, and for vehicle supply in buffer mode (support during diagnostics/programming) - Extensive protection and self-protection functions - Short-circuit and reverse polarity protection - Protection function in the event of battery defects - Reliable spark suppression - Convenient menu navigation / configurable charging parameters - Built-in communication interface - Sealed housing, protected from internal contamination Housing version 'B': Advantageous for industrial production lines - Status indication via display and high-power LEDs - Menu navigation: German, English, French, Italian, Spanish - Extensive Accessories include an external operating status indicator (DBL-SIG-LR, remote indicator), power/charging cable, wall mounting bracket, etc. - Option: Custom charging parameters - Option: Low-temperature operation down to -40°C - Option: Battery diagnostic system - Option: Regeneration charging for deeply discharged batteries - Electrical safety - Certifications: EN60335, EN60950, UL60950-1, UL1236, CSA C22.2 No. 60950-1-07 Used by leading automotive manufacturers Input voltage: 100-240VAC wide range (tolerance: 85VAC-265VAC), 45-65Hz 130-350VDC; NOTE: Use special firmware for use in combination with inductive power transfer! Inrush current / 30A at 264VAC, temperature independent Circuit breaker: 16A slow-blow (e.g., characteristic B) Full load current / 10A (115V/230V) Power factor / >0.98 Dwedpfov Hptzex Aggeb No-load power / 10W deactivated at output Input fuse / F1 (2x 7A-8A T)/250V (6.3x32mm) Transient surge protection / Varistor (8kA / 151J) Input connection / IEC/EN 60320, C14 Weight: 8.2 kg Find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, grinding diameter 660 mm grinding length 2000 mm workpiece weight 1500 kg grinding wheel diameter 400 mm control X-As. Diatos 602 total power requirement 12/22/30 kW Including: With Diamant Wheel / Plunge Grinding With Spark out / Face Grinding The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Dsdpfsyqtg Djx Aggewb We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2020, operating hours: 3,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: SN_20-96, Wet dust collector from Absaugwerk, model W 3000, for sale We are offering a wet dust collector from Absaugwerk for sale. This unit is the ideal addition to grinding and deburring machines. It is particularly suitable for extracting aluminum grinding dust, as sparks are reliably extinguished in the wet dust collector. Optionally, the machine can be equipped with a HEPA filter, making it also suitable for processing stainless steel. Technical data: Dodpfszicy Njx Aggjwb Manufacturer: Absaugwerk Machine type: Wet dust collector, series W 3000 Motor power: 7.5 kW Voltage: 400 V / 50 Hz Discharge: Drain valve Filling: Automatic via solenoid valve The machine is no longer in use at our facility but is in working condition and can be inspected and tested at any time. If you have any questions or are interested, please do not hesitate to contact us.

Condition: as good as new (ex-display), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1735072, grinding length: 600 mm, grinding width: 300 mm, total height: 1,800 mm, total length: 2,630 mm, total width: 1,550 mm, distance table to spindle center: 500 mm, table load: 300 kg, grinding wheel width: 38 mm, spindle speed (max.): 1,450 rpm, overall weight: 1,750 kg, power: 3.75 kW (5.10 HP), input voltage: 400 V, disc diameter: 355 mm, Exhibition machine for sale – top condition - Designed for precision surface grinding tasks in industrial applications - Maximum rigidity and stability thanks to stress-relieved annealed and hardened cast iron construction - High-quality spindle with precision tapered roller bearings (runout accuracy 2 µm) - Electromagnetic chuck for securing workpieces, including automatic demagnetization function - Automatic central lubrication system for all guideways and spindles - Hand-scraped and Turcite-B-coated V-flat guideways ensure extremely smooth, low-friction movement and highest precision - Halogen work lamp: dustproof, fully touch-protected, and protected against water jets according to IP65 - A second grinding wheel flange is included in the delivery Dodpfxjxpvxro Aggowb AD 5 automatic feed control The FSM series models are equipped with an automatic feed control (AD 5). Various grinding cycles are available: surface grinding with infeed at the starting point, slot grinding with infeed at the starting point, and slot grinding with infeed at both the start and end points. The infeed of the grinding wheel can be individually configured depending on the workpiece. The total grinding dimension is divided into rough and fine infeed steps, which can be freely programmed with a minimum increment of up to 0.001 mm, depending on the application. The system also allows dwell times after a defined number of infeed steps and spark-out passes after reaching the grinding dimension, ensuring optimal grinding results.

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA throat: 500 mm Dsdpfxjz H Dye Aggjwb spark plug air gap: 330 - 500 mm electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm weight: 750 kg

Condition: used, machine/vehicle number: 4229, nominal capacity: 12,5 kVA throat: 350 - 500 mm Dodpfebh Nxrjx Aggowb spark plug air gap: 120 mm welding capacity steel: 8 mm electrical connection: 380 V kW space needed: 400 x 1000 x 1150 mm weight: ca. 190 kg

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank (L x W x H): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (L x W x H): approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800 l water tank (L x W x H): approx. 1,670 x 1,250 x 1,200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400 l water tank: approx. 320 kg Empty weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP:  Manufacturer: HPP  Model: CLW ENGINE:  Manufacturer: Vanguard  Model: 35 HP  Fuel: Gasoline  Max. Output: 35 hp (26 kW) CONTROL PANEL:  Start button  Operating hour counter  Electronic fuel gauge  LED display for oil temperature  LED display for low lubricating oil pressure  LED display for clogged air filter  LED display for engine speed  LED display for generator  LED display for spark plugs  Emergency stop button ELECTRICAL CONTROL:  Winding/unwinding of hydraulic hose reel;  On/Off bypass;  Engine speed control +/-;  Emergency stop button;  Switching to wireless remote control; INSTALLED ALARM:  Water shortage protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: Dodpfx Agof Arugjgjwb  The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL:  Type: Electric hose reel  Material: Stainless steel  Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose  Hose: 80 m ½“ high-pressure hose (included)  Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 35 m ¾“ low-pressure hose  Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER:  With washable cartridge and drain valve.  Filtration degree: 50 Mesh INCLUDED IN DELIVERY:  Multi-function wireless remote control IMET; - On/Off motor; - On/Off bypass; - Engine speed control +/-; - Winding/unwinding of hydraulic hose reel; - Emergency stop button;  Battery charger for wireless remote control;  300, 400, 500 or 800 l (with steel frame) water tank made of polyethylene; OPTIONAL ON REQUEST:  Pulsation/booster pump;  50 or 60 m ½“ high-pressure hose;  50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Version with 2 HD hose reels;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Step cleaning device;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request.

Condition: used, Year of construction: 1975, machine/vehicle number: 12138/4, nominal capacity: 20 kVA Djdpfeb Nvimjx Aggjwb throat: 250 - 600 mm spark plug air gap: 270 mm welding capacity steel: ca. 2,5 + 2,5, max. 3,5 - 1,5 mm electrical connection: 380 V kW space needed: 470 x 1170 x 1300 mm weight: 210 kg