Used Straight Line Rip Saw for sale (33,914)

Condition: good (used), Capacities: Capacity 360 mm diameter , Prsdpeig T Abofx Adied Rectangular 704 x 360 mm at 90 degrees or 340 mm diameter , Rectangular 400 mm x 340 mm at 45 degrees. Input 415/3/50 4kw approx. Speeds 20-120 meters per min. Swivel frame 0-45 degrees. Vice opens 710 mm. Measuring Head. Infeed / Outfeed powered rollers. Infeed / Outfeed Cross transfers

Condition: used, Small log line with Chipper-canters and single blade splitsaw Feeding / sawing speed 60 m/min. Pjdpfxjiiciqo Adierd The line consist of below parts: - Conveyor for logs - Centring infeeder with log turner - First chipper-canter for round logs - Out feed conveyor - Block tilter - Infeeder to second canter - Second chipper-canter for blocks - Out feed conveyor - Single blade splitsaw We can also offer the equipment serviced

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete wood sawing line for pallet production with stacker, formatter, chipper, edger and dust removal. Year of production 2021 Technical data: - Max wood diameter 480 mm - Min wood diameter 120 mm - Min wood length 1500 mm - Max log length 3000 mm CAPACITY UP TO 200 m3 per shift THE SAWING LINE CONSISTS OF THE FOLLOWING DEVICES: 1.BRODPOL SAWING LINE consisting of: - Log feeder - Longitudinal feeder of the sawmill - Disc sawmill – 110 and 90 kW engines - Roller receiving table with a mechanism for dumping edge and side boards - Driven roller table - SB 4000 base table - WP 210 two-shaft multi-saw – 110 and 75kW engines - Receiving table with dumping boards and feeder to the stacker - Lower return conveyor of the edgers, side feeder to the edger and conveyor belt to the chipper - sieve for sawdust 2. LIGNUMA OFZ 300 EDGER and EDGER Year of production 2023 The machine consists of the following components - centering table - MN 315 edger - SC-2 separating table - OFD 500/K edger 3. JABŁOŃSKI SD-250 E BOARD STACKER WITH CUTTER The device consists of the following components: - buffering conveyor - gooseneck feeder - formatter - buffer - stacker Pjdpfx Adev Dm T Tjierd - driven output roller conveyor - straight driven roller conveyor - pallet lifter 4. TEKNAMOTOR SKORPION 650 CHIPPER EB/2 with feeder and receiver. 5. COMPLETE DUST EXTRACTION INSTALLATION FOR ALL DEVICES

Year of construction: 2015, condition: good (used), Jocar Log Carriages, strong band line set consisting of: entrance transfer, half moons,Log Carriages whith Three fixed Headblocks model 30P900/SM/NR, mounted on a mechanical structure, desk with Mudata positioning system, all inside a closed cabin, exit roller train , Jocar band saw device model 1250/165/NR, with a diameter of 1250mm flywheels, bicut, the input transfer is 4 chains 12000mm long, the carriage is 3 towers ideal for wood cuts 1000mm minimum, since the distance It is from the first to the second 750mm and from the second to the third 1350mm, max length 3 meters, all Jocar machinery from the year 2015 Predpfolzgncjx Adisd

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: MJY 142S-35, MJF 143-1535, MJY-MJF production line from the Chinese manufacturer China SHENGONG. The equipment was commissioned in 11/2022 and is designed for processing round logs with a maximum diameter of 340 mm and length of 5 m. The technology comprises: - Log infeed deck for 5 m logs with dosing and centering - Infeed conveyor to the machine - Double-shaft canting saw MJY 142S-35 - Outfeed pressure rollers - Distribution outfeed conveyor for cant and side boards - Side boards conveyor - Cant conveyor with lateral ejection and flipping - Cant conveyor to multi-rip saw Prjdpfsw Rg Emsx Adijd - Centering unit before multi-rip saw - Double-shaft multi-rip saw MJF 143-1535 - Lumber conveyor behind the saw - Side chains and lumber conveyor - Edging saw MJ 141-0440 with 5 lasers for saw blade positioning - Roller conveyor before and after the edger - Belt conveyor under the Multipris for offcut removal - Connecting belt conveyor - Belt conveyor under the multi-rip saw for offcut removal to chipping - Belt conveyor for removal from the hall - Chutes and conveyor connections - Accessories: hydraulics, electrics, and control system The price of the technology is without dismantling and at FCA Nepomuk Incoterms.

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts Prsdpfoif Sg Sox Adiod - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Prsdpfxjvpafyo Adied Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg

Condition: good (used), Complete Resaw Line from intake to stacker with an Prjdsm Uylpepfx Adied AKE TB2B twin rebandsaw

Condition: good (used), I sell the multirip saw of czech production TOS Svitavy PKSN32. Psdemk E D Ijpfx Adijrd Cutting height under the blade 120mm / possibility of adjustment Width of cut on the feed belt max. 350mm. Open design / possibility to insert wider workpieces Motor approx. 45 KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator up to 36 m/min. Total weight approx. 3500kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: used, Year of construction: 2001, machine/vehicle number: AB145642, MULTIRIP SAW SCM MOD. M3 – CE RULES - Year of manufacture: 2001 - Serial number: AB145642 - Power supply voltage: 400 V / 50 Hz - Motor power: 18.5 kW - Blade rotation speed: 4,200 rpm - Maximum blade pack width: 300 mm - Conveyor belt width: 300 mm - Maximum blade diameter: 350 mm - Minimum blade diameter: 200 mm - Minimum workpiece length: 390 mm - Blade bore diameter (shaft): 70 mm - Keyway dimensions on blade shaft: 20 x 5 mm - Distance from machine base to first right blade: 200 mm - Conveyor feed speed: continuously adjustable from 6 to 48 m/min - Conveyor type: with direct-joint spheroidal cast iron pads Pjdpfxjwr Elpo Adijrd - Conveyor guide rails: low-friction, one with prismatic profile for perfect straightness - Conveyor lubrication: automatic - Clutch: present on feed speed variator - Working table height from floor: 750 mm - Working table dimensions: 1,530 x 950 mm - Dust extraction port for blades: Ø 200 mm - Dust extraction port for conveyor: Ø 120 mm - Air volume extracted (at 25 m/sec): 3,850 m³/h - Programmable fence: with turret stops, pneumatic positioning via foot pedal - Laser reference: for cutting line - Base frame: made of single-block cast iron

Condition: excellent (used), functionality: fully functional, saw blade diameter: 350 mm, chain width: 300 mm, extraction nozzle diameter: 150 mm, working height: 110 mm, type of input current: three-phase, height adjustment type: mechanical, saw blade bore: 70 mm, spindle diameter: 48 mm, OGAM PO-280 Track Multirip Saw Specification: • Condition – used, after complete overhaul • Manufacturer – OGAM • Model – PO-280 Psdpfx Adextc Iusiord • Track width: 300 mm • Max working height – 110 mm • Main motor power: 25 HP (~18 kW) • Maximum blade diameter: 350 mm • Spindle Ø48 mm, sleeves Ø70 mm • Track feed speed adjustment range: 5–40 m/min • Track in very good condition, no wear • Extraction nozzle Ø150 mm • Weight – approx. 2000 kg • Overall dimensions – 190 x 150 x 165 cm (W x L x H) Additional information: • The machine is in very good technical condition, ready for immediate use • The photos shown represent the actual condition of the item for sale • Test running and inspection of the machine on site are possible.

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift Pjdshx R Etspfx Adiord - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: excellent (used), Year of construction: 2012, DRILLING MACHINE: Power consumption, kW 9 Maximum thickness of the processed wall 40 mm Psdpfx Aevkp Dhsdiord Minimum thickness of the processed wall 6 mm Diameter of holes 6 - 40 mm Tool rotation speed 0 – 2100 rpm Tool change automatic Feed gripper movement speed 1 – 720 mm/min Horizontal clamping force 1 x 2.5 tons Vertical clamping force 4 x 1.5 tons Dimensions of workpieces to be processed: Maximum 1200 x 600 mm Minimum 80 x 6 mm SAWING MACHINE CPI 105DI

Condition: ready for operation (used), Planing and re-saw line with below main equipment: 9 head planer type WACO 3000 Pjdpfx Aoxb Akljdijrd Feeding speed 0 - 90 m/min Max planing width Min planing width Max planing height Min planing height Canali double bandsaw type ML1100 Marking equipment Stacker and packing machine Press for packages Grinding equipment for planer. For more data and information please see below link to youtube

Condition: excellent (used), max cutting height 80 mm max workpiece width 700 mm spindle working width 720 mm max disc diameter 230 mm disc bore diameter 80 mm Pjdpoxciyiofx Adiord

Condition: used, functionality: fully functional, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, type of input current: three-phase, – Italian manufacture TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment Prodow H R R Hopfx Adijd – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg

Condition: good (used), Year of construction: 2000, IPM inline pipe saw TP400 up to D=400mm Prjdsvzrcbepfx Adijd

Condition: new, Year of construction: 2025, type: straight cutting bandsaw 90° sawing process: automatic automation: serial-cut max. cutting capacity Ø: 330 mm max. cutting capacity width: 350 mm max. cutting capacity height: 330 mm Highlights: • Fully enclosed high performance bandsawing machine for safe, clean, and quiet operation Pededr Sabepfx Adisrd • Compact and practical construction: space saving, easy to access during machine commissioning, saw blade change (large doors) and maintenance activities (inspection openings) • Carbide compatible power-package: sawing of solid material, tubes, and profiles. Trouble free cutting of hardened material while saving blade life • Maximum, reliable productivity for continious runs in single- and multi-shift operation • Secure transport of material by closed roller table. Increased, hardened tensioning elements and a high clamping force guarantee an efficient transport of materials. The result: product quality • Dynamics and power: saw feed and material feed by ball lead screw with servo-motor for accurate cuts, without compromises • Precision and reliability: use of latest linear ball guideways to provide solid smooth running • Minimum length of remaining piece by innovative vice system

Condition: new, Year of construction: 2024, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Pjdpfx Adjgwt S Eeijrd Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: reconditioned (used), Year of construction: 1998, machine overhauled, major overhaul - year of production 1998 TECHNICAL PARAMETERS: diameter of the main saw ⌀ 350 mm max. sawing height 70 mm max. sawing width 150 mm engine power 3 kW rotational speed of the spindle 4500 rpm diameter of spindle tip ⌀ 30 mm nominal pressure of compressed air 0,6 Mpa frequency of working cycles 0 - 28 cycles/min max. stroke of saw 100 mm Pedpfjt Dxwajx Adiord connection diameter of suction nozzle 1 x ⌀ 125 mm air demand (in dust extraction system) 1300 m3/h height to table surface 850 mm weight 160 kg The DMDK-35 circular saw is used for transverse sawing of wood. The maximum cutting width is 220 mm with a height of 35 mm. The saw is controlled by a foot switch. The saw guard assembly is equipped with safety curtains. The material is pressed with two point presses. This is an efficient saw, it has an infinitely adjustable feed speed in the range of 0 -28 cycles/min. The saw is often used to manually cut out defects in the material. net price invoice va

Condition: excellent (used), Year of construction: 2010, Automatic technological line for sawing wood Technical data: - Max wood diameter 400 mm - Minimum wood diameter 120 mm - minimum timber length 1500 mm Predpfslar Rijx Adijd - Max log length 3200 mm CAPACITY UP TO 200 m3 per shift The machine consists of the following elements: - Log loader - Sawmill longitudinal feeder - Sawmill TT 5/600/400 G - Motors 75 + 90 kW - Receiving roller table with ejecting mechanism for edgings and side boards - Driven roller table - Base table SB 4000 - Multi-saw WP 210 - 2 x 75kW engines - Receiving table - Lower return conveyor of edgings, waste to the chipper The machine is in good condition, in continuous operation - the possibility of viewing during operation

Condition: new, Year of construction: 2025, functionality: fully functional, MULTIRIP CIRCULAR SAW AND EDGER - IN ONE MACHINE 20-160: 🔹 Main Drive Motor: 37–75 kW for consistent, powerful cutting 🔹 Flexible Cutting Configuration: • 1–4 fully adjustable movable - HYDRAULIC OR SERVO - heads • 1 fixed head, with the option to mount multiple fixed circular blades 🔹 Customizable Board Width: Up to 1000 mm or 1300 mm — tailored to your production needs 🔹 Advanced Mechanisation Options: • Manual or motorized feeding • Centering systems for precise positioning • Outfeed conveyors with integrated sorting lamellas for efficient waste handling Predpfx Aowf Ihtjdied • Fully adaptable to your specific requirements Built for durability. Engineered for precision. Designed to optimize your production flow. 👉 Contact us today to customize your EDGER 20-160 to your exact specifications!

Year of construction: 2008, condition: good (used), GRAEWE PS500 inline pipe saw up to D=500mm Podpfx Asvzq Uiodijrd

Condition: new, Year of construction: 2025, Product information for metal bandsaw type: straight cutting bandsaw 90° sawing process: automatic automation: serial-cut max. cutting capacity Ø: 300 mm max. cutting capacity width: 300 mm max. cutting capacity: height: 300 mm Technical data: Motor [kW]: 3 Saw blade [mm]: 4900 x 34 x 1,1 Dimensions [mm] (length x width x height): 2500 x 1650 x 1800 Weight [kg]: 2500 Material weight: max. 250 kg/m Highlights: Machine cover: secure and compact Saw blade guiding: accurate and reliable Saw frame speed: powerful and dynamic Vice system: innovative and smooth Operation and control: intelligent and ergonomic Pedpfxjdr Sbke Adijrd

Condition: used, Max. depth of cut Min depth of cut 75 Max. width of cut 700 Predpfx Adjulp Hhoijd Max distance between saws 450 Min distance between saws 32