Used Table Edge Trimmer for sale (19,339)

Condition: new, Edge and contour milling machine Make: Assfalg Model: KKE 1 condition: new machine Speed: 8.000 - 24.000 rpm (infinitely variable) max. bevel width: 3 mm serially equipped with: Hfedsbhfzbopfx Apneg - Guide rail - wrenches, open-end wrenches - Insert ring Ø 30 x 8 mm - Collet Ø 6 mm with union nut - Operating instructions

Condition: new, Deburring machine brand: Aboagye Hfjdpfxjdurxnj Apnjg Model: AF 165 Condition: new machine Speed: 2,800 RPM maximum cutting width: 1 mm equipped as standard with: -Special flap disc K80-ST -Suction nozzle -Manual

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. The finished workpiece is returned to the operator, eliminating the need for manual reworking. - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edging thickness: 0.4 - 12 mm - Minimum edging length: 400 mm Feed rate: 18 m/min Equipped with: - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Hfsdpswkba Tsfx Apnjg Location: Flörsheim

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm Hfsdpfx Apowka S Ijnsg - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: - fitted with new glue application system - manually adjustable infeed fence - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming - complete air nozzle - scraper unit 1929 - chip collection box - surface scraper 1964 Hfodjwka H Sspfx Apneg - extraction hood set - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm - feed speed: 12.5 m/min - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa - minimum air velocity: 20 m/sec - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm - compressed air: 6 bar Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical specifications: - Grinding unit can be swiveled via hand crank - The machine base is made of welded steel, ensuring high torsional rigidity and vibration-free operation - Oscillating sanding belt with a separate geared motor for improved sanding results - Oscillation can be optionally switched on - Graphite-coated sanding shoe for longer sanding belt service life - Height-adjustable sanding table allows use of the full sanding belt width - Additional table for sanding radii with integrated extraction ports - Spring-loaded belt tensioning system automatically compensates for differences in belt length - Equipped with adjustable stops, making it ideal for veneer sanding - Veneer overhang can be easily sanded down - With mobile undercarriage - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s Hfodpfswkbcbjx Apnog - Oscillation stroke: 15 mm - Sanding surface length: 800 mm - Sanding surface width: 150 mm - Grinding unit swivel range: 0–45° - Worktable length: 950 mm - Worktable width: 450 mm - Worktable height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short-term Location: Flörsheim

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 123 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low lift pallet truck Load centre: 600 Fork width: 160 mm Fork thickness: 47 mm Transmission: Electromechanical Condition: New device Technical condition: New Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery voltage: 24V Battery capacity: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Hodpfey D U H Hex Apnsfg Battery year: 2026 Description: - PIN code access - Discharge indicator and operating hour meter, - Lithium battery - Sprung side support rollers D80x30 - Tandem load rollers D80x70

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 123 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low lift pallet truck Load centre: 600 mm Fork width: 160 mm Fork thickness: 47 mm Transmission: electromechanical Condition: new machine Technical condition: new Front tyre type: polyurethane Rear tyre type: polyurethane Battery voltage: 24V Battery capacity: 20Ah Hfjdoy D U Htjpfx Apnog Battery manufacturer: Noblelift Battery type: lithium-ion Battery year of manufacture: 2026 Description: - PIN code access - Discharge indicator and operating hour counter, - Lithium battery - Spring-loaded side support rollers D80x30 - Tandem load rollers D80x70

Condition: new, functionality: fully functional, The Table Top Print bagging machine enables efficient packaging and sealing of products in pre-made bags and is suitable for various formats. The machine is easy to operate and features a user-friendly display for setting up, saving jobs, and controlling operating parameters. For maximum flexibility, it offers automatic and manual operating modes with a secure sealing bar. Training a packaging operator takes less than five minutes. With integrated thermal transfer printing technology, bags can be directly printed with high-resolution graphics, text, and barcodes—eliminating the need for separate labeling. Features: - Multi-color display for straightforward settings - Pre-selection of desired product quantity for packaging - Integrated total product counter (with reset function) - Roll change in under one minute - Sealing via foot pedal, automatically, or manual push-button - Feed systems for automatic bag filling available on request Technical Parameters: 1. Maximum bag length: 450 mm 2. Maximum bag width: 250 mm 3. Maximum bag thickness: 0.04–0.1 mm per layer 4. Packaging speed: up to 25 units/minute 5. Supply voltage: 1Ph. 220V 50Hz 6. Power consumption: approx. 1 kW 7. Machine weight: approx. 70 kg (including printer) 8. Machine dimensions: approx. 670 x 665 x 860 mm 9. Print area: 53 x 75 mm Hfsdpfjxlzr Ajx Apnjg 10. Bag type: wicketed bags on rolls Base machine: €12,500 + Thermal transfer printer: €5,500 + Label dispenser: €2,900 + SATO label printer incl. dispenser: €6,500 to €9,000

Condition: used, Year of construction: 1998, machine/vehicle number: 01694001/8101120034, functionality: unexamined, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 5 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 83 mm, cutting width (max.): 690 mm, saw blade diameter: 250 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: manual, rotational speed (max.): 4,400 rpm, rotational speed (min.): 4,400 rpm, Equipment: CE marking, Metabo Table Saw Tk U 1693 D Maximum cutting height: 83 mm, Maximum saw blade diameter: 250 mm, Motor: 2 kW, 380 V, 50 Hz, Sliding table length: 1800 mm, Maximum rip capacity at parallel fence: 690 mm, Sold as inspected at location Seevetal, Hedpfx Aoy N Srkepnjfg Without transport, subject to prior sale.

Condition: used, Year of construction: 1995, machine/vehicle number: 20373, functionality: unexamined, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, overall weight: 127 kg, table height: 850 mm, Equipment: CE marking, saw blade guard, Scheppach table saw ts 4000, max. cutting height 90 mm, at 45° max. 60 mm, max. saw blade diameter 315 mm, tilting capability 0° to 45°, 4 kW (5.4 HP) motor, 2,000 mm sliding table, lifting and transport device, foldable table extension, tenoning attachment, SUVA saw blade guard, GS wood dust tested with CE mark, as inspected at location Seevetal, without transport, subject to prior sale. Hsdpfx Apoy N Sfqsnsfg

Condition: good (used), Year of construction: 1960, Make: Bäuerle, including integral fence and HolzHer power feed Model: SFM 2 Tilting range: 0 to 45° Brake Motor with 2 speeds/pole-changeable 6 speed settings: 1,800 - 4,500 - 5,600 - 6,000 - 9,000 - 12,000 rpm Forward/reverse rotation Table size: 1150 x 1200 mm Spindle diameter: 30 mm Milling fence Hodoy E T Ufepfx Apnsfg Required space approx. 1200 x 1200 x 1300 mm Weight approx. 1000 kg Location: 54634 Bitburg, loaded free on truck, unpacked Delivery in current condition as inspected, function-tested without overhaul, without warranty or guarantee

Year of construction: 2019, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 55119214, This is a refrigerated countertop unit from the manufacturer NordCap, which is perfectly suited for insertion under existing cooking blocks or grills. The unit was manufactured by the premium manufacturer Ideal. The refrigerated countertop unit features a built-in stainless steel evaporator and is equipped with four full-extension drawers. The usable height is 90 mm per drawer. Two identical units are for sale. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional. The unit was only in use for six months and was stored until the end of operation. Used condition is very good. The RRP is €5,900 net. The stated price is net plus 19% VAT. Our used appliance service for you: •6-month warranty on all electrical parts •High-quality brand-name appliances at fair prices •Professional overhaul/inspection & expert cleaning •Tested & fully functional - or your money back •Shipping or pickup available •Expert advice - before and after purchase •Provision of operating instructions, wiring diagrams & spare parts •Tested according to DGUV V3 Technical specifications: •W x D x H: approx. 1380 x 660 x 410 mm •Power supply: V: 230 / kW: 0.265 •Serial number: 460923-80034645-001 Hfodpfsvga Dqex Apnjg •Year of manufacture: 2019 Condition: used, serviced, fully functional Shipping: •Delivery or self-collection by arrangement •Worldwide shipping on request •Shipping to islands or mountain resorts only by arrangement Do you have questions, require advice, or would like to view something in person? You can reach us by phone during our opening hours: Monday-Friday 9:00 AM - 1:00 PM and 2:00 PM - 5:00 PM.

Condition: used, Year of construction: 1991, Saw unit: tiltable 45° Carriage length: 1200 mm Max. saw blade diameter: 250 mm Max. blade protrusion at 90°: 75 mm Saw blade bore: 30 mm Motor power: 2.2 kW Control panel: below on the machine housing Height adjustment: manual Tilt adjustment: manual Tilt angle display: scale Cutting width adjustment: manual Cutting width display: scale Weight approx.: 150 kg Storage location: Hjdjy Sbdhspfx Apnsfg

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, GRAFFENSTADEN ARF 114 Z boring machine, photos and descriptions attached Hfsdpfxsyzm Dfs Apnsg Machine in perfect mechanical and electrical condition Longitudinal travel: 2 m Transversal travel: 2 m Vertical travel: 1.75 m Spindle diameter: 115 mm Spindle stroke: 900 mm 1 Graffenstaden universal head 1 Andréa rotary table 1 extension 1 3-axis digital readout 2 feed ranges via variator for all movements Numerous tools included Machine can be seen in working condition Machine to be dismantled on site Tel: 03.80.92.23.28 or 03.80.92.34.03 or 06.79.58.06.79

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, Hfedpfju R S Nwsx Apneg radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, With swiveling heating rail Hfodoy N Dinepfx Apnjg

Condition: used, spindle diameter 90 mm x-travel 1000 mm y-travel 1200 mm z-travel 1200 mm feed movement 710 mm spindle taper ISO 40 turning speed range 8 - 1600 U/min table-size 1120 x 1000 mm table rotating 360 ° table load 2,5 t total power requirement 11 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 3,3 x 3 m separate switchboard, Hfedpfx Astv Ibdspnsg rapid traverse some tool holders, without facing plate, without steady rest,

Condition: new, Year of construction: 2026, The KANTENKING is the most favorable edge processing solution for creating the zero joint for the trades with feed speeds from 10m / min, as well as in the industrial sector, with high speeds up to 22 m/min. The Kantenking HTK3030 has a speed of max. 22 m/min.. Your edge edger is still "in good condition", but you have already heard a lot about the null joint and ask yourself, if this is also suitable for you. You can retrofit the HOT-AIR system in any existing edge banding or BAZ. The Hot-Air-System has low maintenance and reliable. You tell us your wishes and machine data. So we can together with you and your ideas make an offer for the optimal product. Feed speeds up to 22 m/min. are possible. The Hot-Air-System is optimally integrated in your edge banding or machining center. Hfodpfed Dczzox Apnog Please don't hesitate to contact us.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Edge banding machine Tempora F 60.06 - Year of manufacture: 2018 - Exchangeable glue pot - Units for pre-milling, end trimming, flush cutting, milling, radius scrapers, surface scrapers, buffing wheel - With separation agent and cleaning agent application - Spray device - Edge thickness: 0.4-6 mm - Installation length: 3220 mm Hfodpjx Ha I Usfx Apnog - Saw trimming Transport possible at extra cost!

Condition: good (used), functionality: fully functional, Table and mitre saw TGS 173 with sliding table - on mobile base unit with 2 drawers - Adjustable feet NOT included Transport available at extra cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers. Hodpfx Apex R Eadsnefg

Condition: good (used), Zwick Type: BZ1.0 / TH1S Hfedpfx Ajddantspnjg Zwick table testing machines Zwick with a maximum force of 1.0 kN. The course of the traverse: 1150 mm. Testing speed: 0.1 ... 1800 mm / min Scope of delivery. (See pictures) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), DELTA LC 400 / Rotary Table Surface Grinding Machine -Magnetic chuck (rotary table) 400mm -Max. grinding diameter 400mm -Grinding height (distance table – grinding wheel) approx. 220mm -Grinding wheel dimensions / standard / 200x80x78mm -Spindle speed / grinding spindle 2840 rpm -Fine feed 0.01mm -Distance / column – grinding wheel axis 315mm -Spindle motor / 3kW -Lateral grinding wheel dresser -Machine enclosure -Coolant system Dimensions: LxWxH 1.2x0.8x1.8 meters / Weight 700Kg Hedpfsy Sbgcjx Apnjfg Errors and omissions excepted

Condition: new, table length 1500 mm table width 1500 mm table height 150 mm bore 28 mm weight 543 kg Hfodpfx Apsy N D N Ujnsg

Condition: used, table length 1500 mm table width 1500 mm Hjdpfxoyuqf Eo Apnjfg table load 10 t voltage 380 V Heidenhain D.R.O. Additional plate on rotary table: 2.000 x 3.000 x 3.000 mm