Used Styrofoam Shredder for sale (1,020)

Condition: ready for operation (used), Grinder, Shredder, Moditec G4 SACP, Used machine Cedjx Da Eljpfx Afleaa Manufacturer : Moditec Type : G4 SACP Overall dimensions : 1480 x 520 x 1430 mm Weight : 340 kg Year : 1999 Electrical data : 400 V ; 2.2 kW Feeding hopper : 580 x 340 mm

Condition: good (used), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 390, total length: 11,000 mm, total width: 3,000 mm, total height: 4,200 mm, overall weight: 35,000 kg, hopper volume: 5 l, rotor diameter: 860 mm, rotational speed (max.): 45 rpm, power: 404.52 kW (549.99 HP), Equipment: rotational speed infinitely variable, Arjes Titan 900 Demo machine Year of manufacture: 2025 Hours: 380 Csdpfx Ajxraigofleaa Equipped with paddle rotors and/or star rotors Also standard equipped with: - Magnet - Reversible fan - Remote control

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Codov Sqrpjpfx Afljaa Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 900 h, functionality: fully functional, HAAS Tyron 2000 XL 2.0 Year of manufacture: 2023 Approx. 900 operating hours - Crawler undercarriage Caodpfxjm H T R Es Aflea - Scania diesel engine 294kW / 400HP – emission stage V - Fine tool configuration 9/9/4 - Neodymium overband magnet, hydraulically height-adjustable - Generous tilting hopper - AWG approval under §52 The machine is suitable for waste wood, green waste, roots, and various types of waste...

Condition: good (used), Year of construction: 1993, Rotor width 800 mm Caedpfjp H Sv Djx Aflsa 22 kw motor 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 5020, power: 45 kW (61.18 HP), Stationary wood chipper with 45 kW electric motor. The Hackkontrol HC 960 control system was replaced two years ago. This control regulates feed-in when the speed drops and can be adjusted as needed. The wiring in the connection box was also overhauled two years ago, so the chipper can be connected using a cable with a minimum of 100 Ah, preferably 125 Ah, and can be put into operation directly. The chipper is robustly constructed and fully operational. Machine documentation is available and spare parts are still readily obtainable. Cedpfx Afjxy Rrzjljaa

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Rotor width: 1400 mm Rotor knives: 76 / 114 Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Cjdextgkmspfx Afljaa Drive motor: 2 x 30 kW

Condition: good (used), Year of construction: 1995, shredding by 3 HARDOX-coils (spirals) diameter x length: approx. 500 x 1.700 mm opening: approx. 1.100 x 1.700 mm new base frame with steel construction new feed-hopper 8 m³ new control cabinet Cajdpfx Ael I Dx Noflja incl. 7 unused spare coils

Condition: good (used), Wood shredder for sale Prepared for conveyor belt removal Ideal for shredding wood residues (all types of softwood) and pallets Includes hydraulic pusher Motor: 7.5 kW Rotor width: approx. 82 cm Weight: 1,460 kilograms Full load current: 32 amp Main fuse: 35 amp Casdpsxbyx Tefx Afloa

Condition: used, Year of construction: 2014, functionality: fully functional, Single-shaft machine. Dimensions of the feed hopper: 1300 x 1400 mm. Hydraulic pusher with adjustable pressure and speed, depending on the power consumption of the rotating drum. Caodpfx Asx Anq Hoflea Drive via gear motor with V-belt. Robust rotor made of certified construction steel. Rotor width: 1300 mm. Hopper length: 1400 mm. Rotor diameter: 368 mm. Main motor power: 30 kW. Teeth and counter-blades made from wear-resistant material. Replaceable reversible blades. Dimensions of reversible blades: 40x40x20 mm. Replaceable screen basket. Total weight: approx. 3,100 kg. Supply voltage: 380 V – 50 Hz.

Condition: good (used), Year of construction: 2006, Chipper with rotor width 800 mm Cedpsxyud Iefx Afleaa Rotor diameter 368 mm with 40 knives Motor 22 kW Only 850 operating hours

Condition: excellent (used), GROSS GAZ 62 shredder 15 kW motor, Rotor length: 600 mm, 14 knives on the rotor, Hydraulic drawer 0.75 kW Caodpsxzfbgsfx Aflea 20 mm screen, Rotor diameter: 252 mm Autoreverse, Sharp knives on the rotor and counter-knife Weight: 1300 kg Year of manufacture: 2016, only 250 operating hours

Condition: excellent (used), CATALOG NUMBER 7726 TECHNICAL DATA - Feed hopper inlet – hydraulic lift 1200x1000mm - Discharge outlet for shredded wood diameter 200mm - rotor working width 980mm - Main motor 37kW - Number of knives 52 pcs - Knife size 40x40mm - Screen 20/25mm - Pressing drawer (hydraulic pusher) - Electric auto-reverse - Dimensions (L/W/H) 2520x2000x1740mm - Weight approx. 2500kg ADVANTAGES – German made – Screw conveyor (for wood chips) – Pressing drawer, serrated – Knives as new – New counter-knife Caedjw Tbw Aopfx Aflsa – Very good condition – Used chipper Net price: 106,900 PLN Net price: 25,450 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: excellent (used), functionality: fully functional, WOOD SHREDDER machine model MION e MOSOLE TR 2 second hand machine machine operation in automatic and/or manual mode working condition : Excellent In automatic mode, the motor starts in the opposite direction to free the pusher from any residues from previous work. after about 5 seconds ( in fully automatic mode ) the motor stops and restarts in the correct direction for continuous processing (see the video). Codpfxow Hwpvo Afloaa technical details : hydraulic pusher lengthh rotor mm.700 rotor diameter mm.300 rotation speed of the rotor rpm 100 hopper content 3,42 m³ main motor power Hp 25 (kw 18) hydraulic power unit motor pusher Hp 1 interchangeable knives Feeding from top

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials Throughput depends heavily on the sieve and source material: - up to 60 kg / h for EPS with a 15 mm sieve *the coarser the sieve, the higher the throughput Motor 9.2 / 11 KW - 400 volts, stable steel construction, hardened cutting blades, Caedpfx Afeh S H T Uolea sieve with interchangeable inserts, optionally (8), (10), 15, 22, 26, 30, 40, or 60 mm perforation with electric drive with star-delta switch Ue protection and 8 m supply line ready to plug in, blow-out nozzle 150 mm, optionally for plastic or grain pipes, blow width approx. 12 m, chassis with 2 running wheels Ø 380 mm, and a swiveling support wheel Ø 125 mm, all Wheels with solid rubber tires, Dimensions approx. 1200 x 900 x 1270/1400 mm lxwxh Weight approx. 240 KG, Spare parts prices and options: 24 blades, hardened €9.90 each net 6 bolts €14.90 each net 1 sieve €475 each net Lid €290 each net

Condition: used, HERBOLD single-shaft shredder EWS 45/200 Cajdsw Rw U Espfx Aflsa With pressing device (pendulum arm) Working width 2000 mm Rotor diameter 450 mm Drive 2 x 90 kW Machine in very good condition, ready for operation

Condition: excellent (used), functionality: fully functional, power: 37 kW (50.31 HP), color: green, shaft length: 600 mm, Pre-shredder, chopper, shredder Manufactured by Piranha for wood and plastic Motor 37 kW Shaft length 600 mm with 3 x 5 cutting blades with 35 mm screen with control unit Csdpfx Afexruv Uslsaa

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, Untha RS Recycling Shredder Power: 2 x 11 kW Chamber dimensions: approx. 500x600mm Caedpfx Afexz Ttqjlea New blades Weight approx. 2000 kg Machine in excellent condition Perforated screen Price on request. Test runs possible. More photos and a work video available upon request.

Condition: excellent (used), CATALOG NUMBER 7770 TECHNICAL DATA - Inlet width 260mm - Inlet height 240mm - Shaft width 350mm - Shaft diameter 350mm - Number of knives 2 pcs - Sieve size 28mm - Outlet diameter 210mm - Auto-reverse - Upper track, feed system 1.1kW - Lower toothed feed roller, 2 pcs, 0.75kW Caedpfx Afoxl Dztolsa - Feed belt length 3700mm - Feed belt width 250mm - Main motor 22kW - Overall dimensions L/W/H 5400x1000x1200mm - Weight of machine and feeder 1600kg ADVANTAGES – Made in Germany – Auto-reverse – With conveyor belt – Used chipper, very good condition Net price: 38,900 PLN Net price: 9,260 EUR at exchange rate of 4.2 EUR (Prices may vary with significant fluctuations)

Condition: as good as new (ex-display), Year of construction: 2024, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net Casdpsdwktkjfx Aflea (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: new, Year of construction: 2025, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Csdped Dgw Uofx Aflsaa Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, Year of construction: 2023, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm Csdpfx Afsd E R D Ssleaa . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: new, Year of construction: 2025, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Caedpfxjd Hkqhj Aflja Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: as good as new (ex-display), Year of construction: 2023, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (15 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of knives + 995 € net (28 instead of 14) Cjdpfegmfa Asx Aflsaa - Surcharge for 4-sided segment base + € 3,750 net (prevents blocking of the pusher. Recommended for shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We are happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Cjdpfodv Eu Hex Aflsaa Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear