Used Surface Plate for sale (18,189)

Condition: good (used), Year of construction: 2005, Marking and surface plate 1000 x 1000 with base frame Location: from stock 54634 Bitburg Chsdpfxswqx Axo Ab Deb - available immediately -

Condition: used, Hard stone plate, granite plate, granite block, measuring cube Hard stone block, angle block, precisely machined on all sides The granite plate comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Cedsh Uhq Dopfx Ab Dohb Dimensions of the small table surface L x W x H: 1350 x 300 x 245 mm Working height approx. 700 mm - 5 support blocks with leveling screws, approx. 400 mm - 8 threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushings M16 - small chip on one plate edge Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of the measuring plate: 1500 kg Weight of the granite feet: 100 kg Very good condition

Condition: good (used), HARTGESTEIN measuring and control plate Csdpfxjzati Rs Ab Dohb DIN 876/1 with substructure Dimensions: Length: 800 mm Width: 600 mm Thickness: 120 mm Height with substructure: 890 mm Accuracy: DIN 876/1

Condition: good (used), Permanent circular magnet with star-pole arrangement Technical data: Diameter: 350 mm Central through-hole diameter: 40 mm Features: Chedpfxozrgy So Ab Dob Flange with Camlock fitting, size 6, diameter: 315 mm Condition: good, technically inspected

Condition: good (used), functionality: fully functional, fuel type: gasoline, overall weight: 90 kg, operation weight: 86 kg, Year of construction: 2016, machine/vehicle number: 10592837, - Working speed 27 m/min Chodpfx Ajvuma Uob Dsb - Centrifugal force: 15 kN - Excellent maneuverability and stability when operating from the side thanks to additional grip points on the protective frame - Guide bar can be swiveled forward. This enables the vibrating plate to be pulled on a slope, for example - Central attachment of the guide bar: the plate can be turned quickly and effortlessly

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 40 h, Guillotine shear with a maximum of 40 operating hours, Cutting capacity: 3.5 mm sheet thickness, tensile strength 200 N, Cutting capacity: 2.5 mm sheet thickness, tensile strength 400 N, Cutting capacity: 1.65 mm sheet thickness, tensile strength 600 N (V2A), Used only for 1.5 mm coated sheets, Hold-down opening: 25 mm (can be reset to factory spec), Strokes per minute: 56, Light barrier, Cutting angle: 2.4°, Chedsxal Uwopfx Ab Dob Upper blade has a 60° pointed grind for use with plastic-coated sheets. The upper blade is non-reversible. Rated power: 4.0 kVA Weight: 860 kg.

Year of construction: 1977, condition: used, machine/vehicle number: IntNr231519, A used Jung HF 40 surface grinding machine, manufactured in 1977, is offered for sale. This is a robust, heavy-duty model. Technical data: Type: Hydraulic Table size: 400 x 150 mm Grinding length: 400 mm Grinding width: 150 mm Chjdjzx Rrxopfx Ab Dob Grinding wheel diameter: 200 mm Grinding wheel width: 16 mm Spindle speed: approx. 2,800 rpm Table speed: infinitely variable from 2 to 20 m/min Automatic vertical feed: 0.002–0.013 mm Machine weight: approx. 900 kg Machine dimensions: approx. 1,300 x 1,200 x 1,500 mm The machine can be inspected under power by appointment. Subject to prior sale and changes or errors in the technical data and information.

Condition: new, Year of construction: 2026, High-quality design The drive roller is crowned (this ensures that the sanding belt centers itself automatically on the roller) and is fully vulcanized for maximum service life and smooth operation. Tool-free and therefore faster, simpler replacement of the sanding belt. Stepless height adjustment for optimal adjustment of the belt sander to the user. Freely adjustable metal stop for optimal and safe guidance of workpieces when using the large flat sanding area. Belt speed is designed for optimal performance, largely preventing the workpiece from burning during processing. Models with dust extraction are equipped with robust and flexible extraction hoses. Motor protection switch with CEE coupling socket including phase inverter. 5-year warranty on the motor. 1-year warranty on the belt sander. Chjdpfx Absbb R N Is Djb Belt length: 2000 mm Belt width: 75 mm Flat sanding area: 600 mm Belt speed: 15/30 m/s Color: RAL 9007 Motor, three-phase 400 V: 3.0/3.75 kW Extraction capacity: approx. 630 m³/h Extraction motor: 0.37 kW Machine dimensions (W x D x H): 1100 x 550 x 1035 mm Machine dimensions (with dust extractor) (W x D x H): 800 x 600 x 1450 mm Weight: 105 kg DELIVERY: FREE TO YOUR DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Table design: -High performance -Belt sanding unit with adjustable height from 0-90° -Maximum usable surface area for surface sanding -Belt adjustment with fine adjustment Combined belt/disc sanding machine -Longitudinal guide for material guidance -Perfectly balanced and with low vibration Chedjhhiaaopfx Ab Dob -Connection on both sides for dust extraction, Ø 50 mm -Motor protection switch with undervoltage release -Fixed stop -1 sanding belt standard (brown), grit 80 -1 sanding disc 250 x 40 x 51 mm, grit 80 -Spark arrester -Connection cable with CEE plug Additional cost for special equipment/option: - Machine stand, emergency stop button, brake and dust extraction / €2,260 (item 330.370) - Machine stand, emergency stop button and brake / €1,030 (item 330.365) - Machine stand with water immersion container / €360 DELIVERY: FREE TO YOUR DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, - belt length: 2000 mm Cedsp R N N Iopfx Ab Dshb - belt width: 75 mm - surface grinding area: 600 mm - belt speed: 15/30 m/s - colour: RAL 9007 - belt motor: 400 V 3,0/3,75 kW - suction capacity: ca. 630 m³/h - suction motor: 0,37 kW - dimensions LxWxH: 1100 x 550 x 1035 mm - weight: 105 kg

Condition: new, Year of construction: 2025, - belt length: 2000 mm - belt width: 75 mm - surface grinding area: 600 mm Cjdpfx Aboxwph Ae Dohb - belt speed: 30 m/s - colour: RAL 9007 - belt motor: 400 V 3,75 kW - suction capacity: ca. 630 m³/h - suction motor: 0,37 kW - dimensions LxWxH: 1100 x 550 x 1035 mm - weight: 105 kg

Condition: good (used), Year of construction: 1984, 2-knife cutterblock; foldable Aigner fence for narrow strips; concave/convex adjustment; planing width 410 mm; planing table length 2770 mm; extraction port Ø 160 mm; motor power 3 kW / 4.1 HP Codpfxoxy Rrnj Ab Djhb

Condition: used, Year of construction: 2006, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: PLT FL2-S-31, Horizontal Plate Freezer Samifi PLATEMATIC FL2-S-31 – 31 Freezing Stations / 450 kW Used industrial horizontal plate freezer Samifi PLATEMATIC FL2-S-31, manufactured in 2006, with 31 freezing stations and a cooling capacity of 450 kW. The system was reliably used for many years to freeze packaged convenience products and is therefore particularly interesting for industrial food production. The plate freezer was in production for a total of 15 years – 6 years in a 5-day/2-shift operation and another 9 years in a 5-day/3-shift operation. The electrical equipment is functional. The refrigeration system has already been decommissioned. Technical data: Manufacturer: Samifi Model: PLATEMATIC FL2-S-31 Type: Horizontal plate freezer Year of manufacture: 2006 Condition: Used Number of freezing stations: 31 Net freezing area per plate: 2,050 × 3,982 mm Refrigerant: NH₃ (ammonia) Cooling capacity: 450 kW Electrical connection: 400 V / 50 Hz Hydraulic unit: Double-vane pump, 15 kW Electrical condition: Functional Refrigeration system: Already shut down Application area: Chodpfxozxf D As Ab Djb The machine was specifically used for freezing packaged convenience products and is therefore ideally suited for industrial applications in food production. With its 31 freezing stations and generous plate dimensions, the system offers a high freezing capacity and is particularly interesting for production companies looking for a robust and proven deep-freezing solution. Sale: The used Samifi PLATEMATIC FL2-S-31 plate freezer is sold as described and as shown in the photos. Inspections of the system are possible by arrangement. We will gladly provide interested buyers with further technical information.

Condition: used, Year of construction: 2000, grinding length 300 mm Csdpfx Abozpf Ucs Dohb grinding width 500 mm

Condition: good (used), Year of construction: 2000, Cast iron clamping plate, STOLLE GAP 900, year of manufacture approx. 2000. Dimensions: Length 1500 mm, width 900 mm, height 100 mm, weight approx. 1000 kg. Cedpezu N Ukofx Ab Dohb Longitudinal grooves for T-slot nuts M16. In good condition.

Condition: used, Year of construction: 2000, table width: 2,700 mm, table length: 3,300 mm, total length: 3,800 mm, total width: 1,000 mm, total height: 2,700 mm, overall weight: 2,000 kg, No. 04544 Perforated plate press Hess JULIA Used, year of construction 2000 Dimensions of the perforated plate 3300 x 2700 mm LW 4 manual hydraulic cylinders (2 in need of repair) 12 pneumatic cylinders (2 magnetic and with angle adjustment) Cjdpjy E N Izsfx Ab Dehb Transport dimensions approx. 3800 x 1000 x 2700 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: excellent (used), Measuring stand Brand: Fischer Instrumentation Cedpfx Aewn E U Nsb Dshb (28635) Measuring table 80 x 80 mm Installation size 110 mm

Condition: new, DAWN DN Series (Single Spindle) Dawn Machinery Machine overview Suitable for grinding inside and outside diameters as well as the end surface of heavy or non circular work pieces. Heavier work pieces can be more easily loaded to the machine by overhead hoist Fully enclosed covers and oil mist reclaiming device prevent leakage of grinding oil and mist. Machine options Model DN-500 Specification Model DN-500 Grinding Diameter (Max) 610mm ø Csdpfeubbp Sex Ab Djhb Swing (Max) 610mm ø Max work height 400mm Motor Power 18/23kW CNC Control System SIEMENS 828D

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. Cedpfsnxi R Uex Ab Dohb A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Chedpfxjnxi Uus Ab Djb MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Condition: new, functionality: fully functional, NEW Perfect DT Series of machines with the touch screen display and easy to use interface. Automatic NC controlled downfeed operation with spark out. Plunge grinding, criss-cross grinding and surface grinding. 300 x 600mm grinding capacity 500mm spindle centre to table 355 x 38 x 127mm grinding wheel Fine pole mag chuck + demagnetiser Coolant system with paper filter and magnetic seperator NC Auto downfeed control system LCD touch screen control panel with easy to use graphical interface Criss-cross grinding function Auto criss stroke adjustment via the touch screen control Ballscrew and microfeed for the cross feed Stepless variable hydraulic system Chodpfx Absnzh T No Deb Quantitive lubrication system Back water splash shield

Condition: new, Perfectly built to optimise grinding and accuracy efficiency. Auto cross with hydraulic longitudinal. Manual vertical axis. Table longitudinal travel by sensor and solenoid valve - continuous lubrication. Specification Perfect D4080AH Saddle type surface grinder Table size 400 x 800mm Max. Grinding surface 400 x 800mm Max. distance centre of spindle to table 500mm (Option: 650mm) Table speed 5 ~ 25m/min Table guideway V & Flat way Auto. Cross feed increment approx. 0.5mm ~ 20mm Rapid power cross feed approx. 1100mm/min (60Hz) 900mm/min (50Hz) Cross feed on hand wheel 1 rev 5mm 1 gra 0.02mm Cedpfxonzh Uie Ab Dshb Rapid power head elevation 550mm/min (60Hz) 450mm/min (50Hz) Vertical feed with MPG 1 rev 2mm 1 gra 0.01mm Auto down feed (Option) 0.001mm ~ 0.999mm/time Wheel speed 60Hz/50Hz 1750rpm (60Hz) 1450rpm (50Hz) Wheel dimensions 406 x 50 x 127mm Spindle motor 5HP Hydraulic pump motor 2HP Auto. Cross feed motor 1/5HP Standard Equipment Grinding wheel and wheel flange Flange extractor Wheel balancing arbor and base Wheel dresser with diamond Levelling screws and plates Tool box and tools Working light Manual AD5 Automatic downfeed control Magnetic chuck and demagnetiser Coolant system with paper filter

Condition: good (used), clamping plate, welding table, welding table, straightening plate, straightening table Cedpfxjv E Edms Ab Djhb -Clamping plate: with base frame -Clamping surface: 4400 x 2200 mm -Table height: 875 mm -Plate thickness: 30 mm -Flatness: see photos (straightening sheath not included) -Transport dimensions: 4000/2200/H875 mm -Weight: 2222 kg

Condition: used, Year of construction: 2000, VENJAKOB HGS-Z/H Surface Coating Machine / Painting System Manufacturer: VENJAKOB Type: HGS-Z/H Cedpfszvaz Djx Ab Dehb Year of Manufacture: 2000 Machine Type: Automatic surface coating machine / Spray painting system for all 5 sides Surface coating machine with 4 spray heads for water-based paints, solvents, and stains Design: Automatic surface coating machine Process: Spray painting / Surface coating Workpiece transport: Continuous operation Compressed air connection: approx. 6 bar Application area: Wood and wood-based components Control system: VENJAKOB control system Paint application: Spray application Design: Industrial continuous system Machine dimensions: 4450 x 3170 x 2520 mm Passage width: 1300 mm Working height: 920-960 mm Passage height: 200 mm Rubber conveyor belt with paint recovery and belt cleaning

Condition: not inspected (used), Year of construction: 1999, grinding length: 1,730 mm, grinding width: 930 mm, total height: 550 mm, 3 automatic axes Codpfx Abozl Rxle Dshb spindle speed variator feedrate variators grinding wheel 400x60x127mm magnetic chuck weight 6500 kg