Used Spot Welder for sale (1,755)

Condition: used, Year of construction: 1975, machine/vehicle number: 12138/4, nominal capacity: 20 kVA throat: 250 - 600 mm spark plug air gap: 270 mm welding capacity steel: ca. 2,5 + 2,5, max. 3,5 - 1,5 mm Rsdpfxsb Nvims Aaaer electrical connection: 380 V kW space needed: 470 x 1170 x 1300 mm weight: 210 kg

Condition: used, Year of construction: 1973, pressure 40 t distance between columns 1150 mm stroke 1100 mm distance table/ram, max. stroke up, adjustment up 1035 mm table surface area 900 x 1280 mm table height over floor 630 mm Redpfxsyx Inme Aaaor ram surface 1000 x 1200 mm side window 705 mm power capacity 5,5 kW weight 9,0 t Dimensions (WxDxH) 2,35 x 3,8 x 3,55 m with swivelling ram, movable table, ejector in table

Condition: used, Year of construction: 1979, pressure 40 t distance between columns 620 mm stroke 975 mm distance table/ram, max. stroke up, adjustment up 940 mm table surface area 590 x 1000 mm table height over floor 770 mm ram surface 590 x 1000 mm side window 470 mm max. tool weight 2,5 t max. capacity of swivelling ram plate 1,5 t Rjdpfeyx Ingex Aaasr Speed down 0 - 50 mm/s Speed up 0 - 34 mm/s Working speed 0 - 10 mm/s oil volume 150 l power requirement 9,5 kW weight 3,2 t dimensions (WxDxH) 2,0 x 2,4 x 3,0 m with swivelling ram, movable table, ejector in table

Condition: used, Year of construction: 1987, pressure 400 t table length 2500 mm table width 2000 mm Distance between columns 2000 mm Stroke 2600 mm Distance table/ram, stroke up 2500 mm Table surface area 2000 x 2500 mm Table height above floor 1120 mm Ram surface 2000 x 2500 mm Side window 1500 mm max. capacity of swivelling ram plate 20 t Oil volume 1000 l Power capacity 48,0 kW Weight 85,0 t Dimensions (WxDxH) 8,6 x 5,3 x 8,2 m with swivelling ram, movable table, inclining table, ejector in table Redpfx Aaevuumioaer stored in dismantled condition - Video at seller's site before dismantling available

Condition: used, weight of the machine ca. 110 kg dimensions of the machine ca. 950 x 435 x 980 mm ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- orientated welding devices in this case. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in Rsdjwf Rg Sopfx Aaajr

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. Rjdpowf Rgrsfx Aaaor In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A Rodewf Rg Eopfx Aaaer --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC Rodpfxjwf Rgxe Aaaer version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, MIG / MAG Pulse Gas-Shielded Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Output: 330 amps = 50% duty cycle (DC) 300 amps = 60% duty cycle (DC) 210 amps = 100% duty cycle (DC) Stepless adjustment range Open circuit voltage approx. 50 V Open circuit voltage approx. 30 V Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and amperage - Pulse welding function - Various welding programs selectable Welding methods: MIG/MAG/TIG (programmed and manual modes) 2-stroke, 4-stroke, 4-stroke special, and spot welding - Welding control with program memory and disk drive for external program storage - Separate 4-roller wire feeder FRONIUS Type VR 152 with connecting hose package approx. 1.5 meters - 4-meter BINZEL hose package with central connection - External Fronius water cooling unit Type FK 71 - Welding gas pressure regulator - Supplied with 1.2 mm welding wire Space requirements (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration Rsdpsyv H Eljfx Aaaer

Condition: used, Insertable welding controller in 19" housing, type NPS 8043-1 IQ1, with quality assurance and 50 programs. Solenoid valve voltage: 24 V DC. Complete with MB 260 current measuring strap. ADDITIONAL CONTROLLER MODULES IN STOCK: e.g. 8036 - 8036-S3, 8033, 8043, MPS 200 R1, RATIA 43a, HWS 2202 Profil IQ. Rjdpfx Aaedga Nboasr

Condition: used, Year of construction: 2005, functionality: fully functional, Spotting Press – Manufacturer: Reis – TUS 130-100 – 26–100 t Spotting Press – Table 1,600 × 1,300 mm For sale is a spotting press from manufacturer Reis, model TUS 130-100, with an adjustable pressing force from 26 to 100 t. This machine features a spacious table area of 1,600 × 1,300 mm, a daylight opening of 1,700 mm, as well as extensive features such as a tilting ram plate and integrated ejector. It is especially suitable for spotting, adjustment, and tryout work in tool and mould making. ===== Technical Data & Information: Spotting Press Reis TUS 130-100 – 26–100 t ==== General Information - Manufacturer: Reis - Model: TUS 130-100 - Drive Type: 4-column spotting press - Pressing force: 26 – 100 t (adjustable) - Machine weight: approx. 17,000 kg - Dimensions (W × D × H): 4,900 × 2,800 × 5,500 mm ==== Working Area - Maximum daylight: 1,700 mm ==== Table and Ram - Table size: 1,600 × 1,300 mm - Max. table load: 12,000 kg - T-slots: DIN 650 – 22 mm ==== Forces - Retraction force: max. 45 t ==== Hydraulics Rodoxd Tv Dspfx Aaaor - Hydraulic pump: Rexroth SYDFE2x/071R-PPA.. - Motor power: 15 kW - Operating pressure: max. 200 bar - Pressure accuracy: ± 5 bar - Oil tank volume: approx. 475 l - Hydraulic oil: HLP 36 ==== Electrical System - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection: 15 kW - Total connected load: approx. 21 kW ==== Control System - Siemens Simatic S7-634 - Operation via control panel - Functions: - Ram up / down - Ram tilting - Table traverse - Ejector control - Adjustable press force ==== Features - Tiltable ram plate: 180° (up to 7.5 t tilted) - Ejector in ram: 5.6 t / 160 mm stroke - Stroke extension: +300 mm - Increased speed feature ==== Documentation - Hydraulic schematic - Electrical schematic - Technical drawings - Data sheet ===== Spotting, tool tryout, tool adjustment, mould making, tool making, tryout processes Spotting press, tool tryout press, tryout press, tool adjustment press, tool tryout press, sample press, hydraulic press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are designed and manufactured according to the German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they comply in all points with the Brazilian national safety guideline NR 12, which builds on these requirements. Our greatest strength is special machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. The hydraulics are predominantly equipped with components from leading European manufacturers.

Condition: excellent (used), foot-operated, water-cooled rocker arm spot welding machine Brand: DALEX Model: easyspot 35 Rated power at 50% duty cycle: 25 kVA Redpfx Aaeyxp Rpjaer Secondary short-circuit current: 22.4 kA Secondary open-circuit voltage: 5.1 V Electrode force: 17-278 daN Arm spacing: 140 or 300 mm Throat depth: 180-500 mm with attached control cabinet according to VDE 0100 Synchronous welding control Main switch

Condition: good (used), Year of construction: 1995, Rated power: 63 kVA Redpswurw Rjfx Aaaer Thrust: 520 mm Electrode arm distance: 200 mm Welding capacity for steel: approx. 7 + 7 mm Welding capacity for non-ferrous metals: approx. 2 + 2 mm Electrical connection: 380 V kW

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition Rodoycv Sajpfx Aaaor

Condition: ready for operation (used), DALEX welding unit CGW 405 Redpfx Aaoipvrfsajr Wire feeder DV 2.3 Hose adapter 10 m Connector of the hose package must be re-clamped Weight 310 kg

Condition: good (used), Water cooled TIG welder Kjellberg KU 262 Technical data see photos Instruction manual available Rodpfjg Tvvrox Aaaor

Condition: not inspected (used), Year of construction: 1991, functionality: unexamined, machine/vehicle number: 14098/91, short-circuit current: 1,200 A, overall weight: 3,000 kg, total width: 2,400 mm, total height: 2,700 mm, total length: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the machine within the period from 08.04.26 to 16.04.26! MACHINE DETAILS Electrical data Electrode force: 26,550 N Operating voltage: 380 V Connected load: 474 kVA Rated power: 3 x 50 kVA Rated current: 228 A Secondary voltage: 3.5 - 6.3 V Secondary rated current: 17,400 A Short-circuit current: 1,200 A Secondary short-circuit current: 92,000 A Mains frequency: 50 Hz Dimensions & weight Dimensions (L x W x H): 2,500 x 2,400 x 2,700 mm Redpfx Ajyk Up Tjaajr Weight: 3,000 kg External reference: 15

Condition: good (used), Year of construction: 1988, machine/vehicle number: 03105, clearance between the columns: 1,300 mm, table width: 1,200 mm, table length: 1,500 mm, Weight: approx. 16,000 kg, table size: approx. 1500x1200 mm, distance between top plate and bottom plate max is 1550mm, with sliding table and separate control/operating panel Redpetdnnmsfx Aaaor

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Rated power at 50% duty cycle: 20 kVA Max. welding power: 40 kVA Throat depth adjustable from 280 to 550 mm Electrode stroke: 15 to 85 mm Welding capacity for steel sheet approx. 4 + 4 mm Electrode force adjustable up to 240 daN Cooling water flow: 3 l/min Weight approx. 122 kg Rsdpfeyv Aqwox Aaajr Welding controller T 90 Mark II Operating instructions and manual included Work stroke triggered via pneumatic foot pedal

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 03.010.00, clearance between the columns: 1,620 mm, table width: 1,600 mm, table length: 1,800 mm, ram plate width: 1,600 mm, ram plate length: 1,800 mm, overall weight: 22,000 kg, stroke length: 1,800 mm, pressing force: 200 t, Try-Out Press with Injection Unit – Manufacturer: Reis – from Automotive Production For sale is a try-out press with integrated injection unit from Reis. The machine comes from the ongoing production of a renowned automotive manufacturer at the Berlin site. All maintenance and service intervals have been carried out regularly. The system is currently under power and can be demonstrated in a production environment. Despite its year of manufacture, the machine is in excellent technical condition and has been well maintained. It is particularly suitable for precise spotting and adjustment work in tool and mould making. Viewing is possible at any time by appointment. Dismantling and loading are the responsibility of the buyer. On request, we can provide dismantling, loading and transport arrangements at additional cost. Below are the technical specifications of the offered machine: ##### Technical Data + Information: TUS 160 OK – 200 ####General Information - Designation: Try-Out Press with Injection Unit TUS 160 OK - 200 - Type: Vertical / Column Type - Manufacturer: REIS - Serial No.: 03.010.00 - Year of manufacture: 1981 - Total weight: 22 t ####Press Force - Press force (Ram): 200 t - Press force (Ejector): 30 t - Operating pressure: 200 bar - Accumulator: No. 05015 ####Machine Body - Design: 4-column / sheet frame - Hydraulic cylinder: 1 - Diameter: Ø 360 mm - Arrangement: vertical, top mounted ####Table - Table size: 1800 x 1600 mm ####Clamping Table T-slots: - Number: 5 - Form: T-slot - Dimensions: 22 DIN 650 - Bolt Ø: M 20 ####Ram Maximum stroke: 1800 mm Retraction force: 70 t ####T-slots: - Number: 5 - Form: T-slot - Dimensions: 22 DIN 650 - Bolt Ø: M 20 ####Ejector - Ejector stroke: 190 mm (over clamping plate) ####Pump - Power requirement: 22 kW - Flow rate: 122 l/min - Speed: 1450 rpm Redeyluivepfx Aaajr (Try-Out Press, Spotting Press, Test Injection Press, Hydraulic Press, Hydraulic Press Machine) ##### Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised quote. Our hydraulic presses are manufactured in accordance with German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Moreover, our presses exceed Canadian and European safety standards as they fully comply with Brazilian national safety directive NR 12, which builds on these. Our core strength is custom machine building and press automation. We offer bespoke hydraulic presses, press brakes and guillotine shears at surprisingly competitive prices. We primarily use components from leading European manufacturers for the hydraulic systems of our presses.

Condition: like new (used), Year of construction: 2021, – Year of manufacture 2021 (the machine has never been used) – Capacity 20 kVA – Pneumatic – Control TE101 – Cooling Redpfxjytr N No Aaaor – Documentation – 400V

Condition: new, machine/vehicle number: DF0178, pressing force: 500 t, pressure:500 t table length:3500 mm table width:3500 mm stroke max.:3600 mm dimensions:8500 x 3700 x 8500 mm return capacity:50 t weight:250 t Fold-down upper tool:180 Grad :max. 33 mm/sec table extendable:3800 mm :33 mm/sec table load:100 t power capacity:65 kW voltage:400 V control voltage:24 kW frequency:50 Hz work speed:0 - 10 mm/sec. pre-running speed:0 - 10 mm/sec return speed:0 - 25 mm/sec :0 - 10 mm/sec :800 l Ram Height:1300 mm table height:700 mm :inklusiv ? Redpfx Aasfxyh Uoasr :inklusiv ? :inklusiv ? :inklusiv ?

Condition: new, Year of construction: 2019, machine/vehicle number: DF0309, pressing force: 200 t, pressure:200 t table length:2500 mm table width:2000 mm stroke max.:2050 mm Rsdpfx Aaefxyi Doajr dimensions:ca. 9200 x 4700 x 5800 mm draw back pressure:25 t Approx. weight (w/o operational materials):50 t column diameter:210 mm table speed:25 mm/sec table extendable:2000 mm table speed:30 mm/sec table load:15 t power capacity:20 kW work speed:1 - 10 mm/sec. pre-running speed:10 mm/sec :25 mm/sec :10 mm/sec. Oil Tank Capacity:400 l Oil cooling (electric):1,5 kW (max) Podestal height:650 mm Table Height:800 mm Ram Height:850 mm Control System by Siemens:S7 1200 Monitor:WEG 12 Zoll :10200 ? Maintenance Balcony:5000 ? :4.000,-- ? :1.000,-- ? :18000 ? :1.500,-- ? :12000 ? Upper Tool Folding:170 Grad Swivel table:75 Grad Table tiltable:75 Grad Ajecters with 60T in the pestle centre:12000 ? Blessed plate folding by 180 degrees:14000 ?

Condition: new, machine/vehicle number: DF0261 - Rev.00, pressing force: 63 t, pressure:63 t table length:1200 mm table width:1000 mm stroke max.:1050 mm dimensions:ca. 3350 x 1800 x 4700 mm draw back pressure:6 t Approx. weight (w/o operational materials):10 t Redpfx Aefhcc Ssaaer column diameter:120 mm Fold-down upper tool:180 Grad Swivable Table:75 Grad table speed:25 mm/sec Table tilting:75 Grad table extendable:1100 mm table load:5 t Engine Output:10 kW Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max) Monitor:(WEG) 12 Zoll

Condition: as good as new (ex-display), Year of construction: 2015, pressing force: 63 t, pressure:63 t table length:700 mm table width:1000 mm weight of the machine ca.:ca. 9 t dimensions of the machine ca.:4500 x 4300 x 2700 m :1 Stück stroke length max.:1200 mm daylight dimension : table/slide up:1200 mm table height:700 mm :um 1200 mm :um 45 Grad :um 170 Grad :1250 x 1000 mm Rjdpfx Aajffamqjaor table load:5 t :25 mm/sec pre-running speed:95 mm/sec return speed:80 mm/sec work speed:von 0 bis 10 mm/sec.