Used Tapping Profile for sale (6,624)

Condition: excellent (used), Year of construction: 2006, 1 x Profile Projector Tesa Scope 300 V Year of manufacture: 2006 Technical Data: Screen diameter: 300 mm Rsdpfexl Uliox Ab Rsch Magnification: 10x + 20x Travel paths: X: 200 mm Y: 100 mm Resolution: 0.001 mm Further technical data to follow. The projector can be inspected under power at any time.

Condition: good (used), Drilling capacity: up to 10 mm Spindle mount: drill chuck Speed range: Diameter pulleys Motor side: Spindle side: 38; 48; 66; 78 mm 90; 104; 120; 133 mm Motor speed: 800 rpm stroke: 100 mm Rcjdpfx Ash Hrkiob Roh throat: 300 mm table: 400 x 400 mm distance table - drill chuck max: 580 mm distance table - drill chuck min: 130 mm table: 400 x 400 mm footprint: 750 x 480 mm total power: 0,4 kW accessories/equipment: drill chuck Condition: good weight: 170 kg dimensions: 750 x 480 x 1.450 mm

Condition: like new (used), Manual profile grinder UTMA model P20 Rsdpfxjff H E Rj Ab Roch

Condition: used, Minimum wire diameter: 3.0 mm Maximum wire diameter (depending on tensile strength): up to 6.5 mm at ≤1600 N/mm² Rcsdpexr Ncvofx Ab Rsh up to 7.5 mm at ≤1200 N/mm² up to 10.0 mm at ≤800 N/mm² up to 13.0 mm at ≤600 N/mm² Maximum wire feed speed: approx. 40 m/min Wire feed length: unlimited (limited only by part length and space) Maximum coil diameter (closed ring): 1000 mm Distance from bending head center to machine front panel: 1000 mm (working depth) Minimum distance between two bends: ≥ 3 × wire diameter Power consumption: up to 18 kW (peak), approx. 10 kW (typical operation) Compressed air pressure: 6 bar Compressed air consumption: 1–30 L/min (depending on configuration) Machine weight: approximately 7500 kg

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Redpfx Aexizanjb Roch

Condition: used, Table threading machine M1 - M10 Height adjustment via toothed rack and hand crank, motor 0,22+032 kW motor rpm 1420/ 2770 spindle Upm 480 - 580 Weight 100 kg Tapping chuck with key Redoda I E Djpfx Ab Rsch Under table Connection cable with 16 A CEE plug

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1222021152, travel distance X-axis: 3,500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 280 mm, Rational machining of aluminum, plastic and steel profiles Rodpfx Absw Tm Rho Rsch 3-axis control - Working length 3500 mm Continuous clamping area allowing for clamping of profiles up to 7 meters long with roller conveyor support. - Simple graphic operator guidance. - Automatic control of clamping position. - Automatic measurement of profile length - 1-circuit clamping system. - Continuous bed surface. - Complete machining of profiles that are in a stationary state prevents damage to the profiles. - Fast positioning of the machining unit (up to 50 m/min.) in the x-axis ensures a robust drive with minimal wear - Highly dynamic servo drives with measuring device and digital servo controller. - Electronic 3-axis industrial PC control, color screen and floppy disk drive for online connection, barcode scanner. Network connection R3 45 10/100 Mbit - Machine number: 1222021152, year of manufacture 2007 Machining length: standard 3500 mm Milling range X-axis: 3500 mm without end face machining Milling range Y-axis: 350 mm Milling range Z-axis: 280 mm Rapid traverse Y-Z: max. 30 m/min. Rapid traverse X-axis: max. 50 m/min. Positioning accuracy: +/- 0.1 mm Milling speed: 1 – 21000 1/min. Milling power: 6.0 kW S6 Tool changer We can offer professional assembly and operator training

Condition: used, for sheet thickness up to: 7 mm Rcededp U Apopfx Ab Reh blade length: 175 mm Round material up to: 20 mm square material up to: 18 mm space requirement: 1000 x 770 x 690 mm hand-guided

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, CNC surface grinding machine and profile grinding machine Elb Grinding length 600 mm Redpsvt Rbaofx Ab Roch Grinding width 400 mm Grinding height 475 mm Table load 650 kg Table clamping area 960x 400 mm Longitudinal table stroke up to 700 mm Vertical feed max. 1200 mm / min. Resolution 0.001 mm Cross travel max. 370 mm Cross feed max. 1500 mm/min. Incremental position measuring system, glass scale Resolution 0.001 mm CNC CONTROL UNIcon "U" Further technical data on request

Condition: good (used), Year of construction: 1984, CNC Optical Profile Grinding Machine Redpfx Absp R Rm Ij Rsch Wasino GLS-130AS 1984

Condition: new, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - Lower two rollers are moved hydraulically - Three rollers driven - Hydraulically adjustable guide rollers - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation Rsdpfxog Sr I Ue Ab Rsch - 400V

Year of construction: 2012, condition: ready for operation (used), An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China. Rjdpfx Aboxfknaj Rech

Condition: good (used), Year of construction: 2011, machine/vehicle number: MS 1153, Offer 23158 Technical data ca : - passage to blasting chamber B 370 x 170 mm - blasting nozzle - Door opening to blasting chamber - Blasting material pressure vessel - blasting material recovery - separate control panel - space requirement blast machine 1600 x 2000 x H 1750 mm - space requirement blasting material container 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume 700 - 1500 m³/h - Suction fan 3 kW - space requirement filter unit 1600 x 1600 x H 3250 mm - mot. driven inlet roller table 4 m - roller table without drive 3 m - roller width approx. 800 mm Rcjdjllvr Depfx Ab Rsh - roller table height approx. 700 mm

Condition: good (used), for spindle taper: MK 3 Drilling Ø: 10 mm Redpfx Aed R Atcjb Rech Thread cutting: M 5 / M 8 min./max. Spindle distance: 35/120 mm Case diameter: 170 mm Case length: 218 mm weight:

Condition: good (used), Year of construction: 2001, machine/vehicle number: 443954701005, Offer 25086 Hydraulic profile and bar steel shears with notching device and hole punch Technical specifications: - Flat steel shears - Flat steel - 400 x 120 mm Rcsdpfx Absv I Sxvj Rjh - or: 300 x 22 mm - Section steel shears - L- and T-bars at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notcher - With square notcher for sheets up to approx. 13 mm - Notching depth approx. 70 mm - Notching width approx. 52 mm - Hole punch - Punching force approx. 100 t - Throat 510 mm - Stroke approx. 10 to 50 mm - Punches in steel up to Ø 31 mm in 25 mm - Electric contact stop - Various 10 punching dies + Dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Condition: used, Field of view on the objective at 50 x: 11.2 x 9.2 mm Field of view on the objective at 100 x: 5.6 x 4.6 mm Projection area: 560 x 460 mm Rodpeb Nxl Iofx Ab Rech Objective stage size: 230 x 165 mm diameter of the glass table: 80 mm Weight approx.: 230 kg Space requirement: 1030 x 780 x 1800 mm

Condition: good (used), Offer 22188 Rsdpfjwcphcox Ab Rsch Technical specifications: - Height-adjustable roller conveyor with spring support and locking mechanism - With clamping lever - Roller conveyor length approx. 3000 mm - Min. roller conveyor height approx. 640 mm - Max. roller conveyor height approx. 1190 mm - Outer roller width approx. 260 mm - Roller diameter approx. up to max. 100 mm - Max. possible number of rollers: 13 - 10 rollers are installed - Total width of the roller conveyor approx. 500 mm - Total length approx. 3200 mm - Weight approx. 250 kg

Year of construction: 1973, condition: used, machine/vehicle number: 8530, screen size: 500 x 500 mm visual field: 100 mm Ø dimensions: 620 x 1020 x 1650 mm Rcodpfx Aj T Apysb Rjh weight: approx. 250 kg

Condition: good (used), Year of construction: 2001, machine/vehicle number: 152279, Offer 25253 Technical specifications: - Tapping capacity up to M 20 Rcedpjxc Uz Eefx Ab Reh - Drilling capacity in steel 30 mm - Drill spindle taper MK 3 - Drilling depth 120 mm - 10 spindle speeds 120 - 2160 rpm - Drive 400 V / 0.7 / 1.3 kW - Table size 390 x 420 mm - Distance spindle/table approx. 220 - 600 mm - Spindle arm reach/column 260 mm - Table stand - Required space approx. W 550 x H 1900 x D 800 mm - Weight approx. 300 kg

Year of construction: 1998, condition: ready for operation (used), machine/vehicle number: 2131, Max. pressure: 55 kN Throat: 175 mm Adjustable punching stroke: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Notching stroke adjustable: 0 - 60 mm Rcjdsnacy Tjpfx Ab Rsh Hydraulic drive: 380 V, 3 kW Floor space required: 1170 x 620 x 1470 mm weight: 930 kg

Year of construction: 2000, condition: good (used), Offer 20158 Technical data: - Tapping capacity up to approx. M 16 - Tapping depth approx. 75 mm - Drill feed down + up infinitely variable Rodpfx Abepvkm To Roch - throat depth 90 mm - Spindle speed up to 290 rpm - Pneumatic connection with pressure reducer 6 bar - Pneumatic foot switch - drive 400 V / 0,75 kW - Space requirement approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg

Condition: excellent (used), Year of construction: 1978, Screen size: 300 mm Large field of view at 5x magnification: 60 mm Nosepiece with objectives: 50, 10, and 20 x Coordinate table size: 285 x 150 mm Table travel in x, y, and z axes: 50 mm each Electrical connection: 220 V Space required: 720 x 650 x 825 mm Rcjdpsv I Tcisfx Ab Reh

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5890, Offer 25118 Technical specifications: - Tapping capacity approx. M 3 - M 8 - Working range (swivel radius) approx. 1800 mm - Multi-position head - Speeds 8 - 700 rpm - Quick-change tool holder size 1, diameter 19 mm Rcodpfxjwmnhps Ab Roh - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space required approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg

Condition: good (used), for sheet thickness up to: 8 mm flat iron: 80 x 12 mm square iron: 20 mm Rjdpfx Aetx Uqaeb Rjch round iron: 18 mm weight approx.: 88 kg space required: 620 x 250 x 380/880 mm high (with/without base frame)

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0168091277886, Offer 23294 Hydr. combined flat and profile steel shears with notching device and hole punch Rcsdpfxjrll I Uo Ab Rjh Technical data: - Flat steel shears - blade length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm - Profile steel shears - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Steel bar shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Hole punch - Punching force approx. 750 KN - Infinitely variable stroke 0 - 70 mm - punches holes in steel up to 30 mm Ø in 20 mm - throat 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - with: - 2 E. foot pedals for two separate work stations - Turntable