Used Tos Sn for sale (11,642)

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, machine/vehicle number: 50052, Year of manufacture: 1970 Serial number: 50 052 The machine was overhauled in 2007. GENERAL CHARACTERISTICS OF THE MACHINE The machine features a fixed gantry with a moving table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindles in the VF 120 version. The gantry can also be fitted with one or two side-mounted (horizontal) VF 160 headstocks. The clamping surface consists of two interconnected clamping tables, which can also be used individually when disconnected (only one table can be operated at a time). Clamping Table: Dimensions of one table: 1,600 x 3,000 mm Total length of connected tables: 7,000 mm Clamping surface of connected tables: 6,500 mm Clamping T-slots (width x pitch x number): 28 mm x 160 mm x 9 pcs Table height from base: 900 mm Travel of one table: 3,000 mm (connected tables: 6,500 mm) Table feed rate: 20 – 2,000 mm/min Rapid traverse: 4,000 mm/min Gantry with height-adjustable crossbeam: Clearance between side columns: 2,020 mm Crossbeam height adjustment: 110 - 1,685 mm Crossbeam feed rate: 1,450 mm/min VF 160 Horizontal Headstock: Taper: ISO 60 Motor power: 30 kW Speed range: 15 – 710 rpm Feed rate: 10 – 2,000 mm/min Number of speeds: 16 VF 120 Vertical Headstock: Taper: ISO 50 Motor power: 18 kW Speed range: 28 – 910 rpm Number of speeds: 16 Tedpjxxwy Ajfx Adlsf Overall machine dimensions (L x W x H): 14,780 mm x 5,650 mm x 4,800 mm

Condition: as good as new (ex-display), Year of construction: 2025, TOS Varnsdorf WH 10 CNC Heidenhain TNC620 / Sinumerik ONE Work spindle diameter 100 / 105 mm Clamping taper ISO 50 Tool shank 69871 DIN Clamping adapter - screw TOS 4100793 Main motor power (S1/S6-40%) 22/34 kW Max. spindle speed 2500 / 3000 rev/min Max. torque of the spindle (S1/S6-40%) 2173/3250 Nm Table transverse travel X 1250 / 1800 mm Headstock vertical travel Y 1100 / 1250 mm Tedpfxspdrzzs Adlof Table longitudinal travel Z 1000 mm Spindle stroke W 630 mm Table clamping surface 1000x1100 / 1200x1400 mm Workpiece weight max. 3,000 / 4000 kg Feed range 4 – 6000 mm/min Total power consumption 50 kVA Machine weight 13 000 kg Features mechanical side - hardened guide surfaces on all axes - Biplast-V lining for the guide ways counter surfaces - Geometric accuracy according to the accuracy protocol TOS Varnsdorf WH 10 - Sliding working spindle with diameter of 100 mm, spindle bearings - FAG, SKF - hydraulic tool clamping set 22kN - Ott-Jakob - Headstock with cooling circuit - reTOS Varnsdorf - Ball screws on the X, Y, Z and W axes - KSK Kurim - Rim and pinion for precise rotary table positioning - reTOS Varnsdorf - Hydraulic system (unit, pumps, hoses, fittings) - Baseco - Rotary table reinforcement controlled by CNC system - Central lubrication system controlled by CNC system - Tribotec - Telescopic covers (X and Z axes) Features electrical side - CNC control system iTNC 620 Heidenhain Gen3 - Servo-motors Siemens 1FKZ 100…(5 pcs.) - Spindle motor 1PH8135... - 22kW - Converter Heidenhain UM114D - Linear scales Heidenhain for X, Y and Z axes - Encoder Heidenhain ROD 480 for rotary table - Encoder Heidenhain TTR ERM for spindle - Oriental stop - Control cabinet from Ritall with cooling unit - Wiring and modern electrical components - End-limit switches Balluff - Rotational control panel - Workplace lighting Other - Electrical inspection report, technical documentation - Certificate of geometric accuracy WH 10 Tos Varnsdorf - spindle ball-bar test protocol, linear scales accuracy protocol - cooling of work space placed on spindle forehead (tank, pump, hoses) - working spindle support with brass bushings SP200 Tos Varnsdorf - Heidenhain Options nr. 8, 19 and 20 - Heidenhain HR510 handwheel - Heidenhain Linear scales upgrade to LC115 series for X, Y and Z axis

Condition: good (used), Technical specifications: Tjdpfx Aov E Nafedljf -table surface: 400 x 1400 mm - longitudinal movement of the table - X axis: 1000 mm - lateral movement of the table - Z: 450 mm -vertical table movement - Y axis: 400 mm -spindle cone: ISO 50 -Spindle speed: 35.5 - 1800 rpm total machine power: 11 kW

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, The machine is in good technical condition; inspection under power is possible by prior arrangement. CNC control: Heidenhain 426. X-axis (longitudinal) 1250 mm Y-axis (cross) 900 mm Z-axis (vertical) 940 mm Table length 1000 mm Table width 1120 mm Max. workpiece weight 3000 kg Spindle diameter 100 mm Spindle speed min./max. - 50/2000 Complete overhaul in 2020. Tjdpfoxxmqdjx Adljf

Condition: used, Year of construction: 1988, functionality: unexamined, Equipment: documentation/manual, Good morning, I have for sale a Fellows gear shaping machine, Tos OHA 32A. Complete technical and electrical documentation available. Price: 11,000 EUR Technical specifications: Machine type: OHA 32 A Manufacturer: TOS Čelákovice Year of manufacture: 1987/1988 Workpiece diameter for external gearing: 30 – 320 mm Maximum basic diameter for internal gearing: 300 mm Maximum outside diameter for internal gearing: 400 mm Maximum gear module: 6 Maximum width of shaped gear: 70 mm Tedpfx Adsxwp Ngolof Number of gear teeth: 12–300 Maximum workpiece weight with clamp: 150 kg Distance from tool support surface on the slide to table surface: min. 30 mm, max. 310 mm Motor power: As per technical data sheet Machine dimensions (L x W): 2150 x 1420 mm, machine height: 1980 mm Machine weight: 4300 kg Electrical equipment: Total connected power 15 kVA

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, space requirement width: 1,975 mm, space requirement length: 1,800 mm, space requirement height: 1,900 mm, Equipment: documentation/manual, Machine is in very good condition - used as a training machine until 2018; since then, the machine has hardly been in operation. Operating voltage 400 V Tjdpfsw U Aahjx Adlsf Spindle mount ISO 40 Quill stroke 100 mm Spindle speeds 63 – 3150 rpm Fixed table

Condition: excellent (used), Year of construction: 2010, CATALOGUE NUMBER: 6591 TECHNICAL DATA - Maximum cutting height: 250 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Minimum blade diameter: 300 mm - Maximum blade diameter: 400 mm - Maximum infeed material width: 860 mm - Minimum workpiece length: 1,500 mm Todpfxolrvgis Adlsf * From above: - Kickback devices - 2 pneumatically pressed, metal, toothed feed rollers - Kickback devices - Pneumatically pressed, metal, toothed feed roller - Pressure unit - Saw shaft - Pressure unit - 2 pneumatically pressed, metal, toothed feed rollers * From below: - Metal idler roller - Guide - Kickback devices - Track - Saw shaft - Track - Stepless feed speed adjustment via inverter: 4–40 m/min - Main motors: 2 × 75 kW - Feed motor: approx. 3 kW - Electric body lift (up/down): 0.55 kW - Electric adjustment of saw shafts: 2 × 0.18 kW - Centralized lubrication - Extraction connector diameter: 2 × 300 mm - Dimensions (L × W × H): 3,400 × 2,650 × 2,200 mm - Weight: approx. 7,500 kg ADVANTAGES – Czech manufacture – Double-shaft – DTR technical documentation – Used multi-blade saw, very good condition Net price: 275,900 PLN Net price: 65,690 EUR Net price based on exchange rate 4.2 PLN/EUR (price subject to change in case of significant exchange rate fluctuations)

Condition: used, functionality: fully functional, Spindle: Speed range: 45 – 2800 rpm Spindle mounting: 40 or Morse 4 Maximum spindle torque: 9000 kgcm Table: Clamping surface: 1250 x 250 mm Max. table load: 3200 kg Number of T-slots: 3 pcs, 14 mm wide Slot spacing: 55 mm Travels: Longitudinal: 810 mm Cross: 275 mm Vertical: 400 mm Automatic feeds: 14 – 900 mm/min Rapid traverse: up to 2800 mm/min Motors: Spindle motor: 4.2 kW Feed motor: 0.75 kW Todpfoxg Icqjx Adlof Other: Machine weight approx. 1800 kg Dimensions: length: 1900 width: 1700 height: 1700 mm Financial information VAT/margin: Margin: The stated price includes VAT (VAT not deductible for businesses).

Condition: excellent (used), Year of construction: 2000, operating hours: 59,458 h, functionality: fully functional, machine/vehicle number: 1926, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, table width: 1,800 mm, table length: 2,200 mm, table load: 15,000 kg, overall weight: 48,000 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 2,500 rpm, power: 48 kW (65.26 HP), quill diameter: 130 mm, quill travel distance: 630 mm, Equipment: cabin, rotational speed infinitely variable, Technical Specifications X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Z-axis travel: 1,250 mm Table size: 1,800 × 2,200 mm Table load capacity: 15,000 kg Spindle speed (max): 2,500 rpm Spindle diameter: 130 mm Control: HEIDENHAIN TNC 426 Number of axes: 5 Automatic tool changer: 60 positions Tool holder: ISO 50 Tjdsxyu Dzspfx Adlef Operating Hours Machine on-time: 59,458 h Spindle running hours: 23,258 h Equipment & Features Operator's cabin Complete machine documentation included

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN TNC 430 Tsdpfx Aow Nmw Hodljf Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: good (used), Planing working width, mm 510 Maximum height for double-sided planing, mm 200 Maximum height for four-sided planing, mm 150 Lower planing shaft with 4 knives, electric motor 5.5 kW Upper planing shaft with 4 knives, electric motor 7.5 kW Right spindle diameter 40 mm, electric motor 4 kW Left spindle diameter 40 mm, electric motor 4 kW Electric height/width adjustment Todpexvfwkjfx Adlof

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,740 mm, total width: 1,740 mm, total length: 2,090 mm, overall weight: 1,725 kg, Equipment: documentation/manual, The machine is in very good condition – it was used as a training machine until 2018; since then, it has rarely been in operation. Operating voltage: 380 V. Spindle mount: ISO 40. Quill stroke: 100 mm. Spindle speeds: 40 - 2000 rpm. Rotary table. Tedpfx Adsw Urirjlof

Condition: excellent (used), CATALOG NUMBER 7134 TECHNICAL DATA - Max. planing width: 500 mm - Max. planing height: 190 mm Top section: - Anti-kickback fingers - Pulling feed roller, sequential - 2 rows of pressure rollers - Pull-in feed roller, sequential - 500 mm planing cutterhead, 4-knife, 7.5 kW motor - Pressure rollers - Smooth, pulling outfeed roller - Outfeed pressure roller Bottom section: - Adjustable infeed table + pressure roller - Smooth sliding roller - 500 mm planing cutterhead, 4-knife, 5.5 kW motor - 2 smooth sliding rollers - Side pressure roller Rear section: - Side spindles: 1) Right vertical 140 mm, 4 kW 2) Left vertical 140 mm, 4 kW - Spindle diameter: 40 mm - Spindles adjustable up/down, right/left - Stepless feed speed adjustment: 8–30 m/min - Electric table lifting - Extraction port diameters: 2x145 mm, 2x160 mm - Dimensions (L/W/H): 2050 x 1700 x 1700 mm - Weight: 2100 kg FEATURES – Ideal for flooring production – Electric table lifting – Czech manufacture – Used planer, in very good condition Tsdjpmtckepfx Adlof Net price: 37,900 PLN Net price: 9,020 EUR (based on EUR rate 4.2) (Prices may change with significant fluctuations)

Condition: good (used), functionality: fully functional, 840mm x 3,500mm, swing over cross slide 530mm, spindle bore 82mm, 7,1-900 Rpm, 18,5Kw, steadys, 4-jaw plate, DRO. Todpfx Asxqxvvodlof

Year of construction: 1990, condition: good (used), HEIDENHAIN TNC-355 Working travels 850x500x450mm Table size 1250x500mm Spindle taper 50 Todpjfg Ep Dofx Adlof Spindle speeds 35,5-1800 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Todpfx Asw Iu Nhedlsf Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2001, TOS TV-1000 A CONTUR MV 100 VA CNC machining centre Manufacturer: Trens Model: MC 100 VA Year of manufacture: 2001 Control: Heidenhain TNC 410 X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 760 mm Table length: 1080 mm Table width: 580 mm Tool changer with 40 positions Tedjxx Ndmepfx Adlef Tool holder according to ISO 40 Spindle speed: 8000 rpm Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg

Condition: excellent (used), functionality: fully functional, workpiece weight (max.): 300 kg, grinding length: 1,000 mm, grinding diameter: 400 mm, TOS BHU 40/1000 Cylindrical Grinding machine, grinding diameter 400 mm, grinding length 1000 mm, very good technical and visual condition. Technical specifications: Grinding diameter: 400 mm Grinding length: 1000 mm Maximum workpiece weight: 300 kg Grinding wheel size: 600 × 150 mm Longitudinal table travel (X-axis): 1–1790 mm Rotating grinding head: ±45° Rotating table: ±5° Spindle taper: Morse 5 Maximum spindle speed: 1240 rpm Total connected power: 22 kVA Tedpfxsxphdms Adlef Machine weight: approx. 6 t

Condition: excellent (used), CATALOG NUMBER 7244 TECHNICAL DATA - max working width: 800 mm - max working thickness: 160 mm Top side: - smooth feed roller - anti-kickback fingers - segmented, toothed, feed roller (allows simultaneous planing of multiple elements) - 2 pressure rows - segmented, toothed, feed roller (sequential, sectional) - pressure unit - planing shaft 810 mm, 4 knives, 18.5 kW - pressure unit - smooth, metal feed roller Bottom side: - adjustable infeed table with smooth roller - smooth feed roller - planing shaft 810 mm, 4 knives, approx. 10 kW - 2 smooth, metal feed rollers, adjustable - metal, smooth feed roller - electric table elevation - stepless feed speed regulation 7–40 m/min - motor approx. 2.2 kW - extraction port diameter 200 mm / 180 mm - dimensions (L x W x H): 1950 x 2100 x 1700 mm - weight approx. 2500 kg – manufactured in the Czech Republic – very good condition – used planer Todperfb Nvsfx Adlef Net price: 34,900 PLN Net price: 8,200 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)

Condition: good (used), Grindable, largest diameter: 200 mm Tjdslz Nxwspfx Adljf Center distance: 450 mm Weight of the machine approx: 2, 2 t Machine dimensions:

Condition: excellent (used), For sale: this machine. A video of the machine can be sent via WhatsApp. Complete and fully functional, already dismantled and stored in the warehouse. Very good condition. Max. workpiece diameter: 2300 mm. Max. workpiece height: 1500 mm. Clamping plate diameter: 2000 mm. Max. workpiece weight: 15,000 kg. Main motor power: 63 kW. Dimensions (L x W x H): 6160 x 3620 x 6220 mm. Machine weight: 32,600 kg. Todpfx Ajxwlpvjdljf

Condition: used, machine/vehicle number: 186137200089, used TOS tool milling machine model FNG 40 CNC Year of manufacture: 1988 with Heidenhain path control TNC 155 with fixed angular table 800x400mm Travel paths: X/Y/Z = 500/400/400mm Speed range: 10-3150 rpm Spindle: SK40 Chip guard, attachable Documentation for the machine and control is available. The machine is located in 71334 Waiblingen-Beinstein and can be inspected by appointment. Tsdpsxf Inkefx Adljf

Condition: good (used), Well used TOS TRENCIN SUI40-50. lathe Tsdpfxsrwd Hzj Adlef Center width 1500 mm Rotation over machine bed 500 mm Rotation over support 320 mm Spindle speed 14 to 2240 rpm Machine is operational and in good condition

Condition: excellent (used), CATALOG NUMBER: 7663 TECHNICAL DATA - Maximum planing width: 510 mm - Maximum planing height: 200 mm – Top section: - Anti-kickback fingers - Feed roller, toothed - Hold-downs, 2 rows - Infeed roller, toothed - Hold-down - Planing shaft, 510 mm, 4-knife, 7.5 kW motor - Hold-downs - Discharge feed roller, smooth - 2 outfeed pressure rollers Tjdpfx Aewqchfsdlef - Smooth feed roller – Bottom section: - Hold-down - Adjustable infeed table with slip roller - Planing shaft, 510 mm, 4-knife, 5.5 kW motor - 2 smooth slip rollers - Side pressure roller – Rear section: - Side spindles: 1) Vertical right: 140 mm, 4 kW 2) Vertical left: 140 mm, 4 kW - Spindle diameter: 40 mm - Fitted cutterheads: 4-knife, height 120 mm - Spindles adjustable up/down, left/right - Stepless feed speed adjustment - Electric table elevation - Extraction port diameters: 3x150 mm, 1x110 mm - Dimensions (L/W/H): 2300x1700x1700 mm - Weight: 2,200 kg ADVANTAGES – Ideal for flooring processing – Electric table elevation – Manufactured in Czech Republic – Used planer in very good condition Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7130 TECHNICAL DATA - Maximum working width: 800mm - Maximum working thickness: 200mm Top section: - Pawls - Toothed feed roller - 3 rows of pressure rollers - Planing shaft 810mm, for 4 knives (2 blades fitted), approx. 7.5kW - Pressure - Smooth, metal feed roller Bottom section: - Adjustable infeed table with slip roller Todpfx Aspmrkajdlsf - Planing shaft 810mm, for 4 knives (2 blades fitted), 7.5kW - Smooth, metal slip roller - Electric table raising - Extraction nozzle diameter: 120mm - Dimensions (L/W/H): 1900x1450x1350mm - Weight approx. 2500kg – Czech manufacture – Very good condition – Used planer Net price: 33,500 PLN Net price: 7,970 EUR depending on EUR 4.2 rate (Prices may change with significant fluctuations)