Used Facing And Centering Machine for sale (98,969)

Condition: used, Year of construction: 1968, max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length 0 mm total power requirement 0 kW weight of the machine ca. 3 t Iisdpowwl I Iofx Ag Noh dimensions of the machine ca. 0 m The UMA was built in 1961 and the guides have been rebuilt.

Condition: used, Year of construction: 2000, max. workpiece diameter 40 mm min. workpiece diameter 10 mm workpiece length 200 - 640 mm Control SPS Siemens S5 95 U total power requirement 25 kW Iedpfxevp Sd Io Ag Noih weight of the machine ca. 5 t dimensions of the machine ca. 8,5 x 2,8 x 2,35 m Hydraulic cutting and double-end machining machine suitable for pre-machining trapezoidal thread spindles and other round workpieces in the form of sawing off the bar and double-sided end machining such as chamfering, countersinking and drilling with fixed parts and rotating tools. Machine consisting of: - Basic machine model TR 60/4-650, passage 640 mm - Bar magazine for bar lengths 2 - 3.5 m - Normal version for solid material up to ? 40 mm - Central position of the bar feed rollers - Bar feed unit - Feed gripper in standard version - Cross switch with 4 clamping stations model TR 300.00 - 4 base jaws, width 80/140 mm, contact ? 75 mm - Swiveling cross switch in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic. Clamping - Saw blade guide - Processing unit no. 1 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 3 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 - USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Unloading chute - Millimeter bars for all adjustment movements - Hydraulic system with feed pump SAUER SUNDSTRAND - Pressure accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and container - Coolant pump CALPERA - Electrical equipment in separate electrical control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine light - Flashing light to signal machine downtime - Central lubrication - Chip conveyor. In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy for € 25.000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly been used in recent years; the seller estimates the whole operating hours at around 24,000. Machine under power in sellers factory. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1991, Technical details: workpiece diameter - max.: 8 - 50 mm workpiece length: 5 - 500 mm spindle speed:: 100 - 1000 U/min workpiece diameter - max.: Ø 50 / Vollmaterial mm workpiece diameter - min.: Ø 8 / Vollmaterial mm workpiece diameter - max.: Ø 70 / Rohr mm workpiece diameter - min.: Ø 8 / Rohr mm Ijdeu Iww Uopfx Ag Neih wall strength: 1 - 10 mm centre height: 300 mm spindle hollow: Ø 90 mm cut-off length with swivable stop min/max.: 5 - 500 mm total power requirement: ca. 25 kW weight of the machine ca.: Anfrage t dimension machine xH: 5.,8 x 1,5 x 1,7 m dimensions electric cabinet: 1300x450x1950 mm dimensions L x W x H: panel de control: 0,36 x 0,30 x 0,68 m dimensions L x W x H: alimentación de material: 5,5 x 0,95 x 1,15 m Facing and Centering Machine (Manufacturing process cut to length and deburring possible) Other features: - turning speed of the parting head infinitely 100 - 1000 U / min. - speed end machining 4 wheelsets with speed from 52 - 1320 rpm. - feed push-off head continous, 0 - 0.3 mm / rev, hydraulic - feed deburring device feed infinitely 0 - 175 mm / sec. - feed head 0 - 0.03 mm / rev, continous - material supply speed 170 mm / sec. Operation is via operator panel / control panel i.D. *

Condition: used, Year of construction: 2008, Technical details: max. workpiece diameter: 29 mm min. workpiece diameter: 26 mm workpiece length: 66 mm Iisdpolqac Sefx Ag Noh the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. *

Condition: new, Year of construction: 2024, workpiece weight (max.): 12 kg, - Weight approx. 11.8 kg - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter - No additional material movements, saving crane capacity, man hours and energy energy are saved If machines are in use, you have to crane to the machine and then back again to the picking area - the time lost for 2 centering holes alone is immense. - Ready for use in seconds - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing on the machine) - All components are manufactured in Germany - Centering Din 333 Form A, 60°, 5, 6.3 and 8 mm. Other requests are also possible. A "must have" for every steel dealer! - Selling price: 5.950,- EUR net plus VAT ex stock, freight free within Germany - Scope of delivery: Fixture, Fein cordless drill, charger, - 2 rechargeable batteries - complete in case Isdori Sicjpfx Ag Njih - 3 centering drills 5, 6.3 and 8 mm Din 333 A with surface, incl. 3 holders, one 6 m

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. Iiodpfsxb Ucasx Ag Noh - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Condition: excellent (used), Year of construction: 2003, Model: G50 x 1600 Iiedpsxphw Tsfx Ag Noh Year: 2003 Radius of Arm: 1600mm Spindle Taper: MT5 Spindle Speeds: 25 – 2000 RPM Max. drilling capacity: 75mm iron / 50mm steel

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Iodpju Dahnsfx Ag Neih Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: used, Weighing and Bagging System, comprising of: - - Ishida Multihead Weigher (CCW-EM-214/30) - Ilapak Vegatronics VFFS Bagger (S/N: S977/00) with Zodiac printer - Hopper - Takeaway conveyor Iiedpfx Agjxmhh He Nsh - Ishida metal detector checkweigher (DACS-W-012) - Gantry

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Isdpfxenxi Uuj Ag Njih

Condition: refurbished (used), Year of construction: 1997, The best onion peeler in the world, the most expensive but the hardest, the most simplest ! Iedpfswb Uuxsx Ag Noih Fully services, we can offer full support for our clients, machine been fully refusrbishment and ready to work. Capacity of peeled product depending of onion size: 50-70 mm +-250 kg/h 60-80 mm +-450 kg/h 70-90 mm +-750 kg/h 90mm+ +- 1000 kg /h Machine require air screw compressor min 2700 l/m 5-8 bar We can help configurate your factory!

Condition: ready for operation (used), Can diameter range: 50 mm - 100 mm Can height range: 28mm - 120mm Iijdpfx Aewnriasg Noh Capacity: up to 200 cans per minute Tooling for approx.: 73mm No. or seaming heads: 6 No. of filling pistons: 16 Single knive member separator Driven lifters Siemens touchscreen

Condition: used, Year of construction: 1978, Droop and Rein LFAS130KE Milling Machine Iijdpfxoxnc N Io Ag Neh Axes: X (Table travel) 3,000 mm, Y (Cross-Rail vertical travel) 1,000 mm, Z (Milling Head Saddle on Cross-Rail travel) 1,500 mm, U (Boring Bar vertical travel) 300 mm. Axes Feeds: X min 20 mm/min, max 2,000 mm/min; Y min 20 mm/min, max 2,000 mm/min; Z min 20 mm/min, max 2,000 mm/min; U manually. Note: The X, Y, Z axes are equipped with linear encoders. On the control panel there is a display unit (DRO) for the X, Y, Z axes. For the U axis, direct viewing on a graduated ruler is used. Moving Table Load: max. 20,000 kg/m (uniform distribution on table surface). Moving Table usable surface: 4,000 × 1,600 mm. Moving Table total surface: 4,900 × 1,600 mm. Distance between Table and Cross-Rail: max. 1,200 mm. Machine Weight: approximately 50,000 kg. Overall Dimension of the Machine: L × W × H = 10,000 × 5,000 × 5,300 mm. Machine was made by DROOP & REIN, Germany, in 1978. Accessories include a 4-position at 90-degree Milling Head. Retrofitted in 2000 Coolant System: Yes. Not functional.

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. Iiedpfxsh U Nvke Ag Noh SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: ready for operation (used), D&K System Jr. Year 2006 Format max 68x76 cm Format min 20x28cm Till 500 gsm can work Single Sided Thermal Film Laminator Accufeed Jr. Isdpfx Agjwhcfxo Nsih Automatic Sheet Feeder, Acculam Jr. Laminator, Accu-III Jr. Automatic Sheet Separator, Jogger Catch Tray Delivery

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Ijdpfx Aonxi R Ueg Nsih Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting

Year of construction: 2020, condition: new, A fully automated film rewinding machine according to GMP guidelines. Foil rewinding machine type FUM-900 CP This film rewinding machine is used to rewind film rolls that have run in large systems or are not wound with the correct winding tension, and thus to prepare them for further processing. It was designed according to the special pharmaceutical guidelines and for the processing of PVC film. Advantage of our machine: with two separate drives, we can guarantee both right and left winding. Technical details: Iijdpfxjfwfpbe Ag Nsh Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: In contact with the product: 1.4301 / acrylic Performance: up to 120 m / s Speed: infinitely variable Ø film rolls: max. 450 mm Connection: 230 V / 50 Hz Drive: direct current 0.25 kW

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Iisdpetqmwgsfx Ag Neh Lubeca LW792 can filler Lubeca LW303 can seamer

Condition: new, Year of construction: 2025, FORMA Z folding machine is the most flexible and diverse sheet metal folding machine in our portfolio. Folding both up and down, FORMA Z folding machine eliminates the need to flip material, providing time-efficient folding of complex parts using one operator. The Combi beam rotation between two tooling set ups and the unique geometry gives you unrivalled working space. The automatic tool locking is fast and has features making tool changing very ergonomical. The folding beam has automatic crowning, automatic folding center adjustment and automatic sheet thickness adjustment, which provides superior folding quality in all thicknesses and across the folding length. The large number of vacuum grippers holds the part steadily, anywhere on the back gauge. Large blanks as well as small, one as well as several. The back gauge comes in many designs, which gives you great freedom of choice in how you would like to operate the machine and manage the flow of blanks and parts to/from the machine. Last, but not least – FORMA Z is fast: more production in less time for you! - CNC controlled crowning of folding beam - CNC folder that folds upward and downward, no need to flip the material. - 150 mm movement of folding beam, to move outside of material on folding side. - The Combi beam comes equipped with 203 mm (8”) High Divided Tools and straight rail. - Comes as standard with multifold tooling, CNC controlled sheet thickness and folding center adjustment. - The folding beam can be used as front gauge up to 150 mm. Iodsmhhn Eopfx Ag Nsih - Add vacuum grippers to make work lighter, more precise, and automated!

Condition: new, Year of construction: 2022, functionality: fully functional, FOR SALE – UNUSED MACHINERY | Available for pickup end of 2025 1. QuickWood QRC RO-1300 – Rotary Brush Sanding Machine High-performance rotary brush sanding machine, ideal for preparing MDF panels, solid wood parts, and lacquered surfaces before and after coating. Working width: up to 1300 mm Suitable for flat or profiled panels, cabinet doors, and interior components Equipped with rotating and oscillating brush heads for uniform sanding Designed for both raw wood sanding and sealer sanding (intermediate coat) Adjustable feed speed, brush speed, and sanding pressure Iiedpfx Agsu Abiqj Njh Condition: Brand new, never used 2. Venjakob VenSpray One + Airmix Paint Pump 16C240 – Automatic Spray Coating System Compact and versatile spraying solution for high-quality lacquer applications on wood-based panels. Working width: up to 1300 mm Compatible with both water-based and solvent-based coatings Automated spray guns ensure consistent, even lacquer application Integrated Airmix Paint Pump 16C240 – high-efficiency pump system for reduced overspray, improved finish quality, and precise material delivery Ideal for furniture fronts, panels, and custom components Designed for efficient small to medium batch production Condition: Completely unused Availability: Pickup or shipping can be arranged at the end of 2025 Status: Machines are in factory-new condition – never used or installed

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 401 Aluminyum Pvc Alttan Çıkma Kesim Makinası, - Complies with CE standards. - Precise cutting at 0 - 180 degrees and intermediate degrees - Quick adjustment buffers for 15, 22.5, 30, 45, 60 and 90 degrees - Table fixing arm for intermediate grades - Saw output speed regulator slows down speed and reduces motor load when cutting aluminum. - Protection cover for safe cutting Iodpfjq U Tctsx Ag Njih - Diamond saw diameter 450 millimeters exit distance : 12.5 centimeters - Measuring and transport conveyor is available as standard (2.5 meters right and left) OPTION - Cooling system and Hydro check system are available for aluminum cutting.

Year of construction: 2020, condition: new, Fully automatic system for filling preformed packaging (unit dose) made of plastic for various liquid media. Such as CBD oil, eye solution, buffer solution etc. Models of packaging see appendix - are manufactured by us! Perfomance: 5,000 liquid packages per hour depending on container shape and the viscosity of the product. Dosing range: 1 - 10 ml (depending on packaging) The dosing range is set when the machine is at a standstill, via the dosing pump control unit. Iijdpfx Aofx N Uijg Njh The entire system is constructed according to the requirements of hygienic design and conforms to GMP. If you have any further questions, you can reach us by email or by telephone on the number given.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 0263, type of input current: three-phase, Equipment: rotational speed infinitely variable, FOR SALE: 2015 INTEC Fully Automated Robotic Linish and Polish Cell – 3 x ABB IRB 2600 Robots – Medical Device Spec Available now from Used Machine Tools Ireland Ltd – this 2015 INTEC Robotic Linishing and Polishing System offers a fully automated, high-precision surface finishing solution, ideal for manufacturers in medical devices, aerospace, automotive, and precision engineering. Now Dismantled and Available for Immediate Delivery Includes 3 x ABB Robots 3 x Polishing Stations 2 x Transfer Stations 3 x Control Stations Full Enclosure Fire Suppression System 🔧 Technical Specifications: Robots: 3 x ABB IRB 2600 M2004 Industrial Robots (20kg payload, 1.65m reach – versatile, high-speed, proven performers) Iijdpfjw Amntox Ag Neh Stations: Station 1: Rough Linishing Station 2: Intermediate Polishing Station 3: Final Finishing Transfer System: Includes 2 x integrated robotic transfer stations for seamless part handover Enclosure: Full safety enclosure with external part loading and removal hatch Control System: Allen Bradley PLC controls with user-friendly interface Cycle Process: Operator loads part externally Robot 1 picks and linishes at Station 1 Transferred to Robot 2 for intermediate polish Then passed to Robot 3 for final finish Finished part exits via removal hatch ✅ Condition: Very Good Used Condition Service History: In operation within a clean medical device facility until July 2025 Fully maintained and operational at time of decommission 🌍 Key Features: High throughput and repeatability Ideal for aluminium, stainless steel, titanium and other precision parts Reduces manual handling and variability Complete end-to-end automated surface finishing Perfect upgrade for companies moving to Industry 4.0 and robotic automation 📦 Location: Ireland – Available for immediate inspection Used robotic polishing cell, automated linish machine for sale, ABB IRB 2600 robot polishing line, medical device finishing machine, robotic finishing system, automated surface treatment robot, used polishing machine with enclosure, robotic polishing cell Ireland, ABB polishing robot system for sale

Condition: used, Year of construction: 2004, operating hours: 19,000 h, Serial number: 873xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20699 Specifications: - 2004 model - Approx. 19,000 hours - 17,750 kg - Machine width: 253 cm - Support legs - Shear - Tires (see pictures) - Broken boom - Extra hydraulics - Small leaks in hoses - Trailer hitch - Door lock does not work - Broken front window - Air conditioning - Lights - Ready for delivery Description: We have a 2004 Volvo EW160B wheeled machine with support legs and shear for sale. Small leaks in hoses occur, and the door to the cab does not lock. There are also tires of different dimensions. Otherwise, the machine starts and all functions function as they should, according to the owner. Faults and defects occur and some additional costs must therefore be expected. Ready for delivery Iijdpfx Agowqwrro Njh Hours: 19000 Own weight: 17750 Total Weight: 17750 Width: 253 Model: EW160B hjulmaskin m/ støtte bein og skjær

Condition: used, Serial number: 10641xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21529 Description: Ijdpfx Aoxm Tfkog Noih We have a Topcon fc 5000 and hiper sr w/charging, case and pole for sale. GPS has a top network and service agreement that can be transferred upon sale, according to the owner. Everything works as it should. Ready for delivery