Used Spiral Milling Facility for sale (12,615)

Condition: used, x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min Iodpfxevkit Ae Ah Usbf creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and ls the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Gear ratio: 1:2.5 -Voltage: 220/380 volts -Receiving shaft: Ø 30 mm Ijdpfxeb A Hacj Ah Uebf -Tool: Ø 180 x 12-20 mm -Dimensions: 570/340/H195 mm -Weight: 56 kg

Condition: used, x-travel 650 mm y-travel 450 mm z-travel 460 mm Control Fanuc 16iMB max. turning speeds 12.000 min/-1 tool taper MAS BT40 number of tool places 20 Pos. Iedpfxex Ik Uhs Ah Uebf Number of axes 3+2 In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 4 identical machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: NL201FC1175, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, controller model: MSX-850 III CONTROL, The machine has only been used for plastics! TECHNICAL DETAILS Travel X-axis: 260 mm Travel Y-axis: 100 mm (+/- 50 mm) Travel Z-axis: 590 mm C-axis movement: 0.001 Max. main spindle speed: 6,000 rpm Maximum turning diameter: 356 mm Number of driven tools: 3 Tool turret: 16-position Bar capacity: 65 mm Ibsdpfx Ahoxyidps Usf Axes: 4 MACHINE DETAILS Control: MSX-850 III CONTROL Dimensions & Weight Dimensions (L x W x H): 2,705 mm x 2,000 mm x 2,120 mm Weight: 5,800 kg EQUIPMENT Parts catcher chuck Driven tools Tailstock Parts catcher Tool setting probe Dust extraction system

Condition: good (used), Year of construction: 2015, functionality: fully functional, Technical details turning diameter 170 mm turning length 330 mm control Fanuc System Oi-TD total power requirement 27 kVA weight of the machine ca. 6,0 t Additional information Precision CNC turning center with main and sub-spindle, driven tools and Y-axis Fanuc Oi-TD CNC control 6 controlled axes 4 simultaneously controlled axes Maximum workpiece (diameter x length): 170 x 330 mm Bar capacity: 65 mm Travels: X-axis: 211 mm Z-axis: 400 mm Y-axis: ± 50 mm A (counter spindle): 506 mm C-axis: 0.001 deg Ibsdpfx Aex Hgnush Ujf Rapid traverses: X-axis: 24 m/min Z-axis: 27 m/min Y-axis: 12 m/min A-axis: 27 m/min Main Spindle: Spindle diameter at front bearing: 100 mm Spindle head: A 2-6 Spindle motor: AC 7.5/11 kW (30 min./100% duty cycle) Speed range: 4500 rpm Sub-spindle: Spindle diameter at front bearing: 100 mm C-axis: 0.001 deg Speed range: 4500 rpm Drive power: 5.5/7.5 kW (30 min./100% duty cycle) Spindle flushing with integrated pneumatic ejector Turret: 12 stations Tool taper 25 x 25 mm Internal machining 40 mm diameter Max. speed: 5000 rpm Drive power 1.5/3.7 kW (30 min./100% duty cycle) Drilling/milling up to 13 mm diameter Tapping up to M8 Total connected load 27 kVA Dimensions: Machine length without chip conveyor 2690 mm Machine width without chip conveyor 1865 mm Machine height 1900 mm Net weight 6000 kg Equipment and accessories: Bar feeder Chip conveyor Various accessories such as collets and tool holders

Condition: used, x-travel 500 mm y-travel 200 mm z-travel 400 mm table surface area 700 x 300 mm tool taper SK 40 - S20 feed 8 - 400 mm/ min rapid traverse in X und Z 1200 mm / min turning speeds 40 - 2000 U/min total power requirement 2,2 kW weight of the machine ca. 1400 kg dimensions of the machine ca. 1500 x 1200 x 1600 mm Includes 2-axis digital display Heidenhain Ijdpfx Ahox Hay Do Uobf

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 320 mm z-travel 450 mm Control Haidenhain TNC 124 drive of main spindle 3 kW number of spindle speeds 63-3150 u/min tool taper SK 40 stroke of quill vertical 60 mm feed speeds 5-2000 mm/min rapid traverse 2 m/min work table: 800x320 mm coolant 20 l/min total power requirement 5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,2x2,4x1,6 m Ibsdsxndahepfx Ah Uef

Condition: excellent (used), Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool Ibsdpfx Aob A Hvash Uof -Adjustment: SK50 -Tool holder: M20 -Price: for both recordings -Weight: 16 kg

Condition: used, Year of construction: 2014, x-travel 600 mm y-travel 855 mm z-travel 750 mm Control Heidenhain iTNC 530 auto power on hours ca. 38.013 spindle hours ca. 17.871 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Iedpfx Ahsx Ik Tqj Ujbf Technical Features & Accessories: - Interchangeable inserts - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Year of construction: 1998, functionality: fully functional, Used milling machine Ibsdjx Ey R Tepfx Ah Usf Manufacturer: Macmom Model: M100NC Year of manufacture: 1998

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, A machine video from the production plant will be shared on request. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Ibsdjxcbktspfx Ah Uof - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500

Condition: ready for operation (used), total height: 3,870 mm, total width: 3,417 mm, total length: 10,994 mm, controller manufacturer: Heidenhain, empty load weight: 23,500 kg, 4 assen gelijktijdig + B- en C-as hoge druk koeling door spindel (20 bar) 4e as op tafel (zowel horizontaal als verticaal) centraal smeersysteem Gereedschapswisselaar met 40 posities Isdpfx Ajxbukweh Uebf Spaantransportband Longitudinal travel X-axe: 6000 mm Crosstravel Y -axe: 1200 mm Travel Z-axe (Height): 1500 mm Power on spindle: 36 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 40 > 3000 rpm

Condition: used, Year of construction: 1970, power capacity 0 kW tool adaptor 0 total power requirement 0 kW weight of the machine ca. t Ibsdpfxou Sbfdj Ah Usf dimensions of the machine ca. m

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Indexable insert milling cutter -Hole diameter: 20 mm with keyway Ibsdsb A Nm Hopfx Ah Uof -Number: 3x motors available -Price: per piece -Weight: 4 kg/piece

Condition: used, Year of construction: 2011, x-travel 600 mm y-travel 560 mm z-travel 565 mm Iodjx Ik S Hjpfx Ah Ujbf Control Fanuc Series 32-i MODEL A spindle tunring speed 8.000 U/min tool taper BT 40 spindle hours ca. 11.298 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Interchangeable plates/table Accessories, tools, and clamping devices shown are only included if noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2006, greates pass round over bed 960 mm swing diameter over bed slide o: 860 / u: 730 mm turning diameter over bed slide o: 860 / u: 400 control SIEMENS - 840 D forward bearing diameter 200 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000 equipped with a turret for driven tools as well as tailstock. Ibodpfx Aoxcbkmjh Ujf The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000

Condition: used, tool clamping area 0 mm Ijdpfx Asd Ihcaeh Usbf weight 0 t Titan coated carbide rough milling and finish milling cutter with following diameters and different quantities available: Ø 9,7 - 11,7 - 13,7 - 15,7 - 17,7 - 19,7 - 20,5 - 21 mm cutter up to incl. 15 mm 15€/pc. from 15 mm up 20€/pc.!

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz Ibedpfx Ahsb A Nm Ee Uof -Hole: Ø 20 mm -Number: 2x motors available -Price: per piece -Weight: 3 kg/piece

Condition: used, Year of construction: 2021, x-travel 560 mm y-travel 560 mm z-travel 630 mm Control DMG MORI F31iB spindle tunring speed 14.000 U/min max. torque 120 Nm table surface area 400 x 400 mm table load capacity 400 kg rapid traverse 50.000 mm/min tool diameter 70 mm tool length - max. 400 mm Ibjdsx H Txgopfx Ah Usf workpiece weight max. 8 kg Number of working hours ca. 9.911 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Isdoxb Efrjpfx Ah Usbf Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor Iodpfjb A Nm Nox Ah Uebf -Motor: 0.3 kW 12000 rpm at 200 Hz -Hole: Ø 20 mm -Number: 3x motors available -Price: per piece -Weight: 3 kg

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 500 mm z-travel 500 mm Control Heidenhain iTNC 530 spindle tunring speed 15.000 U/min max. torque 190 Nm tool taper HSK 63 Iodpfx Aox H Tw Noh Ujbf table surface area 600 x 600 mm table load capacity 350 kg feed 60.000 mm/min auto power on hours ca. 7.975 h NC program ON ca. 1.999 h spindle hours ca. 1.378 h weight of the machine ca. 9.800 kg Overall size ca. 5.000 x 4.500 x 3.110 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - External coolant system with 3 nozzles, 4 bar - Internal coolant system, 20 bar - Scraper belt chip conveyor Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Slotted disks, window milling tools, indexable inserts, window construction tools Ibjdpfx Aob A Rg Ssh Usf -Slit discs, milling tool for: wooden windows -EXACTLY -Take: Ø 50 mm -1x pallet tool -different sizes -Weight including pallet: 346 kg

Condition: used, Year of construction: 2010, x-travel 600 mm y-travel 770 mm z-travel 675 mm Control Heidenhain iTNC 530 table surface area 400 x 400 mm spindle tunring speed 16.000 U/min tool taper HSK A 63 number of tool places 40 Pos. auto power on hours ca. 78.500 h spindle hours ca. 18.075 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - put into operation in 2012 - Internal cooling system Iedpoxq Hk Isfx Ah Usbf - Renishaw 3D probe - Dual pallet changer - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine Ibjdpfoh Nvyzox Ah Usf -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg