Used Support Ribbon Magnet for sale (14,099)

Condition: good (used), Included in delivery are: 01x depth bar, used Material color: sendzimir galvanized total length: approx. 1.020 mm Nwedpfoi Dr S Esx Abvod suitable f. depth of the bar: approx. 1.000 mm material thickness: approx. 2,40 mm clear span: approx. 880 mm U-profile dim.: 58 x 50 mm cross beam support: approx. 67 mm Weight/piece: approx. 2,870 kg General information about the article: This article is offered for pickup only. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: excellent (used), Included in delivery are: 01x depth bar, used Material color: sendzimir galvanized total length: approx. 1.010 mm depth of support: approx. 1.000 mm clear span: approx. 895 mm profile dim.: C: 75 x 45 x 18 mm Technical data of the deep bar: Nwedpfx Abjib H Hyoved Manufacturer: Jung Heinrich Type: Esmena (TFZ 18) crossbar support: approx. 55 mm Material thickness: approx. 1.50 mm Weight: 2.731 kg / pc. ----- General information about the article: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank We offer you here new shelf supports of the manufacturer META for sale. - incl. shipping Germany-wide - Manufacturer: META Type: META FIX + META CLIP Nwsdpfsgqa Iqjx Abvjd Included in delivery: 12x shelf supports, new material colour: compl. galvanized material thickness: approx. 1,24 mm total height: approx. 53,60 mm total width: approx. 18,08 mm Weight/ pcs. approx. 0,013 Kg Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x chipboard support, used Manufacturer: Mecalux Material color: orange total length: approx. 200 mm material thickness: approx. 1,5 mm for chipboard thickness: approx. 22 mm Crossbeam support: approx. 50 mm Weight: approx. 0.455 kg / pc. Remark: - The inserted chipboard serves only as a fall-through protection! - For further dimensions, please refer to the attached drawing. General information about the article: This article is offered for pickup only. A transport desired beyond that or a shipment of this item is associated with additional costs, which can be requested separately Nwodohy Nihopfx Abvjd depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Technical data for the deep bar: Manufacturer: SSI Schäfer Included in delivery: 01x depth bar, used Material color: grey total length: approx. 1.108 mm f. depth of upright: approx. 1.100 mm clear span: approx. 999 mm crossbeam support: approx. 55 mm profile dim.: CS 190 x 75 x 13 mm material thickness: approx. 2,00 mm weight / pcs.: approx. 8,020 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Nedpjnl Dmkefx Abvjwd General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: new, The scope of delivery includes: 01x stage support, new Manufacturer: SSI Schäfer design: corner connection / 90 suitable for CS Sigma profiles with a profile height of 300 mm Nodpemv Dyzsfx Abvjwd type of screw connection: internal Material color: sendzimir galvanized Technical data of the stage support: Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm

Condition: good (used), The scope of delivery includes: 01x Locking bracket, used Material color: sendzimir galvanized Total length: approx. 1,640 mm Leg "A" approx. 39 mm (flanged) Leg "B" approx. 63 mm Support surface: approx. 60 mm Leg "C" approx. 13 mm Material thickness: approx. 1.50 mm Weight / piece: approx. 2.330 kg General information about the article: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Nwjdporfx Hzsfx Abvjd depending on the place of delivery or scope of delivery.

Condition: used, This listing is for a Promega Maxwell 16 MX3030 Magnetic Particle Processor Automated DNA Extraction from up to 50mg Tissue Purifies up to 16 samples at a time Integrated grinding replaces Proteinase K treatment and manual grinding Purified DNA is ready for downstream amplifications Nsdpfx Ajxzhmrjbvswd

Condition: good (used), Year of construction: 2005, Electro milling magnet manufacturer: SAV Type:243.77-960X485 Year 2005 with control transformer. Dimensions: 960 mm x 485 mm Height 100 mm Nsdpfxswnpkbe Abvewd Weight approx. 250 kg.

Condition: good (used), Year of construction: 1984, Tiede Universal U550 GW Magnetic Electric Crack Tester Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic-electric crack tester Rated operating current I 5400 A alternating current seats resp. 3800 A alternating current effective, adjustable in 8 steps Flow rate Ø: 8000 Aw full wave direct current. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetizing coil lights Ø 800 Feedthrough Ø: 5000 Aw with alternating current adjustable in 8 steps, gemsen according to DIN 54131 Year of construction 1984 Accessories/Special equipment Electronic magnetization controls Demagnetization device Support rollers Darkening cabin Main machine dimensions Nwedpjifpg Ajfx Abved total length mm 8.000 total width mm 2.500 Total height mm 2.500 Working area remarks Nominal diameter mm ~5.500 Field of application: testing of crankshafts. Item condition: used For further technical data please refer to the machine card. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Electromagnetic clamping plate (28490) Nwodpfx Ajtrngpobvjd Length 500 mm width 250 mm height 75 mm Voltage 90 Volt 0.4 Ampere Weight 58 kg

Condition: used, functionality: fully functional, Carrying rollers Conveyor rollers Spiral rollers various sizes just enquire or visit the Jöma shop Nodpfxorq Dfgs Abvjwd for example: L 2710 x D 160 mm L 2500 x D 195 mm L 1800 x D 195 mm L 1400 x D 133 mm L 1300 x D 160 mm L 1200 x D 80 mm L 1050 x D 200 mm other sizes available on request

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Overbandmagnet for LINDNER URRACO 95. Measurements: Njdpfxjxur Ito Abvswd Total length: 270 cm, Width of the rubber belt: 110 cm

Condition: used, Roller support for saw, composed of: 2 supports: L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm 1 support fitted on machine side (see photo): L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm Rolls width: 450 mm Nedoyn Nxwepfx Abvowd

Condition: excellent (used), Rexroth Indramat MHD112C-035-PG3-BN Servomotor Manufacturer: Rexroth Nwedorklgzopfx Abvsd Model: MHD112C-035-PG3-BN 4000 min-1 Part No. 294649 IP: 65 13,3 kW 48 kg You can find more new and used motors in our store! International shipping costs on request!

Condition: used, tank capacity: 13,000 l, GENERAL Equipment: butterfly valve, spray head Design: horizontal Notes: 1 manhole approx. 300 x 395 mm in the front bottom; 3 loose bearing shells, Fe; 1 dent at the junction cylinder/front bottom (see photos) Internal diameter: 2,190 mm Total height: 2,550 mm Total length: 4,100 mm Location: Bremen Volume: 13,000 litres Product-contact material: V2A 1.4541 (AISI321) Nsdpjyckl Iofx Abvswd Condition: used Cylindrical length: 3,000 mm Last application: brewery VESSEL Support type: saddles Number of legs: 3 pcs FEATURES Outlet: DN65 DIN 11851

Condition: used, Equalising block for low-bed semi-trailer Dimensions – see photos ##### Nwsdpfx Asytyiqjbvod PLEASE CALL – NO EMAILS! #####

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1595 € 23 mm 19 mm Weldon 1.6 kW M20 266 mm 259 mm 500 mm 17 kg 23 mm 50 mm 75 mm 190 mm 160 - 250 / 390 - 580 U/min 8 mm The PRO-52T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 50mm (2”) and drilling capacity up to 23 mm (7/8”). Machine’s forward & reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel gradeor tool quality. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2-speed gearbox • Electronic Speed Stabilization System (ESSS) maintains stable speed regardless of load changes • tapping of through and blind holes • milling with TCT or HSS cutters or drilling • electronic clutch • both overload and overheat protection • rigid design extends tool life • tilt sensor stops the motor if machine breaks away • 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • innovative smart magnet with reduced weight • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base (ESB) uses only 50% of its power when motor is not running • Semi-automatic gib adjustment enables simple, fast, correct and repeatable slide backlash Settings without any expert knowledge or experience • intuitive control panel at top of the drill • large coolant container Standard shipping set: • Drilling machine • Plastic box • Handle (3 pcs) • MT2 arbor with 19 mm (3/4”)Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling hose • MT2 drift • 6 mm hex wrench • 5 mm hex wrench with a handle • 2.5 mm hex wrench • 8 mm combination wrench • Tool can Nwjdpfx Aeyrht Isbvod • Operator’s Manual OPTIONS (PRICES ON REQUEST): Pressure cooling system 2 lt Vacuumpad Compressed air ecjector Pipe attachement

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 2595 € 12 mm Nwodpfx Abeyrhtnjvjd 19 mm Weldon 0.4 kW 361 mm 238 mm 352 mm 145 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm This special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operate in remote areas, where no power supply is available. The base includes very strong neodymium magnets and does not require any electricity to operate. PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicate the current status of the drill and provide safety information. The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials. Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ah battery pack. Features and benefits: • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • tilt sensor stops the motor if machine breaks away • control panel is equipped with so called „vandal resistant” illuminated start/stop motor buttons. Standard shipping set: • Cordless Drilling Machine with coolant container • Plastic Box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Allen wrench hex s=4 with handle • Operator’s Manual OPTIONS (PRICES ON REQUEST): Battery charger Pressure cooling system Vacuumpad Vacuumpump Compressed air ejector

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1995 € 25 mm 19 mm Weldon 1.6 kW M20 266 mm 259 mm 505 mm 18 kg 25 mm 70 mm 75 mm 190 mm 120-190 / 290-450 U/min 8 mm The PRO-72T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 70 mm (2-3/4”) and drilling capacity up to 25 mm (1”). Machine’s forward & reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel grade or tool type. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2-speed gearbox • Electronic Speed Stabilization System (ESSS) maintains stable speed regardless of load changes • tapping of through and blind holes • milling with TCT or HSS cutters or drilling • electronic clutch • both overload and overheat protection • rigid design extends tool life • tilt sensor stops the motor if machine breaks away • 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • innovative smart magnet with reduced weight • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base(ESB) uses only 50% of its power when motor is not running • Semi-automatic gib adjustment enables simple, fast, correct and repeatable slide backlash settings without any expert knowledge or experience • intuitive control panel at top of the drill • large coolant container Standard shipping set: • Drilling machine • Plastic box • Handle (3 pcs) • MT3 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling hose Njdpfx Aeyrhrwebvewd • MT2 drift • 5 mm hex wrench with a handle • 4 mm hex wrench • 2.5 mm hex wrench • 8 mm combination wrench • Operator’s Manual OPTIONS (PREISE AUF ANFRAGE): Pressure cooling system Pipe adjustment

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1695 € 12 mm 19 mm Weldon 0.45 kW 316 mm 235 mm 328 mm 115 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm The PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters. The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits. Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate current condition of the drill and give safety information. Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red) Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety information • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • Tilt sensor stops the motor if machine breaks away • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base(ESB) uses only 50% of its power when motor is not running • innovative smart magnet with reduced weight Standard shipping set: • Cordless drilling machine • Plastic box • Battery 4.0 Ah • Handle (3 pcs) Nwedoyrhqtjpfx Abved • Safety strap • Cooling system • 4 mm hex wrench with a handle • Operator’s Manual OPTIONAL EQUIPMENT (PRICES ON REQUEST): Battery charger Pipe attachment Pressure cooling system Vacuum pad Vaccum pump Compressed air ejecto

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 595 € 12 mm 19 mm Weldon 0.1 kW 175 mm 250 mm 312 mm 10 kg 12 mm 36 mm 51 mm 70 mm 350 U/min The PRO-36 makes holes up to 36 mm in diameter by using annular cutters. The machine can also drill holes up to 12 mm in diameter by means of twist drill bits with Weldon shank 19mm (3/4’’). Compact design and excellent ratio weight/power make this mag drill a very popular choice for customers. Features & benefits: • Dual bars guide system ensures extraordinary stiffness and adjustment free operation • Compact size and ultra-lightweight - ideal for site work • Rugged one piece slide and gear box for extra stability • Purpose designed motor with heavy duty gear box • Maintenance-friendly design makes it easy to use • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Magnetic Power Adhesion Control (MPAC) detects adhesive force of electromagnetic base and protects both the machine and theoperator from work on too thin work piece Standard shipping set: • Magnetic Base Drilling Machine • Plastic Box • Swarf Shield/Cutter Guard • Coolant Bottle Assembly • Safety Chain with Snap Hook • Allen wrench hex s=4 • Operator’s Manual • Standard shipping weight - 16,7 kg (36 lbs OPTIONS (PRICES ON REQUEST): Coolant system 2 lt Vacuumpad Compressed air ejector Pipe attachment Nwjdeyrhqmepfx Abvjd

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 995 € 23 mm 19 mm Weldon 1.15 kW 331 mm 254 mm 456 mm 155 kg 23 mm 50 mm 50 mm 160 mm 240 / 480 U/min 6 mm PRO-50 featuring purpose designed motor and 2-speed gear box 240/480 rpm is optimized to provide appropriate speed for work with HSS cutters up to ? 45 mm and twist drills up to ? 23 mm. Rigid construction, optimized by means of FEA (finite element analysis) software extends tool life and enables depth of cut up to 75 mm. Compact design along with innovative smart magnet with reduced weight make it a lightweight machine. PRO-50 provides maximum holding power on thin materials thanks to Magnetic Field Shape Control (MFSC). The drill protects both the machine and the operator from work on too thin work piece by means of Magnetic Power Adhesion Control (MPAC). PRO-50 is also equipped with Energy Saving Base (ESB) that uses only 50% of its power when motor is not running. Features and benefits: • Compact design with excellent ratio weight/power • Purpose designed motor • Motor Speeds 240/480 rpm (under load) • Spindle equipped with MT2 • Innovative smart magnet with reduced weight • Rigid design to extend tool life • Large stroke enables the use of long tools • Motor cable with additional protective cover • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Magnetic Power Adhesion Control (MPAC) detects adhesive force of electromagnetic base and protects both the machine and the operator from work on too thin work piece • Energy Saving Base (ESB) uses only 50% of its power when motor is not running Standard shipping set: • Drilling machine • Plastic box • Handle (3pcs) • MT2 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling system hose • MT2 drift • 2.5 mm hex wrench • 5 mm hex wrench • 5 mm hex wrench with a handle • 8 mm combination wrench • Operator’s manual OPTIONS (PRICES ON REQUEST): Pipe adjustment Pressure cooling system Nwsdoyrhp Nspfx Abvjd Vacuumpad Vackuumpump Compressed air ejector

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1055 € 12 mm 19 mm Weldon 1.1 kW 400 mm 126 mm 185 mm 10 kg 12 mm 40 mm 40 mm 45 mm 370 U/min 6 mm PRO-40 AD is a low profile mag drill, that fits in the tightest of spots. Perfect solution for any applications in confined spaces, wheretypical mag drills are too large. Its powerful motor enables drilling of holes up to 40 mm (1-9/16”) in diameter and up to 40 mm (1-9/16”) deep. An innovativeultra-strong magnetic base with high performance on air gaps makes it possible to work even on painted, rusted or thin surfaces. Magnetic Power Adhesion Control (MPAC) protects both the drill and the operator from working on too thin or inadequate surfaces, preventing the motor from engaging if the adhesive force is dangerously low. PRO-40 AD accepts both TCT and HSS cutters as well as twist drill drills with 19,05 mm (3/4”) Weldon shank. Features&benefits: • Low profile mag drill of 185 mm height only • Ultra-strong magnetic base with 1009 kgf (9900 N) holding force • Compact and lightweight design of just 10 kg Nwodpfoyrhp Asx Abvsd • Milling capacity up to 40 mm with annular cutters • Accepts also twist drills with 19,05 mm (3/4”) Weldon shank • Extended stroke of 45 mm allows up to 40mm depth of cut • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Integrated swarf guard • Detachable feed lever (feat. ratchet) can be fixed from either side • Lifting handle for easy transportation • Cooling with a bottle Standard set includes: • Drilling machine • Plastic box • Handle • Pilot pin 6.34 x 102 mm for HSS cutters • Pilot pin 7.98 x 103 mm for TCT cutters • Safety strap • Hex wrench 4 mm • Operator’s Manual OPTIONS (PRICES ON REQUEST): Cutter extension Coolant bottle with nozzle 250ml

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm Nwodpoyrhppofx Abvod 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual