Used Straight Line Edging Machine for sale (70,080)

Condition: used, Year of construction: 2024, Bavelloni VE350-8 Straight-Line Vertical Edging Machine. Serial No. 110000297 (2024). Country of Origin: Italy Please Note: Highest bid is subject to vendor approval Fjdps Afxi Aefx Aanopp Location: This lot is located in Burton-on-Trent, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 7,800 mm, Bavelloni Straight Line Edger Model: VE500 11 Fsdpfxsydc I Do Aanopp 11 Spindle Excellent condition Delivery and Installation available

Condition: used, Year of construction: 2010, functionality: fully functional, – Very good condition – Year of manufacture: 2010 – Operating and maintenance documentation (DTR) available TECHNICAL PARAMETERS: – Edge thickness min. - max.: 0.4 – 3.0 mm – Workpiece thickness min. - max.: 10 – 45 mm – Saw trimming unit – Milling unit for trimming excess edge tape flush or with a profile – Designed to remove excess edge tape at the top and bottom edges of the panel Fpedpfew H Rzxex Aansp – Flush milling – Milling of the edge tape at an angle or radius in a single work cycle – Edge overhang milling: Ø 70 mm, Z 6, a=15°, R=2 mm – INSPECTIONS CARRIED OUT BY FELDER SERVICE – COMPACT DIMENSIONS – PRECISE AND VERY EASY TO USE – Table dimensions: 2000 x 300 mm – Air supply requirement: 6 Bar – Power supply: 400 V – Power: 3.2 kW – Glue application roller and glue tank – Grooved glue application roller ensures uniform glue coverage on the edge of the workpiece – Feed speed: 9 m/min – Overall dimensions (L/W/H): 2000 x 1260 x 650 mm – Net weight: 360 kg

Condition: used, machine/vehicle number: 008781, Position 1: Automated Warehouse IMA-CUTTING,EDGING,DRILLING LINE Position 2: Beam panel saws with automatic warehouse IMA-CUTTING,EDGING,DRILLING LINE Position 3: CNC machine centres with automatic warehouse IMA-CUTTING,EDGING,DRILLING LINE Position 4: edge bander batch 1 IMA-CUTTING,EDGING,DRILLING LINE Position 5: CNC for Flexible Drilling IMA-CUTTING,EDGING,DRILLING LINE Fodpfjz Nx Hksx Aanopp Position 6: Robot IMA-CUTTING,EDGING,DRILLING LINE

Condition: used, Coil Handler and Straightening Machine EBU Strip Processing Line Straightening Machine EBU, Type RE 7.50-320 Year of Manufacture 2004 Strip Nominal Width 320 mm Strip Width max. 320 mm Strip Thickness max. 3 mm Strip Cross-Section max. 1000 mm2 Power Supply 400 Volts, 50 Hz Fsdpez Ek Scjfx Aanjpp Unwinding Coil Handler EBU, Type BSH 3/320 Manufacturer 10838, Year of Manufacture 2004 Coil Weight max. 2500 kg Coil Width 320 mm Power Supply 400 Volts, 50 Hz - Central expansion - Drive via geared brake motor - 3 starting arms

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 26695, type of input current: AC, overall weight: 415 kg, conveyor belt speed: 14,000 mm/s, height adjustment type: electric, input voltage: 400 V, grinding belt length: 2,600 mm, grinding belt width: 200 mm, input frequency: 50 Hz, Wegoma KS 2600 FU Edge Grinding Machine – Year of Manufacture 2012 For sale is a Wegoma KS 2600 FU veneer and solid wood edge grinding machine, manufactured in 2012. This machine is ideally suited for grinding veneer edges and solid wood edges, as well as for other grinding applications in professional carpentry and joinery workshops. The long grinding belt, with a length of 2,600 mm and a width of 200 mm, allows for comfortable and uniform processing of workpieces. The machine features a sturdy work table and a robust construction. The belt speed is 14 m/s. An integrated extraction system, in conjunction with a suitable extraction unit, ensures efficient dust extraction. In addition, an Eumacop EVS 48 infeed device from 2014 is mounted. This enables a uniform and controlled workpiece feed and simplifies processing during repetitive grinding operations. Technical data: - Manufacturer: Wegoma - Model: KS 2600 FU - Machine type: Veneer and solid wood edge grinding machine - Year of manufacture: 2012 - Grinding belt dimensions: 2,600 x 200 mm - Belt speed: 14 m/s - Electrical connection: 400 V Fpsds Ahd Thjpfx Aanop - Grinding belt motor power: 2.25 kW - Auxiliary motor: 0.35 kW - Rated current: 6.0 A - Weight: approx. 415 kg Additional equipment: - Eumacop EVS 48 infeed device, year of manufacture 2014 - Dust extraction connection - Sturdy work table - Grinding belt guide with adjustable stops Inspection and test run: The machine can be inspected and tested at our location in Luxembourg by prior appointment. This gives you the opportunity to personally verify the function and condition of the machine before purchasing. Invoice and delivery: - Invoice from Luxembourg - Intra-Community supply to other EU member states to eligible companies, under the legal conditions, with 0% Luxembourg VAT is possible - Loading and transport by arrangement If you are interested or have any questions about the machine, please do not hesitate to contact us. An inspection with a test run is possible at any time by prior arrangement.

Condition: excellent (used), Pre-cutter, adhesive unit for cartridges, guillotine, crosscut saw (front and rear), straight-line cutter, angle cutter, rounding scraper, corner scraper, cut-off saw, polishing machine, year of manufacture 2002. Fedpfx Aozik R Aoanjpp

Year of construction: 2020, operating hours: 10,000 h, condition: excellent (used), functionality: unexamined, FFP1,FFP2,FFP3,Carbon Layer Available Cup type, C type, Duckbill type, Flat-Fold type. Fedpjza E Raefx Aanjpp FFP2 masks are suitable for filtering out at least 94% of airborne particles, including dust, smoke, aerosols, and droplets. They protect against hazardous materials up to 10 times the workplace exposure limit. They are widely used across several settings: Healthcare: Protecting wearers against airborne viruses, bacteria, and pathogens (such as influenza and COVID-19). Construction & DIY: Safeguarding lungs from hazardous dusts generated by drilling, masonry work, plastering, sanding, and handling loft insulation. Industry: Filtering oil and water-based mists, as well as dusts found in woodworking, agriculture, and waste management. An FFP3 mask (Filtering Facepiece 3) is a high-grade respirator used to protect against hazardous airborne substances. It filters at least 99% of airborne particles and is essential in environments with high concentrations of toxic dusts, aerosols, and pathogens.

Condition: used, Year of construction: 2002, The Fogg Monoblock Filler is a type of packaging machine designed for filling and capping bottles, typically used in industries like beverages, pharmaceuticals, and cosmetics. Here’s a brief description: Features: - Monoblock Design: Combines filling and capping processes in a single machine, enhancing efficiency and reducing the footprint on the production line. - Suitable for 38mm Caps: Specifically designed to accommodate 38mm diameter caps, which are commonly used in various bottle types. - Filling Mechanism: Utilizes a volumetric or gravimetric filling system to ensure accurate liquid filling, essential for maintaining product integrity and compliance with regulatory standards. - Speed and Efficiency: Capable of high-speed filling and capping, improving overall production throughput. - Versatile: Can handle various liquid types, from water to thicker, more viscous products depending on configuration. Applications: - Commonly used in the beverage industry for filling soft drinks, juices, and other liquids. - Suitable for pharmaceutical products requiring strict filling standards. - Used in cosmetics for lotions, shampoos, and other liquid products. Benefits: - Streamlined production process reduces handling and transfer times. - Improved accuracy in filling minimizes spillage and product waste. - Enhanced product shelf life due to airtight sealing. Dawson Debagger, which is suitable for 250ml bottles. We used to use the NAMPAK type (50mm x 50mm square), and 2 bags would fit width ways. A total of 6 bags could go on the bed at any one time, meaning a capacity of approximately 1500 bottles. We added a special air operated "gate" to the end where the dogchain is, which was for using PET bottles. As the PET bottles were smooth, they tended to stick together - so the function of the gate was to separate the row of bottles that was about to be swept by the dogchain from the rest of the bottles on the bed,. It worked very well, so we also used it for the HDPE bottles. The overall length is around 4.5m, and the width of the bed is I think 1200mm, with the widest part of the machine at about 1.8m. It runs on single Fpedpfx Aajz Ht Iconop phase power (16a, blue plug or hard wired) and has a variable bed speed setting. Speed: 0-8000 b/hr Depending on Volume Type: Monoblock CIP: Ring for connection Cap Feeder: Included Automation: Authentic Fogg controls Filling Heads: 18 Capping Chucks: 5 Cap Type: 38 mm Bottle Type: square Labeller: Graham Labeller Debagging Table: Dawson Included Collection Table: Included Conveyors: 13 meters and bends Bottle Rinser: Included Available: Immediately

Condition: excellent (used), Year of construction: 1988, Ref:11163 . 1988 Ochsner Edge Gilding Machine Fpodpfx Asz I Tz Esansp For semi-automatic edge gilding of a variety of books but particularly suited to the production of pocket diaries up to A4 books. Equipped with: Hand feeding area for end boards and book blocks 4 sanding stations Brushing station Pre-heating of book blocks Gild foil application with 2 rollers Specification: Max: 50 blocks per hour pocket diary size 25 blocks per hour desk diary size.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 138/1-703 15509125, functionality: fully functional, input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, edge thickness (max.): 15 mm, height adjustment type: electric, actuation type: electric, total height: 2,230 mm, total length: 8,755 mm, total width: 2,416 mm, overall weight: 4,200 kg, Edge bander (for laminated boards): Year of manufacture: 2017 Type: LUMINA 1586 PREMIUM Serial number: 138/1-703 15509125 Control system: HOL-HER EDGECONTROL TOUCH PPC 319 Adhesive technology used: EVA hot melt adhesive in granular form (GlueJet, interchangeable station), L-Tronic laser (interchangeable station) Units: pre-milling cutters, gluing station, pressure unit, trimming saw (two motors, with pneumatic angle adjustment), milling units (for straight and radius edges), edge rounding unit (2 motors, CNC-controlled), sanding units (profile and flat), infeed system (NC axes), polishing unit Fodsz I R Snspfx Aanepp Workpiece thickness: 8 mm – 60 mm Minimum workpiece width: 150 mm Maximum edging thickness: 15 mm Maximum edging thickness in roll form: 3 mm Maximum edging height: 64 mm Machine length: 8.755 m Width with retracted roller support: 1830 mm Width with extended roller support: 2416 mm Minimum height: 1814 mm Maximum height: 2230 mm Workpiece infeed height: 877 mm Machine weight: 4200 kg Electrical minimum connection power: AC 400 V 50 Hz + N … 18A Compressed air, working pressure: 6 bar Compressed air, maximum pressure: 8 bar Chip extraction, connections: 2x Fi 120 mm, 2x Fi 140 mm Zero joint: infrared Electric height adjustment: YES Top conveyor belt pressure unit: YES Maximum feed rate: 25 m/min Infinitely adjustable feed rate: YES Preheating zone: YES Spray nozzles: YES Machine documentation: YES Operating hours: 8,788 h Total number of edged panel sides: 1,138,998 pieces Total length of edged material: 966,123 m Complies with all relevant provisions of the following EC directives: Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2014/30/EU

Condition: used, Year of construction: 2011, Edge processing line HOMAG, consisting of: - Infeed system for longitudinal and transverse parts - One HOMAG edge banding machine with LASER GLUING - Transfer station for longitudinal and transverse output - Return conveyor for automatic circulation Pos. 1 Vacuum infeed system TBP 410 Max. workpiece size 2,800 x 1,200 x 40 mm Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees Pos. 2 Single-sided laser edge banding machine HOMAG KFL610/21/PU/L/25/SI14 For automatic 4-sided processing in 4 passes With SI 14 feeding system for automatic feeding of longitudinal and transverse parts Equipment: - Release agent application top and bottom - Trimming cutters 4.5 KW / Double-trimming cutter 2 x 6.6 KW - Stepless axis adjustment vertical and horizontal - Mortising unit 2 x 4 KW - LASERTAC activation unit 3 KW / optionally PU gluing - Max. edge thickness 3 mm - 24-position roller magazine with servo-controlled edge feeding - Release agent spray device top/bottom - Trimming unit bevel/straight HL 84 / 0.8 KW with 2 motors - Pre-milling unit with 2 motors, each 1.5 KW (pneumatically adjustable to 2 positions) - Release agent spray device top - Profile milling unit FK 23 with 2x8-position tool changer for 20 cycles/minute - Multi-scraper unit MN 21 automatic - Finishing unit FA 11 top/bottom (flat scraper and buffing unit) - Milling unit with 6.6 KW motor, pivotable 90 degrees, stepless axis adjustment vertical and horizontal. With HSK 63 F tool holder - Machine is designed for tool changes in the gap Fodjzvmx Aepfx Aanspp Pos. 3 Workpiece return with chain lifting buffer To decouple processing machines by temporarily buffering. Return via approx. 6 belt conveyors Pos. 4 Vacuum transfer device TBP 410 Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees

Condition: good (used), Year of construction: 2022, 0,4 - 3 mm Fpodpfx Aaj Ai Ufgenop Workingpiece thickness from to 10 - 45 mm Total length ca. 2.800 mm Feed speed 8 m/min. total power requirement ca. 7,1 kw

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Jointing unit: Yes End trimming unit: Yes Radius milling unit: Yes Fodpfxoxix Hxe Aanepp Radius scraper: Yes

Condition: excellent (used), Year of construction: 2011, HOMAG POWER KFL 610 – complete edge banding line for batch size 1 production, year of manufacture 2011 Automated format and edge processing with laserTec, 24-position edge magazine, two BARGSTEDT portals, and automatic return system. For furniture and interior design manufacturers with varying workpiece and edge material requirements. THE BENEFITS OF THE LINE • Four-sided processing in four passes with automatic return and workpiece rotation • Barcode identification, flexible edge sequence, and setup during idle time • laserTec 3 kW for suitable functional edges; alternatively, EVA/PU adhesive processing after manual conversion • Automatic vacuum loading, conveying technology, and chain lift storage with 20 levels EQUIPMENT HOMAG POWER KFL 610/22/PU/L/25 with SI14 infeed. 2 × BARGSTEDT PROFI TBP410/40/28/12/S. 24-position roller magazine A3. RF12 format processing, joining, capping, FK23 profile milling with 2 × 8-position tool changer, multi-profile cutting tool, and finishing unit. powerControl PC22, woodLine PC52, woodScout, and barcode system. TECHNICAL DATA Base machine: workpiece length 240–2,500 mm, width 200–1,200 mm, thickness 10–60 mm. Portals: maximum 2,800 × 1,200 × 40 mm, maximum 50 kg. Laser: workpiece thickness maximum 40 mm, edge thickness maximum 3 mm. Feed rate of base machine 15–30 m/min, depending on processing and units. The 60 mm limit does not apply to the entire line. Format limits depend on orientation and processing; no blanket guarantee of overall line performance. INSPECTION AND DOCUMENTS The system was confirmed to be fully operational on 08.10.2026. Inspection with demonstration possible at the customer's location by appointment. Location: Switzerland. Technical description, layout, photos, and operating videos are available. Please provide your workpiece formats, edge materials, and available installation space so that we can arrange a suitable demonstration. Price on request. Scope of supply, current availability, disassembly, loading, and transport will be agreed upon in the individual offer. Fodpjzt N Egofx Aanspp Internal reference: KL-0-26-002. Technical specifications based on available documents; errors and prior sale excepted.

Condition: excellent (used), Year of construction: 1999, Double-sided, multi-purpose edge-grinding machine with oscillation and 200mm grinding height. Langzauner LZK 4-S with a veneer edge-grinding side and a solid wood grinding side. 200mm grinding width Motorized belt oscillation, therefore no compressed air connection is required. Drive motor 400V / 3kW Front work table for grinding veneer edges, grooved with a stop guide (for veneer overhang). Veneer grinding attachment with fine adjustment, foldable. Spring-loaded table, height-adjustable and can be moved to the side. Angle stop. Rear, adjustable work table for grinding solid wood. Both tables are height-adjustable to make full use of the grinding belt. Fodpfx Aaez I T Aponjpp Belt dimensions 3000 x 200mm. Side extension table for radius grinding on the 150mm belt roller. Feed stand holder 68mm. Central dust extraction connection 140mm. Very stable frame with 2 swivel casters, 2 steering casters, and a lever brake for locking. CE marking. All graphite pads and suction hoses have been renewed. Original paint, with only minor touch-ups in places. Excellent condition from a small restoration workshop. Some grinding belts are included. Dimensions approximately 1800 x 1000 x 1250mm (L x W x H). Weight approximately 650kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this provider".

Condition: used, Year of construction: 2010, 1. Edge banding machine Manufacturer: Homag Type: KAL 210 Ambition 2264 Year of manufacture: 2010 Technical data Release agent spraying system Joint milling unit (2 x 4 kW) Glue application A20 (granule/quick-melt system) Pressure zone with driven pressure rollers Miter saw HL84 (2 motors) Flush-/radius-/chamfer milling unit BF10/BF20 Corner copying unit FK11 (2 motors) Profile drawing blade PN10 Straight drawing blade for glue joint Buffing unit (polishing) Release agent and cleaning agent spraying system at the outfeed Note: Fpjdpfx Aas Ahgf Ijnjp The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1996, type of input current: three-phase, sheet thickness (max.): 1 mm, total width: 2,000 mm, total length: 20,000 mm, total height: 1,900 mm, shaft diameter: 40 mm, input voltage: 380 V, working width: 300 mm, input current: 40 A, spindle motor power: 15 W, coil weight: 1,500 kg, overall weight: 10,000 kg, We are offering this used Dallan T4R-10-300 profiling line/roll forming machine, manufactured in 1996. Manufacturer: DALLAN Type: T4R-10-300 Serial number: 964310.30 Year of manufacture: 1996 Machine specifications: Sheet width: max. 300 mm Fpedpjztcgqefx Aanjp Sheet thickness: ± 0.5 – 1.5 mm Number of stations: 16 Number of cassettes: 5 Design: Roll forming line (16 stations), flying shear Roll diameter: 40 mm Current configuration: Omega profiles Dimensions: 6 x 2 x 1.9 meters Weight: ± 4,000 kg This offer includes only the roll forming machine, including extra cassettes. If you have any questions or would like more information, please send us a message or call us.

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Fodpfxsif Sg Sj Aanopp Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st pass) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm ?? / ??? Working width (min/max) mm 236 / 1300 - Working length (min/max) mm 250 / 5600 Numerical Control / Software ICOS Open (prepared for ZIMBA) Adjustable feeding speed (m/min ) 10 - 70 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.34 (2 x Kw 12,5) adjustable by N.C., with Hydro-Format-tool-system Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt unit) 04.1570 (with Nordson VersaPUR) Pressure zone (adjustable by N.C.) Edge coils supporting unit (No. 12 reels) with servo material infeed Servo material end-trimming knife to cut the reel material Rough Trimming (Milling) unit 08.0555 HS/LS1 (2 x Kw 1) Fine Trimming (Milling) unit (Multi-profile, adjustable by N.C.) 08.0587 HS/LS1 (2 x Kw 0,66) Spraying Unit (for sliding liquid) Profile Scraping unit (Multi-profile, adjustable by N.C.) 08.0516 HS/LS1 Fsdpfxsz Eka Te Aanspp Glue scraping unit 08.522 Buffing unit 08.617-2 (2 x Kw 0,18) - Spraying Unit (for sliding liquid) No. 1 Milling grooving unit 75.34 (Left-Hand) adjustable by N.C. (1 x Kw 8) Hydro-Format-tool-system No. 2 Milling grooving unit 75.34 (Right-Hand) adjustable by N.C. (2 x Kw 12.5) Hydro-tool-system

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: 2230832-269, Barbaric RTS 02 Professional reverse transfer system with destacking, year of manufacture 2023. Workpiece recirculation with 0 - 90 - 180 degree rotation, part measurement, destacking function including stack construction and manual mode for oversized panels. Composed of a removal station RX U4 B2200, conveyor belt L9000 B800, delivery station Comfort, movable table, dual function, steplessly adjustable conveyor belt, support rollers with double track, portal RTS 6100, safety fences and 2 safety light curtains. Largest part 2800 x 1300 mm, smallest 300 x 80 mm, maximum 60 kg. Pick-up with suction cups, up to 12 cycles per minute, transfer speed up to 120 m/min, stacking height 800 mm. Connection 400 V / 50 Hz, 20 A and compressed air 0.6 MPa. Fpsdpfoz Ngg Eox Aanop

Year of construction: 2021, operating hours: 2,608 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 06421, COMANDULLI EDILPLUS 8+6 DX model Belt running direction: RIGHT to LEFT, year of manufacture 2021, #06421 • Annual maintenance last performed on 10/08/26 – only 2,608 operating hours • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 2 pneumatic lower and 2 upper chamfer supports (height-adjustable) • Belt infeed: Calibration/profile support, both axes motorized • Pneumatic finishing/stock support • Belt outfeed: Water nozzle support, both axes motorized • Automatic centralized lubrication system • Table extension console, double-row • Space requirement approx.: 630 x 180 cm, infeed and outfeed area: 300 x 60 cm Optional services available, such as: freight, installation and training Pricing • EXW from the machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories in the pictures are not included in the machine/scope of delivery Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty • Machine sold as is, with no warranty of any kind Inspection possibility • at the operating site near Bitburg Fodez Rk Hfjpfx Aanopp Availability • after delivery of the new machine, approximately February 2027

Condition: like new (used), Year of construction: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with veneer sanding equipment Sanding unit tiltable up to 45° via lever The machine frame is made of welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be activated as needed Sanding shoe with graphite coating for extended belt life Height-adjustable sanding table to utilize the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length variations Double extraction system Extendable roller table extension With rubber-coated sanding drum Veneer edge sanding device with fine-adjustable contact shoe, pressure rollers, and stop rulers Infeed ruler with groove for overlapping veneer Quick changeover from veneer edge to solid wood sanding possible Fpjdpfxey Iu N Ao Aanop Dimensions and Weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Suction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Working Tables Working table length 960 mm Working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Abrasive belt length 3000 mm Abrasive belt width 200 mm Belt speed(s) 20 m/s Sanding surface length 1050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg — Immediately available —

Condition: excellent (used), Year of construction: 2016, power: 12.3 kW (16.72 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used Hebrock AKV 3005 DK-F edge banding machine, manufactured in 2016. Fpjdpfx Aaez Afctonep Voltage: 400 V Frequency: 50 Hz Current: 31.7 A Power: 12.3 kW Machine number: 3141 Year of manufacture: 2016 PLC control with touchscreen The asking price is 20,500 euros net (negotiable). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2025, Schiatti Angelo FPS20RS Glas edging machine for straight edge and arris 6x straight edge spindle (3x Diamond, 2x Polishing wheel, 1x Ceriumoxide) 4x arris spindle (2x Diamond, 2x Polishing wheel) - Glasthickness 3-30 mm Fsdpfx Aajwd E Rpenepp - min. glas size 50 x 50 mm - Max. Loading weight 1.000 KG - Height 812 mm - massive and longlasting conveyer - automatic SPS controlled thickness adjustment - tanks for waste water - 2 meters in- and outlet - Total length 7582 mm