Used Straight Line Rip Saw for sale (17,887)

Condition: excellent (used), chain width 320m cutting height 120mm Motor power: 30 kW max blade diameter 350mm shaft speed 3700 RPM Lhedpfx Ahezxy Snj Sjn shaft diameter 70mm variable regulated feeder 4-24m/min iron cast body

Condition: used, Year of construction: 2022, Panel saw Manufacturer: SCM Type: NOVA 400 Year of manufacture: 2022 Technical data Length of sliding table: 3200 mm Maximum saw blade diameter: 400 mm Power supply: 400 V Machine weight: approx. 718 kg Ljdpfxe Adr Hls Ah Sehn Equipment Sliding table made of aluminum Machine start buttons on the sliding table Parallel fence with digital position display Scoring device for clean cuts in composite panels Cross-cutting fence with stops for repeatable cuts Rip fence with position lock Upper saw blade guard on an independent support arm Extension table for large panels Adjustable saw blade height and tilt angle Control panel with emergency stop button Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - cutting height 30-200mm - max. saw blade diameter 350mm - spindle diameter 70mm - max. width of wood being cut 500mm - working width of the shaft with saw blades 400mm - minimum length of wood being cut 1000mm *from above: - anti-kickback devices - 4 toothed feed shafts – pneumatically pressed *from below: - sliding roller - anti-kickback devices - 2 toothed feed shafts - shafts with saw blades - 2 toothed feed shafts - stepless speed adjustment on an inverter - feed motor 3kW Ljdpezw Duwefx Ah Sjhn - main motors 2x55kW - diameter of dust extraction nozzle 250mm - machine dimensions L/W/H 2150x1880x1800mm - machine weight approximately 3500kg ADVANTAGES – Polish production – twin-shaft multi-blade saw 2x55kW – original DTR documentation + CE – used multi-blade saw, very good condition Net price: 88900 PLN Net price: 20700 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Year of construction: 2006, operating hours: 20,000 h, condition: used, functionality: fully functional, machine/vehicle number: 114058, Used Metla Toledo Safe Line Metal detector Used for 60,000 Buns per hour Taken out of commission in 2024 Air Reject system Reject Bin with Hood and sensor Belt Included Lh hand machine Rh Hand Machine Lhsdpfx Ajy R S Izoh Ssn

Condition: used, functionality: fully functional, type of input current: three-phase, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, – Italian manufacture TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm Lhsdsw H R R Hepfx Ah Ssn – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg

Condition: new, Type MJ1412-40 Feed speed (inverter) 9-35 m/min. Spindle diameter 70 mm Diameter of sawblades 355-405 mm Cutting width 400 mm Cutting height 100/115 mm Min. cutting length 290/480 mm Motor power 37 kW Ljdoitvfpspfx Ah Sjhn Total power 42,1 kW Transport dimensions 3000x1300x1500 mm Weight 2000 kg Price 22450 Eur (EXW Jonava, Lithuania)

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 3398, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, cutting height (max.): 200 mm, blade shaft diameter: 70 mm, Equipment: CE marking, SECOND-HAND 2 SHAFTS MULTIRIP SAW COSMEC MOD. SMB200 - Max. Cutting height mm. 200 - Belt width mm. 400 - Adjustable feeding speed m/min 5/30 - Main motor KW 45 x 2 - Shaft diam. mm. 70 - CE rules - Year 2002 Ledpfx Ahsywd Nkj Sehn

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm Lodpfey In Avsx Ah Sohn No of Grippers: 9 Thin sheet loading: yes

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Lsdpey In Apsfx Ah Sjhn Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes

Condition: like new (used), Year of construction: 2019, Roofing batten Raimann line with minibundling and stacking. Included is: - infeed mechanism - Raimann Profirip 340 (2019) - outfeed rubber belt conveyor - ejecting roller conveyor - accumulating conveyor (before minibundling) - minibundling machine (4 mb/min) - accumulating conveyor (after minibundling) - stacker (7 layers/min) Lhodpfxemk S S Eo Ah Ssn Raimann Profirip 340 parameters: Year of manufacture: 2019 Speed: 10-80m/min Main motor: 55kW Cutting height: 15-140mm Maximum widht: 340mm Line is in good working condition, still in operation and is available for viewing in sawmill in Slovakia. Reason of sale is upgrade to 250m/min planer line. For more information or to arrange viewing feel free to contact us.

Year of construction: 2024, operating hours: 10 h, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 145 mm, TECHNICAL DETAILS Throughput (depending on material, bulk density, and recipe): 200 - 300 kg/h Extruder type: Single-screw extruder / melt extruder Lsdpfjzr Hz Aox Ah Sohn Screw diameter: 145 mm Heating: Induction heating Heating processing temperature: over 300°C possible MACHINE DETAILS Drive Drive power: 45 kW Voltage: 380 V Frequency: 50 Hz Rated current: 84.2 A Speed: 1,480 rpm Protection class: IP55 Insulation class: F Operating mode: S1 – continuous operation Sound level: 71 dB(A) Year of drive manufacture: 2022 Star/delta connection possible Suitable plastics: LDPE, HDPE, PP Suitable materials: Ground material, EPS, film scraps, ground film, and light plastic waste Material feed: Suitable for materials with low bulk density Operating hours: 10 h EQUIPMENT Metering device Hopper for material feed Large filter / screen changer Adapted die

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Lhodpfx Ahei Akrke Sen Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: new, Type MJ1435F Feed speed (inverter) 6-35 m/min. Spindle diameter 70 mm Diameter of sawblades 250-355 mm Lsdsd Nlvpepfx Ah Sehn Cutting width 300 mm Cutting height 100 mm Min. cutting length 360 mm Motor power 22 kW Total power 26,1 kW Transport dimensions 2670x1200x1500 mm Weight 1700 kg Delivery term: ~ 3 months.

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets Description: Complete system for dosing and packaging dry ice pellets. Fully automated process with high capacity and reliability. Advantages: Additional information about the bagging machine. Dimensions of the system The entire system is 6 meters long, 3.20 meters high, and approximately 1.20 meters wide. The round turntable (disc) has a diameter of 1.5 meters. The system does not need to be installed in a completely straight line. The system can be rotated 90 degrees in two sections, creating a U-shape. This allows the machine to be installed in smaller spaces without affecting its operation. The height of the system is not adjustable. Output of the machine Lhjdpfsw Ttxfjx Ah Sen The machine has a capacity of approximately 500 kg per hour. Dimensions and weight of the bags The bag sizes can be fully adjusted to your needs. This ranges from small bags of approximately 750 grams to larger bags of 20 kg. This can be flexibly adjusted to meet your production needs. Maintenance costs The average annual maintenance cost, excluding materials and call-out charges, is between €1200 and €1500 per year. Worldwide Shipping. Cold Jet Prime 600, Cold Jet Prime600, Cold Jet dry ice dosing & bagging system, dry ice dosing machine for sale, dry ice bagging machine for sale, dry ice production machine, dry ice production machine for sale, dry ice dosing and packaging system, automatic dry ice dosing machine, automatic dry ice bagging system, dry ice pellet production & packaging, dry ice packaging equipment, industrial dry ice production system, dry ice pellet production machine, dry ice pellet making equipment, dry ice pellet packing machine, pelletizer & bagging system, dry ice pelletizer bagger, Cryogenic dry ice production equipment, CO2 dry ice production machine, dry ice manufacturing system, dry ice production & dosing system, used dry ice dosing machine, used dry ice production machine, refurbished dry ice machine, dry ice supply system, high capacity dry ice production system, automatic CO2 pellet bagger, liquid CO2 to dry ice converter, dry ice bag filling machine, dry ice packaging automation system, industrial packaging machine dry ice, high output dry ice system, adjustable bag size dry ice, dry ice buffer tank system, 500 kg/h dry ice production, worldwide export dry ice machinery, industrial dry ice packaging, cold chain dry ice packaging equipment, food grade dry ice packaging machine, logistics dry ice dosing & bagging, dry ice dosing & shipping solution, dry ice dosing system Netherlands, dry ice dosing system Noordwijkerhout, DrDryice, dry ice production equipment Europe, Cryogenic pellet production systems, dry ice manufacturing equipment for sale, dry ice production line, dry ice pelletizer PR series, integrated dry ice dosing systems, industrial CO2 pellet production, dry ice automation system, dry ice bagging & dosing automation, high reliability dry ice machine. DrDryice

Condition: good (used), Ari Vislanda sawmill Kockums chippers + double profiling line capacity 75,000 m3 timber per shift. Only one operator required. Lisker control for Ari/Kockums line and edging line as well. Lsdpezdplzofx Ah Sehn

Condition: reconditioned (used), Year of construction: 1998, machine overhauled, major overhaul Lodot Dxwaspfx Ah Sjhn - year of production 1998 TECHNICAL PARAMETERS: diameter of the main saw ⌀ 350 mm max. sawing height 70 mm max. sawing width 150 mm engine power 3 kW rotational speed of the spindle 4500 rpm diameter of spindle tip ⌀ 30 mm nominal pressure of compressed air 0,6 Mpa frequency of working cycles 0 - 28 cycles/min max. stroke of saw 100 mm connection diameter of suction nozzle 1 x ⌀ 125 mm air demand (in dust extraction system) 1300 m3/h height to table surface 850 mm weight 160 kg The DMDK-35 circular saw is used for transverse sawing of wood. The maximum cutting width is 220 mm with a height of 35 mm. The saw is controlled by a foot switch. The saw guard assembly is equipped with safety curtains. The material is pressed with two point presses. This is an efficient saw, it has an infinitely adjustable feed speed in the range of 0 -28 cycles/min. The saw is often used to manually cut out defects in the material. net price invoice va

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Lsdpjz En Axofx Ah Sjhn Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Gantry with stairs 3 infeed elevators Ice Viper Printer Lhodpfx Aevw Egreh Sen Set of wash walls to suit 2 x Cross feed conveyors All manuals and spare parts included Can be seen running In excellent condition

Condition: excellent (used), Year of construction: 2007, BIMAX TA 91 Automatic Circular Saw TECHNICAL DATA Total power requirement, rotary current: 3 x 400 V For pneumatic machines: 3 kW For hydraulic machines: 3 kW Customer-provided mains fuse: 16 A Supply line: 4 x 2.5 mm, 3P + E Air connection: Diameter: 12 mm Supply line: 8 – 10 bar, 40 l/min Operating pressure: 6 bar Spindle drive via three-phase motor: B5-100S 4/2-pole, Dahlander circuit: 1420 / 2840 rpm Power: 1.8 / 2.5 kW Saw blade mount: 32 mm Drive pin: 8 mm Pitch circle of drive pin: 45 mm Lsdpfxev I Dmlo Ah Sshn Cutting wheel mount: 22 mm Saw blades: 160 x 1 to 300 x 2 mm Passage range: Round up to 65 mm Square up to 55 x 55 mm Rectangular up to 80 x 50 mm Standard clamping jaw for diameters: 10 – 60 mm Material feed length: 0 – 250 mm Saw weight: 500 kg Hydraulics: 120 kg No liability is assumed for the accuracy, completeness, or timeliness of this information.

Condition: new, Year of construction: 2026, Compact circular saw with a pivoting saw blade and a high-quality, anodized aluminum crosscut fence. The cutting plane of the compact circular saw is directly on the roller table. Precision-guided aluminum crosscut fence, anodized as standard. Large table extension guided on a telescoping arm and adjustable in length. The standard table extension and table widening allow for easy work with larger workpieces. The large saw unit made of cast iron is double-mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron, making it extremely robust and durable. Smooth operation and precise cuts. Lodpfxjcnxamo Ah Sohn Aluminum crosscut fence. Equipped with a tried-and-tested ball contact system. Dust and dirt resistant due to minimal contact point between the ball and the trapezoidal rail. 10-year HOLZKRAFT warranty on wear of the hardened guide rails. Telescopic fence. Extendable aluminum telescopic fence. Angle adjustable. With two professional folding fences. Parallel fence. Standard with fine adjustment and quick clamping. Scope of delivery: Table extension Table widening Anodized aluminum crosscut fence Parallel fence with round bar guide and fine adjustment Model: SC 2 classic Item No.: 5504215 Technical data Table dimensions: 1020 x 325 mm Table height: 900 mm Fence length: 1660 mm Cutting height max. 90° with scoring blade: 100 mm Cutting height max. 45° with scoring blade: 79 mm Cutting width max. to the left of the saw blade: 1270 mm Cutting width with parallel fence: 900 mm Saw blade tilt: 90° - 45° Saw blade diameter max. with scoring blade: 315 mm Saw blade diameter max. without scoring blade: 315 mm Scoring saw blade diameter (optional): 80 mm Main saw blade speed: 4000 min-1 Scoring saw blade speed: 7600 min-1 Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Dust extraction port diameter: 120 mm Dust extraction port diameter on the saw blade guard: 60 mm Weight: 295 kg Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, Holzkraft HBS precision wood band saws for the craftsman Top quality, workmanship and price-performance ratio Particularly quiet and precise running thanks to a torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, with a precisely ground and polished surface. Quick saw band tensioning via eccentric lever on the back of the machine Standard with two speeds Precise 3 roller saw band guides, standard at the top and bottom from HBS 351 Quick cutting height adjustment via rotary knob and rack with millimeter scale Smooth-running aluminum parallel stop with eccentric quick clamp and magnifying glass Standard miter angle stop, adjustable by 60 degrees on both sides Aluminum parallel stop with eccentric quick clamp Technical data: Work table dimensions: 495*356 mm Cutting speed: 650/400 m/min Flywheel diameter: 356 mm Max. cutting height: 200 mm Max. cutting width with stop: 321 mm Saw band length: 2562 mm Precision guide 3 rollers: top/bottom Lhodpfsvk Sdksx Ah Son Saw table inclination: -10 degrees, + 45 degrees Motor power: 550 watts/230 volts Weight: 80 kg Dimensions in mm: 610*445*1753 Extraction nozzle diameter: 100 mm Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Cut-off and miter saw, type: ZS 200 N - 5 KW motor with machine stand, Machine operated via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade arbor bore 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm The saw can be tilted to an acute angle of up to approx. 25 degrees on one side and can be tilted to the left up to 30 degrees. Tungsten carbide circular saw blade 520x4.0/2.8 x 50 mm, 60 teeth, negative bevel, for wood RLH-ST60, 6.0 m measuring length, mounting side: Left Length stop / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital measuring display, stop slide pneumatically releases, stop flap folds back, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connecting piece: overall length: 6.7 m Additional cost for digital electronic display unit type: FIAMA EP6 for 230 volt mains operation, with electronic on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60, 4.0 m long feed roller conveyor Mounting side: Right Lodok H Ic Uepfx Ah Sshn Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connecting piece Location: In stock, 54634 Bitburg - immediately available - Image: similar. Machine is still in original packaging.

Condition: excellent (used), Year of construction: 1982, Ulmia table saw Type 1710 S Make No. 2943 Year of manufacture 1982 With sliding table Swivel saw blade Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 121 kg Location: ex stock 54634 Bitburg - immediately available - Lodpfsr Elmwex Ah Sshn

Condition: new, Year of construction: 2026, Heavy-duty, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grids Integrated small parts support made of wood Super Silent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight: approx. 910 kg Cutting depth: 60 mm Saw motor power: 3.9 kW (5.3 HP) Saw blade diameter: 250 mm Saw blade bore: 30 mm *1 Emission sound pressure level at the workstation LpA: 82 dB *2 Saw blade speed: 5250 rpm 2 extraction ports: ø 100 mm Connection value: 4.8 kW Mains connection: 3 x 400 V / 50 Hz Cutting range: L: 4600 mm; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - VSA scoring saw, stepless adjustment - Strip stop - Mechanically braked support rollers Lhodpfx Aeihahboh Son - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available - Photo shows optional digital display, which is not included in the offer.

Condition: good (used), Year of construction: 1993, 1 x Graule Crosscut and Mitre Circular Saw Type ZS 170 Lhodpsyxxzwefx Ah Sjn Technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° - Mitre range horizontal: 45°-90°-25° - Saw blade diameter: 420 mm - Extraction port diameter: 100 mm - Weight: 120 kg Location: ex-stock 54634 Bitburg - immediately available -