Used Steady Rest for sale (7,751)

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: limited functionality, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), empty load weight: 4,000 kg, volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Cjdpfeu Thh Eox Aflsaa Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating ins3.641tructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: as good as new (ex-display), Demonstration machine Robust band saw for logs up to 71 cm in diameter with extendable rail sections—extension is unlimited. Automatic feed with continuously variable speed. Electric height adjustment controlled from the operator panel. 3.8-inch touch LCD display for height adjustment. Saw unit suspended on both sides for increased stability and improved precision. CE certified. Cjdsvr I Rcspfx Aflsaa Technical data: Max. log diameter: 71 cm Max. board width: 67 cm Motor output S1: 5.5 kW Cutting length, base version: 2.1 m Cutting length, extension section (optional): 3 m, 1 m Weight: 550 kg Extras not included in the price (sample image).

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, functionality: fully functional, Baler Presto CC 20 M, year of manufacture 2019, pressing force 20 t, with retention device. Technical data: Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Codpfx Asxfh H Hsfljaa Filling volume: 0.53 m³ Tying: 3-fold, manual Throughput capacity at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find a video on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a service fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the information given or for any potential errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. The sale is ex location, without warranty or guarantee.

Condition: new, CleanMax-N Single Stage Ultrasonic Cleaners The CleanMax-N range of industrial sized single staged ultrasonic cleaners are designed to be used in industrial applications where heavy duty cleaning demands and performance are widely required. The CleanMax-N range are widely used for cleaning parts in the automotive, aviation, metal ware and many other industries where precise parts cleaning is essential prior to surface treatment or final assembly. The CleanMax-N range also offers a large amount of optional accessories ranging from pump filtration systems, oil separators, circulation pumps, weir systems and many more. - Tank capacities between 40 to 240 litres. - Constructed entirely of stainless steel (AISI 304). - Tank construction available in AISI 316L or AISI 316Ti. Casds Uldhspfx Aflea - Automatic shut of heaters at low water level. - Adjustment of the cleaning time & water temperature. - Models have a ultrasonic power adjustment feature: 50%, 75%, & 100%. - High efficiency piezoelectric ultrasonic transducers with special ceramics. - Drainage valve.

Condition: excellent (used), functionality: fully functional, Firewood processor Uniforest Titan 40/20 Premium In very good condition, only used for 1,5 years 2024-2025 Specifications - Splitting force: 20 tons - PTO drive 540: rpm - Required tractor power: 45 hp - Maximum wood diameter: 40 cm - Log length: 25 to 60 cm - Hydraulic lever control - Oil cooler - Widia carbide circular blade - Hydraulically adjustable 2/8 splitting wedge - Hydraulic 6-roller inlet conveyor (height 600 mm / length 2 m) - Telescopic and tiltable outlet conveyor, length 5 m Caedjxcgxpopfx Afloa - Speed adjustment of the outlet conveyor Log deck also available, please contact us in case you are interested

Condition: good (used), Year of construction: 2008, Manufacturer: Presto Type: SPN15 Build in: 2008 Backdoor: side hinged Cedpjtq Ehgofx Aflsaa Lifting system: hook The container and funnel were recently painted in RAL 7016

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Cajdpfsu Tha Isx Aflsa Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 4 pieces Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredders were an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machines are in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), machine/vehicle number: PA-399, Format: A3 Caodpfx Aoh Eh U Rsflja Paper format: ca 31x45cm

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, pressing force 50 t, with lifting and tipping device Technical data: Manufacturer: Presto Model: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: triple, wire, manual Throughput (bulk density): 35 kg/m³ – 1.3 t 60 kg/m³ – 1.7 t 100 kg/m³ – 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find a video on our website or on our YouTube channel. Inspections, including under power, are possible at any time by appointment. We also offer test runs with your material for a handling fee upon request. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00, and Friday from 08:00 to 13:00. Please note: Casdpfx Aexfh Htoflsa All technical data are based on information provided by the manufacturer. We do not accept liability for any information given or for possible errors. This offer is subject to confirmation, prior sale, and may be revoked at any time. Inspections are possible by appointment. The sale is ex works against prepayment, without warranty or guarantee.

Condition: new, AutoClean Ultrasonic Celaning System AutoClean ultrasonic cleaning systems, specifically designed for the high and precision cleaning demands of transportation industries such as the aviation, naval, railway and even the engine remanufacturing and repair industries. The AutoClean range has been designed with engine components in mind, cleaning all types of parts from cylinder heads, injectors, engine blocks, brake discs, gearboxes and radiators could all benefit. The AutoClean’s cleaning ability is 16 times more effective than conventional hand washing and with the use of ultrasonic cleaning power this enables you to reach the smallest holes and compartments effectively, meaning cleaning those hard to reach places has never been easier. Tank capacities between 200 to 9,000 litres. 28kHz standard ultrasonic frequency. 40kHz with sweep generator option available. - Constructed entirely of stainless steel (AISI 304). - Tank construction available in AISI 316L or AISI 316Ti. - Automatic shut of heaters at low water level. - Available with vacuum drying option. - Adjustment of the cleaning time & water temperature. Cajdpod Hdvdofx Aflea - Tailor made design with a large range of optional extras.

Condition: excellent (used), - Dimensions: 486x965x1219 mm - Capacity: 25L of oil - Year: 05/2015 - Model: PFG-800 Casdjwybzcopfx Aflsa - Temperature: 20-200°C - Computer with adjustable programs - Power: 0.6 kW - Voltage: 220V - Weight: 135 kg - Refurbished equipment: the equipment is prepared upon order, pick-up and return dates are agreed at that time (please request price after refurbishment)

Condition: reconditioned (used), Year of construction: 2013, Presto HAN10 Usable volume: 10cbm Filling opening: 1300x1500mm Machines are repaired, serviced, tested and sold painted in standard RAL. NEW: Polyamide, hydraulic hoses, oil & filters Casdpsd Hy Enjfx Aflja Images are reference images of machines we manufacture. We would be happy to make you an offer including delivery.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, empty load weight: 8,500 kg, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Cajdpfx Afsw U Dt Nelja Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, The TITAN 43/20 CD+E firewood processor with joystick control cuts logs with a maximum diameter of ø 43 cm using a harvester bar and splits them with a splitting force of 20 tons. This is a combination machine (electric and PTO connection). Demonstration and inspection by appointment possible – the machine is currently in stock and available immediately. Warehouse clearance – special price – interim sale reserved. Caedjtrmg Hopfx Aflja

Condition: used, Radius cutter, milling cutter -Finishing cutter -1x diameter: 84 mm height 44 mm R12 mm -1x diameter: 102 mm height 53 mm R15 mm -1x diameter: 114 mm height 70 mm R20 mm -Type: HSS -Number: 3 pieces -Sale: only complete Caodpfx Aeb A Rcdeflsa -Weight: 5.4 kg

Condition: new, ESP Top Loading Spray Washing Machines ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. - Top opening gas spring assisted machine lid - Motorised stainless steel component basket Codpsd Hbp Aefx Afleaa - Stainless steel spray bar assemblies above, below and at the side - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump - Electrical powered fluid heating On customers demand these machines will also be built with a drying air blower. Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car

Condition: used, Year of construction: 2006, WE ARE SELLING OR RENTING A PRESS STATION WITH A SCREW CONVEYOR SYSTEM AND SINGLE-UNIT CAPACITY, SUITABLE FOR PRESSING SECONDARY RAW MATERIALS! MANUFACTURER – PRESTO GmbH (Germany) Model: SPN15 Cjdpfxoxuqmhj Afloaa Year of manufacture – 2006 CAPACITY – 30 m³ Power – 11 kW This system is available for rent in Lithuania, Latvia, Estonia, and Poland! PRICE ON REQUEST!

Condition: reconditioned (used), Year of construction: 2019, Presto HAN10R Press container for skip loaders 10 m³ usable capacity Discharge door hinged at the top Two-piece lid above filling opening, opening left/right Prepared for ramp operation Machines are overhauled, serviced, inspected, and repainted in standard RAL color before sale. Pictures are reference images of machines of the same type we have manufactured. We will be happy to provide a quote including delivery. Casdpfx Afjw Uqngjlea

Condition: used, Year of construction: 2007, operating hours: 19,000 h, functionality: fully functional, overall weight: 30,000 kg, total width: 2,500 mm, total length: 9,000 mm, total height: 2,500 mm, working width: 900 mm, saw blade diameter: 32 mm, input voltage: 380 V, Used machine Still in daily use Optionally single saw Caodpfewyggkex Aflsa Partly removable from feed line Including saw bands And return feed system

Condition: new, saw blade diameter: 1,000 mm, drive type: Elektro und Zapfwelle, The 40/20 CD+E saw-splitting machine cuts the log with a diameter of max. 40 cm with a circular saw blade and splits it with a splitting force of 20 tons. It is a combination machine (electric and PTO connection) Demonstration and viewing possible by appointment - machine is currently in stock, available immediately Caedpfxevukuie Afloa

Condition: refurbished (used), Year of construction: 1999, travel distance X-axis: 11,450 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, Technical description Value Unit Travel distance X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of the Z-axis slider: 360 x 360 mm Portal aperture: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Cross section of the pusher: 360 x 360 mm Vertical head with spindle Power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Work feed infinitely variable in X, Y and Z: 10,000 mm/min Compressive force of each axis: 25,000 N Tool holder: SK 50 Cajdpfjtix S Nsx Afloa Horizontal angle head with 144 x 2.5° pitch, with SK50 spindle Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system 1 pallet shuttle with 2 storage stations 1 manual pallet transfer system between machine and shuttle 2 workpiece holder pallets: 5,000 x 2,500 mm Tool changer Chain magazine: 80 positions Distance between the positions on the chain: 130 mm Diameter of consecutive tools: 125 mm Tool diameter max.: 200 mm Maximum tool length: 400 mm Tool weight max.: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling devices: - Cooling via orientable nozzles - IKZ / cooling through the center of the spindle, 3,000 l tank, capacity: 30 l/min, pressure: 7 bar at the mold 2 chip conveyors: 1 Portal cladding Measuring probe, make: RENISHAW, type: MP14 Electronic handwheel Remote diagnosis Tool management and wear management Documentation in 2 copies: German / French CE marking Very well maintained, continuously serviced condition!

Condition: new, ESP Top Loading Spray Washing Machines ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. - Top opening gas spring assisted machine lid - Motorised stainless steel component basket - Stainless steel spray bar assemblies above, below and at the side - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump Caedpfjt Rrkjx Aflsa - Electrical powered fluid heating On customers demand these machines will also be built with a drying air blower. Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car

Condition: new, SprayClean Front Loading Spray Washing Machines SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. - Pneumatically powered vertical opening front access door Cedpfjd Hbp Ejx Aflsaa - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation

Condition: new, MSP – Manual Hand Spray Systems Cedpfx Ash E Szmsfloaa The MSP range of manual hand operated washing systems are made entirely from high quality stainless steel 304 and can be supplied high-pressure ump option achieving pressures of up to 60 bar. Thanks to a specially designed heavy-duty washing chamber the MSP range washes parts within a closed sealed envireonment ensuring the surrounding workplaces is kept clean, tidy and dry from pressurised water. The MSP range is enviromentally friendly by utilising alkaline aqueous biodegradable detergents and allows for effective energy consumption using a foot pedal operation that oprates the pump only when pressed. This makes the MSP a very capability unit and a must have for any workshop enviroments cleaning heavy soiled contaminants.

Condition: new, SprayClean Front Loading Spray Washing Machines Cedj T D R Dopfx Afleaa SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation