Used Surface Plate for sale (19,832)

Year of construction: 1984, condition: good (used), burnt hydraulic guillotine shear, make LVD, type MVN 25 / 4, year 1984 power 2500 x 4 mm Iisdpfxjihppxj Ag Nsh with backgauge with documentation Other accessories: - Conveyor table - Lifting table

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm -Table height: 925 mm Iiedjxm Sagspfx Ag Njh -Plate thickness: 115 mm -Vice: clamping jaws: 150 x 30 mm clamping width 250 mm -Transport dimensions: 2480/1000/H1110 mm -Weight: 1850 kg

Condition: new, Year of construction: 2019, sheet width 2050 mm plate thickness 2 mm strokes per minute until 38 cutting angle 1,75 ° table height over floor 870 mm total power requirement 3 kW weight of the machine ca. 1520 kg range L-W-H 2,2 x 0,6 x 1,2 m Iijdpfxovn Al He Ag Nsh Demo machine at a special price: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille. Plus freight + packaging 270,--. This is a demonstration machine at a special price, so we are selling it without any warranty. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: good (used), functionality: fully functional, Asymmetric 3-roll bending machine Plate roll-flanging machine BOMBLED - Model: 317 S Year: 1971 Maximum rolling thickness: 4 mm Maximum working length: 2050 mm Maximum flanging thickness: 3 mm Roll diameter: 153 mm Control: motorized Motor: 3 kW / 4 HP Isdpfx Agoxn Tgwj Nsih Approximate weight: 2100 kg Dimensions: 3100x1100x1400 mm

Condition: used, functionality: fully functional, Year of construction: 2000, Equipment: CE marking, angle stop, emergency stop, finger protection, foot remote control, safety light barrier, Hydraulic Shear Brand: DURMA Type: DHGM3020 Iedpexn Rhrjfx Ag Noih Sheet Length: 3000 mm Steel Thickness 37: 20 mm Voltage: 3x380V-50 Hz Length: 4450 mm Width: 3850 mm Height: 2450 mm Weight: 20,000 kg

Condition: good (used), Year of construction: 2009, sheet width 3050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 18 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Control SP 8 total power requirement 7.5 kW weight of the machine ca. 4800 kg. range L-W-H 3650 x 2100 x 1750 mm very little use (!!) from a maintenance workshop Features - Guide-railed electro-hydraulic guillotine shear - HACO control model NC SP 8 Isdsxmakgepfx Ag Njih * Easy operation directly at the cutting table * Adjustment of cutting angle + backgauge * Retraction function from rear stop * Electric cutting length limitation * Emergency stop button, locking - Motor-adjustable and programmable rear stop - Electric/hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front - 1x side stop - 1,000 mm, with scale & T-slot - Front finger guard - 1x freely movable foot switch - Rear safety guard + sheet metal chute - Operating instructions (PDF)

Condition: good (used), Year of construction: 1992, Used guillotine shear, Helmut Lotze, type 205.3000x16, built in 1992 Working width: 3040 mm Max. sheet thickness: 16 mm Column width: 3040 mm Thrust: 200 mm Stop width: 1000 mm Motor power: 45 kW Iijdewaynbspfx Ag Noh Stroke rate: 22/min.

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1200 mm -Table height: 735 mm -Plate thickness: 125 mm -Transport dimensions: 2000/1400/H735 mm Ijdpfx Agjxm R S Us Nsih -Weight: 2220 kg

Condition: new, sheet width 2050 mm plate thickness 3 mm strokes per minute until 35 cutting angle 2,0 ° table height over floor 870 mm thickness at "Niro-steel" 2 mm total power requirement 4 kW weight of the machine ca. 1550 kg range L-W-H 2,5 x 1,57 x 1,21 m The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Iijdpfx Agsvdfmxs Neh Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 1994, Bäuerle surface planer Type: AS 510 Year: 1994 Cutter block: 3 knives Centrofix Planing width: 510 mm Motor power: 5.5 kW Auxiliary fence Fried cutter guard Control panel on top Digital display Infeed table: 1630 mm Outfeed table: 1220 mm Location: ex-stock 54634 Bitburg - immediately available - Ijdpfxexgbw Ij Ag Nsih

Condition: used, This listing is for the Biotek ELx808 Plate reader Iisdoxhftvopfx Ag Njh The unit is in full working condition and is ready for immediate use The BioTek ELx808 is a multi-channel absorbance microplate reader designed for high-precision optical density measurements in 96-well format microplates. Functioning essentially as a microplate-format spectrophotometer, the ELx808 measures light intensity as a function of wavelength—allowing for precise quantification in applications such as ELISA, endotoxin testing, enzyme kinetics, and microbial growth. This model is suitable for both research and development as well as diagnostic use, and is frequently employed across multiple disciplines including biology, chemistry, and nanotechnology. However, unlike some other microplate readers on the market, the ELx808 is specifically engineered for 96-well plates only and does not accommodate a broad range of labware.

Condition: used, Year of construction: 2017, grinding range 600 x 300 x 400 mm magnetic plate size 600 x 300 mm distance spindle center to table 5500 mm max. table load 250 kg grinding wheel speeds 1.900 U/min longitudinal feed 680 mm cross travel 245 mm control STÖCKEL - ST-2 Surface Grinding Machine | STÖCKEL - FX 6030 ST-2 The machine is in good condition. A machine video will be shared on request. Iijdpfju Rt Tqex Ag Neh Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FX6030 | FX-6030 | FX6030ST | FX 6030 ST

Condition: good (used), Year of construction: 1975, Manufacturer: Sagita – Beyeler License Iodpfx Agjw Ecwcj Nsih Model: 2550 × 10 (Sheet length × Cutting thickness) Cutting length: approx. 2520 mm (effective) Max. cutting thickness (steel): ~10 mm Backgauge: approx. 750 mm, motorized adjustment Blade gap adjustment: manually adjustable Space requirements: with table supports: 3,200 × 2,800 × 1,600 mm transport-ready: 3,200 × 2,150 × 1,600 mm Weight: approx. 6,300 kg

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: clamping plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 630 x 500 mm -Inner diameter: 180 mm -Plate height: 75 mm -Groove width: 19 mm -Dimensions: see drawing in the photos -Dimensions total: 630/500/H75 mm -Weight: 162 kg Iodpoxm R Ipsfx Ag Noih

Condition: new, Year of construction: 2025, TBS - Manual plate shears Manual plate shears Suitable for cutting mild steel, aluminium, copper, zinc, plastics High quality cutting blades made of steel with a hardness of HRC55-60 Equipped with two operating handles With front support surface with scale and adjustable back gauge 800 mm table height Scope of delivery: Iiodpfx Agscnxc Rs Njh 2 operating handles Model TBS 2000-12 Article no. 3746020 Technical data working width max. 2000 mm sheet thickness max. - material tensile strength 400N/qmm 1,25 mm backgauge range 0-300 mm weight 511 kg Dimension in mm 2450 x 1100 x 1050 mm

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: clamping plate with T-slots for hydraulic press, eccentric press -Clamping surface: 705 x 484 mm -Inner diameter: 250/220 mm -Plate height: 65 mm -Groove width: 22 mm -Dimensions: see drawing in the photos -Dimensions total: 705/484/H65 mm -Weight: 147 kg Iodpstnlz Hsfx Ag Nsih

Year of construction: 2025, condition: new, NEW - - Ideal for removing plates from your standing plate storage. - For in-plant transport of the plates to the standing or lying panel dividing saw. - The steplessly height-adjustable support surface can be exactly to the height of your panel saw. height of your panel saw. - Panels weighing up to max. 250 kg can be transported or transported or swiveled by one operator alone. Technical data: Support height - standing: approx. 120 - 340 mm - lying: approx. 890 - 1200 mm max. plate size: 5200 × 2100 mm load capacity: 250 kg Location: ex stock 54634 Bitburg - immediately available- Iedpfx Ajd Tyaaog Njih Will be shipped for 90,- Euro net within Germany

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: with support ribs, on a solid base frame -Clamping surface: 800 x 800 mm -Table height: 930 mm -Plate thickness: 25 mm -Transport dimensions: 800/800/H930 mm Ijdpjwclciofx Ag Neih -Weight: 235 kg

Condition: as good as new (ex-display), Year of construction: 2025, Planer-thicknesser Holzkraft FS 30 Classic Tersa with Tersa cutterblock and planing knives - quick change system Tersa planing knife system enables knife change in seconds and particularly quiet operation Skew toothed steel infeed roller for constant and uniform wood infeed Extra long planing tables Large dressing fence can remain in position when opening the dressing tables. Rear opening dressing tables High machine weight Iedpfxebuldys Ag Noih Powerful industrial motor Robust cast steel construction Total length of the tables: 1510 mm Feed table length / table height: 740 mm / 850 mm working width: 300 mm max. chip removal: 4 mm dimensions thicknessing table: 565 * 300 mm min./max. working height: 3/230 mm feed speed: 7m/min planer shaft diameter / planer knives: 72mm / 3 pcs. speed: 5200 rpm motor 400V/50Hz/S6 - 40%: 4,0kw (5,5PS) Suction nozzle diameter: 2 * 120 mm Scope of delivery: Tersa planer cutterhead Anodized planing fence Available ex stock Bitburg - immediately available-

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Isdpfx Aopgkmwjg Njih Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Iijdepq If Dspfx Ag Njh Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Large dressing tables made of grey cast iron The dressing table is adjusted via a precise parallelogram system so that the distance between the table tips and the cutter head remains the same in every adjustment position The large, stable dressing fence made of anodised aluminium is easy to move and can be tilted from 0° - 45 The inclination of the fence can be read from the workstation With auxiliary stop as standard Large four-blade shaft, precision bearing Smooth running due to precision unit and thanks to the heavy cast iron design Powerful industrial engine Highest possible user safety with simplest operation Display for chip removal via scale Manual table adjustment Motor protection switch Equipment details incl. fold-down auxiliary stop for narrow workpieces Manual quick adjustment of the chip removal with scale & clamping head The protection device The safety guard is foldable and designed to protect the operator without obstructing the work Models TERSA with Tersa planer knife shaft system No more adjusting and screwing Planer knife change in seconds Self locking Especially low noise Perfect planing result Dimensions and weights Length approx. 2750 mm width/depth approx. 1500 mm Weight approx. 680 kg Dresser Total length of the tables 2720 mm Feed table length 1498 mm Chip removal max. 8 mm Stop length 1200 mm Stop height 190 mm Swivel range of dressing stop 90 - 45 ° Iiedpfeff Efcex Ag Noh Dust extraction connection Suction nozzle diameter Thickness

Condition: good (used), Year of construction: 2005, Marking and surface plate 1000 x 1000 with base frame Iiodpfx Aewqx Axeg Neh Location: from stock 54634 Bitburg - available immediately -

Condition: excellent (used), Year of construction: 1995, Schroeder HS 2000/1.0 Manual Guillotine Shear Iodpowhf Ntsfx Ag Njih Specifications: Manufacturer: Schröder Model: HS 2000/1.0 Year of Manufacture: 1995 Working Length: 2000 mm Cutting Thickness: 1.25 mm Collecting Tray Rear Paralleling Device via Handwheel Location: Arrives at Warehouse 54634 Bitburg - Available at Short Notice -

Condition: new, Year of construction: 2025, CASADEI PFS 520 - Surface planer with 520 mm planing width and motorized thicknessing table adjustment Sturdy cast iron construction Iedpfx Aobxz S Hog Noih Large, ribbed planing tables made of grey cast iron, annealed against distortion Smooth running due to high dead weight Four feed speeds Motorized thicknessing table stroke with two speeds and digital display Link pressure shoes in the infeed 4-blade shaft, precision bearing mounted Sharp toothed steel feed roller for particularly even and gentle wood feed Extraction roller with rubber coating Large dressing fence, inclinable 90°- 45° readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa planing cutter Change of planing knives in seconds When starting the machine, the planing knives are automatically clamped by the centrifugal force - self-locking The knife protrusion adjusts automatically without adjustment and screwing The planing table is adjusted by a stable and precisely guided parallelogram system, so that the distance of the table tips to the cutter head remains the same in every adjustment position. The sturdy aluminium dressing fence is anodised as standard, easily adjustable and offers a large contact surface. The adjustable inclination from 90° to 45° is easy to read from the workstation. Standard with auxiliary fence for safe planing even of narrow workpieces Fig. with optional equipment The connection position of the suction i