Used Spot Gun for sale (3,085)

Condition: good (used), Year of construction: 2002, Manufacturer: Millutensil Type: MIL 203 Control: Siemens SIMATIC OP7 Year of manufacture: 2002 Pressure 0 - 250 Bar T Size T-22 Opening force 35 Ton Closing force 150 Ton Distance between columns 2130 mm Table height above floor 770 mm Lhsdpfx Aaswpkv Isxek Upper table rotation 180 degrees Specifications Metric US Standard Capacity 30000 Distance between the columns 2130 mm Table length 2000 mm Table width 1500 mm Table height 1500 mm Run-in speed 3900 - 4800 mm/min. Working speed 480 mm/min. Return speed 2100 - 3000 mm/min. Dimensions (approximate) Length 6150 mm Width 3500 mm Height 4800 mm Weight 28000 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details.

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Specifications Metric US Standard Distance between uprights 930 mm Installation height 760 mm Table length 755 x 755 mm ram stroke 600 mm Starting speed 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Table rotation 360 rpm Lhodperr Ui Rsfx Aaxsk Dimensions (estimate) length 1350 mm width 1350 mm Height 2000 mm weight 1500 kg

Condition: new, Year of construction: 2025, throat depth: 500 mm, – Capacity 35 kVA – Pneumatic Lsdpsx N Nfujfx Aaxohk – Throat depth 500 mm – PX1700ECO control – Documentation – 400V

Condition: excellent (used), Water-cooled chiller with refrigeration compressor Lhedpfxezg Nhbs Aaxek Manufacturer: HYFRA (DALEX) Cooling capacity: 6.9 kW at a water temperature of 20°C Compressor power: 3.4 kW Dimensions (L/W/H) in mm: 715 / 715 / 1375 Weight: 190 kg

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SWM001, type of input current: DC, nominal power at 50% duty cycle: 37 kVA, input voltage: 380 V, type of cooling: water, overall weight: 230 kg, warranty duration: 24 months, welding power (max.): 75 kVA, total width: 500 mm, total height: 1,620 mm, total length: 950 mm, Spot welder / welding machine with water cooling – 75KVA – adjustable power, resistance, etc., + spare tips Ljdpfoyl Sy Esx Aaxohk

Condition: good (used), Power: 50 kVA Ledpfxspy Dypj Aaxjhk Arm design: 520 mm

Condition: good (used), Arm design: 270 mm Lhjdjpy Dy Espfx Aaxsk Power: 125 kVA

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, throat depth: 500 mm, Manufacturer: Fase Ljdpfx Aasuhn Tkexshk Full: 116 kVA Version: 500mm The machine used to be part of a system, its settings and performance were controlled via a central control unit, which is currently missing, This version is required to operate the machine!

Condition: repair required (used), Full: 63 KVA Arm design: 400 mm The machine is currently not working (control panel missing) Lhodpfx Aaepy Dx Ioxsk

Condition: good (used), Power: 15 KVA Lhsdpem Twicsfx Aaxjk Execution: 530 mm

Condition: not inspected (used), throat depth: 500 mm, Manufacturer: Fase Full: 116 kVA Version: 500mm Lhjdpfeuhn Uhex Aaxsk The machine used to be part of a system, its settings and performance were controlled via a central control unit, which is currently missing, This version is required to operate the machine!

Condition: ready for operation (used), throat depth: 550 mm, Output: 25 kVA Design size: 550 mm Lodpfoyk S Utex Aaxohk

Condition: good (used), Pressing force: 40 tons Table surface area: 590 x 1000 mm Lhjdpjzkrmnofx Aaxok Ram surface area: 590 x 1000 mm Stroke: 900 mm Table is extendable, ram plate is swiveling.

Condition: good (used), 2 used water-cooled spot welding machines Technical data: Max. welding output: 23.7 kVA Rated output at 50% duty cycle: 8 kVA Short-circuit current: 8.8 kA Open-circuit voltage in 4 steps: from 2 – 3.2 V Electrode force: 17 – 235 daN Cooling water flow rate: 4 l/min Weight: 85 kg per machine Price: 550,-- EUR net per machine Lsdpfoy Naq Iex Aaxehk Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, current capacity 8,0 kVA throat 80 - 480 mm contact pressure capacity 17 - 235 daN horn spacing 140 mm mm rated capacity 8,0 kVA Lodpfx Asy Ty Dcjaxjhk voltage 380 V total power requirement 17,8 kVA weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Water-cooled, pneumatically operated spot welding tongs Nimak L123 Very good used condition, fully functional. Item location is 75053 Gondelsheim See pictures Shipping via freight forwarder or collection Lodjxmuyvepfx Aaxjhk

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Hib Akzent 1000 Model T1060-8 Welding Tongs Control Very good used condition, fully functional. Item location: 75053 Gondelsheim See pictures Lhsdpfx Aajxmuzmjxok Shipping by freight carrier or collection

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Water-cooled, pneumatic spot welding tong Nimak L193 TB. Very good used condition, fully functional. Item located in 75053 Gondelsheim. See photos. Shipping by forwarding agent or collection. Ledpfx Aexmuypeaxohk

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Lhsdjv Dxm Sepfx Aaxsk Weight 900 kg good condition

Condition: used, AC spot welding machine, projection welding machine ARO Type MA 350 DC AC resistance welding machine Machine No. MA35031332 / 9731122B110 / Year of manufacture 1997 Power at 50% duty cycle 30 kVA Power at 100% duty cycle 21 kVA Maximum welding power 156 kVA Reach 550 mm Electrode arm diameter 60 mm Electrode holder diameter 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 Volt, 50 Hz Connected power 75 kVA / 63 Amps / Conductor cross-section 3x 16 mm² Possible sheet metal combination max. 5 mm + 5 mm - Welding control ARO Micro 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuously adjustable welding current via thyristor module - Parallel electrode guidance - Double-stroke welding cylinder (pre-stroke / welding stroke) - Operating mode: single stroke and series of spots - Electrode force continuously adjustable via air pressure - Water-cooled via external water cooling (water chiller not included) - Electric foot switch - Control cabinet with control unit permanently mounted on the machine - PC interface RS 485 - Welding point counter Lhodpfx Aohpf Iysaxok - Operating manual for control unit, spot welding machine and electrical diagram available Space requirement W x H x D 520 x 1550 x 1150 mm Weight 290 kg Very good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Lhsdpfx Aoycv Saoaxsk Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet Lodpfx Aajdzp Tcexehk - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: excellent (used), Air-operated, water-cooled 3-phase direct current spot welding machine make DALEX type PMS 11-4 G3 Asload: 650 mm with special cylinder with low pressure range of 20-120 daN Rated power at 50 % duty cycle 60 kVA Sec. short-circuit current: 25 kA sec. open-circuit voltage: 3.68 V with add-on switch cabinet in accordance with VDE 0100 Main switch Lhodpfx Aaou A Dg Eoxsk Synchronous welding control 8036 Weight: 685 kg

Condition: good (used), Projection welding machine Make DALEX Type PMS 16-1 Projection: 350 mm Rated power at 50 % ED: 250 kVA Sec. short-circuit current: 110 kA Sec. open circuit voltage: 12.5 V Electrode force: 340-2,040 daN with double stroke cylinder and feed stroke with synchronous welding control 5/36 TT Weight: 988 kg Lsdpfsubdatex Aaxjhk function-tested Machine is still being refurbished

Condition: refurbished (used), pneumatically operated spot welding machine DALEX, type PMS 10-4 arm reach 350 mm with EH cylinder, electrode force 65-390 daN rated power at 50% duty cycle: 50 kVA Lhodpfehnh Etjx Aaxsk secondary short-circuit current: 34 kA secondary open-circuit voltage: 2.5-5.0 V with add-on control cabinet according to VDE 0100 main switch 4-stage switch synchronous welding control 8033 start via foot pedal weight 410 kg