Used Support Ribbon Magnet for sale (15,583)

Condition: ready for operation (used), Indramat MDD093B-F-060-N2L-110GA0 Permanent Magnet Motor, Serial No.: MDD093-08912, used, in good condition, 100% functional, scope of supply as shown in the photos. Crsdpfx Aji D Iv Eeb Deg

Condition: ready for operation (used), Indramat MDD093B-F-060-N2L-110GL0 Permanent Magnet Motor, serial number: MDD093-6062, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Crsdoi D Iv Tjpfx Ab Dsg

Condition: new, Rexroth Indramat MAC071C-0-JS-2-C/095-B-0 permanent-magnet motor, unused, 100% functional. Crodpfx Absi D Ndds Dsg

Condition: new, Rexroth MAC090C-1-GD-4-C/110-A-2/WI521LV/S013 Permanent Magnet Motor, serial number MAC090-48116, unused after manufacturer's overhaul, in open original packaging, 100% functional. Credpfxoi D Nf Hj Ab Djg

Condition: ready for operation (used), MAC115D-1-DS-S-F/180-B-0 Permanent Magnet Motor, mounting hole spacing: 152 x 152 mm, drive shaft diameter: 32 mm, used, normal signs of wear, 100% functional. ATTENTION: Please inquire separately about the costs for packaging and shipping! Crodpfx Asi D Ngkjb Dsg

Condition: ready for operation (used), Rexroth MDD071C-N-060-N2S-095GA0 3-phase permanent magnet motor, serial number: MDD071-23219, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Crjdpfx Asi D Ng Deb Dsg

Condition: ready for operation (used), Siemens 1FT5076-0AF01-2 permanent magnet motor, serial number: E1X10106315007, used, shows significant signs of wear, 100% functional, scope of delivery as shown in the photos. Cedpfx Abji D S Das Derg

Condition: used, “Goudsmit SEPB080013” for Sale Crsdpor Dtauofx Ab Deg Manufacturer: Goudsmit Type: SEPB080013 Magnet L x W x H: 1.040 x 602 x 251mm. AA.: Ca. 1.550 mm. Belt widthness: 650 mm. (New belt)

Condition: ready for operation (used), Hofmann AB 9000 Electromagnetic ring balancing system SN:11160318 ,used, minor signs of wear, 100% functional, scope of delivery as per photos Crjdpfx Aor Nrbtsb Deg

Condition: new, Bauer & Böcker 1000V magnetic lifting device, 1800g lifting force, 18mm head diameter, 540mm overall length, 120mm handle length, unused, 100% functional, scope of delivery as shown in the photos. Crodpfxokk A Ucs Ab Dog

Condition: used, used, refurbished, 24V-magnetic chucks (flat and sinetable) with and w/o water-cooling in dimensions - 400 x 150 mm - 500 x 200 mm - 600 x 250 mm new wire and plug Crjdpec Szv Defx Ab Dsg subject to prior sale

Condition: excellent (used), Rexroth Indramat MHD112C-035-PG3-BN Servomotor Manufacturer: Rexroth Model: MHD112C-035-PG3-BN Cjdjrklgzopfx Ab Dsrg 4000 min-1 Part No. 294649 IP: 65 13,3 kW 48 kg You can find more new and used motors in our store! International shipping costs on request!

Condition: new, functionality: fully functional, machine/vehicle number: DMPMB1520x700x228, overall weight: 1,200 kg, Year of construction: 2023, Overband plate magnet, lifting magnet - overproduction Dimensions: 1,520 x 700 x 228mm 6 threaded holes on the back Own weight: approx. 1,200KG These are sample photos all prices are net prices plus 19% VAT All information without guarantee, only while stocks last! conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying customers with exactly what they really need. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Crjdpferbk T Ajx Ab Dog Please feel free to contact us by phone to find a suitable solution for your application.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, power: 4 kW (5.44 HP), overall weight: 81 kg, total length: 590 mm, total width: 440 mm, total height: 360 mm, 2 magnetically coupled centrifugal pumps made of stainless steel. Crjdpfx Aewncv Reb Dsg ! Price per unit ! Last used for pumping caustic soda. Manufacturer: CP Pumpen AG (Switzerland) Type: MKP 20-15-160 Design: Monobloc with base plate Delivery rate: 5 m³/h (1.38 liters/second) Delivery head / Pressure: 21.1 meters (2.1 bar) Medium temperature: 35 - 40 °C Impeller Ø 153 mm Speed: 2950 rpm Material (casing and impeller): 1.4581 Includes bolts and plug for connecting cable Motor: Siemens Type: 1LE10011BA222FA4 Power: 4 kW Voltage: 400 Volt Efficiency: IE2 Dimensions: Length: 590 mm Width with temperature sensor: 440 mm Base plate width: 330 mm Height: 360 mm Weight: 81 kg Inlet: DN 20 Outlet: DN 15 ! Price per unit !

Condition: used, This listing is for 1 of 2 Stuart Scientific SM1 Magnetic Stirrer. Cedpjxv Dhuefx Ab Djrg The unit is in full working condition and is ready for immediate release. Dimensions: 180 / 280 / 90 Weight: 1.8

Condition: used, This listing is for the Hanna HI190M Magnetic Stirrer The unit is in full working condition and is ready for immediate use The Hanna HI190M is a compact and durable magnetic stirrer designed for efficient mixing in constrained lab spaces. Key Features Compact & Lightweight Design The device measures approximately 120 × 120 × 45 mm (4.8 × 4.8 × 1.8 in) and weighs between 610 g (12 V DC version) and 640 g (115 V version) Its small footprint helps free up valuable bench space Speedsafe™ Safety Mechanism This smart system prevents dangerous overspeed when the stir bar is suddenly removed, using an opto-sensor and a frequency-voltage converter to monitor and limit speed Adjustable Speed Range Offers stirring speeds from 100 to 1000 RPM, providing precise control over mixing Durable Housing Csdpfxoxv Dvxj Ab Djrg The ABS plastic casing resists many chemical spills, enhancing longevity and safety Power Indicator LED A handy LED lets you know at a glance that the unit is powered on and operating Fuse & Grounding Protection The 115 V and 230 V versions include a replaceable fuse for short-circuit protection, and the case is grounded for additional safety

Condition: excellent (used), Made of heavy cast iron – high rigidity and durability. Working opening approx. 120 mm (measured with a caliper). Adjustable pins with roller ends. Mounting through holes in the base – secure and stable installation. Very good condition, fully functional and ready for use. Ideally suited for machining shafts, tubes, rods, and other workpieces requiring support during turning. Codpfx Ajw Sfptob Dsrg

Condition: used, length 500 mm width 500 mm height 110 mm Codpfxsyqv Nno Ab Dsrg base area . mm total power requirement . kW weight of the machine ca. . kg dimensions of the machine ca. . m Magnetic clamping plate electric with cable The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team

Condition: used, 10-position digital magnetic stirrer without heating, designed for synchronous stirring. The magnetic coil technology provides noiseless and consistent stirring on all positions. Speed remains constant, even when load changes Specification: Stirring speed: up to 1200rpm Stirring capacity: 400ml per position Dimensions – 19 x 57 x 6cm (w x d x h) approx Weight – 5kg Crjdpfxeylwcxj Ab Dsg Good working condition. Please check out our other listings as well.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard Csdpfxoyrhppj Ab Djrg • 4 mm hex wrench • Operator’s Manual

Condition: good (used), Year of construction: 2005, Electro milling magnet manufacturer: SAV Type:243.77-960X485 Year 2005 with control transformer. Dimensions: 960 mm x 485 mm Height 100 mm Crjdpfx Abewnpkbs Djg Weight approx. 250 kg.

Year of construction: 2026, condition: new, Robust Steel Construction – Designed for Continuous Operation The basic structure consists of a stable construction steel frame, manufactured from laser-cut, bent, and welded components. The surface features a high-quality RAL0208 powder coating. Modular Design: Our conveyor belt frames are available as transportable sections. This makes the system: • Easy to transport and assemble • Extendable or shortenable at any time • Ideal for future modifications or system adaptations Conveyor Technology & Carrying Rollers The carrying roller construction in the lower run is designed for smooth and reliable operation: • Shaft diameter: 60/15 mm • Roller station spacing: approx. 500 mm (customizable) • Closer roller spacing in the infeed area available on request for higher load capacity Drive & Rollers The drive drum and return drum are made of S235 steel, welded and precisely machined: • Ø 220 × 700 mm, crowned and finish-turned • Shaft secured with tension bearings • Bearing positions with robust UCF flange bearings, including lubrication nipples Drive Unit: • Hydromec worm gear motor, 1.1 kW • Belt speed: approx. 1.15 m/s • Connection: 400V / 50 Hz, protection class IP54 • Drive supplied ready for wiring to motor terminal box (commissioning must be carried out by a qualified electrician) • Motor mounted on the right, pull configuration in the conveying direction Conveyor Belt A durable, industrial-grade belt is used: • DM EP250/2, 3+1.5 cover • Chevron profile 17 mm high, 650 mm wide • Profile-free splice area • Endless hot vulcanized Custom Options & Accessories (depending on requirements) The modular design allows all components to be precisely adapted to your process, such as: Credpeyhznnsfx Ab Dog ✅ Special lengths & widths ✅ Side plates / wave edges (for lateral guidance and increased conveying stability) ✅ Infeed plates / feed plates (wear-optimized, material-friendly) ✅ Feed/infeed hoppers (for clean loading of bulk material) ✅ Discharge plates / discharge chutes ✅ Cleat profiles / alternative belt specifications ✅ Adjustment of roller spacing & carrying roller geometry ✅ Special coatings / custom designs

Condition: new, Year of construction: 2026, The magnetic separator is an industrial device designed for continuous purification of coolants and oil-based fluids from ferromagnetic particles generated during machining processes. In closed-loop systems, it effectively removes metal chips and fine particles from the working medium, stabilizing cooling and lubrication parameters while reducing wear on pumps and installation components. Magnetic coolant separator – key benefits in maintaining clean machining fluids In production environments, coolant operating in a closed circulation system is constantly exposed to metallic contamination. Ferromagnetic particles act as an abrasive material – accelerating pump wear, causing deposits in channels and nozzles, and reducing the stability of the lubricating film. As a result, the risk of surface scratches increases, machining quality decreases, and downtime related to filtration and coolant replacement becomes more frequent. A magnetic separator for machining fluids solves this problem by automatically and continuously capturing metal particles without interrupting the production process. This allows the working medium to maintain consistent operating parameters, while the cooling system remains stable even under intensive working conditions. What do you gain by implementing a magnetic separator in a coolant system? Continuous coolant cleanliness – without the need to stop production. Protection of pumps and circulation components by reducing abrasive particle contamination. More stable machining quality (fewer scratches and improved process repeatability). Extended coolant service life and reduced disposal costs. Lower failure rates and reduced maintenance costs of filtration systems. Improved waste management – automatic removal of collected chips outside the working area. Why is magnetic separation more effective for removing ferromagnetic particles? Unlike traditional mechanical filters, which require periodic cleaning and may experience reduced flow due to filter clogging, magnetic separation operates continuously with minimal maintenance requirements. A magnetic coolant separator removes ferromagnetic particles consistently, maintaining stable fluid flow and high machine availability. Cjdpjycc Rpsfx Ab Dsrg Design and operating technology The device has been designed to mechanically and continuously separate metallic contaminants from process fluids. The main working element is a stainless-steel magnetic drum, which rotates and attracts ferromagnetic particles from the flowing coolant. The collected contaminants are then removed and transported outside the working area. The removal of collected particles is carried out by a shaft system: Magnetic shaft – responsible for capturing and holding metal particles during the separation process. Rubber-coated pressure shaft – stabilizes the removal of contaminants and assists in directing them into the waste container. Standard equipment Magnetic separator with stainless-steel magnetic drum Rubber-coated pressure shaft Working tank Electric drive Technical specifications Parameter Value Width of rubber-coated pressure shaft 140 mm Diameter of rubber-coated pressure shaft 65 mm Width of magnetic shaft 140 mm Diameter of magnetic shaft 110 mm Inlet connection 50 mm Outlet diameter 53 mm Motor power 0.25 kW Capacity up to 25 l/min Weight 35 kg

Year of construction: 2006, condition: used, functionality: fully functional, machine/vehicle number: 11176, We are offering this used CemeCon CC 800/9 HIPIMS Magnetron Sputtering PVD System, year of manufacture 2006. Manufacturer: CemeCon Model: CC 800/9 Serial number: 11176 Year of manufacture: 2006, upgraded in 2013 and 2025 Weight: 3,000 kg Protection rating: IP 20 Power rating: 166 kVA Evaporators: 6 Voltage: 3x400/N/PE V Frequency: 50/60 Hz Cemecon CC800/9 HIPIMS - 6 cathodes - All cathodes DC, 2 also HIPIMS capable - Booster anodes - 4 gases, 1 of which is flammable Crjdpsx Tt T Rjfx Ab Dsg - BIAS: DC, MF-pulsed, or HIPIMS - 3x heating - 2 turbo pumps - 6-position substrate holder - Multiple targets - Includes option for BNC terminal for Peak I, U, and P at HIPIMS cathodes + BIAS - Extensive accessories such as loading material, spare parts, consumables - In 07/2023, the system control was upgraded to the latest standards and a manufacturer service was performed. A bundle option is also available including a chiller, a precision substrate cleaning system, and a lapping/polishing machine. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Lintmenger ribbon blender Manufacturer: Morton Capacity: 500 liters Crjdpfxoxnkk Hj Ab Djg Motor power: 7.5 kW, 49 rpm Material: Steel See our other advertisements VMA Wekerom