Used Steam Table Textile for sale (17,992)

Condition: used, cooking length 4.000 mm Gjdoyhb D Sopfx Aadstu belt width 800 mm all stainless steel suitable for steam heating temperature measurement 4 zones steam injection per zone (4 zones) air circulation per zone from bottom to top through the belt dimensions (l x w x h) : ± 6.200 x 1.700 x 2.200 mm adjustable speed

Condition: used, functionality: limited functionality, In this offer you purchase a used digital on demand textile printing system "Kornit Storm HD6" Object of sale: 1 x Kornit Storm HD6 The system boots up Print heads need to be replaced Condition: This offer is for a used device, which may show signs of use Gedewlnidopfx Aadotu (minor scratches or yellowing). Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2009 Pressing force: 532 kN Voltage: 400 Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 cm × 65 cm Condition: Very good! Fully inspected and tested. FLITS Rental & Sales service: With every machine, we supply a bundle of binding wire (120 wires). Need additional binding wire bundles? Request a non-binding quote. Choosing FLITS Rental & Sales means speed, transparency, and reliability. We think along with you, respond immediately, and ensure you swiftly receive the right machine for your needs. You are very welcome to view the machines on site. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits available by appointment, so we can provide all the information you need and show you the most suitable machines. We are happy to assist you! Godpfx Aajyka Hqodstu Waste baler, paper baler, cardboard baler, plastic baler, waste compactor, recycling, textile baler, waste processing.

Condition: good (used), Year of construction: 2006, functionality: fully functional, spindle diameter 125 mm x-travel 3000 mm y-travel 2000 mm z-travel 1500 mm W-axis (spindle longitudinal) 600 mm table-size 1250 x 1600 mm table load capacity - central/maximum 5000 kg Control Heidenhain iTNC 530 tool taper ISO 60 spindle turning speed range 5 - 3000 U/min spindle drive motor 37 kW max. torque on the spindle 1646 Nm Godpfx Aoyifnujadjtu transmission ratio 2 Working hours: - Machine on: 59.078 h - Autom. cycle: 24.207 h * CNC-control HEIDENHAIN iTNC 530 * Coolant equipment * Table B-axis, 360.000 positions

Condition: used, Year of construction: 2020, operating hours: 6,162 h, machine/vehicle number: 958-167, Application version: 6.9.3.9, PLC version 20200618.957, with control PC, flat panel display, handheld scanner, keyboard and mouse (without add-on monitor) Gsdpfx Aasyidl Eedstu

Condition: used, Year of construction: 2020, machine/vehicle number: 958-168, Operating hours: approx. 6,000, currently not in operation, print heads have been preserved, application version: 6.9.3.9, PLC version: 20200618.957, includes control PC, flat screen monitor, hand scanner, keyboard, and mouse. Gjdpfjyidl Ssx Aadjtu

Condition: used, Year of construction: 2021, operating hours: 4,691 h, machine/vehicle number: 964-005, Application version: 7.80.4.1, PLC version 20230531.96, with SUPERMICRO control PC, flat screen, handheld scanner, keyboard and mouse (without tablet PC and monitor assembly) Gtedpfx Aajyidlxedou

Condition: excellent (used), Year of construction: 2001, overall weight: 10,000 kg, total length: 5,000 mm, total width: 900 mm, total height: 900 mm, Cast iron box table Weight 10 Ton 2 matching pieces availebel Nice surface Number of T slots: 7 Jump from T to T: 130mm T size: 22mm Number of T-slotted sides:1 Length: 5000mm Width: 900mm Height: 900mm Weight: 10000kg Gedpfxjyg Hpws Aadjtu Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), controller manufacturer: Siemens, empty load weight: 55,000 kg, 2-koloms portaalfreesmachine tussen de kolommen: 2550 mm!! 5-assige freeskop koeling door spindel totaal vermogen: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2500 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Power needed (KVA): 90 Gsdpfev Sfkaox Aadstu ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Condition: used, Union KCU-130 Table Type Horizontal Boring Machine Year 2001 Condition Used Serial Number 1370022 (2001) X/Y/Z 4000/3000/1500mm Table Size 2000 x 2500 x 20,000kgs Spindle Taper BT50 Heidenhain TNC430 Control, B-axis 360 Deg, Gjdpfxjyb Ag Is Aadetu 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Right Angled Milling Att. Guarding Enclosure

Condition: ready for operation (used), table length 800 mm table width 320 mm groove width 20 mm dimensions of the machine ca. 800 x 320 x 250 mm Gjdpfxoumndbj Aadetu Fixed angle table for attachment to tool milling machine with water drainage. Machine dealer with own stock of 1600 m².

Condition: new, table diameter 800 mm table load 2 t swivelling range --> 95 Grad max. torque 1250 Nm table rotation speed 2 U/min Working height from to 550 - 1300 vertikal mm Working height from to 650 - 1400 horiz. mm total power requirement 2,53 kW weight of the machine ca. 930 kg dimensions of the machine ca. 1,85 x 1,66 m Video available on our website. Gedpsk Rfwtofx Aadstu Electric 400 Volt Hand control panel Hydraulic-device Hydraulic positioner for permanent turning right + left, tilting, Raise and lower. Various sizes from 1250 - 18000 kg load capacity in the production program. Machine dealer with own stock of 1600 m².

Condition: new, weight max. in kg 2500 kg Working height minimal 350 mm Working height maximum 1850 mm max. torque 3000 Nm 0 1 U/min adjustment speed vertikal 560 mm/min vertical adjustment 1500 mm baseplate diameter 600 mm rotation movement 0,75 kW stroke drive 1,85 kW height of the plant 2505 mm weight 1160 kg Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory. Syncrolift features two main axis: Electrical elevation/descent, and Electrical 360° left/right rotation. Due to its special design, the column positioner can process very large components. Higher columns (+500/+1000/+1500 mm) for processing components with larger dimensions are available. Special equipment: Double-sided lifting drive, guide rails in 2 m segments, wireless handheld control unit, TCS program control, etc. Thanks to the movable columns, the length of the different workpieces can vary between 1 m and over 20 m. Depending on the weight and dimensions of the component, positioners with load capacities of max. 2,500 kg to max. 40,000 kg are available. Advantages: Improved Safety Proper Ergonomics Improved weld quality Cost savings and profit increase Gsdpfx Aajvw Du Uedjtu Welding/Assembly procedures repeatability Machine Features: Master and idler column with rotating mounting plates Pallet jacks for column lifting and relocating Servo-motor, ball screw and encoder control for Up & Down motion Servo-motor, gear reducer and encoder control for Rotation LCD display for positioning set up, safety thresholds setting and diagnostic Automatic load leveling Redundant safeties - servo motor brake, ball screw thread geometry and mechanical Stopper Low maintenance 240/480/600 Volt - 3 phase - 60 Hz In order to configure the system precisely to meet the requirements, we must obtain all relevant information about the workpieces to be processed for the manufacturer's technical office. There we have a list of questions for this purpose.

Condition: used, Year of construction: 2008, functionality: fully functional, LOOS International steam boiler / steam generator DF 1500 (06/2008), complete with Weishaupt oil/diesel burner. Capacity 1500 kg/h, PS 31 barg, PT 56 barg, TS 238°C, total volume 250 L, CE 0036. Supplied skid-mounted with control cabinet and instruments (as pictured). In stock, ready for loading. Sold to the first buyer who confirms with advance payment. Gedpfjyg Rw Eex Aadjtu

Condition: used, Giusti cooking vessel steam jacketed cooking vessel, 225L, central bottom discharge, stainless lid, Gtjdpfxedrmnbs Aadeu

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: MB200MEH3SP-E, functionality: fully functional, cutting length (max.): 3,962 mm, cutting height (max.): 203 mm, cutting width (max.): 1,420 mm, Lightly used Woodmizer Slabmizer MB200. This machine is ideal for surfacing large planks and live edge slabs. The Slabmizer MB200 is renowned for its precision and reliability. Includes extraction unit. Specifications: Brand: Woodmizer Model: Slabmizer MB200 Year of manufacture: October 2021 Power supply: 380 volt / 16 amp Motor: 2.9 kW Extraction unit: Power supply: 380 volt / 16 amp Capacity: 2,950 liters per minute Asking price for Slabmizer including extraction: €11,950 excl. VAT Gjdoyh Ng Sepfx Aadetu Additional information: Maximum material width: 1,420 mm Maximum material height: 203 mm Maximum material length: 3,962 mm (or longer with optional 1.5 m extensions) Minimum material length: 558 mm (22") Maximum cutting depth: 3.2 mm (1/8") Minimum cutting depth: 0.4 mm (1/64") Cutterhead: 127 mm (5") with five four-sided carbide knives Cutterhead speed: 5,500 RPM Powered cutterhead: Directional control and variable feed rate Sanding head: Optional 7" orbital sanding head Dust extraction port: 90 mm (3.5") diameter Country of manufacture: Poland

Condition: good (used), Year of construction: 2020, functionality: fully functional, 5.5 kW, Tiltable -45/+45°, electronic height and tilt adjustment Gtjdpfx Aasykar Hodju Left/right, 6 speeds Aigner fence 2 x 500 mm, digital display on spindle moulder fence, table 2500 mm x 780 mm, mechanically programmable spindle fence with two displays, system for quick removal from the worktable New price €18,700 Available approx. September 2026 Transport possible at an additional cost!

Condition: like new (used), functionality: fully functional, Year of construction: 2024, Stainless steel table cart Glazing table with 10 tray shelves 780 x 580 or 600 x 400 trays Gtedpfx Aaowpzrmsdou Mobile with 2 brake castors Used device, cleaned We have many more stainless steel furniture in stock!

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2026, total height: 970 mm, total width: 3,400 mm, Work tables AT 3400, mobile Stainless steel worktop with rear gallery Drawer unit on the right 2 stainless steel flour trolleys 8 ingredient containers on the left with stainless steel lid Used device, cleaned Dimensions: 3400 x 800 x 970 mm (W x D x H) Gtsdpfewyrw Iex Aadou Option: Delivery service Many more tables in stock!

Condition: good (used), Year of construction: 1992, Machine-Details: Stock-No. 1022-2360 Type of machine Rotary Table Surface Grinding M/C-Horiz. Make ABA Type FRU 800 NC Year of manufacture 1992 Type of control NC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Gtodpoyhbmysfx Aadsu Grinding wheel width 80 mm

Condition: excellent (used), Angle Table rotatable, tiltable and inclinable Manufacturer: MAHO Table surface: 630 x 380 mm T-slot width: 14 mm Clamping surface: 350 x 245 mm Bolt circle for mounting screws: 135 mm Gtedsygrz Eepfx Aadou Width: 630 mm Depth: 500 mm Height: 350 mm Weight: 110 kg

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total length: 800 mm, total width: 1,400 mm, total height: 850 mm, TOP Work Table AT 1400 with Stainless Steel Top Work Table / Baker's Table Stainless steel work surface with rear upstand Bottom shelf Stainless steel construction with 2 doors Dimensions approx.: 1400 x 800 x 850 mm (W x D x H) Used unit, cleaned Gtsdeykig Tjpfx Aadou Option: Delivery service

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total length: 800 mm, total width: 4,000 mm, total height: 900 mm, TOP workbench AT 4000 with beech worktop, mobile Stainless steel workbench AT 4000 with beech wood worktop bottom with storage grate drawer unit on the left Dimensions: 4000 x 800 x 900 mm (W x D x H) Gtsdpfjykifpsx Aadou Used unit, cleaned Top sanded and newly oiled We have more top-quality workbenches in stock!

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, type of input current: AC, input voltage: 230 V, ambient temperature (min.): 15 °C, electrical fuse: 10 A, input frequency: 50 Hz, ambient temperature (max.): 38 °C, total length: 680 mm, total width: 1,300 mm, type of cooling: air, Coldline Master GN 2 Refrigerated Table For quick and flexible use Model: TS13/1M-760 Stainless steel construction Cooling range: -2 to +8°C, adjustable Circulated air cooling Ready-to-plug-in unit, 2-door Connection: 230V Dimensions: 1300 x 680 x 860 mm (W x D x H) Used equipment Options: Grids / trays Pair of support rails Gtsdpeykibdsfx Aadeu Maintenance contract Service package Delivery service Instruction & commissioning Many more refrigeration units available from us!

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Bakery and confectionery work table. Stainless steel with granite worktop. Reinforced welded construction. Storage shelf on the left, open on the bottom right. Stainless steel design. Approx. dimensions: 3000 x 800 x 890 mm (W x D x H). Used device, cleaned. We have many more top-quality tables in stock! Gedpfxowv E Nis Aadetu