Used St 251 for sale (14,773)

Condition: like new (used), functionality: fully functional, Year of construction: 2022, battery capacity: 625 Ah, remaining battery capacity: 100 %, battery voltage: 24 V, total length: 825 mm, total width: 325 mm, total height: 630 mm, overall weight: 448 kg, Forklift battery 24V 5PzS625, battery 100% TESTED Year of manufacture: 2022 Weight approx. 448kg Gksdpfxoy N T Dbs Akhed Dimensions: 825mm x 325mm x 630mm Battery serviced and tested by a specialized company Capacity test (C5 discharge test): 651/625 Ah battery Remaining capacity: 100% With Aquamatik filling system (BFS) With pole screws but WITHOUT end discharge cable

Condition: not inspected (used), Year of construction: 2015, functionality: unexamined, machine/vehicle number: 150436, turning length: 1,000 mm, total length: 3,200 mm, total width: 1,200 mm, total height: 1,900 mm, overall weight: 3,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828 D, PINACHO ST-225 Lathe - Center height above bed: approx. 260 mm - Swing over bed: approx. 520 mm - Center height above carriage: 180 mm - Swing over carriage: approx. 360 mm The machine is equipped with a tailstock and an 8-position tool turret, tool holder: VDI 30, including a 3-jaw chuck, diameter: 200 mm Gedpfe Afup Sex Akhskd FCA D-94227 Zwiesel - loaded onto a truck.

Condition: ready for operation (used), Siemens 6SN1125-1AA00-0EA0 LT module SN:T-P32033992, the item has been refurbished and has a 3-month warranty, used, normal signs of wear, 100% functional, scope of delivery as per photos Gsdpexahgpjfx Akhskd

Condition: used, saw blade diameter 275 mm cutting diameter 90 mm Gkodpfjd Ih Tajx Akhed stroke mm capacity 45 degrees: flat 150 x 100 mm cutting speed 16/32 m/min miter cut 45 ° total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: ready for operation (used), Siemens 6SN1125-1AA00-0DA0 Lt-Module Version: A SN:T-PN2029425. The item has been refurbished and comes with a 3-month warranty, used, normal signs of wear, 100% functional, delivery as shown in the photos. Gkedpfxex Eu H Aj Akhed

Condition: ready for operation (used), Kontron CP6500-V / 31.251-1010.1/L01 control unit / CPU SN: 252935022, used, good condition, 100% functional, scope of delivery as per photos Gsdex Et Dmjpfx Akhskd

Condition: new, empty load weight: 480 kg, maximum load weight: 820 kg, overall weight: 1,300 kg, loading space length: 2,510 mm, loading space width: 1,530 mm, loading space height: 450 mm, tire size: 195/50R13C, Lowering trailer with dropside kit from trailer manufacturer STEMA model WOM XT - STS XT O2 13-25-15.1. A Senkomat or lowering lift trailer is often purchased by motorcyclists. It is well suited for one or two motorcycles, but also for quad bikes, ATVs, lawn mowers and small machines. A three-sided perforated railing and a perforated profile in the middle of the floor secure the load. The trailer is lowered using a manual hydraulic system. The car trailer is characterized by its user-friendliness and stability. Gkjdoq Ru S Dspfx Akhjd The standard equipment of the lowerable car trailer includes the three-sided perforated railing, removable attachment, lashing profile in the middle of the floor, support wheel, fold-down license plate holder, manual hydraulics, sturdy welded frame, hot-dip galvanized and a V-drawbar. As accessories we have motorcycle rockers, motorcycle stand rails, tarpaulin and frame, side wall attachment, 100 km/h damper and TÜV, tool box, motorcycle lashing straps, lashing straps and trailer lock.

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 305.537.1992, warranty duration: 12 months, Le Meccanica CLM630ST 630/150 die and rolls Force Feeder with a 0.9KW motor Gkodpfev Sq Rlsx Akhed Currently undergoing full refurbishment - Seals &bearings included Colour - customers option Customer to arrange collection and freight

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, scorer, Horizontal panel dividing saw / Horizontal panel saw with lifting table feed Manufacturer: SCM / Gabbiani Type: Gabbiani ST 115 Year of manufacture: 2018 Horizontal beam saw with lifting table feed from the rear, originating from a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lifting table approx. 1850 mm Max. stack height on the lifting table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed 0 - 135 m/min. Variable sliding table speed 0 - 70 m/min. Motor of the main saw blade approx. 9 kW Gjdpfxozyx Evs Akhokd Main saw blade speed 3900 rpm Saw blade diameter 400 mm Motor of the scoring saw approx. 1.8 kW Scoring saw speed 6300 rpm Scoring saw blade diameter 160 mm 6 clamping devices (3 of which with front aligner) 2 air cushion tables, each with blower Voltage: 400 V, 3 phases, 50 Hz, 43 A Weight approx. 5500 kg Data partially estimated and taken from the brochure.

Condition: used, mileage: 11,143 km, power: 80 kW (108.77 HP), first registration: 03/2011, fuel type: diesel, empty load weight: 3,060 kg, maximum load weight: 1,940 kg, overall weight: 5,000 kg, axle configuration: 4x4, wheelbase: 2,300 mm, brakes: other, color: white, driver cabin: day cab, gearing type: other, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 1,750 mm, loading space width: 1,250 mm, operating hours: 1,400 h, Equipment: air conditioning, all wheel drive, cabin, differential lock, fog lights, immobilizer system, onboard computer, power assisted steering, soot filter, * German vehicle * First owner * Original, only 11,143 km * Only 1,400 operating hours * All-wheel drive 4x4 hydrostatic drive * All-wheel steering, switchable * Condition, see photos * BOKI HY1251 with winter service equipment * Front sweeper KIF, type BOKI * Sweeping width up to 1,500 mm * Common spreader, type STA 1000 S FS * Hopper volume 1.0 m³ and 430 liters of wet salt * Steel 3-way tipper * Loading area dimensions: Length 1,750 mm x Width 1,250 mm * High front wall * DIN tie-down points Godjz St Stjpfx Akhokd * Front lift with municipal hydraulics and electrical connection * Hydraulic and electrical connection at the rear * Comfortable cab with rear window and 2 seats * Air conditioning * Differential lock * Joystick control * Windshield heating * Sliding windows on the right and left * All-round warning lights * Leaf spring suspension * Wheelbase: 2,300 mm * GVWR: 5,000 kg * Unladen weight 3,060 kg * Payload: 1,940 kg * In the event of a sale to commercial enterprises and for export (non-EU and EU), the German commercial law applies. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods, so that no false ideas arise about the condition and suitability with the buyer. Inspection and examinations are possible at any time after arranging an appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: used, functionality: fully functional, mileage: 473,000 km, first registration: 04/2014, fuel type: diesel, Tractor unit, automatic transmission, retarder, refrigerated box Gjdoyhv Ulopfx Akhskd

Condition: good (used), Year of construction: 2011, Swing 806mm, maximum cutting diameter 533mm, 762mm between centres, 660mm maximum cutting length, 76mm Bar capacity, 254mm 3 jaw chuck, 22.4kW Spindle Motor, 3400rpm spindle, 12 Station turret, Gksdpfxsywuvhe Akhed tailstock, coolant, tool setter.

Condition: reconditioned (used), Haas ST-30 CNC Lathe / Turning Centre (2015) Haas Classic CNC Control Standard chuck diameter: 254 mm / 10″ Maximum turning diameter: Up to 533 mm Maximum cutting length: 660 mm Bar capacity: 76 mm / 3″ Spindle bore: 88.9 mm Maximum spindle speed: 3,400 rpm Maximum spindle power: 22.4 kW / 30 hp Standard maximum spindle torque 407 Nm at 500 rpm Spindle nose: A2-6 X-axis travel: 318 mm Z-axis travel: 660 mm Rapid traverse, X and Z: 24 m/min Tool turret” 12 stations Swing over front apron: 806 mm Swing over cross-slide: 527 m Gkjde Agn Dcjpfx Akhod Supplied With: Three-jaw power chuck, 12-station tool turret with assorted holders, Tailstock with centre, Fully enclosed machining area, Haas control with colour screen and handwheel. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79298 Machine Serial Number: 3103531 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, mileage: 15,224 km, power: 76 kW (103.33 HP), first registration: 08/2001, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,550 kg, empty load weight: 1,950 kg, tire size: 205/75 R 16C, driver cabin: day cab, gearing type: other, emission class: euro2, suspension: steel, total length: 3,650 mm, total width: 1,360 mm, total height: 2,200 mm, number of seats: 2, Equipment: ABS, all wheel drive, cabin, differential lock, low noise, Vehicle location: Bovenden, steel superstructure, Kz. Haus, swing seat, rear window, heated mirrors, ABS (anti-lock braking system), tachograph, differential lock, leaf suspension, low-noise G1, winter service equipment, 2-axle Body: Spreader body. Front-wheel steering, rear-wheel steering, all-wheel steering, dog clutch. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gksdpfevhk H Sox Akhsd - .

Condition: used, Year of construction: 2011, functionality: fully functional, nominal heat output: 850 kW (1,155.68 HP), tank capacity: 7,350 l, Equipment: documentation/manual, hot water, type plate available, Hot water boiler system Polzenith 850 kW – Year of manufacture 2011 – fully functional For sale is a hot water boiler system from the manufacturer Polzenith, manufactured in 2011. The system is currently in operation and fully functional. It will be available from mid-2027. Technical data • Manufacturer: Polzenith • System type: Hot water boiler system • Machine type: 05.617 • Year of manufacture: 2011 • Rated thermal output: 850 kW (more depending on the fuel) • Water volume: 7,350 liters • Special function: LUVO 3 (oxygen control via lambda sensor) • Electrical connection power: 55 kW / 125 A • Electrical rated power: 58 kW / 120 A • Electrical documentation: available • Operating condition: fully functional, currently in operation • Overall condition: The system is in used condition, appropriate for its age. • Expected availability: from mid-2027 Scope of offer The following system components are included in the offer: • Hot water boiler • Chimney • Ash auger & scraper (without container) • Fuel feed system • Fuel bunker with four hydraulic slides • Pressure maintenance • Automatic make-up water supply Not included in the offer • External water storage tank • Dismantling of the system and all components • Transport and delivery Dismantling and collection The dismantling of all components will be carried out on site by the buyer. The handover of the system is expected to be possible from mid-2027 after prior coordination. Gjdpe Aaz Ecsfx Akhokd Inspection and contact An inspection of the system is possible after prior appointment arrangement, as long as it is still in operation. If you are interested or have any questions, please do not hesitate to contact us.

Year of construction: 2019, condition: excellent (used), travel distance X-axis: 239 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 826 mm, bar passage: 76 mm, center width: 826 mm, spindle speed (max.): 3,400 rpm, CNC lathe Manufacturer: Haas Model: ST-30Y Year of manufacture: 2019 Control: Haas Technical Data: Max. swing diameter: 533 mm Max. machining diameter (with BMT 65): 349 mm Distance between centers: 826 mm Bar capacity: max. 76 mm Travel distances: X-axis travel: 239 mm Y-axis travel: +/- 51 mm Z-axis travel: 826 mm Main spindle: Spindle speed: 3,400 rpm Drive power: 22.4 kW Turret: Number of tool stations: 12 positions Tool holder: BMT 65 Rapid traverse rates: Rapid traverse (x, y, z): 12 / 12 / 24 m/min Gkodpo Agrmujfx Akhsd Technical features & accessories: - Driven tools (C-axis) - Automatic tool presetting arm - Coolant tank - Coolant pump - Chip conveyor - 254 mm chuck - Tailstock Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, length of the outfeed table: 980 mm length of the infeed table: 980 mm table width: 170 mm maximum blade size: 300 mm minimum blade size: 295 mm Gsdpfx Akj Afwzbjhokd diameter of the blade mounting hole: 30 mm integrated dust extraction system adjustable cutting head angle: -45 to +45 degrees motor power: 1.2 kW adjustable height of the upper table upper table dimensions: 400x300 mm CE marking year of manufacture: 2006

Condition: used, Year of construction: 2018, Working width: 2,500mm, air flow rate: 1,600m³/h, motor power: 1.5kW. Equipment: integrated under-table extraction system, radial fan with spark protection, filter elements below the wooden grate, pneumatic filter cleaning, direct air recirculation, wooden grate with defined gap spacing, galvanized and painted sheet steel, integrated motor protection switch and compressed air supply, CE marking. On-site inspection is possible. Gedpfxjz R A Nro Akhskd

Condition: refurbished (used), functionality: fully functional, warranty duration: 6 months, electrical fuse: 16 A, input voltage: 400 V, year of last overhaul: 2025, Dough divider for bread dough weights from 250 to 1,650 grams. Completely overhauled with a revised dough chamber. Capacity: 960 pcs/hour or 16 pieces per minute. Gksdpfx Aox Ahm Uekhjd

Condition: good (used), Year of construction: 2021, operating hours: 1,118 h, functionality: fully functional, HSM baling press, type HL 7009 ST/A, year of manufacture 2021 Technical data: Godpj Ah R Nmofx Akhskd Manufacturer: HSM Type: HL 7009 ST/A Year of manufacture: 2021 Operating hours: 1118 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x D) Bale weight: up to 600 kg Tying: 4-way horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard, film Note: The press is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: excellent (used), Year of construction: 2019, operating hours: 6,300 h, functionality: fully functional, machine/vehicle number: 311539, With a 310 mm diameter chuck with 3-jaw operation Jorgensen conveyor and coolant system Standard technical data Spindle Chuck: 12 inches (305 mm) Bar capacity: 102 mm Spindle nose: A2-8 Maximum speed: 3,200 rpm Power: 40 hp (≈30 kW) Machining capabilities Maximum turning diameter: 533 mm Maximum cutting diameter: 349 mm Maximum turning length: 826 mm Maximum distance between centers: 826 mm Axis travels X: 239 mm Y: ±50.8 mm (total travel 102 mm) Z: 826 mm Gsdpfx Akszzw Npehskd Turret and powered tools 12-position turret Powered tools Integrated C-axis for milling, drilling, and tapping Rapid traverse rates X: 12 m/min Y: 12 m/min Z: 24 m/min Subject to errors and omissions, this data is provided without any commitment.

Condition: excellent (used), Year of construction: 2019, HAAS ST-15 cnc lathe Year: 2019 Chuck Size 210 mm Max Part Swing 419 mm Max Cutting Diameter (with BOT turret) 305 mm Max Cutting Length (varies with workholding) 406 mm Bar Capacity 64 mm Travels specifications Travels X Axis 200 mm Z Axis 406 m Rapids on X 30.5 m/min Rapids on Z 30.5 m/min Spindle Nose A2-6 Max Rating 15 kW Max Speed 4000 rpm Max Torque 203.0 Nm 500 rpm Spindle Bore ø 88.9 mm Tailstock taper MT3 Hydraulic Quill Travel 95 mm Manual Body Positioning 508 mm Weight 3600 kg Gkedpoz Tlafjfx Akhsd Accessories/options: - Renishaw tool measuring arm - Foot pedals - Tool holders - Spare parts Under power test is available at anytime!

Condition: good (used), Year of construction: 1989, machine/vehicle number: 8906756, functionality: fully functional, actuation type: pneumatic, overall weight: 84 kg, GRASS BBM /ST with adapter for BLUM fittings Row drilling unit – hinge plate drilling – drilling for base plates – drilling for press-in dowels – adapter for pressing in the hinge plates and base plates. Gkjdpfx Akszvn N Nohsd

Condition: excellent (used), Year of construction: 2007, operating hours: 5,500 h, functionality: fully functional, turning length: 1,545 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, total height: 2,600 mm, total length: 5,200 mm, total width: 2,550 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Multi-Tasking Machining in a Single Machine Setup Gsdpfx Ajz Ar R Dokhekd Sub spindle for overtaking with full C-Axis 0,001 Degrees 5500 Cutting hours ! The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Indramat TVM 2.4W1/220/380 power supply, serial no.: 251874-07661, used, in good condition, 100% fully functional, scope of delivery as per photos. Gkedpfx Ajy Nrxkokhod