Used Straight Knives for sale (3,584)

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Main Cylinder Press Capacity: 200 t - Max. working pressure: 285 bar - Cylinder stroke: 1500 mm - Clear width/clear height: 1500 mm - Distance between columns: 2050 mm - Max. lateral cylinder displacement: 1450 mm - Max. longitudinal frame displacement: 2800 mm - Table plate dimensions: 4000 x 2000 mm - Hydraulic power unit output: 5.5 kW - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil not included in delivery - Hydraulic power units are mounted on top of the press - Hydraulic block and valves by Rexroth - Air filter brand: FILTREC - Oil filter brand: FILTREC - Air and water (cooler) cooling for hydraulics - Stroke cylinder integrated into the working table Rod Diameter: 25 mm - Stroke: 80 mm - Control via cylinder control or hydraulic unit (lever control) - 10 lift cylinders installed - Digital control with position measurement via encoder and pressure measurement with data output - Siemens touchscreen display KTP 900 – 9" for programming (up to 99 programs): - Maximum up and down travel of the cylinder - Pressure holding time at the lower table - Decompression time - Working pressure adjustment - Piece counter - Pre-stop traverse with 0.1 mm accuracy - Alarm management - Frame-mounted display for real-time process parameters - Wireless remote control with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic unit with solenoid valves (replaces suspended control panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - The PLC system is by SIEMENS (S7-1200 series) - Siemens touchscreen LCD (9 inch) MTP900 installed in the control cabinet - Electrical devices from brands SIEMENS, ALLEN BRADLEY, and PHOENIX - System pressure of the pressure cylinder is set via LCD touchscreen - Modes (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable Fpsdpjxrb Nbofx Ab Usr - 99 recipes can be saved, with all parameters programmable for each recipe - Activation via wireless control - Features dual push-buttons for slow/fast cylinder travel, emergency stop button, and operation confirmation - Touch-sensitive safety edge at the bottom of the portal columns for safety - Control cabinet mounted on the bridge side wall - Anti-twist lock for the cylinder - Oil temperature displayed on LCD touchscreen - Overheating warning for hydraulic oil shown on LCD touchscreen - Filter contamination status displayed on LCD touchscreen - System errors displayed on LCD touchscreen - Press status information displayed on LCD touchscreen - Once oil temperature reaches 45°C, the air cooler starts to lower the oil temperature; machine operation stops above 65°C until it cools to operating temperature - Operating manual included - System meets all essential safety and health requirements as per CE regulations

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min Fpodpfx Abewc U Ize Uor power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: excellent (used), Year of construction: 1985, wire diameter range: 1,5 - 7,0 mm cutting length: up to 1.000 mm Fodpemt A Svsfx Ab Uspr wire feeding speed: 29 - 90 mtr./min

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine xH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Fsdpfxjvc Aklj Ab Uopr Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: good (used), Year of construction: 1990, number of straightening rollers: 19, working width: 750 mm, sheet thickness (max.): 12 mm, Year of manufacture / YOM: 1990/ 2023 Overhauled / Overhauled: 2023 Sheet width / Sheet width: Max. 750 mm Sheet thickness / Sheet thickness: approx. 0.5-12 mm Part length in direction of passage / Part length in direction of passage: min. approx. 100mm Feed rate / Feed rate: 2-20 m/min Number of straightening rolls / Number of straightening rolls: 19 pcs Diameter / diameter: 50mm Workpiece infeed height / Workpiece infeed height: 900mm Fpjdsx Eiypopfx Ab Uor Power requirement / Power requirement: 31kW

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages Fpedpfx Absxw Rcus Uer - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: used, wire diameter - max. 10 mm wire diameter - min. 3 mm Fodswu Hg Hepfx Ab Uopr wire length 8 m total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions of the machine ca. LxBxH 2,53 x 0,75 x 1,1 m

Condition: used, material width 320 mm coil weight 2,6 t material thickness 0,5 - 2,0 mm coil internal diameter 400 - 510 mm coil external diameter 1200 mm no. of straightening rolls 7 straightening roll diameter 50 mm number of draw-in rolls 2 band speed 0 - 30 m/min power capacity 1,5 kW weight 1,5 t Dimensions (WxDxH) 2,0 x 1,4 x 1,9 m Straightening machine Fpedpfx Abjvuk Shs Uor with infinitely variable drive, straightening rolls individually manually adjustable, pneumatic alligator opening of the roller cassette Decoiler with pneumatic lag break, manual centralized expansion as is where is, WITHOUT putting into operation in our warehouse Price for commissioning (in given condition) on request

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. Fsdpfx Aofxygwsb Uopr The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: used, Technical details: sheet width: 153 mm material thickness: 1,5 mm Number of Straightening rolls: 4x oben/upper/ariba Number of Straightening rolls: 5x unten/lower/abajo throughput speed: 180 m/min total power requirement: 7,5 kW Weight approx.: 0,543 t space requirements of the machine approx.: L:1,6xB:0,8xH:1,22 m Inside of the machine is a coil taper integrated, whcih can be adjusted via threaded spindle. description: Fpsdpfxju Ic Eko Ab Usr - upper roll : width:160mm, dia. approx. 40mm, not driven, via manual adjustment - lower roll: width: 160mm, dia. approx. 40mm, fixed, not adjustable, driven - coil taper: max. dia.=1000mm, max. width 153mm, max. weight 500kg *

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, working width: 2,000 mm, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 Fsdpfxex Eix Ss Ab Uspr - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 2010, machine/vehicle number: 25438, Offer 25438 Technical Data: - Length 3000 mm Fedpfx Ajxz Axpeb Uspr - Width 1500 mm - Plate height 200 mm - Hole diameter approx. 28 mm - Hole spacing (center-to-center) approx. 100 mm - Weight approx. 1000 kg

Condition: used, sheet width 300 mm coil weight 400 kg coil internal dia. 240 - 640 mm coil outside dia. 1000 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Double decoiler, type MSD 18 (machine no. 18791): Bandwidth: 300 m Spool weight: 400kg Fpedpfopflptjx Ab Uer Coil outer diameter: 1000 mm Coil inner diameter: 240 - 680 mm Straightening machine, type MR17S60M (machine no. 18591): Bandwidth: 100mm Band thickness: 0.2 - 1 mm

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min Fpedpfovuugiox Ab Ujr power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, number of straightening rollers: 9, roller diameter: 36 mm, plate width: 400 mm, number of feed rollers: 2, Double decoiler with straightening machine. Strip thickness: 2.5 mm. Strip width: 400 mm. Coil diameter: up to 1700 mm. Weight per side: 2000 kg. Control system: S7 – Year of manufacture: 2017. Switch cabinet platform is not included in the price. Fedpfexiyytex Ab Uspr

Condition: excellent (used), Year of construction: 2000, Vollmer RC 100 straightening center Fjdevw Nb Tspfx Ab Uepr

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm Fpsdpox Eixzsfx Ab Ujr max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: excellent (used), Year of construction: 2005, pressure 40 t dayligth max ohne Richtbrücke 885/ mm Fsdpfxoxylqle Ab Uspr daylight mit Richtbrücke 595 mm throat 250 mm straightening stroke 170 mm feed down 7-50 mm/sec feed up 0-139 mm/sec table height o. Richtbrücke 700 mm table height m. Richtbrücke 990 mm work piece - max. 1000 mm table length 1500 mm table length m. Verlängerung 2.500 mm table width 305 mm total power requirement 7,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. BTH 2,5 x 1,58 x 2,75 m Includes alignment trolley with connectors Includes work light Includes accessories Includes oil return filter Includes documentation

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m Fpsdpfx Absfn Aqmo Uor decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted.

Condition: used, Year of construction: 1971, material width 180 mm coil weight 0,5 t material thickness 2,0 - 6,0 mm coil external diameter 400 - 1250 mm no. of straightening rolls 5 straightening roll diameter 70 mm Fpedpfovuk H Sex Ab Uer number of draw-in rolls 2 0 roll diameter 110 mm speed 20 m/min power requirement 4,0 kW Weight 2,8 t dimensions (WxDxH) 1,4 x 2,45 x 1,85 m with infinitely variable drive, pneumatic snubber roll, pneumatic intermittent lifting, coil loop control material thickness 2,0 mm at material width 180 mm Material thickness 6,0 mm at material width 40 mm as is where is, WITHOUT additional work The putting into operation in our warehouse can be offered additionally on request

Condition: good (used), Year of construction: 1987, number of straightening rollers: 13, working width: 2,000 mm, sheet thickness (max.): 10 mm, max. sheet width / max. sheet width: 2000 mm Fedpfxsx Eixqj Ab Uepr max. sheet thickness / max. sheet thickness( St 50): 10 mm min. sheethickness Blechdicke / min. sheet thickness: 3 mm Anzahl der Richtwalzen / number of straightening rollers: 13 Walzen / rollers Richtwalzendurchmesser / diameter of straihgtening rollers: 145 mm Richtgeschwindigkeit / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Mittenabstand der Richtwalzen / distance b/n rollers centers: 150 mm Stützwaldermesser / diameter of bottom rollers: 290 mm Anzahl der Stützwalzen / number of bottom rollers 21/24 Anzahl der Abstützungen( oben/unten): 3 /3 Hubgeschwindigkeit der Traverse / speed of adjustm. of traverse: 0,71 mm / sec Hubweg der Traverse / way of traverse: -18 mm to +42 mm max. Schwenkung der unteren Traverse / max. swivel of lower traverse: 8 mm Hauptantriebsmotor / power of main motor: 30 kW Gewicht der Maschine / weight of the machine: 32 t

Condition: used, Year of construction: 1971, material width 300 mm coil weight 2,0 t material thickness 1,0 - 5,0 mm coil internal diameter 440 - 520 mm coil external diameter 1320 mm no. of straightening rolls 6 straightening roll diameter 70 mm number of draw-in rolls 2 diameter of draw-in rolls 70 mm power requirement 1,1 kW weight of decoiler 2,0 t Fsdpfsvut Dtsx Ab Uepr dimensions decoiler (WxDxH) 2,0 x 2,0 x 1,7 mm weight of straightening machine 1,3 t dimensions straightener (WxDxH) 2,7 x 1,3 x 2,4 mm Straightening machine RM-S 300 with infinitely variable drive, pneumatic intermittent lifting, hydraulic inlet table, bending roll, alligator opening, coil loop control Decoiler H 2 with auxiliary drive, pneumatic snubber roll, hydraulic expansion, manually shiftable as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: good (used), Year of construction: 2011, Pressure 160 t Fpedpfox Ehgasx Ab Usr Total power requirement 18.5 kW Machine weight approx. 13.5 t

Condition: used, Year of construction: 1976, material width 400 mm coil weight 3,0 t coil internal diameter 460 - 560 mm coil external diameter 1500 mm Fpsdpjvzxq Esfx Ab Ujr material thickness 0,6 - 3,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm number of draw-in rolls 2 x 120 mm power capacity 5,0 + 1,5 kW dimensions decoiler (WxDxH) 2,5 x 1,4 x 2,4 m weight decoiler 1,8 t dimensions straightener (WxDxH) 1,2 x 1,5 x 2,4 m weight straightener 1,3 t Straightening machine (type RS 67-04 / 0) with geared motor, driven lower straightening rolls, straightening rolls hardened and polished, straightening rolls individually manually adjustable, pneumatic intermediate lifting of the in-feed rolls, roller basket, coil loop control Decoiler (type BA 1-04/030) not driven, with lag break, manual centralized expansion, hydraulic snubber roll, lateral movement, hydraulic lifting table as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1978, material width 500 mm coil weight 6,5 t material thickness 0,5 - 1,5 mm coil internal diameter 420 - 560 mm coil external diameter 1500 mm no. of straightening rolls 17 straightening roll diameter 50 mm number of draw-in rolls 4 speed 6 - 60 m/min dimensions of the straightener (WxDxH) 2,3 x 1,3 x 1,7 m dimensions of the decoiler (WxDxH) 1,3 x 1,2 x 2,0 m straightener (type R 500) with infinitely variable drive, adjustment of the roller box manual centralized Fpodpevuunasfx Ab Ujr double decoiler (type LH 2-1,5-500) with hydraulic centralized expansion, hydro-mechanical lag break as is where is, WITHOUT putting into operation, WITHOUT hydraulic aggregate