Used Table Polishing Machine for sale (67,639)

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each Bdodpfx Ajxy Stysaaea - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: used, Sandt 530 machine available with 80 T or 100 T Bsdpfx Aaox Sdy Esaeda Punching force: 800 kN Table size: 1600 x 800 mm Punching stroke: 20 – 165 mm, infinitely adjustable Working height: without punching pad approx. 1000 mm Overhauled or Punching force: 1000 kN Table size: 1700 x 1050 mm Punching stroke: 20 – 165 mm, infinitely adjustable Working height: without punching pad approx. 1000 mm Overhauled

Condition: excellent (used), functionality: fully functional, Trendelkamp Separation Table / Vibrating Sieve Machine – 3 Fractions For sale is a Trendelkamp separation table, model TK-K60/85, weight 200 kg. This machine is designed for the precise separation of bulk materials into three fractions by means of vibration and screening. Technical data: • Manufacturer: Trendelkamp Stahl- und Maschinenbau GmbH + Co. KG • Model: TK-K60/85 • Weight: approx. 200 kg • 3-fraction separation • Driven by electric motor with unbalance drive • Robust steel construction, screen decks made of stainless steel Bsdpsw Ip Dtsfx Aaaeda • Screens can be easily replaced upon request (different mesh sizes available) Areas of application: Ideal for plastic granulate, recycling materials, pellets, bulk materials, and other applications requiring separation into three size classes. The machine is immediately ready for use and in good condition.

Condition: new, NEW MACHINE - double sided belt linishing and polishing machine, different configurations possible, for working in seated or upright position - linishing / linishing - linishing / polishing - polishing / polishing Motor 4, 5.5 or 7.5 kW, polishing wheel max. 120 x 500 mm, max. diam. contact wheel 400 mm, linishing belt 50 x 3500 mm Bdsdpfx Aajci Tlioaea - 3 different speeds can be choosen: 700, 800, 900, 1000, 1120, 1250, 1400, 1600, 1800, 2000, 2240, 2500, or 2800 rpm

Condition: good (used), Polishing / buffing machine HAU HR 4 for circular parts up to 200 mm max., with 2 working units, units equipped with reconditioned spray systems for liquid polishing compound, wheel diam. max. 400 mm, width polishing wheel max. 120 mm, shaft diam. 35 mm, machine similar to picture Bodpfx Aaszmbhjajda

Condition: excellent (used), Normal drilling capacity 20 mm Continuous drilling capacity in St 60-2 / E 335 18 mm Spindle holder MK 2 10 spindle speeds 240 - 3800 rpm. Drilling depth 100 mm Bdjdjfzbkhspfx Aaaea Projection 215 mm distance spindle/table up to 360 mm distance spindle/base plate 560 mm table surface 350 x 290 mm Column diameter 75 mm Motor pole-changing 0.6/1.2 kW Total height 1050 mm Weight 100 kg Today's new price: 4.022,00 € net Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: used, Year of construction: 1980, spindle diameter 105 mm cross travel of table 1600 mm vertical adjustment of drilling slide 1600 mm longitudinal movement of column 1000 mm Bsdpfxju Rt Inj Aaasda spindle stroke - max. 600 mm spindle taper ISO SK 50 spindle turning speed range 6,3- 1600 U/min table surface area 1120 x 1120 mm spindle motor 45 kW voltage 400 V feeds x/y/z -stepless 0 - 5000 mm/min rapid travel x/y/z 10 m/min table load 6 t table rotation 360 ° total power requirement 82 kW weight of the machine ca. 18 t dimensions of the machine ca. 4,8 x 4,9 x 4,2 m Machine was complete reconditioned and retrofitted with Siemens 840 D control in 2008 for a price of 400.000,- Euro ! Machine has a 40 position ATC, 5 CNC axes with ball screw drives (X,Y,Z,W,B), housing around machine with safety doors, cooling arrangement built in 2020 and new spindle drive Siemens built in 2008.

Condition: new, Year of construction: 2010, Center of spindle to wall or column 235 mm Column diameter 60 mm Size of table plate 290 x 290 mm Motor output 1 kW Speed 50 - 4000 U/min. Bjdpfx Aew Spc Reaaoda weight of the machine ca. 72 kg

Condition: new, Year of construction: 2025, max. working width 300 mm number of brushing / polishing units 2 st. Feed speed 10 m/min. Max. diameter of brush / polishing rollers 190 mm motor power per brush / polishing roller 4,65 kw Bdedpfsv Ucilox Aaasa

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 570x870x1710 mm Bdjdpfx Aajv A Hhbsaoa Weight 143 kg Total power requirement 1,1 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 830x320x1660 mm Bdsdov A Hg Repfx Aaaoa Weight 56 kg Total power requirement 0,9 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1240x950x1650 mm Weight 435 kg Bdedjv A Hdcspfx Aaaja Total power requirement 4,65 kw

Condition: new, Year of construction: 2025, Blast wheel rotary table installation D = 1500 mm 2 x 7, 5kW spin wheels Questions about technical specifications, etc. contact us in writing or by telephone. Bsdpfx Aaodtq Anoaoda Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: used, Year of construction: 1974, spindle diameter 90 mm x-travel 1000 mm y-travel 1200 mm z-travel 1200 mm feed movement 710 mm spindle taper ISO 40 turning speed range 8 - 1600 U/min table-size 1120 x 1000 mm table rotating 360 ° table load 2,5 t total power requirement 11 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 3,3 x 3 m separate switchboard, Bsdpjtv Ibdefx Aaajda rapid traverse some tool holders, without facing plate, without steady rest,

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault Bdedpfx Aetv H Ucsaaja in the electrical system.

Condition: used, machine/vehicle number: 008088, X axis working area: 3700 mm Y axis working area: 2100 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 14 Bodpfx Aasx A Hbqsaeda

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 878 40013, clamping force: 2,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Bodpfxsxtmp Ne Aaaeda

Condition: used, machine/vehicle number: 007686, X axis working area: 3765 mm Bdsdpfx Aeu Tliyoaaea Y axis working area: 1560 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 18 Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 005289, X axis working area: 7400 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 10 Total number of tool changer positions: 14 Bdedpowcyacofx Aaasa

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Bdedpfx Aasu N Skfjaja Y axis working area: 2245 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 8

Condition: new, functionality: fully functional, Spare parts for machines manufactured in Poland. FUM Poreba FAT Wrocław AVIA Warszawa Jafo Jarocin ZM Tarnow Tarnow DEFUM Dabrowa Gornicza FAMOT Pleszew Spare parts for Polish lathes, including: TUM 25, TUM 35, TUJ 50, TUJ 63, TUJ 560, TUJ630, TUR 50, TUR 63, TUR 560, TUR 630, TPK 90, TRP 93, TRP 110, TR 115, TR 135. Spare parts for Polish milling machines, including: FND 25, FND 32, FND 40, C20, D36, D40, FF series, FR series. Bdedpfxoum Ixxs Aaaea

Condition: excellent (used), Year of construction: 2014, Polishing Machine for Furniture Fronts – Emme Elle Model 1350 For sale: Industrial polishing and buffing machine by Emme Elle, model 1350, ideal for furniture manufacturing plants, joineries, and spray shops. The machine is designed for the automatic processing and finishing of furniture fronts, lacquered panels, polyurethane coatings, and other surfaces, ensuring a smooth, even, and high-quality finish. — 📌 Key Product Features • Manufacturer: Emme Elle – a renowned brand in the Italian and European woodworking machinery sector. • Model: 1350 – working width up to 1350 mm, ideal for furniture fronts and large panels. • Condition: negotiable (used, in working order) – detailed information available upon request. • CE compliance: yes. — 🛠️ Technical Specifications Bedpfx Asyk Dfwsaaoda • Working width: approx. 1350 mm – suitable for wide fronts and panels. • Table dimensions: approx. 1350 × 3200 mm. • Polishing components: – 4 rotating shafts with Ø 350 mm cotton discs, – 4 polishing drums Ø 180 mm. • Wax distribution system: automatic module for the application of polish/wax compound. • Motors: multimotor configuration ensuring power and stable operation. • Suction/de-dusting system: efficient extraction unit for dust and debris, improving finish quality. — ✅ Applications The machine is dedicated to polishing and finishing furniture fronts, lacquered and veneered panels in production lines. Suitable for: • joinery and furniture manufacturing plants, • spray shops and finishing departments, • serial production as well as individual elements. It ensures uniform, high-quality surface finishes, reducing operator time and increasing production efficiency.

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 1737522032, Infinitely height-adjustable and lockable saw head with splash guard. Lateral handwheel feed for convenient operation. Removable water tray, easy to clean. Crane lugs for easy relocation on the construction site. Bdsdpfxow Rnzcj Aaaja

Condition: used, machine/vehicle number: 008170, X axis working area: 4300 mm Y axis working area: 2250 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Bjdpfxjx A Tcuj Aaaeda Total number of drilling spindles: 12 Total number of tool changer positions: 14

Year of construction: 2025, condition: as good as new (ex-display), With 250 mm diameter of grinding wheel - new equipment / demo unit for special price - this machine is a standard machine for manual preparation - optional we offer a specimen mover – please ask for details Machine ready for use: - basic machine disc diameter 250 mm - 250 mm platic grinding table - splash guard - disc cover - connections for cooling water & water drain Bdsdpfjptc Dsx Aaaea Optinonal: grinding paper, diamond grinding discs, polishing cloth, diamont suspensions inclusiv delivery by forwarder (Germany) delivery outside Germany on request offer not binding - subject to prior sale