Used Stirrup Bending Machine for sale (64,925)

Condition: used, Bending capacity: Ø45 mm Bending angle: 0 - 180° Revolver-adjustment: 8-fold adjustable angles Mandrellength: 4000 mm Sets of bendingdies: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm Rcodpfoq Nipyex Alcef 1x Ø 28 mm 2x Ø 30 mm Featured with: - 4 Mandrels - Mandrel retraction unit Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Rjdpfxszbcwms Alcecf Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Year of construction: 1981, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012. Redjnvfdbopfx Alcecf

Condition: good (used), Technical specifications: Working width: 4050 mm Rcjdpfx Alowkaalocsf Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Rcedpfx Alerc Hiiocef

Condition: new, Year of construction: 2026, 2-roll driven profile bending machine Hydraulically adjustable top roller Shaft diameter: 40 mm Roller diameter: 152-162 mm Revolutions: 8.5 per min. Redpfshgiuhsx Alcscf Top roll adjustment: 120 mm Capacity table: in the attachment Machine available in various versions: Manual adjustment, 3-roll driven etc.

Condition: ready for operation (used), A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible. Rcjdpfx Aexl Up Ujlcjf

Condition: new, Year of construction: 2025, machine/vehicle number: B2202I0007, TruBend 3130 (3.2 m) (B38) – economical, precise, and future-proof all-around bending machine with 1300 kN pressing force, 3230 mm bending length, 615 mm installation height, and 445 mm stroke. Equipped with a C-frame, press beam with spherical bearing and press beam inclination, On-Demand Drive with 4-cylinder technology, length measuring system (Y-axis) with dynamic springback compensation, back gauge finger 1000 mm (2 pieces), hydraulic TRUMPF lower tool clamping system, control unit with foot pedal, hydraulic oil filling, tank heating, and E-Learning package Technology TruBend. With CNC-controlled wedge compensation and Touchpoint TruBend machine control including user management system, TRUMPF bending technology data, and control panel support arm on the left, which can be swiveled and tilted. Data transfer via USB, RJ-45, network capability, and remote support interface. Safety features include CE marking/EC Machinery Directive, sliding door at the rear, and side swing doors on the right/left. Extended standard equipment: BendGuard with block laser, 4-axis back gauge (X, R, Z1, and Z2 axes), manual TRUMPF upper tool clamping system, workshop programming TecZone Bend (trial), installation, commissioning, and training, support console 70, control cabinet air conditioning up to 35 °C, Smart View MT ready, and data usage agreement. Rcjdpfjzwnaqex Alcjf

Condition: good (used), Year of construction: 1987, Press brake, bending machine, swing bending machine, die bending machine -Manufacturer: LOTZE Swivel bending machine with segmented upper jaw type 1512000 3.5 -Drive: mechanical, cam control semi-automatic -Max. working width: 2000 mm -Max. sheet thickness: 3.5 mm -Max. intermediate dimension: 180/280 mm -Accessories: 12 segmented upper cheek splints, 3 upper cheek splints Redpfx Aszwpm Selcocf -Connected power: kW -Dimensions: 3350/1250/H1600 mm -Weight: 2555 kg

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Rjdpjwbvmiofx Alcscf Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1250 mm plate thickness 1.5 mm roll length 1270 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 400 kg range L-W-H 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever Rcodpfxexaafde Alcef - electrical safety device

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm roll length 1070 mm Rsdpfexacbuox Alcscf roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Year of construction: 1985, condition: good (used), machine/vehicle number: xxxx, Technical specifications: - Bending and rolling processes performed manually, - Max. working width: 1020 mm - Max. material thickness (St 40): 1.25 mm - Bending angle adjustment via end stop: 10 - 180° Rodof S Tg Tspfx Alcjcf - Max. stroke of the upper die: approx. 85 mm - Max. adjustability of the bending die: 20 mm - Shaft diameter: 55 mm - Upper shaft can be pivoted outwards - Rear shaft can be adjusted parallel and at an angle - Space requirement: approx. W 1500 x H 1400 x D 750 mm - Weight: approx. 400 kg

Condition: good (used), Year of construction: 2000, machine/vehicle number: 21977-1964, Offer 26165 Rjdpfx Alszf Hkdocecf Technical Data - Two driven rollers, each hydraulically adjustable - For edging and conical rolling - Operation via a separate control panel, with digital actual value display - and manual operation - Max. working width 1300 mm - Max. sheet thickness at 400 N/mm² without edging - at bending diameter 370 mm, inside 30 mm - with edging at bending diameter 370 mm, inside 25 mm - without edging at bending diameter 380 mm, inside and - width of 370 mm 45 mm - Upper roller diameter each 300 mm - Side roller diameter each 310 mm - Working speed 4.5 m/min - Drive 400 V / 30 kW - Space requirement W 5800 x H 1900 x D 2200 mm - Weight 8500 kg

Condition: new, Shaft diameter 40 mm 138 mm Upper shaft diameters 138 mm engine output 1,1 / 380 kW / V work speed 6 m/min weight of the machine ca. 230 kg required space 750 x 600 x 1400 mm The Gerd Wolff PK 40 is a pipe bending machine which is produced for our GERDWOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Standard Accessories and technical details - Sheet metal frame - 2 bottom rolls are driven - Direct drive power - Upper roller is idle (free rotation) - Hardened rollers - Hardened shafts made of special steel material - Standard rollers - Adjustable guide rollers - Horizontal and vertical working position Optional equipment - Tube bending rollers Rcedpfxjyn R Ugo Alcef - Profile bending rollers - Angle bending rollers - Digital readout - Optional lateral angle guides

Condition: new, Year of construction: 2026, roller diameter: 140 mm, roller length: 1,570 mm, Equipment: cone bending device, hardened rollers, swiveling upper roller, - Capacity: 1570 x 4.5 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital display for rear roller movement - Digital display for bottom roller movement (material clamping) - Hardened rollers - Tapered rollers - Brake motor - Emergency stop Rsdsgg Nv Ispfx Alcecf - Documentation - 400V

Condition: good (used), Year of construction: 2006, control type: CNC control, actuation type: hydraulic, controller manufacturer: PC 300 TOUCH, number of rollers: 3, shaft diameter: 105 mm, overall weight: 2,200 kg, total length: 1,850 mm, total width: 1,600 mm, total height: 1,400 mm, Profile bending machine PBT - PBT 35 MACH-ID 9661 Make: PBT Type: PBT 35 Control: PC 300 TOUCH Year: 2006 Front rollers vario adjustable 360 - 1100 mm Power 11 kW each Force pressure in X-Axis 35.000 Kg Hydraulic drive variomatic UNP 200 x 1200 mm T 100 x 100 x 10 x 1200 mm Bar 80 x 80 x 1400 mm Pipe 180 x 2000 mm Horizontal and vertical:Vertical Shaft Ø: 105mm Rcedszguqnjpfx Alcjf Number of rolls: 3 Stroke X-Axis: 390mm Resistance moment: 3000 NmCM³ Working speed: 1 - 16 U/Minmm/min. Length: 1850mm Width: 1600mm Height: 1400mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 095, overall weight: 500 kg, table width: 830 mm, table length: 1,250 mm, stroke length: 300 mm, bending force (max.): 30 t, TECHNICAL DETAILS Redpfx Ajx Rbdxjlcscf Max. stroke: 300 mm Capacity: 30.0 t Table width: 830 mm Table length: 1,250 mm MACHINE DETAILS Motor power: 4.0 kW Control type: Siemens CNC Dimensions & Weight Dimensions (L x W x H): 1,300 mm x 800 mm x 1,700 mm (l x w x h) Transport weight: 500 kg Transport packages: 1 EQUIPMENT Documentation CE marking

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid Rjdpfxex Ii Hvs Alcscf The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, roller (bottom) diameter: 56 mm, roller (top) diameter: 56 mm, roller diameter: 56 mm, sheet thickness steel (max.): 1 mm, - Capacity 1050 x 1 mm - Roll diameter 56 mm Rcedpfer Ixphsx Alcef - Conical roller - Swivel top roller - Documentation

Year of construction: 2000, condition: ready for operation (used), A hydraulic 4-roll plate rolling machine Promau (Prümau) is available. Working width: 3000mm, bending capacity: 13mm, pre-bending capacity: 10mm, rolls: 4. An on-site inspection is possible. Rcodpfx Aszhw Tuelcjf

Year of construction: 1990, condition: good (used), machine/vehicle number: 2ß90 522, Technical specifications: - Bending capacity: - Steel pipe: Ø 20 - 60 x 4 mm - Stainless steel pipe: Ø 20 - 50 x 3 mm - Max. bending moment: 6.2 cm - Max. bending angle: 180° - Max. radius: 125 mm - Bending speed: 8 sec Rsdefndg Eepfx Alcscf - Drive: 400 V / 3 kW - Space requirement: approx. L 2400 x H 1600 x D 1000 mm - Weight: approx. 1400 kg - Includes: - Bending angle control via potentiometer with digital display - 6-fold preselection of bending angles - Internal + external pipe deburring tool - Bending tools Rx2.5D: Ø 38; Ø 50; Ø 65;

Condition: new, Year of construction: 2019, sheet width 1050 mm plate thickness 4,0 mm Rsdpfx Aezh N Uwjlcecf roll diameter 110 mm total power requirement 2,2 kw

Condition: new, Year of construction: 2026, shaft diameter: 80 mm, Profile bending machine AHB 80 - Electro-hydraulic ring/profile bending machine - Hydraulic adjustment of lower rollers - Lower rollers can be adjusted individually - Three driven rollers - Segmented rollers - Digital display - Touchscreen - Hardened rollers and standard rolls - Hydraulically adjustable side straightener - Can be used horizontally and vertically - Mobile control panel - CE marking / Declaration of Conformity Roller diameter 80 mm, hardened Rcsdpfx Aleqxcy Hjcjf Fully hydraulic Motor 400 Volt 50 Hz 3-phase Weight approx. 1,700 kg Dimensions 1340 x 1390 x 1640 mm

Condition: used, Year of construction: 1972, total length: 1,800 mm, total height: 1,400 mm, total width: 2,250 mm, Colour: Green Empty weight: 2.000 kg Price: On request - Year: 1972 - Documentation available: No - CE certificate present: No - Control: Conventional - Transport dimensions: 1800mm x 2250mm x 1400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Rcjdpfxozm N Rij Alcef Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum