Used Swivel Spindle for sale (15,394)

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 440.10.008.12, functionality: fully functional, operating hours: 500 h, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 102 mm, cutting width (max.): 2,600 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: manual, rotational speed (max.): 4,700 rpm, total length: 2,200 mm, total width: 1,500 mm, total height: 1,070 mm, overall weight: 350 kg, table height: 90 mm, year of last overhaul: 2012, Equipment: CE marking, documentation/manual, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard Lredpfx Ahez H Sbbj Sou - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: new, Year of construction: 2025, Rojek sliding table saw PF 350 industry - execution The machine design has many technical innovations that increase useful utility properties of this machine. The high quality workmanship makes this sliding table saw the best in its class. The machine is standardly equipped with aluminum sliding table CV 360T with very precise and firm fixing on hardened bars. The machine can be equipped with an aluminum sliding table of multi-chamber, very rigid construction CV 400T, precise and rigid version with steel bar fixing. Aluminum sliding table size 400 x 3200mm. The precision and reliability are guaranteed by massive swivel segment guide of the saw mechanism in the robust cast iron body and scoring unit with separate motor. TECHNICAL SPECIFICATIONS Saw Motor power S6 40% 7,5 kW/3×400 V Motor speed 2 870/min Max. Saw blade diameter with scoring Ø 350 mm Spindle diameter 30 mm (1″) Saw blade spindle speed 4 450/min. Max. Cutting height 120 (83 [45°]), Saw blade tilting 0° ÷ 45°. Lredpfsn D Arhox Ah Ssu Max. Cutting width 1 300 mm Scoring unit Motor power of scoring unit 0,75 kW (1 Kw) Saw blade diameter Ø 120 mm (100 mm) Spindle diameter Ø 20 mm Speed of rotation 8 530/min Machine dimensions length 3 355 mm width 3 450 mm Table height 892 mm Max. Machine height 1 460 mm Table size 1 185 x 500 mm Suction pipe diameter 100 + 100 mm Gross weight 680 kg Net weight 675 kg Aluminum sliding table CV360T table size 3 200 x 360 mm Support frame size 1 240 x 650 mm cutting length 3 200 mm Power line fuse 16 A (25 A) Noise level (without technology) 81,8 dB(A) Noise level (with technology) 85,3 dB(A) Location: Ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1977, functionality: fully functional, - 6 spindles - max. bar diameter: 32.0 mm - guide tubes - chip flushing system - accessories: cams + gears Lodpfxjz Iz D Ie Ah Sjru - SEMA bar feeder bundle (1989)

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 51.10.318.12, functionality: fully functional, operating hours: 300 h, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 315 mm, cutting width (max.): 420 mm, control type: manual, roller diameter: 440 mm, pivoting range: 45 °, actuation type: electric, total height: 1,900 mm, total length: 780 mm, total width: 650 mm, overall weight: 140 kg, table height: 91 mm, year of last overhaul: 2012, saw band speed: 333 mm/s, Equipment: CE marking, documentation/manual, motor brake, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) Lodpsz Im Huefx Ah Ssru - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: refurbished (used), Year of construction: 1998, workpiece weight (max.): 15,000 kg, travel distance Z-axis: 1,000 mm, chuck outer diameter: 1,750 mm, spindle speed (max.): 400 rpm, turning diameter: 2,100 mm, turning height: 1,350 mm, rotational speed (max.): 3,000 rpm, feed force Z-axis: 50,000 N, year of last overhaul: 2026, The Millennium provides very high precision turning and versatile machining capability. Always precise, always powerful. Features of this machine:- – Involute chain drive for very high speeds, very low noise – a 36” diameter Timken cross roller bearing, the ultimate bearing – see last page – All steel 1750mm dia. 4 jaw chuck for high speeds. Maximum loading 15,000kgs. – A servo powered C axis control that provides backlash free C axis movement – high power and high accuracy – 200mm square forged steel ram - high accuracy heavy cutting when required and incorporating a 15KW ISO 50taper live spindle providing speeds 20 to 3000rpm for rotary contour milling, pcd drilling and angle milling and grinding with attachments (new heads can be provided to order). 1350mm maximum height under ram – Automatic pick up of turning tools, live tools and attachments from the 18 pocket tool magazine – Raise and lower crossrail - high precision latching and clamping at 200mm pitches – flexibility without loss of accuracy Fanuc 18Ti. A very precise, powerful and versatile machine tool. Performs all functions shown in photo gallery Lredpjy Uwxtsfx Ah Sju 12 months guarantee

Condition: used, Year of construction: 1973, Used Machine Year of Manufacture: 1973 Features and Technical Specifications - Table milling machine for profiling, grooving, and rebating with appropriate milling tools - Three speed settings to accommodate different tools and machining operations - Spindle speeds: approx. 2,500 / 4,500 / 6,000 rpm - Milling arbor diameter: 30 mm - Height adjustment of the milling spindle: approx. 70 mm Lodpezy Dzvsfx Ah Sjru - Milling stop ruler with fine adjustment for tool diameters up to 250 mm - Weight: approx. 385 kg - Caution: The machine does not have a motor brake! - Availability: available shortly

Condition: used, total length: 1,700 mm, total width: 1,000 mm, total height: 2,100 mm, Year of manufacture: 2001 Colour: Grey - Details: - └ Description: Readout positioning does not work properly. Price AS-IS - Year: 2001 - CE marking present: Yes - Serial number: AB/143039 Ledpfx Aoymlahoh Soru - Spindle diameter [mm]: 40 - Table length [mm]: 1195 - Table width [mm]: 350 - Feeding device present: Yes - Guide present: Yes - Tool key included: Yes - Spindle speed: Manual - Voltage [V]: 400 - Current consumption [A]: 12 - Fuse [A]: 20 - Transport dimensions: 1700mm x 1000mm x 2100mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Lsdpjzmukujfx Ah Sjru

Condition: good (used), Year of construction: 2014, functionality: fully functional, using Stäubli robots Lodpozuc T Tofx Ah Ssru Specifications, information, price, images, etc. can be found in the PDF documents attached.

Condition: good (used), Year of construction: 2010, functionality: fully functional, DMG Gildemeister GMC20, manufactured in 2010 • Siemens 840D Powerline control system • Six spindles plus 6-2 backworking • All front spindles with X, Z, and W axes • Hainbuch SZ9012B2 collet chucks on the front, equipped with Hainbuch collets in sizes 6 mm, 10 mm, 12 mm, 14 mm, 16 mm, 20 mm, and 24 mm; bar feed accessories included • 9012 ETPU special collet chuck installed on the rear. Various sizes from 3 mm to 22 mm included • HP cutting oil supply • Front tool stations with 30-degree taper on all six spindles. 25 holders included • 15 turning tool holders with 12x12 cross-section • 4 round tool holders with 16 mm diameter • Double “X” axis driven tool holder for use in position 5 Lredpo Adp H Njfx Ah Sju • Single “X” axis driven tool holder for use in position 4 • Single “Z” axis driven tool for use in 6-2 backworking • Iemca SIR 25P bar feeder • Part ejector, collection device, conveyor belt, and collection container • Losma Filtermist • Kraft & Bauer fire extinguisher

Condition: used, Spindle 3.5 - 16 - 10 kVA 2750 - 14660 - 23660 RPM Lrjdpfsp I T Rqjx Ah Seu Inspection is possible at my warehouse after prior appointment. Collection or shipping are both possible.

Condition: used, Year of construction: 2011, Offers considered prior to auction Index MS32C Multi-Spindle Automatic Lathe. Serial No. 150759 (2011) with Siemens Sinumerik/Index C 200-4D Control, Imeca Sir-MS32 Bar Feed, Riedel Chiller Ljdpfx Aoz H Uzwjh Seru Location: These lots are located in Barnstaple, Devon UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 1963, Rigid milling machine Year of manufacture: 1963 Spindle diameter 30 mm Lsdpfezk N Iisx Ah Seru Availability: at short notice Storage location: Röllbach

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: AB00022616, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 901 kg, SCM Class TI 145ep shaper in CE version, manufactured in 2022. Equipped with the READY 3 UP system, featuring a shaper fence with mechanical programming, a FAST sectional table with manual adjustment, and a support for the feeder with manual vertical and horizontal movements. Interchangeable shaper arbor with MK 5 coupling, tool holder cone MK 5 with adapter and clamp (right), and a T-SET rapid tool clamping system. LL version with 2 cast iron table extensions for profiling. Ljdpjz Nggrefx Ah Ssru

Condition: used, total width: 900 mm, total length: 2,050 mm, total height: 2,100 mm, Year of manufacture: 1956 Colour: Green Empty weight: 2.400 kg - Year: 1956 - Serial number: 3706 - Drive system: Conventional - Drive system: Gear drive - Number of drills [pcs]: 4 - Power [kW]: 6 - Table type: Fixed table - Table length [mm]: 1800 - Table width [mm]: 350 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 25 - Reach [mm]: 275 - Main spindle power [kW]: 6.0 Lrsdpfx Ahoz R Dt Eo Sju - Min. spindle speed [rpm]: 180 - Max. spindle speed [rpm]: 2000 - Options: Tapping function - Transport dimensions: 2050mm x 900mm x 2100mm (l x w x h) - Transport weight [kg]: 2400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1992, Table milling machine, Panhans Type 250, from a training workshop. - Dovetail and slot table - Aigner integral fence - Elu feed system - Power: 5.5 kW - Speeds: 3000/4500/6000/9000 rpm - Clockwise/counterclockwise operation - Spindle: 30 mm #8503 Net price Lodpfx Asztwr Ish Seru

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Good morning, I am offering for sale a Felder F900Z Z under-spindle milling machine. The machine is in VERY GOOD condition – it has been used less than it has been standing idle. It is a robust machine, ideal for precise woodworking. Its condition can be seen in the photos; it is ready for immediate use and has no hidden defects. Lsdsz R R Ttopfx Ah Sjru

Condition: excellent (used), Tacchi HD/1450 X 4M Large Spindle Bore (515mm) Year 2002 Siemens CNC Control Swing over bed 1450mm Swing over saddle 1000mm Hollow spindle 515mm Chucks front and rear of Headstock Speed range 1.5 – 450 rpm 15,000kg weight between centres Baruffaldi 4 way Auto Toolpost 2 x 3 point steadies Lsdoxg Ivdopfx Ah Ssru

Condition: used, Year of construction: 2006, spindle bore: 65 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, NC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Ledpe Aawrlefx Ah Sjru Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2007, Offers considered prior to auction Lrodsz Ialqepfx Ah Ssu Index MS32C Multi-Spindle Automatic Lathe. Serial No. 150551 (2007) with Siemens Sinumerik/Index C 200-4D Control, Imeca SIR-MS32/33/P Bar Feed, Riedel Chiller Location: These lots are located in Barnstaple, Devon UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2012, 300mm max cutting diameter, 510mm mm max turned length, 51mm bar capacity, 11kW motor, Spindle speed 6,000 rpm, milling speed 6,000 rpm, Lredpfszg Eb Dex Ah Sou sub-spindle speed 6,000rpm, C axis 0.001 degrees, Fanuc oi-Series Control, 3 Jaw Chuck, Tool setter, 12 Station turret, parts catcher, parts conveyor

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, total width: 1,990 mm, total length: 4,500 mm, total height: 2,300 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, overall weight: 9,000 kg, Gildemeister Sprint 65 Linear - CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Lode Aawvwjpfx Ah Ssru Technical details: Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Code: 0505 Brand: SCM Model: 150 - CE standard Automatic spindle moulder with tilting spindle, with numerical control programmer (3 controlled axis) for joinery, furniture, bespoke furnishings, wooden joinery, doors, panels, plastics, composite materials and various other applications – CE Standard Ledpfxe Ad Nz Ts Ah Seru Technical data: Electronic programmer with 3 controlled axis (spindle lifting – spindle tiltimg – spindle guide) allowing up to 98 programmes to be stored and executed automatically Spindle diameter mm 35 Spindle tilting -10° to +45° Spindle speed rpm 3000/4500/6000/7000/10000 Motor power Hp 7,5 Table length mm 2600 Max spindle projection mm 215 Work surface height from ground mm 920 N° 2 dust extraction inlets diameter mm 120 Equipped with Maggi 4-roller automatic feeder Maggi with variable speed control Overall dimensions mm 2600 x 1300 x 1800 h Weight kg 1400

Condition: excellent (used), Catalog number: 8097 TECHNICAL DATA - spindle diameter: 30mm - spindle working height: 170mm - spindle locking - adjustable spindle (up/down) - original cast iron guide - 5 types of rotational speeds: 3000, 4500, 6000, 8000, 10000 rpm - table dimensions: 730x1190mm - brake - motor: 5.5kW - dust extraction port diameter: 120mm - dimensions (L/W/H): 850x1200x1220mm - weight: 380kg ADVANTAGES - Made in Italy - Brake - Unpainted - Used milling machine, very good condition Lodpfszzyrmjx Ah Ssru - Designed for professional use Net price: 10900 PLN Net price: 2535 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Catalog number 7882 TECHNICAL DATA - spindle diameter 30mm - spindle working height 200mm - interchangeable spindle - spindle locking - adjustable up/down - cast iron guide with full adjustment - 3 types of rotational speeds + right/left - table dimensions 1000x950mm - cast iron table - with side table 1100x330mm - clamping device - motor 3.7kW - brake - dust extraction nozzle diameter 120mm - dimensions (L/W/H) 1750x1400x1250mm - weight 683kg Lrjdpfxjztqups Ah Seu ADVANTAGES – made in Germany – with side table – used milling machine – very good condition Net price: 7900 PLN Net price: 1837 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)