Used Table Drill for sale (41,054)

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: GG94US-13608, total width: 6,200 mm, total length: 10,500 mm, overall weight: 6,000 kg, input current: 34 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 8 bar, pressure: 8 bar, Table for laminated glass, max 8+8 and 4600mm including loading table 100BLM-J Bodpsxq D Uwjfx Aczelr Total weight approx. 6000Kg.

Condition: ready for operation (used), Feeding table Kleemann Dim.: 6500 x 1300 mm Incl.: E-motor Blsdpfx Aou S Tq Noczjr

Condition: excellent (used), Year of construction: 2015, operating hours: 3,093 h, Make of engine: Deutz 6 cylinder CE mark: yes Technical condition: very good Visual appearance: very good Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Delivery terms: EXW Production country: SE Please contact Christiaan Dekker for more information Atlas Copco Boomer WE3 C30 Year: 2015 Hours: 3093 1000 volt CE certified Gross weight: 54.7 ton Diesel power180KW 6 cylinder engine Electric power 28KW/ 320Ampere Hydraulic tilt cabin Blodpfxjxykvae Aczsr Prepared for Leica GPS Rotary air drills COP 3038 drills Hydraulic waterbooster Hydraulic Compressor Hydraulic manbasket Tyres 90% good Price Euro. 129.000,-

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Stainless steel work table AT 3500 with beechwood worktop and rear gallery 2 x stainless steel sliding doors with storage shelf Drawer unit on the left, shortened Door with shelf, shortened Dimensions: 3500 x 800/700 x 900 mm (WxDxH) Used device, cleaned Top sanded & re-oiled Delivery service Many more work tables in stock! Bljdpfx Aorhd Udjczjr

Condition: ready for operation (used), Spindle taper Aciera Drilling capacity in steel 22 mm Throat 270 mm Table size 700 x 370 mm Blsdpouy R T Tsfx Aczsr Spindle speeds , inf. variable 40-3'600 rpm MARCELS MASCHINEN CH

Condition: used, Year of construction: 2004, Serial number: EKJ0043xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21885 Specifications: - 2004 (2012) model - Hours: Approx. 600 - Weight: 6200 kg - Chassis from 2004 - The rest is from 2012 - Drilling equipment is not included - 2 engines can be included as parts - Ready for delivery Description: The rig burned down and then everything was replaced in 2012. The chassis is from 2004, but the rest has been replaced. The job was done by Epiroc. The machine is ready for delivery. Own weight: 6200 Engine hours: 600 Model: 2004 (2012) Welldrill 3050CR Borerigg Blsdpfjxy Eyaex Aczjr

Condition: new, mount diameter: 50 mm, clearance between the columns: 375 mm, spindle mount: MK 4, total height: 2,450 mm, total width: 1,020 mm, total length: 610 mm, table width: 600 mm, table length: 600 mm, overall weight: 820 kg, quill stroke: 230 mm, Column Drill Maximum drilling capacity Ø 50 mm Spindle holder MK 4 Spindle speed min. 54 rpm Spindle speed max. 2.090 rpm Stroke of the drill pinole 230 mm Bedpfxsxu H Eyj Aczelr Distance column to drilling center line 375 mm Drilling table size 600 x 600 mm Length 610 mm Depth 1020 mm Height 2450 mm Weight 820 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2024, condition: new, The hydraulic scissor lifting table Unicraft Type SHT 2000 (1300058) offers a reliable solution for your lifting projects, e.g. for manually loading a planner machine or saw from entire timber stacks. With an impressive load capacity of 2000 kg and a robust construction, this lifting platform is ideal for use in industrial environments. This scissor lift table is characterized by its precision and ease of use and enables you to lift heavy loads safely and efficiently. With its table height of max.: 1,010 mm, the Unicraft SHT 2000 is the ideal choice to improve your workflows and spare the back of the machine operator. Blodpfx Aenzh Hfoczor Capacity: 2.000 kg table height min.: 190 mm Table height min.: 190 mm Table height max.: 1.010 mm table height max.: 1.010 mm table surface: 800 x 1.300 mm tabletop: 800 x 1,300mm Cable length: 3 m Safety standard: EN 1570 cable length: 3 m drive: Electrical-Hydraulic security standard: EN1570 engine: 0,75 kW safety standard: EN 1570 State: New with warranty

Condition: excellent (used), Year of construction: 1997, DAREX drill sharpening machine 1/3 HP Year of manufacture: 1998 3450 rpm Blodpsxyvxajfx Aczor 220 V Wheel diameter: 150 mm Left side with drill sharpening attachment (angle 90° - 180°), longitudinal adjustment 25 mm

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Bakery and confectionery work table. Stainless steel with granite worktop. Reinforced welded construction. Storage shelf on the left, open on the bottom right. Stainless steel design. Approx. dimensions: 3000 x 800 x 890 mm (W x D x H). Used device, cleaned. We have many more top-quality tables in stock! Bedjwv E Niepfx Aczslr

Condition: ready for operation (used), controller manufacturer: Mazatrol 640, empty load weight: 19,000 kg, total length: 3,274 mm, total width: 8,100 mm, total height: 3,546 mm, Paletchanger 2 tafels Hoge druk koeling 15 bar Schroottransportband Maximale werkstukafmetingen: 3240 x 880 x 640 mm Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 800 mm Travel Z-axe: 585 mm Dimensions clamping space- table: (2x) 750 x 3240 mm Blsdpfxsxuwxqs Aczjr Power on spindle: 30 kW Admission in millinghead (ISO): ISO 50 Max speedrange: max 6000 rpm

Condition: used, Technical details: table load: 3 t machine weight approx.: 1,376 kg dimensions LxWxH: 1,4 x 1,7 x 0,18 m Bodpfjxz E Exox Aczjlr positioning rotary table Load capacity tested up to 3 tons. Currently operates in 2 positions at 180 degrees. Can be modified up to a maximum of 270°. *

Condition: new, mount diameter: 40 mm, clearance between the columns: 350 mm, spindle mount: MK 4, total height: 2,220 mm, total width: 930 mm, total length: 560 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, quill stroke: 180 mm, spindle speed (max.): 1,450 rpm, spindle speed (min.): 50 rpm, Column Drill Maximum drilling capacity Ø 40 mm Spindle holder MK 4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Bljdpexu Hp Eofx Aczer Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Drilling capacity 13 mm Spindle mount B 16 6 spindle speeds 410 - 3400 rpm Drilling depth 60 mm - Drill head height adjustable - Motor pole reversible Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel Bljdpfownfarjx Aczjr

Condition: new, BRAND NEW T-TYPE FLOOR TYPE MILLING MACHINE HEIDENHAIN TNC 640 CNC Control HEIDENHAIN Package (motors, measuring systems, and handwheel) X-axis: 4,000 mm Z-axis: 1,500 mm Y-axis (cross-ram): 1,300 mm V-axis (cross-column): 1,000 mm Rotary table (C-axis): 2,000 x 2,000 mm Max. load capacity up to 15,000 kg Automatic universal swivel head 1° x 1° (optional with fixed quill Ø 210mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Maximum spindle motor power: 53 kW ICS - internal coolant supply - 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Blodpjq I Nkbefx Aczer ATC - Tool changer: 60-station (vertical/horizontal change) Double hinged belt chip conveyor (longitudinal) Perimetric enclosure (open top) Only inquiries from Germany will be answered.

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Location: Supplier Bledoxta Dyspfx Aczsr

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Bodsvn U Adjpfx Aczelr Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Condition: new, Year of construction: 2025, cutting width (max.): 280 mm, cutting height (max.): 48 mm, saw blade diameter: 168 mm, cutting width at rip fence: 280 mm, Festool Cordless Table Saw CSC SYS 50 EBI-Set 36 Volt battery voltage, No-load speed 4,500 - 6,800 rpm, tiltable from -10° to +47°, cutting height 0 - 48 mm (at 45° = 34 mm), electric height and tilting adjustment with digital display maximum rip capacity 280 mm, sliding table with cross-cutting width up to 450 mm, miter angle stop 0 - 70°, complete with: saw blade 168 x 1.8 x 20 mm, Z = 42 tooth WD, parallel guide, push stick, angle stop, Bljdpfjxzudqox Aczsr dust collection bag, riving knife for concealed cuts, riving knife with blade guard, 6 mm hex key, energy set SYS 18 V 2 x 5.5/TCL 6 DUO, stand UG-CSC-SYS Order No.: 577379 available ex stock Seevetal, promotion valid until the end of 2025, while stocks last, without shipping and packaging

Condition: new, spindle mount: MK 4, total height: 2,220 mm, total width: 930 mm, total length: 560 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, quill stroke: 180 mm, drilling capacity: 40 mm, Equipment: type plate available, Maximum drilling capacity Ø 40 mm Spindle holder MK-4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Blsdpfxoxu Hnuo Aczer Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2013, cutting height (max.): 104 mm, total length: 2,600 mm, total width: 1,900 mm, total height: 1,800 mm, overall weight: 900 kg, slide length: 2,500 mm, sliding table length: 2,500 mm, No. 04505 Sliding table saw Felder K 700 S Used, year of construction 2013, very good condition Saw blade diameter 250 - 315 mm (350 mm not CE-compliant) Sliding table 2500 mm, anodized, edging shoe Cutting height max. 104 mm Electric height adjustment Electric angle adjustment Digital display for cutting height and cutting angle Speed 4800 rpm Removable flange for grooving tools up to max. 229 mm diameter x 20 mm thickness Parallel fence with digital display and fine adjustment Cutting width 1250 mm Saw motor power 7.35 kW Circular saw unit with double segment suspension Scoring unit 0.75 kW Pivoting circular saw top guard, with 80 mm diameter extraction connection Circular saw table extension 430 x 508 mm Electric switch point with scoring unit on the sliding table Cross table 1150 x 600 mm, with cross-cut fence 2600 - 3200 mm Degree grid with length compensation Double mitre gauge Felder EGL 1350 with calculator Including 6 Silent Power saw blades for wood and aluminum (some unused), 1 scoring blade, 1 grooving/scoring disc Machine ready to plug in with cable and 16 A plug Incl. Technical documentation Transport dimensions approx. 2600 x 1900 x 1800 mm LWH Weight approx. 900 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Blsdpsxzvaajfx Aczsr Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, BRAND NEW MACHINE HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 1,500 mm Rotary table: 1,600 x 1,200 mm Blsdpfoq I Ncqsx Aczor Maximum workpiece weight: 6,000 kg Automatic universal diagonal swivel head 1° x 1° (optional with fixed ram Ø 210 mm) Spindle taper: SK-50 DIN 69871/A Max. spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS – internal coolant supply – 36 bar Rapid traverse X,Y,Z: 30 m/min Positioning accuracy: 0.015 mm Repeatability: 0.010 mm ATC – tool changer: 40 positions (vertical / horizontal change) 2 x longitudinal hinge-type chip conveyors Perimeter enclosure (open top) Only inquiries from Germany will be answered.

Condition: used, Year of construction: 1996, Second hand laminated glass cutting table, HEGLA Type VSG M33, year 1996 Bljdexxmmxjpfx Aczor

Condition: ready for operation (used), Year of construction: 2015, This TELSONIC TelsoSPlice TS3-6 P3.6 wire welding sytem was manufactured in 2015. It features a 15" SVGA touch screen, a pneumatic unit, and a 3.6kW WeldHead. The machine includes a barcode scanner, keyboard, and a spacious 2000 x 1000 mm table. Consider the opportunity to buy this TELSONIC TelsoSPlice TS3-6 P3.6 Table. Contact us for more information about this machine. Application Types Bledpexyazrsfx Aczsr Other Plastic Processing Machinery

Condition: used, Year of construction: 1994, Some typical specifications for the TOS W75 machine are: Bledpfoxw Ucljx Aczer Spindle diameter: approx. 75 mm. Spindle speeds: e.g. 18-1800 rpm. X-axis: approx. 1,250 mm. Y-axis: approx. 900 mm. Z-axis or W-axis: various values, e.g. 560 mm. Table size: approx. 950 × 950 mm. Weight: approx. 10,000 kg All information provided without guarantee.

Condition: new, BRAND NEW ROTARY TABLES // ROTARY-SLIDING TABLES Bodpem Tv Azsfx Aczjlr Positioning, infinitely variable rotation and interpolation Rotary table sizes: 1,000 x 1,000 // 1,200 x 1,200 // 1,500 x 1,500 // 1,800 x 1,800 // 2,000 x 2,000 // 2,500 x 2,500 // 3,000 x 3,000 // 3,500 x 3,500 // 4,000 x 4,000 mm --- The clamping surface can also be round instead of square - Maximum workpiece weight: 6,000 to 80,000 kg Optional sliding axis: 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ±5 arc seconds Only inquiries from Germany will be answered // Only inquiries from Germany will be processed