Used Support Ribbon Magnet for sale (15,610)

Condition: good (used), Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping -Width: 700 mm -Length: 107 mm -Height: 440 mm -Threaded holes: M24 -Bores diameter: mm -Number: 2x milling support available -Price: per piece -Weight: 235 kg/piece Predpfecn Ibgjx Abuoc

Condition: good (used), Oil filter system, oil purification system, oil transfer system, hydraulic unit, hydraulic pump, hydraulic pump, hydraulic test pump -Magnetic filter Predpfxjctvqio Abusc -for: hydraulic and other oils -electrical control -Dimensions: 820/420/H1030 mm -Weight: 70 kg

Year of construction: 2026, condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets. Extremely high degree of separation, depending on the bulk height and the starting material. Probably the most compact overband magnet on the market. The competition often uses the less powerful ferrite magnets to save costs. dimensions approx. Length: 104cm Width: 22cm Height: 28 cm (at the motor) *Without controller Surcharge for simple manual start/stop control + 495 € A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm * So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic. Pedpfx Abodubpuouerc This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site Ideal for separating nails from wood chips. Optionally also in a single-shaft shredder that is sucked off Requirements: *Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm *Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm. ----- Optional at extra charge: Cross and ascending belt demonstrators from € 7,995 net

Condition: ready for operation (used), Hofmann AB 9000 Electromagnetic ring balancing system SN:11160318 ,used, minor signs of wear, 100% functional, scope of delivery as per photos Prjdpfx Aber Nrbteujc

Condition: used, “Goudsmit SEPB080013” for Sale Manufacturer: Goudsmit Prjdpor Dtausfx Abuec Type: SEPB080013 Magnet L x W x H: 1.040 x 602 x 251mm. AA.: Ca. 1.550 mm. Belt widthness: 650 mm. (New belt)

Condition: used, MH3000S-210CV + MX6000X-110KL / MH3000S 210CV + MX6000X 110KL / MH3000S210CV + MX6000X110KL, Roth & Rau Muegge GmbH Magnetron Sputter Set, L=8m, t=1h Psdpeq S T Sbjfx Abusrc Model: MH3000S-210CV + MX6000X-110KL Condition: Used

Condition: new, functionality: fully functional, machine/vehicle number: DMPMB1520x700x228, overall weight: 1,200 kg, Year of construction: 2023, Overband plate magnet, lifting magnet - overproduction Dimensions: 1,520 x 700 x 228mm 6 threaded holes on the back Own weight: approx. 1,200KG These are sample photos Prjdsrbk T Aspfx Abuoc all prices are net prices plus 19% VAT All information without guarantee, only while stocks last! conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying customers with exactly what they really need. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find a suitable solution for your application.

Condition: ready for operation (used), AEG MS350-0000-000 Permanent Magnet AC Servo Motor, Serial Number: 93-IC-483, mounting hole spacing: 71 x 71 mm, drive shaft diameter: 14 mm, used, shows normal signs of wear, 100% functional. Psdpfji D Ey Dex Abujrc

Condition: ready for operation (used), Gould M238-Y60Y-900Y-ND permanent magnet servo motor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Podpfx Abei D H Uzeujrc

Condition: ready for operation (used), Indramat MAC093A-0-PS-2-C/110-A-1/S005 permanent magnet motor, serial number as shown in the photo, mounting hole spacing: 116 x 116 mm, drive shaft diameter: 24 mm, used, normal signs of wear, 100% functional. Podpji D Imvefx Abuorc

Condition: ready for operation (used), Indramat MAC093A-0-PS-2-C/110-B-0/S001 permanent magnet motor, serial number as shown in the photo, mounting hole spacing: 116 x 116 mm, drive shaft diameter: 24 mm, used, minor signs of wear, 100% functional. Prsdpei D Imyefx Abusc

Condition: ready for operation (used), Indramat MAC112B-0-GD-2-C/130-B-0/S005 permanent magnet synchronous motor, serial number as shown in the photo, mounting hole spacing: 152 x 152 mm, drive shaft diameter: 32 mm, used, minor signs of wear, 100% functional. NOTE: Please request the costs for packaging and shipping separately! Prodpoi D Ipxjfx Abuoc

Condition: ready for operation (used), Indramat MAC114C-0-MD-2-C/130-A-1 Permanent Magnet Motor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of supply as shown in the photos. Prodpfx Aboi D Irdeuec

Condition: ready for operation (used), Indramat MAC63C-0-MS-1-C / 95-A-0 / J1000 Permanent magnet synchronous motor, serial number: 17285. The housing has a crack near the connector, but this does not affect its functionality. Used, shows normal signs of wear, 100% functional. Scope of supply as shown in the photos. Pedpfxoi D Irto Abujrc

Condition: ready for operation (used), Indramat MDC 10.20F / MMA-0 / S06 permanent magnet DC servomotor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as per photos. Psdpfxji D Ir No Abuerc

Condition: ready for operation (used), Indramat MDD093B-F-060-N2L-110GA0 Permanent Magnet Motor, Serial No.: MDD093-08912, used, in good condition, 100% functional, scope of supply as shown in the photos. Predpfei D Iv Esx Abusc

Condition: ready for operation (used), Indramat MDD093B-F-060-N2L-110GL0 Permanent Magnet Motor, serial number: MDD093-6062, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Pjdpfx Absi D Iv Tsuerc

Condition: new, Rexroth Indramat MAC071C-0-JS-2-C/095-B-0 permanent-magnet motor, unused, 100% functional. Pedpfx Asi D Nddsbuerc

Condition: new, Rexroth MAC090C-1-GD-4-C/110-A-2/WI521LV/S013 Permanent Magnet Motor, serial number MAC090-48116, unused after manufacturer's overhaul, in open original packaging, 100% functional. Prodoi D Nf Hepfx Abusc

Condition: ready for operation (used), MAC115D-1-DS-S-F/180-B-0 Permanent Magnet Motor, mounting hole spacing: 152 x 152 mm, drive shaft diameter: 32 mm, used, normal signs of wear, 100% functional. ATTENTION: Please inquire separately about the costs for packaging and shipping! Pjdpji D Ngkofx Abuerc

Condition: ready for operation (used), Rexroth MDD071C-N-060-N2S-095GA0 3-phase permanent magnet motor, serial number: MDD071-23219, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Prjdpfx Abji D Ng Djuec

Condition: ready for operation (used), Siemens 1FT5076-0AF01-2 permanent magnet motor, serial number: E1X10106315007, used, shows significant signs of wear, 100% functional, scope of delivery as shown in the photos. Predpsi D S Daefx Abujc

Year of construction: 2024, condition: new, functionality: fully functional, Description of Use: Overband Magnetic Separator (MAGNETIC series) is applied to loose materials to automatic removal of ferrous impurities in the process of waste recycling. Apart from metal recovery the Separator has a protective function for equipment in further steps of recycling process. They are usually installed on top of transport conveyors. Belt separators are used in many fields: -scrap removal from coal and aggregate Prsdpfoh D H Rcex Abujc -wood and plastic purification -iron particles recovery from cable shredding -iron rejection from WEEE recycling process -municipal waste purification Contact us for more information

Year of construction: 2022, condition: new, machine/vehicle number: 2022022209, Aluminum angled conveyor belt with substructure Conveyor length: 1500mm flat + 4000mm rising Pitch angle in bend 45°C Discharge height: approx. 3000mm Height of the horizontal top edge 200mm PVC conveyor belt Prsdpjh Elhzofx Abuoc Conveyor belt EM 15/2 0+17 PVC green Belt width 400mm T30 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+180-5+35+70 Full-surface underlay sheet Drive: Motor approx. 0.25KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54 Incl. construction for hanging the overbelt magnetic separator in the horizontal.

Condition: used, Magnetic conveyor belt, magnetic sliding conveyor, DGS System GmbH Z-conveyor, sliding belt system, conveyor belt, magnetic belt conveyor Predpfx Absi Huzxousc Type No.: MBF 326P31.75 Item No.: 44489-10 Year of manufacture: 2017 Belt width 300 mm Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to the modular frame) Insertion length approx. 3900 mm (without the modular frame) Insertion height 210 mm Insertion width housing 370 mm Insertion width threaded inserts for adjustable feet 410 mm Insertion width at the modular frame 470 mm Conveying height – discharge height approx. 1040 mm Conveying speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 volts, 50 Hz - Continuous chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition