Used Thermoform for sale (145)

Year of construction: 2019, condition: new, machine/vehicle number: BI3, Annealing furnace for stress-free annealing and forming of acrylic glass The furnace has two doors on one side and two narrow doors with a rail system on the rear side. The sheets are hung in there and pneumatically clamped and released using a foot pedal. - The furnace has a maximum temperature of 230°C and a permanent deviation of approximately +/-3°C from the set temperature at 75°C. Hnodpfx Abjb Nzycoror - The internal dimensions are approximately 1600 mm wide x 2000 mm deep. In terms of height, the furnace can accommodate a 1800 mm high sheet hanging freely within the rail system. - The rail system can be seen in the attached images. The rail system can also be mounted on the front side. It can accommodate sheet thicknesses from 1.5 to 25 mm and support a sheet weight of up to 150 kg. - The power can be adjusted in several stages. - Air circulation of approximately 3,000 m³/h - For safety reasons, the doors can also be opened from the inside. - Safety device that also shuts off the heating in the event of a fan failure.

Year of construction: 2005, condition: used, functionality: fully functional, The deep-drawing machine is an automatic machine for forming, filling, and sealing. Its modular design is a key feature. These modules are arranged one after the other, in the sequence of operations. They are designed as independent units and can be exchanged within a given model series. tel. 694429279 Hnjdpfsy Txcqox Abrjr

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, Tria Model: 70 kW Condition: ready for operation (used) RIA S.p.A. Ideal for medium-to-high throughput applications. Designed for efficient inline or standalone size reduction of sheet, cups, profiles, and other plastic waste. Construction: Built-heavy-duty, suitable for inline integration under thermoformers or as standalone units. Hodpfewnx H Sjx Abrenr

Condition: refurbished (used), Year of construction: 2011, The Multivac R535 forms packs directly from the bottom film, shaping them to match the dimensions of the product being packed, then fills and seals them with top film under vacuum or modified atmosphere (MAP) conditions, significantly extending product shelf life. The entire process — forming, filling, sealing, and cutting the packs — runs continuously on a single production line, delivering high packaging throughput while maintaining consistent pack quality. According to the nameplate data, the unit on offer dates from 2011 and was manufactured to Multivac’s German quality standards. The machine is additionally equipped with an MR625/MR6318 Cross Web Labeller, manufactured by MR Etikettiertechnik GmbH & Co. KG of Enger. The unit provides fully automatic cross web labelling with high-precision label placement across the sealing film and is integrated with the machine’s sealing system, eliminating the need for manual labeling and speeding up the entire packaging process. Key advantages of the Multivac R535 The Multivac R535 enables both vacuum and modified atmosphere (MAP) packaging, extending the shelf life of packed food products while preserving their freshness and quality during transport and storage. A film width of 530 mm and a stroke of 360 mm support pack formats up to 160 x 120 mm, and the machine can be flexibly reconfigured for different formats depending on the mold in use. The robust, industrial-grade construction from this German manufacturer, together with Multivac’s proven technology, ensures reliable operation and highly consistent packaging quality — a key factor for plants running high-volume food production. An additional advantage is the integrated MR625/MR6318 Cross Web Labeller (Multivac Group – Marking & Inspection), combining fully automatic cross web labelling with high-precision label placement and integration with the sealing system, which reduces the amount of manual work on the packaging line and streamlines the labeling of finished packs. Technical specifications of the Multivac R535 Manufacturer: Multivac Machine type: Roll-fed thermoformer (Verpackungsmaschine) Model: R535 Machine number: 140005 Year of manufacture: 2011 Power supply voltage: 400 V Frequency: 50 Hz Number of phases: 3/N/PE AC Rated power: 27 kW Rated current: 67 A Maximum protection (fuse): 80 A Film width: 530 mm Stroke: 360 mm Pack format dimensions: 160 x 120 mm Labeler MR625/MR6318 – Cross Web Labeller, MR Etikettiertechnik Labeler model: MR625 OP6318LS570K15 Labeler features: Fully automatic cross web labelling, high-precision label placement, integrated with sealing system Labeler machine number: 29431/10 Labeler year of manufacture: 2010 Labeler power supply: 230 V, 50 Hz, 1000 VA Application of the Multivac R535 thermoformer The Multivac R535 is used across the food processing industry, including meat, poultry, and fish processing, as well as the production of cold cuts and other products requiring vacuum or modified atmosphere packaging. The machine performs well both on high-throughput production lines and in plants with a varied product range, where flexibility in pack format selection matters. Hedpfx Aoztwq Djbrsnr

Condition: defective spare-parts repository (used), Manufacturer: Illig Type: HSA 50C The machine is incomplete and not operational! Hnedsuk Dwfepfx Abrsr For spare parts only!!

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. Hsdpfx Aezka Ruebrjnr 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Condition: used, Year of construction: 2025, operating hours: 8 h, total length: 2,000 mm, total width: 3,000 mm, total height: 3,000 mm, overall weight: 1,000 kg, type of input current: three-phase, power: 2.5 kW (3.40 HP), pressure: 3 bar, compressed air connection: 3 bar, input frequency: 50 Hz, Designed to form portions of minced meat by volume - 8 portions of 1 kg + up to 100 g and feed them into molds made on a thermoforming machine. - Productivity of the machine unit: a) up to 8 cycles / min for minced pork; b) up to 8-5.4 cycles / minute on average, depending on the content of beef fat in minced meat. Total electrical power consumption - 2.5 kW. included: 1.Filler 2.Tipper option 2 position empty product Height ~ 700mm and ~1900mm Hnjdpfxov R Ttao Abrjr 3.Screw conveyor Multivac is not included - MULTIVAC R515 bottom film - 140 microns Top film - 60 microns. Pack size - 135 x 175mm, block size 4x2 - 375 x 585 mm Length x width x height 2000.0 × 3000.0 × 2000.0 This will make it easier to work in production. This will increase the production capacity of minced meat.

Condition: like new (used), Year of construction: 2024, Year of manufacture: 2024 Hnedpszfipcofx Abrsr Like new condition Film width: 422 mm Take-up length: 460 mm

Year of construction: 2001, condition: ready for operation (used), HEK GmbH VGO 200 S Heating Cabinet Hodpfx Abeg Hzqberenr Dimensions (approx.): Width: 1035 mm Depth: 800 mm + 210 mm pipe Height: 820

Condition: good (used), Tools / Moulds Multivac T300 Traysealer We have the following tools / moulds in stock for a Multivac T300 Traysealer: Hnodpfxou Tczmj Abrer Traysize 227 x 178 mm (2 tools in stock) Traysize 278 x 187 mm Traysize 208 x 160 mm (for SKIN-packaging) Traysize 164 x 123 mm (1/8 gastro)

Year of construction: 2016, condition: used, Trepko 9104-2 FFS Line + Freemantle S09 (2016) Trepko 9104-2 Form–Fill–Seal Cup Packaging Line (2016) with T. Freemantle S09 Wrapper This complete Form–Fill–Seal (FFS) production line from 2016 is engineered for high-capacity manufacturing of thermoformed cup products. The main unit, Trepko 9104-2, forms cups from roll-fed plastic material, fills them with viscous food products, seals with PET/EVOH lids, cuts multipacks, and discharges them for further downstream handling. Included with the line is a T. Freemantle S09 wrap-around packer from 2016 for grouping and wrapping finished multipacks. The line is ideal for yoghurt, dairy desserts, processed cheese, margarine/spreads, pâté, and other pumpable or semi-solid food products. Key Features - Complete FFS system: forming, filling, sealing, cutting, and discharge - Designed for 125 g cups (available formats: 4-pack and 8-pack) - Fully automatic, continuous operation - Hygienic, stainless-steel construction - Suitable for chilled and ambient food products - Includes T. Freemantle S09 wrapper/packer for downstream grouping Hedpfx Aox Eldxebrjnr - Supplied with documentation and manuals TREPKO 9104-2 – Technical Highlights Cup Forming - Thermoforming from PS/EVOH/PE roll material - Max film width: 740 mm - Max roll diameter: 1000 mm - Heavy-duty forming tools for 125 g round cups - Multi-cavity arrangement for high throughput Filling System - Stainless steel volumetric dosing block - Multi-nozzle configuration for accurate filling - Suitable for viscous food products - CIP-compatible design Sealing - Lidding material: PET/EVOH, width 240 mm - Heated sealing station for hermetic seals - Precise lid positioning and temperature control Cutting & Discharge - Automatic multipack cutting - Supports 4-cup and 8-cup retail pack formats - Smooth discharge conveyor for integration with wrapping or case packing T. Freemantle S09 Wrapping Unit (2016) - For grouping and wrapping cup multipacks or blocks - Film-fed automatic folder/wrapper - Adjustable for various package dimensions - Stainless-steel construction, CE marked - Compact, reliable downstream solution Applications - Stirred yoghurt - Sour cream / dairy desserts - Processed cheese spreads - Margarine, butter portions, vegetable fat spreads - Dips, pâté, paste-type products - Any pumpable or semi-viscous food requiring thermoformed cups Technical Information - Trepko Model: 9104-2 - Machine No.: 3859 - Year: 2016 - Voltage: 415 V / 50 Hz - Freemantle S09 Year: 2016 - Voltage: 240 V - Full documentation available. Condition The line is in very good used condition, complete with all major forming, filling, and sealing components, stainless-steel safety enclosures, and electrical cabinets. Well maintained and previously used for yoghurt production in a European dairy facility.

Year of construction: 2008, condition: good (used), KARVILLE Tornado 2500 – overhauled in 2020! Year of Manufacture: 2008 _____ Machine Specifications and Equipment: Tornado - Electric Tunnel The newest addition to our product line, the tornado tunnel is an electric shrinking system ideal for use on steam sensitive applications. With the capability to create a superior shrink appearance similar to steam tunnels on almost any container shape, this tunnel generates a compact solution to applications where high quality shrinking is required and the use of steam is not acceptable. The Tornado provides the best solution for:  Shrinking for Difficult Shaped Containers  Shrinking for Water Sensitive Products Hnsdpovxkatjfx Abror  Shrinking for Heat Sensitive Containers like PET  Eliminating after-shrink wrinkles  Saving Energy - High Efficiency Design  Saving Space - No Need for Extra Leister Guns and Special Rotation Systems  Minimizing Mechanical Maintenance - Simple Machine Structure  Eliminating the need for Steam Boiler and Infrastructure. This is ideal for blow molders, contract packers and thermoformers. _____ Accessories Included:  Manuals  Keyes  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: Hnsdpfxoq A Um Re Abror with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Hodshbu E Hjpfx Abrenr Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Hsdon D Ew Iopfx Abrenr Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool (PRICE FOR TOOLS: € 2.500.- / FOR EACH TOOL): Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Year of construction: 2006, condition: good (used), Illig SK 74-C from a workshop for the disabled Year of construction 2006 serial no.426-0172 +2 pallets with approx. 38 rolls of film Dimensions in mm approx. 2200x1600x1600 Hnjdpfx Aber Nv E Nsrsr

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 PRICE GREINER STACKING: € 6.500.- / LOT SWITZERLAND Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp Hsdpfx Abjq Nn Hceronr The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 00020, Type: Transfer device R3 Equipment / Additional information: Hedpfjupi Aqex Abrenr Air pressure: min 6 bar The maximum size of the stacking basket is 530x300mm.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2441.06.22, pressure: 6 bar, total width: 1,200 mm, total length: 895 mm, total height: 1,600 mm, input voltage: 230 V, compressed air connection: 6 bar, overall weight: 180 kg, Manual eyelet machine with molds (dies) for round and oval eyelets. New, never used, used for display or internal testing Hsdpfx Abszmynxersnr Complete with user manual

Condition: excellent (used), Year of construction: 2016, Blockmold body, tightly welded, annealed, machined, and pressure- tested, executed according to European Standards and P.E.D. - 97/23/EC heat-resistant steel for steam pressure boilers Maintenance Hnodpopwbmbofx Abrer platform with ascent aid and fall protection. Block dimensions: • Height: 4,100 mm • Depth (usable depth): 1,300 mm • Width: 1,040 mm • Block gross volume: 5.5 m³ Cycle times: • 12-16 g/l density - 20-22 blocks/hour • 17-19 g/l density - 18-20 blocks/hour • 20-23 g/l density - 16-18 blocks/hour • 24-28 g/l density - 14-15 blocks/hour • 29-35 g/l density - 12-14 blocks/hour Filling system: • Filling silo volume - 1 x 10 m³ • High-pressure suction blower - 11 kW • Number of filling pistols - 2 pcs. • Filling diameter - 300 mm • Drive - hydraulic Mechanics: • Hydraulic system - 15 kW • Demolding - hydraulic • Door movement - hydraulic Electrical equipment: • Servo inverters: Mitsubishi • Frequency inverters: Mitsubishi • PLC: Siemens Simatic • HMI panels: Siemens Simatic • PC: Axiomtek

Condition: excellent (used), Year of construction: 2005, Basic data: Production year: 2005 Dimensions (LxWxH): 7580x4360x5120 mm Hedpfxorfn Rve Abrenr Weight: 6000kg Operating voltage: 400/415V 50Hz Power consumption: 20kW Capacity at 20g/l: 1600kg/h Touch screen control panel Powder tank with screw feeder Complete documentation in both paper and electronic form (electrical schematics, CE compliance certificate, user manual) Condition: very good (machine clean and well-maintained, used exclusively for foaming white polystyrene) For an additional fee, our company can arrange transportation, as well as the installation and commissioning of the machine by our technicians at the location specified by the customer.

Year of construction: 2018, condition: good (used), Multivac L310 Conveyor Belt Labeller The conveyor belt labellers of the L 310 series offer the highest level of flexibility and precision in the labelling of a wide range of packs, such as pots, cans, folding cartons, tubular pouches, thermoformed packs or trays. They have a modular design and, thanks to a wide range of options for labelling, printing and inspection, they can be precisely adapted to even the most complex tasks. With a transport conveyor speed of up to 90 m/min and a labelling speed of up to 120 m/min, they can also meet the highest output requirements. The L 310 conveyor belt labeller is also available in a hygienic design for use in particularly hygiene-sensitive areas, such as Lifescience and healthcare products. Benefits:  Wide range of options available to perform a variety of tasks, including printing and inspection Maximum labelling speed and accuracy through the use of servo technology Easy operation thanks to the graphic HMI 2.0 or MC 08/MC 10 user interface Reduced downtime thanks to simple and fast label roll changes Transport belt changes without tools Consistent hygiene design Manufacturer:Multivac Model: L 310 Year:2018 Capacity:Up to 120 packs/min. Labelling Width:Up to 500 mm Labelling:Bottom and Top Belt Width:290 mm Machine Dimensions LxWxH:1.750x1.050x1.900 mm Machine Weight:200 kg. Hnsdpfx Absyffnpsrsr

Condition: excellent (used), SS outfeed conveyor belt for Multihead weigher This Stainless Steel conveyor belt is specially designed to transport carefully the portions from the Multihead Weigher to the next machine like a thermoformer or traysealer. The conveyor belt can easily be connected with a traysealer, thermoformer or another machine to drop the portions from the Multihead Weigher to the next machine 1 by 1. Hnodpfx Aboix Ngqjror The conveyor belt is equipped with a cover and has an option to connect a cooling-unit to keep the product cool. Material: Stainless Steel Belt width: 305 mm Chamber length: 200 mm Total belt width: 4.650 mm Input height: 1.880 mm (adjustable) Output height: 1.7650 mm (adjustable) Machine Dimensions (LxWxH): 4.600x1.500x2.450 mm

Condition: good (used), Year of construction: 2013, Cabinplant MHW 40-24 Multihead Weigher and Cabinplant Depositor/Distributor Machine functions: - Product is fed to infeed system, consisting of an elevator; - The elevator is controlled by the infeed sensor of the multihead weigher; - The multihead weighing machine discharges weighed out portions to Distributor / Depositor; - Distributor / Depositor distributes portions, orientates the product and dumps finished portions into a thermoforming machine or traysealer; Hnodpfewyu Trjx Abrjr This line consist of the following equipment:  - SS Stair; - Infeed conveyor belt; - SS Platform; - Cabinplant MHW 40-24 Multihead Weigher; - Cabinplant Depositor / Distributor; Cabinplant MHW 40-24 Multihead Weigher Manufacturer: Cabinplant Model: MHW 40-24 Year: 2013 Capacity: 150-500 gram Weighings/min.: Up to 120 Pan Size: 4 liter Number of pans: 24 Machine Dimensions LxWxH: 2.200x2.125x2.500 mm Machine Weight: 1.100 kg. Multihead Weigher is fully checked and serviced by Cabinplant Cabinplant Depositor / Distributor Manufacturer: Cabinplant Model: Sausage Depositor Year: 2014 Capacity: 150-500 gram Weighings/min.: Up to 120 Filling Capacity: 2x5 movable pitch

Condition: excellent (used), functionality: fully functional, Box forming Inner bag thermoforming Pasta filling Top filling Sealing Hnjdpfx Abeu Ivdtjrjr