Used Spring Wind for sale (17,728)

Condition: used, mileage: 170,503 km, power: 114 kW (155.00 HP), overall weight: 8,500 kg, fuel type: diesel, axle configuration: 2 axles, gearing type: mechanical, first registration: 06/1993, Equipment: ABS, all wheel drive, crane, Well-maintained Unimog U1650 with a Palfinger PK 105 crane with 3x hydraulic extensions, 1x mechanical and a maximum working height of 15 meters and a 5th + 6th control circuit (e.g. for grabs, shovels) plus a cable winch on the crane. The vehicle is approved as a LOF. * Palfinger PK 10500 * 3x hydraulic extensions * Working height 15 m * Side extension Csdoxycnbspfx Aflsaa * 2.50 m ? 3,940 kg * 4.30 m ? 2,250 kg * 6.10 m - 1,520 kg * 7.80 m - 1,140 kg * 9.60 m - 940 kg * Mechanical extensions * 11.60 m ? 740 kg * Additional control circuit on the crane for rotary servo, gripper * 4x support * High seat and floor control * Wood grapple including 2 additional bowls for an additional charge * 3 seater * All-wheel drive with differential locks * Stainless steel exhaust system switchable * Trailer coupling * Reversing gear 8 F + 8 R gears * Air driver's seat * Additional hydraulics at the front * Additional hydraulics at the rear * Registration as a self-propelled work machine possible * Total mileage 170,503 km * Financing through our partner banks possible, we are happy to help you. We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. Information about accessories is provided without guarantee. Subject to changes, prior sale or errors. We offer and strongly recommend an inspection and inspection so that the buyer does not have any false impressions about the condition and suitability. Inspections and inspections are possible at any time by appointment and are expressly desired.

Condition: used, mileage: 48,671 km, power: 174 kW (236.57 HP), first registration: 10/1992, overall weight: 12,500 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,800 mm, loading space height: 1,600 mm, total width: 2,500 mm, total height: 3,100 mm, Equipment: parking heater, A proper Iveco Magirus with 4x4 all-wheel drive and hydraulic Rotzler winch. Air-cooled V8 naturally aspirated diesel engine – extremely robust and powerful. 2x rear and center differential locks, rear extension for the winch, 5t towing capacity, 10t via rear extension with pulley. Tow bar with 12.0t ring eyelet and continuous braking system. 7 seats registered, various new parts, 10 Rx 22.5 tires. Freshly serviced with fuel filter replacement, air dryer cartridge replaced, starter batteries replaced, wheel brakes and all fluids lubricated and checked. Hydraulic clutch fluid and windshield wiper blades also replaced. We will deliver the Iveco with a fresh MOT/AU and H-certificate upon request. = +500€ The GVW is 12.5t. The curb weight is approximately 8.0 t, so the 120-23 cannot be reduced to 7.5 t. The V8 diesel engine and 5-speed transmission run smoothly, Cedpfxex A N Sfo Afleaa the car is easy to drive. Top speed according to the documents = 93 km/h Bag dimensions: 3870 x 2490 x 1600 mm (LxWxH) +++ Errors, changes, and prior sale are reserved.

Condition: excellent (used), functionality: fully functional, mileage: 265,170 km, power: 162 kW (220.26 HP), first registration: 02/2011, overall weight: 7,490 kg, axle configuration: 4x2, empty load weight: 4,900 kg, fuel: diesel, wheelbase: 4,200 mm, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space width: 2,500 mm, loading space length: 5,400 mm, Year of construction: 2011, Equipment: cable winch, trailer coupling, MAN TGL 8.220 / Trailer / Winch / Remote control / Payload: 8,290 kg • Manufacturer: MAN • Model: TGL 8.220 • Mileage: 265,170 km • First registration: 02/2011 • Power: 162 kW / 220 hp • Winch: Ramsey, electric • Radio remote control • Trailer hitch • Loading ramps • Loading platform: 5.40 meters • Axle configuration: 4x2 • Wheelbase: 4.20 meters (between 1st and 2nd axle) • Transmission: 6-speed manual • Suspension: leaf/air • Differential lock Cjdpfx Afsxwbw Aelsaa • Capacity: 3-4 cars • Euro 5 emission standard • Curb weight: 4,900 kg • Payload: 2,590 kg • Gross vehicle weight: 7,490 kg ----- Trailer • Manufacturer: Silver • Model: SRBP10 • First registration: 02/2006 • Loading platform: 9.70 meters • Suspension: air/air • Curb weight: 4,300 kg • Payload: 5,700 kg • Gross vehicle weight: 10,000 kg • German vehicle • German documents • Immediately available for operation • This offer is non-binding and subject to prior sale. - Intermediate sale reserved - Errors and/or typographical mistakes excepted - Sale in accordance with our general terms and conditions.

Condition: used, Year of construction: 2007, Tenoning spindle 3 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Control 100 PC SCM Windor 100 CNC still in operation, available for inspection until the end of December 2025 ----- Powerful and flexible CNC manufacturing system for windows and doors Processing of workpieces up to a maximum length of 4500 mm, width of 250 mm, and thickness of 150 mm Consists of a Windor 60 model B Infeed conveyor Slotting section: ----- Item 1: Miter saw ----- - Motor 4 kW - 3000 rpm - Spindle diameter 40 mm - Maximum tool diameter 400 mm, bore 80 mm Item 2: 1st slotting spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - Locking device "Jolly" Csdpfx Afow Im Iisljaa - Continuous vertical positioning - Interpolating rotations, automatic inclined window adjustment +/- 60 degrees Item 3: Electric spindle with HSK 63 F tool holder ----- - Min/max. Rotation speed 1000-12000 rpm - Maximum motor power 11 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Item 4: 2nd slotted spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - "Jolly" locking device - Continuously variable vertical positioning - Interpolating rotations, automatic inclined window device +/- 60 degrees Item 5: 3rd slotted spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - Locking device "Jolly" - Continuous vertical positioning Fleximat ----- Including left and right stops with horizontal CNC adjustment for the following through-feed operations: Lock case milling and 9-degree anuba drilling from the right. Dowel drilling and strike plate marking from the left and right, 7 spindles each. Cup hinge drilling and olive drilling from the top. Profile part ----- Item 5: Power 2000 F4: Electric spindle with HSK 63 F tool holder ----- - Working from the left - Min/Max. Rotation speed 1000-18000 rpm - Maximum motor power 12 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Item 6: 1st profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Continuously variable vertical positioning - Continuously variable horizontal positioning Item 7: 2nd profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Continuous vertical positioning - Continuous horizontal positioning Item 7: 3rd profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Continuous verti...

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 1,700 mm, type of input current: AC, total width: 750 mm, total length: 900 mm, overall weight: 300 kg, input voltage: 230 V, table load: 15 kg, year of last overhaul: 2025, ambient temperature (max.): 30 °C, ambient temperature (min.): 12 °C, maximum load weight: 20 kg, Equipment: documentation/manual, lighting, type plate available, Fully factory-refurbished and modernized multisensor coordinate measuring machine Mahr MS222 with a modern 64-bit CNC controller and Windows 11, including 12 months warranty and full support from the specialized service company. The measuring device has been completely factory overhauled and reconditioned, equipped with a modern new controller and the latest version of our measurement software. The measuring system will be delivered and set up at the customer’s site for the above-mentioned price. Additional optional services: On-site commissioning / calibration Training Custom measurement programming for immediate start of part inspections Complete package includes: Measuring machine 64-bit CNC controller Industrial PC with Windows 11 Perpetual software license OptiCheck3D 2025 (full license of the measurement software with no subscription or maintenance contract) Multisensor head with high-resolution industrial camera Renishaw TP20 touch probe system (alternatively TP200 system available) including one standard force module Caedpewcxb Ssfx Aflea Calibration artifact Acceptance certificate / calibration certificate (pre-shipment condition) Free delivery within Germany (EU and international shipping available on request) Specifications: Measuring range: 200 x 200 x 200 mm Load capacity: 10 kg on glass plate Scale resolution: 0.1 µm Max. travel speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine weight: 170 kg Control cabinet weight: 90 kg Accuracy according to VDI/VDE 2617 Sheet 6, ISO 10360-2: U1 = 1.9 + L/200, U2 = 2.2 + L/150, U3 = 2.9 + L/100

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Caodpfxoxw Ux Hj Aflsa Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: excellent (used), color: red, mast type: telescopic, Year of construction: 2012, Year of manufacture: 2012 Body brand: LIEBHERR LTR 1100 CE marking: yes Technical condition: very good Visual condition: very good Price: On request Codpfx Aeuxvz Tefleaa HYDRAULIC WINCH FOR LIEBHERR LTR 1100 CRANE YEAR OF MANUFACTURE 2011/2012 1.3 t CE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK SPANISH WE SPEAK ENGLISH

Condition: used, mileage: 30,457 km, power: 169 kW (229.78 HP), first registration: 07/1994, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 10/2016, gearing type: mechanical, loading space width: 2,450 mm, loading space length: 5,300 mm, loading space height: 1,450 mm, total width: 2,450 mm, total height: 3,150 mm, Equipment: all wheel drive, compressor, well-maintained rescue vehicle RW2 on MAN 12.232 with 4x4 all-wheel drive and 8-speed manual transmission (rare) Cjdpfsx A N Tiox Aflsaa +++ original only 30,470 km directly from a South German fire department and fully functional +++ on request TÜV new with H - certificate Hydraulic cable winch 5t, built-in generator 20 KVA with light mast at the rear, tow bar ring eye 12t, differential lock middle and rear, driver's cab with 3 seats, roof hatch and electric mirror adjustment Dimensions: 5300 x 2450 x 1450 (LxWxH in mm) Wheelbase (axle distance): 3650mm technically and visually in good condition - ready to drive +++ Errors, changes and prior sale reserved

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm Codpfxet R T Hcs Afleaa - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: used, mileage: 222,226 km, power: 188 kW (255.61 HP), first registration: 02/1985, overall weight: 22,000 kg, fuel type: diesel, color: red, axle configuration: 3 axles, gearing type: mechanical, Year of construction: 1985, Equipment: all wheel drive, Iveco-Magirus 260-25 ANW Tanker Truck VIN: M04011621 Chassis / Attachments: - Wheelbase: 3,860 mm // 1,400 mm - Leaf suspension - Tires: Front = 385/65 R22.5 // Rear = 315/80 R22.5 - Tread depth remaining: Front approx. 80%, Rear approx. 80% - 1 x diesel tank - 1 x hydraulic tank - HPC winch (HYK6.5FW), 6.5 t - AP axles - Reversing camera Superstructure: - Water tank - 1 compartment - Uraca pump (170 bar pressure) - 1 x hydraulically swiveling hose reel Cabin: - 2 seats - Window in rear wall Engine / Transmission: - 12,675 cc // 256 hp / 188 kW / Euro 0 / V8 - 8-speed double-H gearbox - Transfer case - Differential lock Weights: - Gross weight: 22,000 kg - Unladen weight: 12,050 kg - Payload: 9,950 kg Other Features: - German vehicle New technical inspections / safety inspections or modifications to permissible gross weight are available on request. We are happy to assist you in obtaining export/transfer license plates, as well as arranging delivery of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Changes, prior sale, and errors reserved! ---- Csdjv H H Dwjpfx Aflsaa Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On 11,000 sqm, you will find a wide range of vehicles. Our company philosophy is characterized by fairness and integrity. Because customer satisfaction is very important to us, we offer our clients an excellent all-round service package and provide them with a competent point of contact who will assist them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We are happy to assist you with loading your purchased vehicles. Organization of specialized transport We are happy to assist you in organizing specialized transport. Temporary/export license plates We are happy to assist you in obtaining export/temporary license plates. Handling customs formalities We are happy to assist you with handling customs formalities.

Condition: used, mileage: 616,254 km, power: 324 kW (440.52 HP), overall weight: 26,000 kg, fuel type: diesel, color: blue, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro5, loading space width: 2,480 mm, loading space length: 6,200 mm, loading space height: 800 mm, first registration: 05/2012, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, parking heater, soot filter, MAN 26.440 TGX Flatbed + PK 34002 Crane 6x2 Csdpexv Hwrsfx Afloaa Suspension: Air-air Wheelbase: 5.10 m PAFINGER crane Type: PK34002 SH Year: 2012 Operating hours: 3447 h 9x hydraulic extensions + JIB 4x hydraulic outriggers 1x remote control - Mechanical operation - Continuous rotation Flatbed: Length: 6.20 m Width: 2.48 m Height: 0.80 m Equipment: - Retarder with 6 stages - Digital tachograph - Heated seats - 2x beds - Cooling box - Heated seats - Radio-CD - Lift and steer axle - Lane assist - Electric windows - Roof air conditioning - Sun visor - Hands-free system - Tow coupling (2x air-ABS-power connections) We are also happy to assist you with financing or leasing through our partners. All information without guarantee. Errors and prior sale excepted.

Condition: used, functionality: fully functional, empty load weight: 1,130 kg, maximum load weight: 2,370 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 09/2027, loading space length: 8,300 mm, loading space width: 2,100 mm, tire size: 195/55 R 10 C, tire condition: 100 %, color: silver, Object number #30618 Full aluminum Alloy wheels Tires 195/55 R 10 C approx. 100% Knott axles Body length (inside): 8,300 x 2,100 mm Electric cable winch Synthetic fiber winch rope 2-channel remote control Electric spare wheel holder Rear support legs Lashing points every 80 mm 4x aluminum wheel chock brackets Loading height 580 mm Ramp angle 9° 2 loading ramps 2x toolboxes Codpfx Afexyp Smjljaa Leasing or financing available upon request!!

Condition: used, mileage: 262,933 km, power: 375 kW (509.86 HP), overall weight: 36,000 kg, fuel type: diesel, color: white, axle configuration: 8x2, maximum load weight: 16,660 kg, empty load weight: 19,340 kg, tire size: 315/70 22,5, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 15 m³, loading space width: 2,480 mm, loading space length: 6,400 mm, loading space height: 950 mm, Year of construction: 2018, operating hours: 262,933 h, first registration: 02/2018, next inspection (TÜV): 11/2025, total length: 6,400 mm, tire condition: 40 %, front tire size: 315/70 22,5, rear tire size: 315/70 22,5, Equipment: ABS, air conditioning, crane, cruise control, differential lock, navigation system, onboard computer, parking heater, trailer coupling, truck registration, Reference number for inquiries: 69205 DAF, XF 510 * Year of manufacture: 2018 * ABS, anti-lock braking system * Trailer coupling * EBS, electronic braking system * Air conditioning * Crane Casdpovv Dy Uofx Aflea * Cool box * Air suspension * Navigation system * Auxiliary heater * Stationary air conditioning * Cruise control * On-board computer * Differential lock * Long-distance transport > 7.5 t * Refrigerator * Electric windows and mirrors * Central locking with remote control * 2 beds * Distance control assistant * Remote control * Inspections: HU / AU valid until 11/2025 * Transmission type: Automatic * Suspension: Leaf / air * Gross vehicle weight: 36,000 kg * Unladen weight: 19,340 kg * Payload: 16,660 kg * Permissible gross weight: 36,000 kg * Tyre condition, 1st axle: 40% -- 40% - Tyre size: 315/70 R22.5 * Tyre condition, 2nd axle: 40% -- 40% - Tyre size: 315/70 R22.5 * Tyre condition, 3rd axle: 40%|40% -- 40%|40% - Tyre size: 315/70 R22.5 * Condition of spare tyre: 40% * Tyre sizes: 315/70 R22.5 * Internal load area dimensions: L=6400 mm, W=2480 mm, H=950 mm * Internal volume*: 15 m² * Pallet spaces: 16 * Palfinger PK 34002 * Outrigger: Jib 6+3 hydraulic + 2x mechanical * 4-point stabilizer * Large aluminium storage box * Multilock side rail body * Cable winch Disclaimer: Subject to change, prior sale, and errors. You can find more pictures and videos on our homepage. Our comprehensive services include e.g.: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Handling of all (export) documents * Provision of export license plates / customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transportation of commercial vehicles Feel free to contact our trained staff – we will be happy to advise you.

Condition: used, mileage: 63,521 km, power: 174 kW (236.57 HP), first registration: 02/1992, overall weight: 12,500 kg, color: blue, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,800 mm, loading space height: 1,600 mm, total width: 2,500 mm, total height: 3,100 mm, Equipment: parking heater, A proper Iveco Magirus with 4x4 all-wheel drive and hydraulic Rotzler winch. Air-cooled V8 naturally aspirated diesel engine – extremely robust and powerful. 2x rear and center differential locks, rear extension for the winch, 5t pulling capacity, 10t via rear extension with pulley. Tow bar with 12.0t ring eyelet and continuous braking system. 7 seats registered, various new parts, 10x22.5 tires. Cedpfsx A N R Ujx Aflsaa Freshly serviced with fuel filter replacement, air dryer cartridge replaced, starter batteries replaced, wheel brakes and all fluids lubricated and checked. Hydraulic clutch fluid and windshield wiper blades also replaced. The front inner fenders were professionally welded by us, and the outer chassis parts and rims were repainted. The Iveco will be delivered by us with a fresh MOT/AU and, upon request, with a new MOT/AU. H-approval submitted, = +500€ The GVW is 12.5t, the curb weight is approximately 8.0t – the 120-23 cannot therefore be reduced to 7.5t. The V8 diesel engine and the 5-speed transmission run well, the car can be driven without any problems. Top speed according to the documents = 93 km/h Body dimensions: 3870 x 2490 x 1600 mm (LxWxH) +++ Errors, changes, and prior sale are reserved.

Condition: excellent (used), functionality: fully functional, mileage: 381,412 km, power: 163 kW (221.62 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, overall weight: 11,990 kg, empty load weight: 7,235 kg, maximum load weight: 4,755 kg, first registration: 01/2013, next inspection (TÜV): 10/2025, loading space length: 5,700 mm, loading space width: 2,800 mm, emission class: euro5, suspension: steel-air, brakes: engine braking, Year of construction: 2013, Equipment: air conditioning, cable winch, DAF LF 45/Sliding Platform/Tow Bar/Winch • Manufacturer: DAF • Model: LF45 • Mileage: 381,412 km • First registration: 01/2013 • Power: 163 kW / 222 HP • Drive configuration: 4x2 • Transmission: Manual gearbox • Engine brake • Recovery supports • 2x Winches • Tow bar • Suspension: leaf/air • Body: Valinski ETV5001R • Platform length: 5.70 m • Platform width: 2.80 m • Air conditioning • Cruise control • TÜV valid until 22 October 2025 • Unladen weight: 7,235 kg • Payload: 4,755 kg • Gross vehicle weight: 11,990 kg • Emission standard: EEV 1 • German vehicle Caedexgt Nvopfx Afloa • German documents • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos excepted. - Sale in accordance with our general terms and conditions.

Condition: used, mileage: 306,127 km, Year of construction: 2013, Equipment: ABS, air conditioning, cruise control, traction control, - Electronic Braking System (EBS) - ESP (Electronic Stability Program) - Power steering - Stability control = Additional options and equipment = - Differential lock = Notes = DB ACTROS 4146 AK MP3 8x8 Crane Truck with Fassi 660 Loading Crane / Wire Rope Winch and Rotating Servo !! SINGLE TIRES !! • All-wheel drive • Full leaf suspension • EURO 5 • Telligent 16-speed manual transmission with clutch pedal • Air conditioning • Reinforced engine brake • Cruise control • Auxiliary heater / Stand heating • Hill-start assist • 2 x differential locks • Switchable ABS • Signal horn • Roof bar with LED work lights • Beacon lights • Multifunction steering wheel • Radio CD player • Telephone • Tires: 395/85 R20 • Good tire tread! • Unladen weight: 22,544 kg • Gross weight: 32,000 kg (36,000 kg technically possible!) • Trailer coupling (mouth-type) • Max. trailer load: 12,500 kg • 2-line trailer braking system • Overall vehicle length: 10,600 mm Superstructure: FASSI 660 XD Type F600A / 660 AXP 24 • Radio remote control • 4 hydraulic extensions • Hydraulic rotator • Hydraulic winch • 4-point hydraulic outriggers • 10 ton spreader beam • Flatbed body by MÜLLER with drop sides Special equipment: 2-line trailer brake, Trailer coupling: G 150, Trailer socket 24V / 15-pin, Brushed steel dashboard, Audio system: CD radio (Bluetooth incl. integrated telephone), 220 Ah battery, Compressed air horn(s) on cab roof, Cab: Reinforced cab shock absorber, Cab: Movable cab access, Cab: Comfort suspension (1.8 Hz), Construction site vehicle filter, 100 A alternator, Fuel tank: 400 litres, Reinforced clutch, Reinforced cooling, PTO MB 10C, Programmable special module, Rotating beacon left/right, Side windows with thermal insulation glass, Circuit breaker, Driver's cab seats: Comfort suspension seat with horizontal suspension, Sun visor, Sun roller blind side windows, Driver's and passenger door, Voltage converter 24V / 12V 15A, Reinforced rear axle stabilizer, 12V socket, Steel front bumper, Drawbar for trailer coupling, Additional thermal insulation, Auxiliary water heater, Transmission oil cooler Other features: 2nd steering front axle, Emission standard EURO 5, Axle configuration: 8x8/4, Front axle load 9.0 t, Trailer coupling: Tow hitch, Vertical exhaust behind the cab, Mirrors electrically adjustable and heated, Steel roof hatch, Rear axle differential lock, Front axle differential lock, Cab: S (short), Suspension: leaf/leaf, Electric windows, 16-speed gearbox, Rear axle H 7, 13 t, 300 crown wheel, Hydraulic pump (Meiller pump - 6 pistons), Body/chassis: chassis for tipper (additional AV), Body/chassis: tipper, Model update from 06/2008, Engine 12.0 L - 335 kW V6 diesel (OM 501 LA), Engine brake with constant throttle, Wheelbase 4800 mm, Rear window, Telligent gearshift, Telligent brake system with ABS, drum brake front and rear, Transfer gearbox with differential lock, CB radio preparation, Telephone/fax preparation, Immobilizer, Thermal insulation glass, Central locking Csdpfxewmn Tls Afloaa Cab: ...

Condition: used, Year of construction: 2009, operating hours: 6,300 h, Equipment: all wheel drive, MANITOU Telehandler MRT 2150 PRIVILEGE + Winch Model: MRT 2150 Lifting capacity: 4,999 kg Power: 110 kW Cajdpfxexa I Uto Aflsa Color: blue 4x hydraulic outriggers + winch + pallet fork + all-wheel drive We are also happy to assist you with financing/leasing options in cooperation with our partners. All information is provided without guarantee. Subject to errors and prior sale.

Condition: like new (used), functionality: fully functional, empty load weight: 950 kg, maximum load weight: 2,550 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 03/2027, loading space length: 8,300 mm, loading space width: 2,100 mm, tire size: 195/55 R 10 C, tire condition: 90 %, color: silver, Object number #30617 Full aluminium Caedjxyp R Nspfx Afloa Alloy wheels Tyres 195/55 R 10 C approx. 90% Knott axles Superstructure internal dimension: 8,300 x 2,100 mm Electric cable winch Synthetic fibre winch rope 2-channel remote control Electric spare wheel carrier Rear support legs Lashing points every 80 mm 4x aluminium wheel chocks Loading height 580 mm Ramp angle 9° 2 loading ramps 2x tool boxes 100 km/h road approval Leasing or financing available on request!!

Condition: used, mileage: 262,933 km, power: 375 kW (509.86 HP), first registration: 02/2018, overall weight: 36,000 kg, fuel type: diesel, color: white, axle configuration: 8x2, maximum load weight: 16,660 kg, empty load weight: 19,340 kg, tire size: 315/70 22,5, next inspection (TÜV): 11/2025, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 15 m³, loading space width: 2,480 mm, loading space length: 6,400 mm, loading space height: 950 mm, Year of construction: 2018, operating hours: 262,933 h, total length: 6,400 mm, tire condition: 40 %, front tire size: 315/70 22,5, rear tire size: 315/70 22,5, Equipment: ABS, air conditioning, crane, cruise control, differential lock, navigation system, onboard computer, parking heater, trailer coupling, truck registration, Reference number for inquiries: 692051 DAF, XF 510 * Year of manufacture: 2018 * ABS, Anti-lock Braking System * Trailer coupling * EBS, Electronic Braking System * Air conditioning * Crane * Coolbox * Air suspension * Navigation system * Auxiliary heater (parking heater) * Stationary air conditioning * Cruise control * On-board computer * Differential lock * Long-haul transport > 7.5t * Refrigerator * Electric windows and mirrors * Central locking with remote control * 2 sleeping bunks * Adaptive cruise control (distance control assistant) Caodpovv Dy Iefx Aflea * Radio remote control * Inspections: General inspection/emissions (HU/AU) valid until 11/2025 * Transmission type: Automatic * Suspension: Leaf/Air * Gross vehicle weight: 36,000 kg * Unladen weight: 19,340 kg * Payload: 16,660 kg * Perm. gross weight: 36,000 kg * Tyre condition 1st axle: 40% -- 40%, Tyre size: 315/70 R22.5 * Tyre condition 2nd axle: 40% -- 40%, Tyre size: 315/70 R22.5 * Tyre condition 3rd axle: 40%|40% -- 40%|40%, Tyre size: 315/70 R22.5 * Tyre condition, spare tyre: 40% * Tyre size: 315/70 R22.5 * Internal dimensions: L = 6,400 mm, W = 2,480 mm, H = 950 mm * Internal volume*: 15 m³ * Pallet spaces: 16 * Palfinger PK 34002 crane * Jib extension: 6 + 3 hydraulic, 2x manual * 4-point support * Large aluminium toolbox * Multilock side rail superstructure * Winch Disclaimer: Subject to changes, prior sale and errors excepted. More pictures and videos are available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Handling of all (export) documents * Procurement of export / customs plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV approvals, registration service * Delivery/transfer of commercial vehicles Please ask our trained specialist staff – we are happy to advise you.

Condition: used, mileage: 168,824 km, power: 130 kW (176.75 HP), first registration: 01/1997, overall weight: 11,990 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 05/2026, gearing type: mechanical, Equipment: crane, Very well-maintained special vehicle: Iveco 12-ton truck equipped with Meiller RK 7 055 hook lift system and crane body, MKG HLK 95 crane with 5 extensions, outreach up to 13 meters, remote control, cable winch, slew servo with grab control, leaf-spring suspension, manual gearbox, Rockinger towing jaw with pneumatic connections, beacon lights, work lights, and much more. Short cab with rear window Drive: 4x2 Wheelbase: approx. 3.70 meters Payload: 6,100 kg Unladen weight: 5,890 kg Meiller RK 7 055 hook lift with detachable crane container Container internal dimensions: approx. 3.05 m x 2.47 m x 0.50 m high MKG HLK 95 a3 loading crane, foldable at the rear Crane with 5-stage extension 3 hydraulic sections and 2 mechanical extensions Remote control Cable winch Lifting capacity (according to manufacturer): approx. 3.78 m / 2,510 kg 5.38 m / 1,630 kg 7.38 m / 1,200 kg 9.18 m / 960 kg With additional 2 mechanical extensions: approx. 11.13 meters / 730 kg 13.08 meters / 460 kg Slew servo and grab control Double outrigger, fully hydraulic swing-out supports Front and rear axles with leaf-spring suspension 8-speed manual gearbox Casdpex Ax I Asfx Aflsa Rear axle differential lock Rockinger towing jaw with pneumatic connectors Engine brake 2 beacon lights on the cabin roof 2 work lights on the cab roof Plastic toolbox, left side exterior Radio Driver’s seat, air-suspended German vehicle in very well-maintained condition UVV inspection for crane and hook lift renewed 06/2025 Net price plus 19% VAT. Attractive financing options available upon request. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2555_1

Condition: used, mileage: 227,782 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,820 mm, overall weight: 7,490 kg, empty load weight: 4,840 kg, maximum load weight: 2,650 kg, first registration: 09/2005, next inspection (TÜV): 08/2026, loading space length: 5,500 mm, loading space width: 2,500 mm, emission class: euro3, color: white, driver cabin: other, suspension: other, number of seats: 2, maximum speed: 90 km/h, fuel: diesel, number of beds: 1, Equipment: ABS, additional headlights, air conditioning, cruise control, differential lock, immobilizer system, onboard computer, trailer coupling, * Well-maintained German vehicle * Vehicle ID number: WDB9702271L060587 * Valid roadworthiness test (HU) until Technical Data: * Overall length: 8,400 mm * Overall width: 2,500 mm * Overall height: 2,950 mm * Wheelbase: 4,820 mm * Permissible total weight: 7,490 kg * Curb weight: 4,840 kg * Payload: 2,650 kg Loading area: * Length: 5,500 mm * Width: 2,500 mm * Loading height: 1,050 mm Special Equipment: * Trailer brake (2-line system) * Trailer coupling: Towing coupling * Trailer coupling: Central axle trailer G 250 * Trailer socket 12V / 13-pin * Trailer socket 24V / 15-pin * Audio system: Radio Truckline CD 65 / 70 incl. CD drive * Reinforced battery Cjdpfxsxviwhe Afleaa * Long-distance cab * Cab: reinforced shock absorber * Electric window lifts * Cruise control * Spare wheel holder, side-mounted * Rear lights for tail lift installation * Air conditioning * Engine brake with constant throttle * Tail lift switch * Side windows rear left/right * Reinforced rear axle stabilizer (for extremely high loads) * Steel rims 6.75x17.5 * 24V cab socket * Cross member for trailer coupling * Auxiliary heater (air) Standard Equipment: * Emission standard Euro 3 * Axle configuration: 4x2 * Electrically adjustable and heated exterior mirrors * Roof hatch (steel) * Cab: L (long) * 80 A alternator * 6-speed gearbox - type: G 56-6 * Rear axle H 2, crown wheel 325 * Interior filter: pollen filter * Body/chassis: chassis * Fuel tank: 125 liters * Model update: Atego 2 * Engine: 4.3 liter – 130 kW diesel (OM 904 LA) * Wheelbase: 4,820 mm * Disc brakes * Side underrun protection * Cab seats: passenger seat, fixed * Cab seats: driver's seat, standard suspension seat * Telligent brake system with ABS * Fixed rear underrun guard * Immobilizer * Permitted total weight: 7.49 t Nationwide delivery within Germany possible!!! Trade-in possible!!! Leasing and financing also possible without down payment. Errors, misprints, and prior sale excepted.

Condition: ready for operation (used), GMN TSE 75 cdu x 200/30000 high speed spindle, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Casdji Eaa Repfx Aflea

Condition: used, mileage: 168,824 km, power: 130 kW (176.75 HP), overall weight: 11,990 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, first registration: 01/1997, next inspection (TÜV): 05/2026, Equipment: crane, Very well-maintained special vehicle: Iveco 12-ton truck with Meiller RK 7 055 hook-lift system and crane skip, equipped with MKG HLK 95 crane with 5 extensions, reach up to 13 meters, radio remote control, cable winch, swivel servo and grab control, leaf-spring suspension, manual gearbox, Rockinger tow hitch with air brake connections, rotating beacons, work lights, and much more. Short cab with rear window Drive: 4x2 Wheelbase approx. 3.70 m Payload: 6,100 kg Unladen weight: 5,890 kg Meiller hook-lift system RK 7 055 with removable crane skip Internal skip dimensions approx. 3.05 m x 2.47 m x 0.50 m (height) MKG loader crane HLK 95 a3, foldable at the rear Crane with 5 extensions 3 hydraulic and 2 mechanical extensions Radio remote control Cable winch Lifting capacity approx. 3.78 m / 2,510 kg – 5.38 m / 1,630 kg – 7.38 m / 1,200 kg – 9.18 m / 960 kg (manufacturer specs) Lifting capacity with additional 2 mechanical extensions: approx. 11.13 m / 730 kg – 13.08 m / 460 kg Swivel servo and grab control 2-stage support, fully hydraulic, extendable swing-out outriggers Front and rear axles with leaf springs 8-speed manual gearbox Rear axle differential lock Rockinger tow hitch with air brake connections Engine brake 2 rotating beacons on cab roof Casdpfx Afox Ax I Noloa 2 work lights on cab roof External plastic tool box, left side Radio Air suspended driver's seat German vehicle in very well-maintained condition UVV inspection for crane and hook-lift system renewed in 06/2025 Price NET plus 19% VAT. Attractive financing options available upon request. All information subject to change. Errors and prior sale reserved. Internal vehicle number: 2555_1

Condition: used, mileage: 227,782 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,820 mm, overall weight: 7,490 kg, empty load weight: 4,840 kg, maximum load weight: 2,650 kg, first registration: 09/2005, next inspection (TÜV): 08/2026, loading space length: 5,500 mm, loading space width: 2,500 mm, emission class: euro3, color: white, driver cabin: other, suspension: other, number of seats: 2, maximum speed: 90 km/h, fuel: diesel, number of beds: 1, Equipment: ABS, additional headlights, air conditioning, cruise control, differential lock, immobilizer system, onboard computer, trailer coupling, * Well-maintained German vehicle * Vehicle ID number: WDB9702271L060587 * Valid roadworthiness test (HU) until Technical Data: * Overall length: 8,400 mm * Overall width: 2,500 mm * Overall height: 2,950 mm * Wheelbase: 4,820 mm * Permissible total weight: 7,490 kg * Curb weight: 4,840 kg * Payload: 2,650 kg Loading area: * Length: 5,500 mm * Width: 2,500 mm * Loading height: 1,050 mm Special Equipment: * Trailer brake (2-line system) * Trailer coupling: Towing coupling * Trailer coupling: Central axle trailer G 250 * Trailer socket 12V / 13-pin * Trailer socket 24V / 15-pin * Audio system: Radio Truckline CD 65 / 70 incl. CD drive * Reinforced battery * Long-distance cab * Cab: reinforced shock absorber * Electric window lifts * Cruise control * Spare wheel holder, side-mounted * Rear lights for tail lift installation * Air conditioning * Engine brake with constant throttle * Tail lift switch * Side windows rear left/right * Reinforced rear axle stabilizer (for extremely high loads) * Steel rims 6.75x17.5 * 24V cab socket * Cross member for trailer coupling * Auxiliary heater (air) Standard Equipment: * Emission standard Euro 3 * Axle configuration: 4x2 * Electrically adjustable and heated exterior mirrors * Roof hatch (steel) * Cab: L (long) * 80 A alternator * 6-speed gearbox - type: G 56-6 * Rear axle H 2, crown wheel 325 * Interior filter: pollen filter * Body/chassis: chassis * Fuel tank: 125 liters Caodpfxexviqbj Aflsa * Model update: Atego 2 * Engine: 4.3 liter – 130 kW diesel (OM 904 LA) * Wheelbase: 4,820 mm * Disc brakes * Side underrun protection * Cab seats: passenger seat, fixed * Cab seats: driver's seat, standard suspension seat * Telligent brake system with ABS * Fixed rear underrun guard * Immobilizer * Permitted total weight: 7.49 t Nationwide delivery within Germany possible!!! Trade-in possible!!! Leasing and financing also possible without down payment. Errors, misprints, and prior sale excepted.

Condition: used, mileage: 168,824 km, power: 130 kW (176.75 HP), first registration: 01/1997, overall weight: 11,990 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 05/2026, gearing type: mechanical, Equipment: crane, Very well-maintained special vehicle: Iveco 12-ton truck with Meiller RK 7 055 hooklift system and crane skip, MKG HLK 95 crane with 5 extensions, outreach up to 13 meters, radio remote control, cable winch, rotary servo grab control, leaf spring suspension, manual transmission, Rockinger towing hitch with air brake connections, rotating beacons, work lights, and much more. Short cab with rear window 4x2 drive Wheelbase approx. 3.70 meters Payload 6,100 kg Unladen weight 5,890 kg Codpfx Afsx Ax Ivjleaa Meiller hooklift RK 7 055 with removable crane skip Internal skip dimensions approx. 3.05 m x 2.47 m x 0.50 m (H) MKG loader crane HLK 95 a3, foldable at rear Crane with 5 extensions 3 x hydraulic extensions and 2 x mechanical extensions Remote control Cable winch Lifting capacity at approx. 3.78 m / 2,510 kg // 5.38 m / 1,630 kg // 7.38 m / 1,200 kg // 9.18 m / 960 kg (manufacturer's data) Lifting capacity with additional 2 mechanical extensions at approx. 11.13 m / 730 kg // 13.08 m / 460 kg Rotary servo and grab control 2-point stabilizer with fully hydraulic extendable swing outriggers Front and rear axle with leaf suspension 8-speed manual gearbox Differential lock on rear axle Rockinger towing hitch with air brake connections Engine brake 2 rotating beacons on cab roof 2 work lights on cab roof Plastic tool box, left exterior Radio Air-suspended driver's seat German vehicle in very well-maintained condition UVV inspection for crane and hooklift newly performed in 06/2025 NET price plus 19% VAT. We are happy to provide attractive financing offers. All information provided without guarantee. Subject to errors and prior sale. Internal vehicle number: 2555_1