Used Testing Machine for sale (96,178)

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The resonance test bench POWER SWINGLY BigTable is designed as a two-mass oscillator. It consists of an oscillating head excited by a frequency-controlled asynchronous motor using an unbalance motor, which is arranged in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned helical compression springs on the upper crossbeam and is guided centrally. The medium-load drive is arranged in the lower part of the machine and applies the static preload with the help of a gear motor via a spindle drive. The sample space is located above the clamping table and is limited at the top by the adjustable crossbeam. The test bench is controlled by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical data: General data test bench: Total height of test bench 1840 to 2240 mm Height of machine table 1030 mm Width of test bench 800 mm Depth of test bench 1500 mm Height of sample chamber max. 600 mm (without force transducer) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum vibration path ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of test bench approx. 1880 kg Max. weight of clamping device 150 kg General data Control cabinet: Total height of control cabinet 1900 mm Height of table top 1080 mm Width of control cabinet 650 mm Depth of control cabinet 700 mm Weight of control cabinet 152 kg Nljdpfx Ahevx Su Se Eoh Color RAI 9006 (white aluminum), table top midnight Conditions for the installation location: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load capacity 170 N/cm² Power supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, 2-pole, 16 A Fuse 16 A Connection and ambient conditions Mains conditions: Voltage 400 V rotating current with ΜΡ conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-term dips < 20 ms Limits for continuous interference Radio interference level A according to VDE0871 Frequency 50 Ηz ± 1% Protective earth Earthing resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), max. wheel diameter 350 mm gear width 400 mm max. module 15 min. module 0,15 Nedpfsxqrhxsx Ah Eslh Control Klingelnberg workpiece weight 300 kg ical angle 0 - 90 ° centre distance 1000 mm weight of the machine ca. 1,9 t dimensions of the machine ca. 2,3 x 1,8 x 2,4 m Fully automatic CNC-controlled gear measuring center for spur gears and other gears depending on the software. Equipment for internal gears. Software: - Spur gear, hob measuring, worm checking

Condition: used, Year of construction: 2005, Lot consists of: (1) Tire Testing Machine Technical details: Nodpfx Ahjxf Avis Eolh Test wheel: 67", max. speed: 320 km/h, max. load: 2,500 kg, camber angle: 0–5° (2005)

Condition: used, The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies for noise and contact pattern testing on bevel and hypoid gears. Technical Data • Diameter: 540 (400) mm • Hypoid: ±50 mm • Pinion spindle diameter: 90 mm • Dimensions (LxWxH): 1,800 x 1,800 x 1,600 mm • Machine weight: approx. 2,800 kg *Information and data are provided without obligation. Subject to prior sale. Special Features: The machine is intended for noise and contact pattern testing on bevel and hypoid gears of all gear types. By simulating operational conditions, applying various rotational speeds, and switching load states between drive and coast, the optimal installation distance for standstill can be determined. • Digital actual value display for 2 axes Nledsxpq Nlopfx Ah Eoh • Infinitely variable speed adjustment via frequency inverter • Electrically secured and removable safety guard • Accessories: Large number of workpiece holders • Condition: Very good

Condition: used, functionality: fully functional, Year of construction: 2009, 1 Universal Testing Machine Type H 10 KM Used device with Windows 11 software for tensile, compression, and bending tests; comes with one pair of wedge grips up to 10 kN and a certificate for tensile and compression displacement measurement. For testing in tension, compression, shear, bending, etc. • This is a dual-spindle benchtop model. • The machine complies with DIN 51220 and 51221, Class 1. • Digital display for force and displacement, 4½ digits, with peak value memory. • Five-range automatic switching for force and displacement measurements. • Digital speed adjustment from 0.5 to 1000 mm/min in increments of 0.1 mm. • Break detector and automatic return function are standard features. • Driven by a precision servo motor with high-frequency chopper control unit and digital feedback for load-independent, constant speed. • Quiet operation thanks to toothed belt drive and ball screw spindles with bellows cover. • Fully computer-controllable via RS 232 interface. Max. load: 10 kN in tension and compression Max. travel: 1150 mm without grips Force measurement: Strain gauge Measurement principle: Temperature-compensated Displacement measurement: Built-in optical encoder, 0.01 mm resolution Power supply: 220-250 V, 50-60 Hz Power consumption: 1.0 kW Dimensions: Height 1575 mm, Width 635 mm Clear width of frame: 410 mm Weight: approx. 95 kg Nlsdpfx Aoxghlfoh Ejh Includes: 10 kN load cell and certificate for force and displacement.

Year of construction: 2021, condition: used, max. clamping length: approx. 60 cm, with darkening cabin Nsdpfexnahhjx Ah Ejlh

Condition: excellent (used), Zwick/Roell Zwick/Roell 1456 RetroLine Universal Testing Machine 20 kN For sale is a high-quality universal testing machine from the renowned manufacturer ZwickRoell, model 1456 RetroLine, year 2023, with a nominal force of 20 kN. Nsdpfx Ahjw U N Rte Eolh The machine was completely upgraded to state-of-the-art technology as part of the RetroLine modernization and is ready for immediate use. The machine is in very good condition, has been modernized, and complies with all current standards. It is ideally suited for tensile, compression, bending, and shear tests in research, development, and quality assurance. Technical data: Make: ZwickRoell Model: 1456 RetroLine Year of manufacture: 2023 Nominal force: 20 kN Test space dimensions: Height 900 mm, Width 420 mm Drive: Electromechanical spindle drive Speed range: 0.001 – 1000 mm/min (depending on model) Measurement accuracy: ± 1% according to ISO 7500-1, Class 1 (optionally 0.5) Control system: testControl II Software: testXpert III Equipment: Replacement head Cabinet (protective / soundproofing) Evaluation unit included For the ZwickRoell 1456 RetroLine with 20 kN, the approximate values (depending on configuration and equipment, e.g., cabinet, evaluation unit) are as follows: Dimensions Overall height: approx. 1.8 – 2.0 m Width: approx. 600 – 800 mm Depth: approx. 600 – 800 mm Test space (installation height/width): 900 mm × 420 mm Weight: Base machine: approx. 250 – 350 kg With cabinet and evaluation unit: up to approx. 400 – 450 kg Condition: used Scope of delivery: (see picture) - Zwick/Roell 1456 RetroLine testing machine (20 kN) - Protective / soundproofing cabinet - Interface card for force transducer - Operating and technical documentation (PDF & printed) Inspection by arrangement possible. Shipping or collection by arrangement. (Specifications and technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: defective spare-parts repository (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: Frenco URM-K Typ HGM 38101, For sale here is a Frenco gear measurement machine URM-K (Universal Rotational Measurement with Measuring Balls), type HGM (Horizontal, Counter-Centre, Manual) from the year 2000. The device has been out of operation for a long time. When powered on, the error 'A disk read error occurred' appears. Price is negotiable. Nljdpfx Ahexli Acj Eoh

Condition: used, Year of construction: 2012, Lot consists of: (1) Tire Testing Machine Technical Details: Test wheel: 2 m, V/MAX: 350 km/h, max. load: 2,500 kg, camber angle: 0–6° (2012) Nedpfoxf Awmex Ah Ejlh

Condition: used, Universal Static Material Testing Machine AllroundLine with Two Test Spaces Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type 1474 / 01 Year of manufacture: 1984 / 2003 Type: 01 . 96255/03 . 112137 Design: Universal Testing Machine Test force: 100 kN (10 t) Test area height: 1460 mm Test area width: 430 mm Traverse path max.: 1200 mm Test speed max.: 250 mm/min Power supply: 400 Volt, 50 Hz (L1/PE/N) Rated current: 10 A Motor power: 4.4 kW Interface: RS485 - Control system retrofit in 2003 - For tensile, compression, and bending tests on material samples, components, and assemblies - Data output via RS485 - 1 load cell for measuring compressive and tensile forces included. The machine is sold without PC and software; only the installed load cell is included in the scope of delivery. Required floor space (W x D x H): 1150 x 800 x 1960 mm Weight: 820 kg Good condition Nljdpfx Ahjxantco Ejh

Year of construction: 2024, condition: new, machine/vehicle number: H3000-H5000TM, Universal testing machine H3000TM-H5000TM according to DIN EN ISO 7500 The universal testing machine of the H3000TM-H5000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor controlled and has a membrane keypad. The 2-line LCD display shows the force and travel. The testing machine can be used as standalone or with a PC via USB interface. The displacement is measured by means of an encoder 0.01 mm visible resolution on LCD Nljdeiq Hxkepfx Ah Esh (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travels, 500mm or 1200mm (without load cell and testing tool). Further scope of delivery: One load cell up to nominal load, 220 Volt cable, USB cable, description, CE declaration of conformity. For more information, please refer to the attached description. Load cell 3000N-5000N Measuring range: 5-5000N tension and compression, with nom. 2mV/V output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate Long travel extensometer HE 900mm measuring travel, measuring arms motorized, including electronics Accuracy class class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optical incremental Measuring path 900 mm , minus measuring length Display error 6 µm or 2 Resolution 1 µm Actuating force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo adjustment is manual Measuring arm opening and closing is motorized specimen diameter 0-30 mm specimen thickness 0-30 mm sample width 0-100 mm Weight approx. 32kg Scope of delivery strain gauge complete with electronics Cutting edges round: 1 set each carbide / rubber wear parts measuring blades optional rectangular cutting edges ATTENTION: When using optional cutting edges a readjustment of the lo a readjustment of the lo stop is necessary.

Condition: ready for operation (used), Scales: Rockwell/Rockwell Superficial, max. workpiece height: approx. 180mm, max. test depth: approx. 165mm, dwell time: approx. 3s, data output: Digimatic/RS-232-C, machine dimensions X/Y/Z: approx. 250mm/520mm/780mm, weight: approx. 50kg. Documentation available. An on-site inspection is possible. Njdexc Niwspfx Ah Eolh

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a high-quality materials testing machine, model Zwick/Roell Z010 TN ProLine (BT1FB010TN.D30), supplied with comprehensive equipment. This system is ideally suited for tensile, compression, bending, and component tests and is offered with original Zwick software, accessories, and safety screen. Complete system Including safety screen (CE-compliant, with electric interlock) Comprehensive accessories and software included Technical data of the testing machine: Model: Z010 TN ProLine, nominal force 10 kN Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guidance, very low noise emission High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Including interface card for force transducer (additional slot available for expansions) Expandable with options and modules Safety – Safety screen (included in delivery): Suitable for ProLine Z005TN, Z010TN, Z020TN Nsdpfsw Uifdex Ah Eelh With electric interlock and additional manual locking Makrolon pane, 6 mm thick, pivoting (hinged left) CE-compliant Mandatory for applications with risk of operator injury Force transducer: Xforce HP force transducer, nominal force 10 kN Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely good linearity (

Condition: excellent (used), Year of construction: 2003, max. wheel diameter 600 mm gear width 700 mm max. module 20 min. module 0,5 Nledpfx Ahswyxycs Esh table diameter 300 mm x-travel 300 mm y-travel 600 mm z-travel 700 mm workpiece weight 300 kg Control Zeiss max. workpiece diameter 600 mm clamping length 20 - 1000 mm ical angle 90 ° total power requirement 2 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 3,0 x 2,0 x 2,4 m Form measuring machine, gear measuring machine, coordinate measuring machine -> Primar MX 4 WL Suitable for gear shafts, sprocket waves, gears, pistons, gearbox, connecting rods, camshafts and crankshaft, crankshaft housings, cylinder heads, ... Air suspended, centering and tilting table, retention, highly precise execution! Software: gear, roller milling, piston, bowling wheel, crankshaft, connecting rods New software update 2014!

Year of construction: 2025, condition: as good as new (ex-display), Stand-alone machine, max. testing force 200 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, Machine price WITHOUT clamping device as the final equipment is based on your requirements: included in the price: - Machine in working order - incl. load cell 200 kN (grade 05 from 2000 - 200,000 / grade 1 from 400 - 2000 N - Warranty 24 months - Software LabTest - meets and exceeds all expectations - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - Mechanical clamping device Njdpecyamwjfx Ah Ejlh - Hydraulic clamping tool - Bending tools - Druckplatten plates - Clip-on extensometer - Probe arm extensometer - Video extensometer - Laser speckle extensometer - Climate chambers - High temperature / hot draft furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Condition: used, Static Universal Testing Machine AllroundLine with two test chambers Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type AllroundLine Z010 / TH2S Year of manufacture: 1996 Model: BZ010TH2S . 132583/96 . 406678 Design: Benchtop testing machine Test force: 10 kN (1000 kg) Test chamber height: 1458 mm Test chamber width: 440 mm Crosshead speed: mm/min Drive travel resolution: 0.0625 µm Repeatability accuracy: ±2 µm Motor power: 500 W Power supply: 230 Volt, 50 Hz Rated current: 3 A Power consumption: 800 VA Interface: RS485 - For tensile, compression, and bending tests on material specimens, components, and assemblies - Equipped with TH2S control unit (machine controller) - Data output via RS485 - 1 piece load cell for measuring compression and tensile forces, AST Type KAF-W (Angewandte System Technik GmbH, year 2013) The machine is sold without PC and without software, only the described load cell is installed. Nlodpfxsxanrxo Ah Eoh Space requirement (W x D x H): 1000 x 650 x 1920 mm Weight: approx. 220 kg Good condition

Year of construction: 2024, condition: new, Universal testing machine H50TMCI / 900 Watt mechanical construction: according to DIN EN ISO 7500-1) 2 backlash-free ball screws, drive via AC servo motor, Fmax = 50 kN, stiffness 65 kN/mm 1 working area up to nominal load: working area width: 510 mm (optional widening: +240mm / +530mm) max. test stroke without test tools, adapter and KMZ: 1095 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 800 mm/min at full load Return speed 800 mm/min Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time Nlsdsiq Hxcjpfx Ah Esh The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z0.05 Type: BT1-FRO.5TS.D14 with testXpert II V3.0 software Zwick/Roell zwicki Z0.5 TS Materials Testing Machine 0.5 kN Professional materials testing machine for tensile, compression, flexure, and component testing. Fully equipped with testControl electronics, testXpert II software, accessories, and PC workstation. Technical specifications of the testing device Model: zwicki Z0.5 TS Rated force: 0.5 kN (500 N) Max. test space height: 573 mm Test speed: 0.001 – 2000 mm/min (optionally up to 3000 mm/min) Online machine compliance correction for maximum accuracy Adaptive controller for force and strain control High precision and real-time data processing Modular expandability: 2 module slots (optionally up to 4) Clamping range flexibly adjustable Xforce P force transducer Type: Precision Rated force: 500 N Accuracy class 1 as per ISO 7500-1 from 2 N Accuracy class 0.5 from 10 N Insensitive to lateral forces, bending/torsion moments Nlsdpfx Aew Uf Uzoh Ejh Rugged design, overloadable up to 150% of rated force Incl. calibration certificate according to ISO 7500-1 Software – testXpert II Includes basic program in German Easy operation on Windows XP/Vista (compatible with standard PCs) Integrated simulation mode (Virtual Testing Machine) Statistical analysis & tolerance monitoring Accessories Unit for tack-loop test Fmax 500 N Fixture for adhesive tapes Glass plate 25 x 30 mm (FINAT Test No. 9) incl. mount Screw specimen holder Type GRS500 PL Fmax 500 N Max. opening width 21 mm Incl. Vulkollan jaws, Ø 32 mm PC & Workstation HP DC7800 Midi Tower incl. Windows XP Pro (German) Intel Core 2 Duo E6750, 2 GB RAM, 160 GB HDD DVD drive, Gigabit Ethernet, multiple USB/serial ports 19" LCD monitor (1280 x 1024), keyboard & mouse testXpert II software preinstalled Dimensions (W x D x H): approx. 450 × 450 × 1200 mm Weight: approx. 60 kg (without PC and accessories) Condition: used Scope of delivery: (see image) Zwick/Roell zwicki Z0.5 TS materials testing machine (0.5 kN) Xforce P force transducer (500 N, incl. calibration certificate) testXpert II software (basic program, German) Accessories: tack-loop test unit, glass plate with mount, screw specimen holder GRS500 PL PC workstation with monitor, keyboard, and mouse Documentation in German (Specifications and details subject to change and errors!) We are happy to answer further questions by phone.

Year of construction: 2025, condition: as good as new (ex-display), Max. testing force 50 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results (demo machine for special price) Nodpfx Ajptcmjh Eelh The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 50 kN (quality class 0.5 from 500 - 50000 N) - warranty 24 month - software LabTest - unique performance - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. Setup, training and DAkkS calibration Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices!

Year of construction: 2024, condition: new, Universal testing machine H 5 TMNI ( L ) 250mm Extended mechanical construction: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screws, brushless drive motor, Fmax = 5 kN, rigidity 9.4 kN/mm 1 work area up to nominal load: Working area width: 420 mm max. test stroke without test tools, adapter and KMZ: 1270 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1325mm Travel speeds: Test speed 0.001 - 1200 mm/min up to nominal load Nlodeiq Hxvepfx Ah Eeh Return speed 1200 mm/min Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) in accordance with DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is supplied with a factory test certificate. If a factory or DAkkS calibration is carried out at the installation site at the customer's request, this must be charged separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of traverse position Resolution of the crosshead travel measurement:

Condition: excellent (used), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Material Testing Machine – Precise Strain Gauge Testing Note: PC not included!! Highlights: - Test force: 50 kN (tension/compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth - Low noise: 59 dB(A) - Ambient conditions: +10 to +35 °C, humidity 20–90% Special features: - Ideal for research, development, or industrial material testing Dimensions & weight: Load frame: - Test force (tension/compression): 50 kN - Load frame height: 1,714 mm - Overall height: 1,814 – 2,688 mm - Load frame width: 760 mm - Overall width: 936 mm - Load frame depth: 477 mm - Overall depth: 722 mm Weight: - With electronic unit: 230 kg - With typical accessories: approx. 300 kg Nljdpjw S Hvzefx Ah Ejh Condition: used Scope of delivery: (see picture) - ZwickRoell BT1-FR050TH.A1K testing machine - Operating manual (Specifications are subject to change and errors excepted!) If you have any questions, we are happy to answer them by phone.

Year of construction: 2025, condition: as good as new (ex-display), Max. testing force 10 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 10 kN (quality class 0.5 from 100 - 10000 N) - warranty 24 month - Software LabTest - unsurpassed flexibility, meets and exceeds your expectations - without clamping heads (as option) - without costs for delivery (depending on distance) Nljdpfsdb Nf Ijx Ah Esh - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices! Photos shows machine with optional equipment!

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: H50KS, tractive force with load: 50,000 N, Universal testing machine, type H50kS up to 50KN for tension and compression Load cell 50KN 10KN 1KN and Windows software 8-9-10-or 11 for tension, compression, bending, shear etc., according to EN ISO 7500-1, ASTM E4 The H50kS is a universal testing machine developed according to the latest standards. The machine operates in accordance with the relevant radiation protection and safety directives in the EC. (EN 50081-1, 72/23/EEC, EN 61010-1) The maximum voltage within the machine is 48 volts. Special features - large, easy-to-read liquid crystal display with backlighting - Graphical or numerical display mode - alpha-numeric file input - speed range 0.001 to 500 mm/min. - high return speed 0.001 to 500 mm/min. - exact crosshead positioning - Robust load frame Nledpfx Aoq Ruw Njh Ejh - Output report of results with mean value and standard deviation via printer - Large selection of test software under Windows for various standards - RS232 interface mode for use with computer system - Accuracy of load cell force display 0.5 % over the entire range - Displacement display accuracy 0.001 mm - Equipped with a force and displacement alarm system - 32bit motor controller - 20% digital weight blanking during load cell capacity check - Automatic motor alarm in case of over or under voltage and overheating Specifications: - Force measurement accuracy +/- 0.5 % of the displayed force in the range 2% to 100% - Accuracy of position measurement +/- 0.01 % or 0.001 mm - Speed accuracy +/- 0.005 % of the selected speed - Operating temperature 0 to 38°C - Humidity range 10% to 90% Technical data: - Two-spindle table model - maximum load 50kN in tension and compression - maximum stroke 1100 mm without clamping fixtures - for further details please refer to the brochure Dimensions: Height: 1613 mm width: 720 mm Depth: 500 mm Weight: 140 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Condition: good (used), Zwick Type: BT2-FZ0.5TS.D16 500 N + Xforce P 500N Materials Testing Machine Test force in tension/compression: 500 N Overall height, without head traverse: 789 mm Overall width: 411 mm Overall depth: 622 mm Footprint: Net standing area: 0.008 m² Load frame base area: 0.196 m² Specific floor load: Based on typical equipment: 0.85 kg/cm² With 50% safety margin: 1.28 kg/cm² Ceiling load: Based on typical equipment: 97 kN/cm² With 50% safety margin: 146 kN/cm² Nedpow Ib Uwsfx Ah Eolh Working space depth: 105 mm Working space height with upper mounting bracket: Minimum height: 235 mm Maximum height: 565 mm Working space height with lower mounting bracket: Minimum height: 90 mm Maximum height: 420 mm Weight: approx. 78 kg with extras Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications are reserved!) We are happy to answer further questions by phone.

Year of construction: 2024, operating hours: 4 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN 1 working chamber up to nominal load: Working chamber depth: 105 mm max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load return speed 1200 mm/min Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement: Nsdpfomdn Trjx Ah Eelh