Used Staircase Formwork for sale (105)

Condition: good (used), Year of construction: 2014, Stairs / Staircase with intermediate landing – used: Price: €2,500 (net), disassembled, packed, and loaded at the location! Item 1 Manufacturer: Stow Type: unknown Nedpfxjzqz T Dj Ah Sjdc Year of manufacture: 2014 Ground floor to landing: approx. 14 steps (the 14th step is at the level of the landing) Landing to upper floor: 11 steps (the 11th step is at the level of the upper floor) Distance between steps: approx. 18.5 cm Width: approx. 1.25 m With intermediate landing Steps: galvanized grating Stringers and handrail painted Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, Various staircases – used: Price per step: €95.00 (net), disassembled, packed, and loaded at the storage location! Pos 2+3: Wide, with 6 steps Pos 4: Wide, with 6 steps Pos 7: Narrow, with 13 steps and a “door” Pos 9+10: Wide, with 14 steps Pos 11: Wide, with 15 steps Pos 13: Wide, with 13 steps Pos 13a: Wide, with approximately 7 steps Manufacturer: Stow Type: unknown Year of manufacture: 2014 Steps: Galvanized grid grating Stringers and handrails painted Condition: good Nsdpfx Ahezqz Sae Sedc Available: approximately Q4/2026 Location: Hamburg

Condition: new, Year of construction: 2025, Construction staircase, suitable for use on any construction site. 2 units available in stock. Can be assembled by one person in 15 minutes. Two staircases can be mounted on top of each other. Njdpfx Aozhhl Ijh Sedc Half-turn staircase, left + right. A complete staircase can be stored on a Euro pallet.

Condition: good (used), Year of construction: 2014, Staircase/stairwell with intermediate landing – used: Ndjdezqz Syopfx Ah Ssc Price: €2,000 (net), disassembled, packed, and loaded at the location! Item No. 4 Manufacturer: Stow Type: unknown Year of manufacture: 2014 Approximately 10 steps from the ground floor to the landing Further data will be determined Width: approx. 1.25 m With intermediate landing Steps: galvanized grating Stringers and handrails painted Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: new, Year of construction: 2025, functionality: fully functional, Stair milling machine for mortising treads and risers into stringers and posts. The machine is equipped with a high-frequency milling motor. The machine is brand new. 400 V, 50 Hz. Nedpfx Aeyxzacjh Sedc

Condition: good (used), Year of construction: 2014, Staircase/stairwell with intermediate landing – used: Price: €2,500.00 (net), dismantled, packaged, and loaded at the location! Item No. 12 Manufacturer: Stow Type: unknown Year of manufacture: 2014 From ground floor to landing: approx. 10 steps (with the 1st step at the level of the landing) From landing to upper floor: 12 steps (with the 12th step at the level of the upper floor) Distance between steps, presumably approx. 18.5 cm (to be confirmed) Width: to be confirmed With intermediate landing Steps: galvanized grating Ndsdpfx Ajzqz Smsh Soc Stringers and handrail painted Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, large staircase with 2 intermediate levels – used: Price: €4,000 (net), disassembled, packaged, and loaded at the location! Item No. 14 Manufacturer: Stow Type: unknown Year of construction: 2014 Distance between steps will be provided later. Width of the staircase will be provided later. Dimensions of the landings will be provided later. Ground floor to landing 1: Number of steps will be provided later. Landing 1 to landing 2: approx. 14 steps Landing 2 to upper floor 2: With 2 intermediate levels Ndsdpfjzqz I Uex Ah Soc Steps: galvanized grating Stringers and handrails painted Condition: good Available: from approx. end of Q4/2026 Location: Hamburg

Condition: used, Year of construction: 2023, Manufacturer: Ilapak Italia S.p.A. (IMA Group) Year: 2023 Type: Complete bagging line LINE-UP 1. Belt conveyor – Service PTNMSX 2. Z-type lift with cleats – Service PTNMSX-Z 3. 14-head combination weigher – Ilapak Weightronic WA 14/50 4. Vertical form-fill-seal (VFFS) bagging machine – Ilapak Vegatronic VT2000 OF P 5. Stainless steel platform (gantry) – FQS Maximum line dimensions: 4.81 x 3.00 x 7.35 m (H) (technical data sheet) Designed for use in cold/damp environments (deep-frozen products) 1. VEGATRONIC VT2000 OF P VERTICAL BAGGING MACHINE Vertical form-fill-seal (VFFS) bagging machine, Open Frame version Forming tube and neck Vertical longitudinal seal Horizontal cross-seal jaws with integrated cutting blade Film drive via belts Bag length controlled by encoder Maximum mechanical output: 70 bags/min Film reel: Max. Ø: 600 mm Width: 400 mm Core: Ø 76 mm Max. weight: 50 kg Current format: Ø 170 mm (can be changed on request) HMI touch-screen control 2. WEIGHTRONIC WA 14/50 MULTIHEAD WEIGHING MACHINE 14 heads – 1 pre-dosing basket + 1 weighing basket per head 15 load cells: 14 weighing baskets + 1 beneath the central cone Central distribution cone Electromagnetic radial vibrating channels, which can be dismantled without tools Ouverture des paniers par moteurs pas à pas – cames paramétrables Timing hopper Unloading via 4 removable chutes into the outlet hopper Maximum speed: 90 strokes per minute Bucket capacity: 5.0 l Volume maximal de vidange (par déversement) : 12,5 l Plage de poids de vidange (par déversement) : 100 g - 3 000 g Maximum length of parts: 150 mm Modes: weighing or piece counting, mixing of up to 4 batches, multiple discharge per bag Automatic tare and calibration Ilapak HMI touchscreen Control of up to 4 external feeders Contact parts that can be removed without tools and are numbered per head AXIS F1035-E surveillance camera above the weighing machine – real-time display on the HMI (augmented reality mode) 3. PRODUCT POWER SUPPLY ( SERVICE) PTNMSX belt conveyor: - AISI 304 stainless steel frame - Modular PP belt - Effective width: 533 mm - Effective length: 2405 mm - Loading/unloading height: 3080 mm - Speed: 22 m/min - SEW SA37 gear motor – 0.37 kW – IP65 - Power supply: 400 V three-phase – 50 Hz - Wash ramp with 10 nozzles PTNMSX-Z Z-lift: - AISI 304 stainless steel structure - Modular PP belt with cleats – pitch 203.2 mm - Effective width: 403 mm - Effective length: 5,300 mm - Loading height: 2,660 mm - Unloading height: 5,215 mm - Speed: 24 m/min - SEW SA47 gear motor – 0.75 kW - Power supply: 400 V three-phase – 50 Hz - Stainless steel loading hopper - Inspection hatches Conveyor control via the bagging machine control cabinet 4. FQS GANTRY PLATFORM Stainless steel tubular structure designed for washing Weighing machine support above the bagging machine Staircase with stringers and steps made of folded sheet metal Stainless steel handrails Bolted assembly (dismantlable) DOCUMENTATION AVAILABLE EC Declarations (production lines and machinery) Declarations of incorporation for conveyors User manuals (FR / IT) Risk assessments (FR) Electrical and pneumatic diagrams Illustrated parts lists (IPB) Recommended spare parts lists (RSPL) Ndodpfx Aj Ad Rv Eeh Sjc Food contact certificates Equipment dismantled and stored on Osertech's premises.

Condition: used, 2 x LTW channel lining Height: 1.50 meters Width: 3.00 meters Nsdpfx Ahoz Atayj Sjdc Channel width: 90 - 140 cm

Condition: used, Doka-Framax Xlife formwork Nodpfj Acf Umex Ah Sedc - New price: Net €514,000.00 - Starting price: €58,000.00 - Detailed information can be found under the photos.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Showroom / steel structure, Floor height: 3,300 mm. Roof height: 8,450 mm. Width at the bottom: 20,000 mm. Width at the top: 22,150 mm. Doors: yes, various single and double doors. Bridge width: 2,950 mm. Glazing: included, all around. Staircase: diameter 3,300 mm, fully demountable. Facade columns: diameter 250 mm. Staircase columns: diameter 300 mm. Will be disassembled and loaded onto trucks. Ndodpez Ayatofx Ah Sec

Condition: used, Channel lining Height: 2.40 meters Width: 3.40 meters Ndjdpfxjz Atbqs Ah Sjc Channel width: 1.10 - 1.60 meters

Condition: good (used), Steel staircase, exterior staircase, extension staircase -Steel staircase: Add-on staircase with treads and railings on both sides -Width: 880 mm -Step spacing: approx. 200 mm -Dimension of top step: 1940 mm -Transport dimensions: 3880/880/H970 mm Ndsdpfxerg Ivbe Ah Soc -Weight: 150 kg

Condition: ready for operation (used), Year of construction: 2023, operating hours: 3,200 h, functionality: fully functional, machine/vehicle number: 189, power: 310 kW (421.48 HP), fuel tank capacity: 500 l, TECHNICAL DETAILS Cutter drum with teeth: 30 Areas of application: Waste/Wood/Green waste MACHINE DETAILS Engine power: 310 kW (405 hp) Fuel tank capacity: 500 l Electrical system: 24 V Hydraulic connections: 35-80 l/min Permissible total weight: 27,000 kg Load capacity protection: Three-sided Operating hours: 3,200 h EQUIPMENT Overband magnet Shredder drum with 30 teeth Caterpillar engine Load-dependent system Centrally arranged lubrication strips 24 V electronic control with additional electric pump Complete radio remote control Large maintenance doors on the sides Service-friendly engine compartment Hydraulically reversible fan Folding hopper Service staircase Acoustic start-up warning Doppstadt telematics system Special shredder system size L 600/4 - 30 Z Ndodpfxjym U E Hj Ah Soc Additional hydraulic connections Hydraulic drive Discharge conveyor Frame with overband magnet Magnet and combs

Condition: used, Mobile assembly platform, Workmaster, podium ladder, platform staircase ZARGES type Z-53796 Aluminum ladder, access ladder Year of manufacture: 2016 Platform height: approx. 45 / 73 / 1000 mm Platform size: 1700 x 600 mm - 3 steps + podium - Aluminum construction - Foldable staircase with 200 mm deep steps and non-slip surface - Platform with non-slip surface - Movable on swivel casters, 4 swivel casters with locking mechanism - Lowering device on the stringer as a central brake - Assembly platform foldable, can be disassembled for transport Space required L / W / H: 2600 x 740 x 1940 mm Transport dimensions L / W / H: 2000 x 950 x 670 mm Weight: 54 kg Ndjdpeznrquofx Ah Soc Very good condition, like new

Condition: good (used), Scope of delivery includes: 01x Steel staircase Material color: yellow Floor height: approx. 1,890 mm Projection: approx. 2,650 mm Total width: approx. 1,208 mm Stringer profile: 200 x 5 mm Railings: on both sides Handrail and knee rail: rectangular tubing Steps: smooth Step dimensions: 1,108 x 250 mm Number of steps: 11 steps Riser height: approx. 180 mm Overall stair length: approx. 3,320 mm End stop: L-profile: 100 x 55 mm Note: The steel staircases are partially assembled and partially unassembled. The images are for material illustration purposes only. The steel staircases are picked and shipped unassembled. This is a used item; scratches, dents, and signs of use may be present. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Njdpovntb Sjfx Ah Sjdc General information about the item: This item is offered for collection only. If transport or shipping is required, this is subject to additional costs which can be requested from us depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 2,000 mm Projection: approx. 2,550 mm Total width: approx. 1,225 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,210 x 270 mm Number of steps: 10 steps Step height: approx. 175 mm Total length of the staircase: approx. 3,700 mm End stop: L-profile: 65 x 110 mm The end stop of the steel staircase is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel staircases were partially assembled Ndedpfxovnr Rrs Ah Sec and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Year of construction: 2014, Set of 4 modular office units, room-in-room system, two-story, including staircase, approx. 139m2 – used: Price ex-works: €19,950 (net), disassembled, packed, and loaded! Item no. 11: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, likely 2014 Roof accessible, with a maximum load capacity of 100kg Element width: approx. 1.03m Length including staircase: total approx. 14.51m Width of “gap” for the staircase: approx. 1.27m Right block, top and bottom: Length: approx. 4.60m (4 elements and one narrow element) Left block, top and bottom: Length: approx. 8.64m (8 elements) Depth approx.: 5.28m (5 elements) Ground floor height: approx. 2.70m Total height approx. 5.40m 4 doors All offices are closed on three sides and therefore stand with one side against the hall wall Includes lighting, etc., as available Ground floor without flooring, upper floor with flooring Sale excludes furniture, etc. Condition: good Available: from approx. Q4 / 2026 Location: Hamburg Nodpfx Ahjzqzuue Ssdc

Condition: good (used), Year of construction: 1998, functionality: fully functional, Staircase milling machine. For sale due to new 5-axis CNC machine. Milling length mm 4,750 Milling width mm 900 Clearance height mm 150 Table length mm 6,000 Head rotatable by ° 70 Grooving head tiltable by ° 90 Number of heads 1 Main motor kW 4 Design: Stationary machine Nsdoiwa Rkepfx Ah Sedc Adjustment: Program control Laser alignment: Single laser CE marking: Yes Weight approx. kg 2,250 Availability: Short notice, from current location Fully functional For sale due to new 5-axis CNC machine. Additional pictures can be provided. Training will be provided upon pick-up (easy to learn). Milling staircase stringers: possible to process one staircase in 1 hour. Long stringers, up to 470 cm, can be milled without any problems. 4 pressure bars included. Adjust rise, adjust step thickness, adjust slope (takes about 1 minute in total) and you are ready to go. The machine automatically moves from one step to the next. Still in excellent condition and suitable for use as an emergency milling machine.

Year of construction: 2012, condition: used, Three-story, modular container system manufactured by PLATAL Mobilsysteme GmbH in 2012, previously used as a school building with classrooms, ancillary rooms, and sanitary facilities. Manufacturer: PLATAL Mobilsysteme GmbH Year of manufacture: 2012 Construction: Modular container system Previous use: School and sanitary facilities Overall dimensions (L × W × H): approx. 36,000 × 15,760 × 10,200 mm Floors: 3, identical in construction Total number of container modules: 72 units Container module type 1: 36 units, each 3,000 × 6,500 mm Container module type 2: 36 units, each 3,000 × 9,260 mm Module height: 3,400 mm Sanitary areas: 3, one per floor Exterior staircases: 2 steel exterior staircases with grating steps and landings Nedpfez N Ex Tjx Ah Sedc Equipment: Windows with exterior roller blinds, radiators, suspended grid ceilings, lighting, electrical installations, and sanitary areas Room layout: Classrooms, corridors, ancillary rooms, and sanitary areas

Condition: used, functionality: fully functional, load capacity: 350 kg, Price: Please submit a serious offer. We are offering for sale two robust and complete industrial mezzanines, ideal for optimizing and creating additional space in a warehouse, workshop, or commercial premises. First mezzanine – 4.5 m × 21.5 m – Height 6 m, i.e., 3 m per level * Dimensions: 4.5 m × 21.5 m * Area per level: 96.75 m² * Installation on 2 levels * Total area: 193 m² * 2 staircases included * 30 mm wooden flooring * Guardrails included * Price: Please submit a serious offer – Delivery possible Second mezzanine – 4.5 m × 17.7 m – Height 6 m, i.e., 3 m per level * Dimensions: 4.5 m × 17.7 m * Area per level: 79.65 m² * Installation on 2 levels * Total area: 159 m² * 2 staircases included * 30 mm wooden flooring Nedpfx Aez Tdilsh Sodc * Guardrails included * Price: Please submit a serious offer – Delivery possible This set is particularly suitable for warehouses, storage facilities, workshops, offices, or commercial activities, offering significant potential for creating additional space without extending the building.

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment. Special drilling machine for staircase construction, window construction, and universal applications through pneumatic height adjustment. Angled dowelling and picket drilling can be easily realized thanks to the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the processing height, dowelling on two levels without adjustment The desired drilling heights can be set for each drilling level using a handwheel and digital counter; the changeover is then carried out pneumatically from the front Cross adjustment approx. 320mm, stepless or in a 12mm grid Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, can be placed at the front and rear of the table 2 swiveling workpiece supports Ndjdjyfta Topfx Ah Soc 2 side stops, can also be used as a front support Chassis Dust extraction connection 80mm 4 used but good drill bits 9, 12, 16, 19mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is very rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200mm (L x W x H), weight 310kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this seller".

Condition: used, Stainless steel platform, 9.2 m², with stairs and railing This robust industrial structure meets the highest hygiene and load requirements and is ideal for use in the food industry, pharmaceuticals, chemicals, or agriculture. Thanks to the integrated filling openings, it is perfectly designed for feeding material to underlying equipment, mixers, or filling stations. Ndjdpfx Ahszz H Nfo Sec Technical data & dimensions: Manufacturer: GRT Projects Year of manufacture: 2025 (like new condition) Total area: approx. 9.2 m² Length: 4,600 mm Width: 2,000 mm Height (platform): 1,750 mm Weight: approx. 600 kg (very robust, heavy-duty design) Material: High-quality stainless steel (rust-resistant, easy to clean and disinfect) Equipment Safe footing and walking surface: Robust flooring made of stainless steel tear plate (non-slip) for maximum slip resistance. All-round raised edge/foot rail as fall protection for tools or small parts. Complete fall protection: All-round, stable stainless steel tube railing with handrail and knee rail. Comfortable access: Including a matching stainless steel staircase with non-slip perforated safety steps and railings on both sides. Process openings: Integrated filling openings in the floor for direct material feeding. Condition: The platform is in excellent, absolutely like-new condition (see pictures). "Everything from one source: We will be happy to offer you suitable financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total length: 21 mm, total width: 22 mm, space requirement height: 3,900 mm, The offer includes a warehouse platform of approximately 425 m2 from Topregal. Dimensions: approximately 21.3 / 19.7 m x 20.85 / 9.10 m Height to top of flooring: 3,880 mm Height to bottom of structure: 3,500 mm Load capacity: 350 kg / m2 Flooring: galvanized grating 30/19 H30/2 (499 m) Maximum usable load per support: 10,584 kg Maximum load per baseplate: 11.8 kg / cm2 Nedpfx Aez E S H Ueh Sjdc Number of cross braces: 4 Pallet transfer area Accessories: 2 staircases with a 38° incline; total width 1,000 mm, usable width 840 mm 99 meters of railing; 1,100 mm height, including handrail and knee rail, as well as rolled edge Color: Supports, railing supports, staircase stringers: RAL7024 Railing tubes, main beams, secondary beams: sendzimir galvanized Stair treads: grating

Condition: good (used), functionality: fully functional, Staircase cheek milling machine, Engelhart Riser and tread milling machine, TWF 1000 Year of manufacture: 1984 400 volts, 2.8 / 3.5 kW 2 speeds: 1390 / 2830 rpm Runs in both directions (left and right) Material clamping with foot pedal Clamping dimension, max. 130 x 10 cm New pressure reducer Undercarriage Chip collection – Extraction hose Includes 16 mm milling cutter Nsdpfjzv Ehcjx Ah Sedc Dimensions: 180 x 100 x 180 cm Weight: 400 kg