Used Steady Rest for sale (1,464)

Condition: used, Please contact ATS Norway for more information Iodpfx Adex Anccedetb Please provide reference number upon request: 21931 Specifications: Year model uncertain Weight: 1785 kg 400 volts Ready for delivery Description:Trenchin SN 50 C lathe with some equipment.The lathe has seen little use and has been well maintained.Ready for delivery. Own weight: 1785

Year of construction: 2013, operating hours: 702 h, condition: used, Power: 17 kW (23 HP) Make of engine: Briggs & Stratton, Vanguard General condition: good Technical condition: good Visual appearance: good Please contact Christian Theißen for more information Manufacturer: Rapid Model: 430 Year of build: 2013 Condition: Used Itodpfsxgti Ajx Addob Data: Total dimensions LxWxH: 2046 x 1190 x 1200 mm Drive type: Benzin, 17 kW / 23 PS Engine: Briggs & Stratton, Vanguard Hours: 702,5 Weight: 410 kg Special features: Briggs & Stratton 2-cylinder four-stroke gasoline engine with 23 HP, Transmission: continuously variable hydrostatic drive with single-disc dry clutch, Steering column: tool-free height adjustable, Steering: steering brake system, Tires: 23x8.50 - 12AS, Fuel: gasoline, Weight: approx. 215 kg, Auxiliary control unit for hydraulics, Year of manufacture: 2014 / Lipco mulching device (flail mower), Type: ME 104-LZ, Weight: 170 kg, Year of manufacture: 2014, Working width: 1 m. Price on demand Location: 41468 Neuss: immediately available

Condition: excellent (used), Dimensions and price depending on dimensions for one each Isdpsmn Ipujfx Addstb stair trestle : 95 mm high. 10 euro 140 mm high 12 Euro 185 mm high 15 Euro 230 mm high 20 Euro 275 mm high 22 Euro 320 mm high 25 Euro

Condition: excellent (used), For sale: professional forestry winch Schlager & Reichart Maschinenfabrik (Marktoberdorf, Germany). The machine is fully complete, features a robust design with PTO drive, and is ready for forestry operations. Model: Type 5119 2R – 836 Year of manufacture: 1991 Pulling force (inner cable): 5 tons Itedpoxcaaajfx Addjb Pulling force (outer cable): 3.5 tons Cable diameter: 12 mm Working pressure: 155 bar Drive: PTO shaft, 540 rpm Structural strength (Bruchlast): 12.6 tons Solid guard, protective mesh, adjustable supports Full set of mechanisms, control levers, hydraulic outlets Condition as shown in photos – the equipment was previously used by a German municipal service (Stadt Gotha Gartenamt), meaning it has been regularly maintained and is in good condition.

Condition: used, Year of construction: 2019, operating hours: 1 h, Stock clearance of a pallet fork with hydraulic log clamp. Suitable for Euro mount on the front loader or three-point hitch at the rear or front attachment area. The base plate is universally usable. Two bale spikes are also included in the package and are perfect for hay and straw harvesting. Ijdpfxex Ia S As Addotb

Condition: used, Year of construction: 2012, operating hours: 11,526 h, Welte W130: - Year of manufacture: 2012 - Operating hours: 11,526 - Previous owner: 1 - FIN: 212 130 15 - Well maintained, in good condition and ready for use The machine can be inspected and tested at any time. You can also reach us conveniently via WhatsApp on the telephone number: Itedpfx Adjx Hnqdjdjb Price: 119,950 euros net

Condition: used, Year of construction: 2010, operating hours: 21,586 h, John Deere 1210E: - Year of manufacture: 2010 - Operating hours: 21,586 - Crane 10 m - FIN: CGCBF02000737 - Well maintained, in good condition and ready for use The machine can be inspected and tested at any time. You can also reach us conveniently via WhatsApp on the telephone number: Iodpfxox Hnp Ho Addjtb Price: 79,900 ¤ net

Condition: used, Year of construction: 2011, operating hours: 10,832 h, John Deere 1210E: - Year of manufacture: 2011 Itedpex Hnqkefx Addsb - Operating hours: 10,832 - Crane: 10 m - VIN: CGCBF02002359 - Well-maintained, in good condition and ready for operation The machine can be inspected and tested at any time. You can also conveniently contact us via WhatsApp at the following number:

Condition: used, Year of construction: 2008, operating hours: 25,643 h, power: 120 kW (163.15 HP), ----Contact us easily and conveniently via WhatsApp! Save our number and text your questions or requests to our sales consultant. Our team looks forward to helping you!----BE AWESOME: REQUEST YOUR PERSONAL VEHICLE VIDEO NOW AND DISCOVER ALL THE DETAILS UP CLOSE - YOUR CONSULTANT WILL SHOW YOU EVERYTHING YOU WANT TO KNOW!---- John Deere 1110D: - Year of manufacture: 2008 - Operating hours: 25,643 - Serial No.: WJ1110D002680 Itodpfxsx Hnpye Addob - Crane CF572 10 m - Crane Serial No.: WJ0CF5X003854 - Well-maintained, in good condition, and ready for operation The machine can be inspected and tested at any time. ----Interested? Contact us directly or visit us in Burgthann. We look forward to seeing you!----Legal Notice: This vehicle description is for general identification purposes only and does not constitute a guaranteed property under the terms of sales law. Errors, changes, and prior sale excepted.

Condition: used, functionality: unexamined, Year of construction: 1999, operating hours: 26,000 h, 1999 Valmet Forwarder 860 2 x new komatsu computers fitted 2024 Cranab Crane Good working order Itjdpfjv Iynfsx Addsb

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 21,000 h, machine/vehicle number: WJ1270D000980, Equipment: additional headlights, air conditioning, lighting, No Eco 3 Itjdjwbc Ndepfx Addsb Engine type / H 480 10,000 MAS Tire tread 40%

Condition: used, functionality: fully functional, Year of construction: 2020, overall weight: 530 kg, machine/vehicle number: S80010003, Equipment: hydraulics, HUMUS PH1350 FORESTRY MULCHER Mounting: front, rear or excavator/arm Forestry rotor with hydraulic drive, suitable for front mounting on wheel loaders, crawler or mobile excavators Axial piston motor | 55 to 110 l IDEAL FOR EXCAVATOR MOUNTING 2 UNITS AVAILABLE - ACT FAST! Proven applications: • Mulching of wood and vegetation • Ditches and embankments • Area and landscape maintenance • Municipal use • Pasture maintenance • Recultivation Iedpfx Asxlg Aajddjtb • Infrastructure operations • Route maintenance • Biotope management • Verge maintenance • Restoration of natural habitats Housing with perforation pattern for fast assembly Overload protection via flexible V-belt drive Rotor tube diameter: 450 mm Cutting height adjustable up to 5 cm using skid shoes Replaceable skid shoes made of Hardox® wear plate Wide ejection width of mulched material Rotor with working depth limiter 2 replaceable counter blades in the housing Overload protection

Condition: as good as new (ex-display), Year of construction: 2017, Energreen forestry flail had 1.50m working width for Robomax Iodpeigzdpofx Addstb demo unit as good as new

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, BROWARY & DISTILLERIES Sp. z o.o. has been providing professional consulting, design, and implementation of beer and distillate production lines for many years. We produce private label products for our clients and automated drink dispensing systems. Our company’s strength lies in our highly qualified and experienced team of engineers, enabling us to offer comprehensive turnkey project execution. To date, we have designed and commissioned 28 craft breweries and 3 craft distilleries in Poland, produced over 200 private label craft alcohol brands for our clients, and installed 30 DRINK WALL automated drink dispensing systems in hotels and restaurants. We are pleased to offer you a used SALM brewpub brewery. Since 1924, SALM has been producing complete brewing systems. This brewery was manufactured in 2023 for a client in Bucharest and has only brewed 5 batches to date, which allows us to consider the offered installation as practically brand new! The brewery is in perfect technical and visual condition. Below is the full technical specification of the offered brewery: Annual production capacity: 1,100 hl of beer 1. Two-vessel brewhouse, 5.5 hl, stainless steel, A-frame design with Salm Brewmatic 02 computer control system – 1 unit. 2. Copper cladding on the mash tun and lauter tun’s cylindrical sections. Isdpfx Aox Aky Doddjtb 3. Stainless steel brewhouse platforms – 2 units. 4. External wort boiling kettle with atmospheric gas burner, powered by natural gas or propane – 1 unit. 5. Vapour condenser for brewhouse, mash, and lauter tuns, stainless steel, with built-in injection condenser and fan for odorless operation and DMS removal – 1 unit. 6. Two-roller malt mill – 1 unit. 7. Wort cooler – 1 unit. 8. Mains water chiller (for water above 10°C) – 1 unit. 9. Whirlpool – 1 unit. 10. Mobile beer pump – 1 unit. 11. Wort aeration system – 1 unit. 12. Oil-free air compressor – 1 unit. 13. Glycol cooling system – 1 unit. 14. Hot water tank, stainless steel, double-walled with PU insulation – 1 unit. 15. Brewhouse ladder – 1 unit. 16. UNI tanks, 11 hl, double-walled, 100 mm PU-insulated, built-in cooling jackets, stainless steel 1.4301, 1.0 bar, built-in CIP – 6 units. 17. TÜV certification for the above 6 UNI tanks, with a nameplate on each. 18. Serving tank for finished beer, 3.0 bar, capacity 10 hl, stainless steel 1.4301, PU foam insulated, water-jacketed, horizontal on a frame – 4 units. 19. Electronic temperature control for each UNI and serving tank – 10 units. 20. Control cable with protective hose and screw connection for each UNI and serving tank – 10 units. 21. Full set of piping and fittings for installation on a single surface – 1 set. 22. Set including 1 beer hose (22 m) with fittings and a mini-laboratory. The brewery has a type approval from the Central Office of Measures in Warsaw. On request, we can arrange transportation of the brewery from Bucharest to any country of your choice and handle installation. We will gladly send you more photos, a presentation video of the brewery, and a profitability calculation for running your own brewpub via email.

Condition: new, Brugger FMP 225 Forestry Mulcher – New, 225 cm working width, ideal for heavy-duty mulching tasks! Ijdpfx Ajwhyw Ejddotb The Brugger FMP 225 is a robust forestry mulcher designed for agricultural, forestry, and fallow land applications. Featuring a double belt drive, 36 tungsten-carbide-tipped hammers, and hydraulic equipment, it is ideally suited for tractors from 110 hp – reliable, powerful, and built for tough jobs. Technical Data – Brugger FMP225: Working width: 225 cm Drive: Double belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Required power: 110 – 160 hp Weight: approx. 1,800 kg Mounting: Three-point linkage CAT II / III Italian CMR gearbox Rotor shaft Ø: 219 mm (465 mm with hammers) Hammers: 36 pieces, tungsten-carbide-tipped Working depth: –70 mm / –30 mm / +10 mm (3-stage adjustable) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic connections: 2x double-acting (1x for tailgate, 1x for pressure roller) Equipment: Hydraulic rear flap & pressure roller Included: PTO shaft Prices + VAT: Brugger FMP180 180cm – 30 hammers, 1,600kg = €10,900 Brugger FMP200 200cm – 32 hammers, 1,700kg = €11,900 Brugger FMP225 225cm – 36 hammers, 1,800kg = €12,900 ----- Contact us for a tailored quote!

Condition: ready for operation (used), Complete kitchen/restaurant/gastronomy/catering/canteen equipment The set includes: 2 Viessmann chambers with dimensions 3600 x 2700 x 2450 mm 4200 x 1800 x 2450 mm (divided into 2 chambers, one of which can work as a freezer and the other as a cold store) Work tables with dimensions: 300 x 70 x 90 cm 200 x 90 x 85 cm 200 x 90 x 90 cm 120 x 70 x 85 cm 300 x 80 x 85 cm 120 x 75 x 90 cm 300 x 80 x 80 cm Sinks with dimensions: 120 x 70 x 90 cm with two sinks 50 x 50 cm 120 x 60 x 85 cm with one sink 40 x 40 cm 190 x 80 x 90 cm with one sink 50 x 40 cm 110 x 58 x 85 cm with one sink with a diameter of 25 cm Lockable cabinet with shelves dimensions: 60 x 55 x 240 cm Dishwasher dimensions 70 x 70 x 200 cm Stoves/ovens with dimensions ELOMA ELH6-1 90 x 80 x 75 cm PAULUX GXA 6-11 90 x 80 x 85 cm ENDERS 42 x 48 x 30 cm 2 pieces Iedpfeq A Supsx Addotb Induction cookers EKU C-I-750-EST-4-3.5 with dimensions 80 x 75 x 80 cm PAULUX dimensions 40 x 50 x 35 cm Fryers with dimensions 80 x 80 x 80 PAULUX 80 x 80 x 80 cm 2 pieces PAULUX 60 x 80 x 35 cm Shelves with dimensions 190 x 50 x 40 cm 3 pieces 140 x 40 x 80 cm Toaster oven dimensions: 40 x 65 x 30 cm 2 pieces Water conditioner Thermos A set of shelves with shelves Hoods with dimensions 320 x 90 x 55 cm 100 x 45 x 60 cm 80 x 55 x 90 cm 160 x 45 x 100 cm 96 x 45 x 100 cm 90 x 80 x 150 cm 60 x 43 x 70 cm And other smaller devices visible in the photos

Condition: used, Year of construction: 1973, turning diameter over bed 2235 mm turning diameter over slide rest 2997 mm turning length 12200 mm Control SIEMENS faceplate diameter 2000 mm required space ca. 7 x 22 m weight of the machine ca. 220 t HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation is included Technical Specifications Space requirement: 7 x 22 metres + control cabinet 4.7 x 0.5 x 2 metres Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. Machine Data 1.1 Total Machine Max. Swing over bed slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm max. weight of workpiece 100,000 kp height measured from shop floor level up to machine axis 2,200 mm 1.2 Headstock Diameter of main spindle 670 mm Diameter of faceplate 2,000 mm Max. chucking diameter 1,600 mm Min. chucking diameter 455 mm Dead Center Angle 80 ° Iedpfxet Ei Hue Addotb Faceplate Speed: Constant torque 1st range 0,5 – 2,6 2nd range 1,25 – 7,2 3rd range 3,1 - 18 4th range 7,8 - 45 Constant capacity 1st range 9,0 2nd range 22,6 3rd range 56 4th range 140 Capacity of Main Drive 220 HP Max. Torque faceplate 30,000 kpm Key Speed 5,7 rev/min 1.3 Saddle Max. admissible main cutting force 30,000 kp Feed Speed longitudinal 0,3 – 120 mm / min Feed Speed transverse 0,3 – 120 mm / min Rapid Traverse Speed longitudinal 2,000 mm/ min Rapid Traverse Speed transverse 1,000 mm/ min Max. copying depth 500 mm Max. length of tool carrier measured from front edge cross slide to front edge tool carrier 700mm Tool carrier – width 60mm 35 mm Cutting Edge height of tool units 60 mm Cutting edge height of shank-type tools beeing located on the clamping table 100 mm Travel of upper tool post 820 mm 1.4 Tailstock Tailstock barrel diameter 580 mm Adjustment of the barrel 150 mm Dead Center angle 80 ° Speed of rapid traverse 2,000 mm / min Positioning speed 500 mm / min 1.5 Steady Clamping range 350 – 900 mm ...

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD3100L FANUC 0IT PLUS CNC LATHE MACHINE CONSTRUCTION & FEATURES 12” STANDARD CHUCK SIZE. 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. HARDENED & GROUND BOX GUIDEWAYS FOR HEAVY DUTY CUTTING. 10 STATION HIGH SPEED RIGID SERVO TURRET. 2,800 RPM 26.0 /18.5 KW HIGH POWER MAIN SPINDLE. 24 X 30 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. MACHINE CAPACITIES Swing Over the Bed Ø 750 MM Swing Over the Carriage Ø 500 MM Maximum Turning Diameter Ø 500 MM Maximum Turning Length 1,300 MM Bar Capacity Ø 102 MM MAIN SPINDLE Chuck Size Ø 12” – 305 MM Spindle Bore Ø 115 MM Spindle Speed (rpm) 2,800 RPM Motor (Max/Cont.) 26.0 / 18.5 KW Torque (Max/Cont.) 1,123 / 657 NM Spindle Nose A2-11 FEED Travel X 265 MM Travel Z 1,350 MM Rapid Speed X 24 M/MIN Rapid Speed Z 30 M/MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools 10 Tool Size - OD 25 MM² Tool Size - ID Ø 50 MM Indexing Time 0.15 SEC / STEP TAILSTOCK Type QUILL TYPE TAILSTOCK [PROGRAMMABLE TAILSTOCK] Taper MT5 [MT4] Quill Diameter Ø 100 MM Quill Travel 120 MM TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 27 KVA Thickness of Power Cable Over 16 MM² Voltage 415V / 50Hz / 3Ph MACHINE Floor Space (L x W)4,405 x 1,978 MM Height 1,850 MM Ijdpfx Adsx Tiggsdstb Weight 7,200 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT GUN HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO STEADY REST PREPARATION - PROGRAMMABLE CLAMPING & TRAVEL PROGRAMMABLE TAILSTOCK IN LIEU OF STD QUILL TYPE TAILSTOCK - MANUAL TYPE MT#5 100 MM DIA QUILL, 120 MM QUILL TRAV STANDARD FACTORY FITTED OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 12 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) TOOLBOX STANDARD TOOLING PACKAGE - SEE MANUFACTURER'S BROCHURE STANDARD LIVE CENTER

Condition: used, Excel XL 420 Lathe x 2m Between Centres, 2 Axis Digital Readout, Fitted With 3 Jaw Chuck, complete with quick change tools (3), 4 jaw chuck and steady rest. Itjdpfeyabcfox Addsb

Condition: excellent (used), Year of construction: 2018, operating hours: 26,811 h, functionality: fully functional, machine/vehicle number: -, turning length: 1,350 mm, turning diameter over cross slide: 715 mm, turning diameter: 550 mm, spindle motor power: 48 W, spindle speed (max.): 3,000 rpm, spindle bore: 106 mm, travel distance X-axis: 380 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,350 mm, mount diameter: 12 mm, total height: 2,346 mm, total length: 4,088 mm, total width: 2,129 mm, swing diameter over bed slide: 950 mm, overall weight: 10,400 kg, High specification machine with Fanuc 32iTB control. Many options including SMW Autoblok steady rest on programable Servo base, coolant through steady, high pressure coolant, enlarged left hand door to allow 920 mm swing workpiece (950 mm max). Various other options. New cost in 2018 over £200k. Ijdevz Ab Ujpfx Addjtb

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 22,500 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: DC 025, laser power: 2,500 W, pipe diameter (max.): 140 mm, pipe length (max.): 8,500 mm, table length: 8,500 mm, working length: 8,500 mm, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, workpiece weight (max.): 4,000 kg, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 10,000 kg, total length: 17,536 mm, total width: 4,604 mm, total height: 2,237 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, 2006 BLM Adige LT712D Tube Laser Machine Manufacturer: BLM Adige Machine Model: LT712D Laser: Rofin Sinar series DC K 2.5kW Laser source. Year: 2006 Infeed: 8,500mm Outfeed: 6,500mm Condition: Very Good Hours: 22,500hrs Available February or March 2026 This 2006 BLM Adige LT712D is a high-performance CNC tube laser cutting system designed for precision processing of mild steel, stainless steel, and aluminium tube profiles. Known for its reliability and accuracy, the LT712D is one of the most capable mid-range tube laser platforms, delivering clean, repeatable cuts with full automation from loading to unloading. With only 22,500 operating hours, this machine is in very good condition and has been maintained to OEM standards. It offers exceptional value for fabrication companies, structural steel specialists, subcontractors and manufacturers looking for a high-precision tube laser with proven durability. ⭐ Key Machine Specifications Working Capacity & Tube Dimensions Minimum tube length: 3,200 mm Maximum tube length: 8,500 mm Round tube diameter: Ø12 – Ø140 mm Square tube: 12 – 120 mm side dimension Rectangular / flat-oval: up to 170 mm circumscribed circle, min. side 10 mm, max. side 140–150 mm Max bar weight: Linear: 15 kg/m Total (L=8500 loader): 130 kg Machine Dimensions & Weight System footprint (L=8500 version): 17,536 × 4,604 × 2,237 mm (complete system) 13,595 × 4,604 × 2,237 mm (machine body) Machine weight: approx.10000 daN (= 10 tonnes) Laser, CNC & Automation CNC Control: Siemens Sinumerik 840D Laser Source: Rofin DC-K Series Cutting Head: Autofocus head with capacitance sensor + collision protection Working Axes: X travel: 8,500 mm Y travel: 400 mm Iodpfx Adsx Ddagjdotb Z travel: 95 mm A-axis: spindle rotation A1-axis: steady rest rotation V-axis: Bar support on the machining line (90mm) W-axis: Unload piece support (85mm) X1-axis: steady rest travel (610 mm) Loader & Unloader Automatic bundle loader with alignment, measuring & singularisation system Scimitar-style tube transfer system for smooth transition to machining line CNC-controlled tube support system with 5 active support groups Intelligent cut-piece unloader with conveyor belt for short parts up to 300 mm Extraction & Cooling Systems Fume extraction: 2,000 m³/hr with high-efficiency filtration system Cooling: MTA TAE 121 chiller, 260-litre cooling circuit reserve Hydraulics: 25-litre tank, 25 L/min pump, 70 bar system pressure 🟢 Condition & Availability Year: 2006 Hours: 22,500 (very low for a tube laser) Condition: Very Good – well maintained, clean, fully operational Availability: February–March 2026 Includes: Full machine, loader, unloader, chiller, documentation supplied. Why the LT712D Is a Top Choice The BLM Adige LT series is widely regarded as the benchmark for tube laser systems. This LT712D stands out thanks to: ✔ Exceptional tube cutting accuracy ✔ Reliable automatic loading & unloading ✔ High-quality Rofin laser source ✔ Full CNC control of every movement ✔ Capability to handle a wide range of profiles ✔ Heavy-duty industrial build quality (10 tonnes of rigidity) For fabricators looking to increase productivity, quality, and automation, the LT712D is an ideal investment. Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Bezel, steady rest, lynette -Bezel: max. opening Ø 120 mm -Centre height: 180 mm -technical drawing: in the photos Itodjwtl Tcepfx Addsb -Dimensions total: 390/120/H420 mm -Weight: 12.7 kg

Condition: used, Year of construction: 1985, greates pass round over bed 810 mm swing diameter over face slide 560 mm centre distance 00 mm bed width 480 mm slide valve travel 400 mm upper head travel 180 mm turning tool - shaft cross cut 32 x 25 mm power capacity 22 kW max. torque on the spindle 30 Nm spindle head Gr. 11, DIN 55027 spindle diameter in front bearing 152,4 mm spindle bore 106 mm turning speed range 9 - 1800 U/min turning speeds 24 longitudinal feeds: 0,092 - mm/U face feeds 0,046 - mm/U metric threading 0,5-112 mm inch threading 1/4 - 56 G/1" thread - module mm thread - DP 1 - 224 Pitch tailstock quill diameter 115 mm quill stroke 225 mm taper of tail spindle MK 6 max. workpiece weight between centres 00 kg max. workpiece weight -without tailstock 750 kg 3-jaw chuck Röhm, Ø Overall size ca. 4600x1900x1600 mm weight ca. 4300 kg Number of feed stages and threads: 99 Accessories: Itsdpjxn Ty Refx Addeb 3-axis digital display Mobile chip guard over the entire length (plexiglass) Coolant device Rapid traverse in Z and X axes Multifix steel holder size C with 6 interchangeable cassettes Bed stop with micrometer scale Fixed steady rest - 300 mm Taper sleeve for main spindle MK 6 Travelling center point (center point) MK 6 Bed guides in very good condition!

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Iodeuddimspfx Addetb Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: used, Year of construction: 1988, turning diameter over bed 2000 mm turning diameter over slide rest / mm turning length / mm - Type 1 K 671 320 F3 Itedpfx Adoxn Tz Isdob - Year of manufacture 1988 (first commissioned in 1998) - Turning length 10,000 mm - Turning diameter over bed 2,000 mm (modified) - Faceplate diameter 1,950 mm - Faceplate clamping range 400 - 1,350 mm - Speeds 1.00 - 140 rpm - Torque 125,000 Nm - Main cutting force 130 kN max. - Automatic swiveling tailstock - Max. workpiece weight 70 tonnes - Max. workpiece weight with steady rest 100 tonnes - Drive power 100 kW - Number of bed ways 4 - Dimensions 22,000 x 6,200 x 2,900 mm - CNC control SIEMENS 840D (2010 for €220,000.00) - Support feed X-Z 0.3 - 4,000 mm/min. - Support rapid traverse X-Z 4,000 mm/min. - Inner cone dimensions 140 x 1:7 - The machine complies with CE guidelines - Includes 2 steady rests, 1 roller block, 4 jaws, boring device - Condition: very good condition