Used Veneer Machine for sale (63,812)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, working width: 1,200 mm, overall weight: 2,000 kg, table width: 1,200 mm, Veneer Splicing Machine Manufacturer: Fisher Rückle Model: Impetum 1200 Year of manufacture: 2019 For gluing and tightly splicing parallel-aligned veneer strips in a single operation with standard urea adhesives. Splicing Performance Continuously adjustable feed speed, practical reference value approximately 20 - 30 m/min. Technical Data: Veneer strip lengths (along the grain): 380 - 3800 mm Veneer strip widths (across the grain): 45 - 1200 mm Veneer strip thicknesses: 0.4 - 1.5 mm Feed speed: 5 - 40 m/min Throat depth: approx. 1,200 mm Touch panel with temperature, speed, and pressure displays. Data storage for machine settings for repeat orders. Nodpfxoymcu Ns Aaceku Robust and virtually wear-free stainless steel transport chains. 6 heating zones for various temperature settings. Integrated cooling unit for glue pot cooling.

Condition: used, Used machine Nksdoyncpiepfx Aaceu Cutting length: 2500 mm with handwheel clamping Availability: short-term Storage location: Röllbach

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Nedjx Upgcspfx Aacjku

Condition: used, Storage location: Supplier Nedpfx Aox Upfleaceku

Condition: good (used), Code: 0270 Brand: EMME ELLE Model: G.L.C. 1200 - CE Standard Longitudinal glue jointing machine for veneer - CE Standard The longitudinal jointing machine allows a perfect jointing of two veneer sheets in one operation by using a patentedsystem for the glue application. The machine is equipped with two tanks for the mass glue application. This innovation grants high quality and high jointing finishing since the glue is simultaneously applied on both edges to be jointed. The advantages of this type of glue processing are the following: 1_higher working speed (the machine can reach a speed of 35/40 mt/min with some wood types.) 2_In case, for any reason, no glue is applied on one of the two edges, the jointing is anyway granted since the glue is applied on the other edge as well. 3_A high resistant jointing is granted by applying the glue on both edges, since the two sheets are jointed with glue to glue and not with glue to wood. Technical characteristics Veneer sheet dimensions Thickness mm 0.4-2 Min. Length mm 360 Min. Width mm 45 Max. Width mm 1200 Technical Characteristics Heating area length mm 1200 Heating temperature up to 240° Transport speed 10-40 m/min Glue type UREA Power connection 6 Kw Voltage 400 V / 50 Hz Machine dimensions Length mm 2600 Nkedpjymfxqjfx Aaceu Width mm 2000 Height mm 800 Weight Kg. 2000

Condition: excellent (used), Veneer gluing machine FWJ900 With glue veneer, neat condition Nkedpfx Aovkfncjacsu Max. veneer thickness 2 mm, min. 0.4 mm Control via foot pedal Floor model, feed speed 7 mm, throat 900 mm, weight approx. 200 kg, dimensions: 1400 x 500 x 1680 mm

Condition: used, Throat depth: 420 mm Feed rate: approx. 6 m/min Nksdpswrfbdofx Aacju Kuper veneer splicing machine, type FW/Mini, for precise gluing and joining of veneer sheets with glue thread. Ideal for smaller workshops or flexible use in the production of high-quality veneered surfaces. Includes batch of glue threads.

Condition: used, Used machine Features and technical data: - Max. feed width: - at cutting angle 40°: 250 mm - at cutting angle 60°: 165 mm - Max. feed height: 180 mm - Adjustable cutting angle: 0 - 60° - Feed rate: 75 m/min - Table height: 650 mm - Table size: 1150 x 650 mm Nodpfx Aaox H Danjceku - Blade: 335 x 66 x 8 mm - Motor power: 1.5 kW - Electrical connection: 400 V Dimensions: 1230 x 860 x 1270 mm Weight: 385 kg Availability: short-term Stock location: Röllbach

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Njdpfjxgqmxex Aacsku Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: good (used), functionality: fully functional, with heating wire, outreach 920 mm, material 0.4-2 mm, feed rate approx. 15 m/min, required space 1400 x 600 x 1600 mm, weight approx. 350 kg in good condition Price ex works Nksdpeyayzaofx Aaceu Transport possible at extra cost!

Condition: good (used), Code: 0058 Brand: CASATI MACCHINE Model: Z 1000 - CE Standard Veneer splicing machine - CE Standard Technical data: Arm lenght mm 1000 Veneer thickness mm 0,4-2 Feed speed mt/min 8-18 Total electric power Kw 0,5 Electronic adjustment of the temperature Overall dimensions : mm 1300 x 500 x 1300 h Nodpfx Asyg N Enjacjku Weight kg 200

Condition: good (used), Code: 0599 Brand: KUPER Model: FW 1200 Nkedpfxoyg N Dws Aacou Thread splicer for veneer Reach mm 1200 Veneer thickness from 0,3 mm to 3 mm Feed speed from 10 to 50 mt/min Worktop height mm 925 Electrical connection 1,5 Kw Overall dimensions: mm 2150 x 750 x 1650 h Weight kg 425

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 3,550 mm, cutting width (max.): 530 mm, overall weight: 9,000 kg, stroke length: 100 mm, TECHNICAL DETAILS Usable cutting length (as double guillotine): 3,200 mm Usable cutting length (as single plate shear): 3,550 mm Press stroke: 100 mm Press width: 550 mm Min. cutting width: 18 mm Max. cutting width: 530 mm Scrap setting range: 0/50 mm Operating pressure: 6/7 bar MACHINE DETAILS Installed total power: 13.9 kW Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,700 x 1,800 mm Weight: 9,000 kg EQUIPMENT Robust steel construction Blade beam made of cast iron Njdpsyf Eucofx Aacjku Self-lubricating prismatic guides Adjustable rear support Press for holding the veneer package during cutting Photoelectric cells Electronic programming device Perimeter safety guards

Condition: good (used), Code: 0487 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Nkjdpextat Ujfx Aacju Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 2,400 mm, space requirement length: 9,000 mm, working width: 1,600 mm, Crosswise Veneer Splicing Machine / Cross Splicing Machine Manufacturer: Kuper Nsdpfx Asyayumeaceku Model: ACR CrossRunner 1600 Year of manufacture: 2007 Narrow cross splicing machines for pre-glued veneer strips with a small working width. The machine operates significantly faster in cross-feed mode compared to longitudinal machines and is thus an economical alternative, for example, for cross-veneered interior doors or smaller furniture parts. Working width: 1600 mm (along the grain) Veneer strip width: from approx. 60 mm Veneer thickness: approx. 0.3 - 2.5 mm Feed speed: approx. 30 m/min Suitable glues: PVAc or urea glue With automatic stacking Control: Siemens Simatic with touch display Voltage: 400 V, 50 Hz, 3 Ph Rated current: 16 A Overall dimensions (W x L): approx. 2400 x 9000 mm

Condition: used, functionality: fully functional, Arm reach: 630 mm Veneer thickness: 0.4 - 2 mm Feed speed: 7 m/min Voltage: 220 V, single-phase Nkjdpfx Aaex U Tggscou Overall dimensions: 950 x 500 x 1180 mm (H) Weight: 95 kg

Condition: excellent (used), Year of construction: 1996, goose neck 920 mm feed speed 20 m/min veneer thickness ca. 0,4 - 2,0 mm motor 400 V, 50 Hz,, 3 PH incl. manual incl. glue thread Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price Nkjdpfxjg Nn E Ne Aacsu • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, used, good conditionmake Kupertype FWJ 900machine no. 18033834throat depth 900 mmthreadheating airmobilespace requirement approx. 1400 mm x 600 mm x 1600 mmweight approx. 350 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Nkodpfjvwfaxsx Aacsu

Condition: used, used manufactured by Kuper type Mini 420 range 420 mm thread heating system electrical - new desk model required space ca. l x w x h mm 600 x 400 x 400 weight ca. 20 kg located in 97447 Gerolzhofen sale in current condition as seen Nodpfevwf Dwjx Aacjku - free on truck - without guarantee and guarantee

Condition: used, Machine cleaned, Nksdpfx Aov Hhtyeacsu function tested, overhauled, adjusted, test run Various parts replaced: cover – discharge roller – pressure gauge – belt drive used, good condition Make: Kuper Type: FWJ 900 Mach. No. 17063317 Projection 900 mm Air heating mobile Space required approx. 1300 mm x 600 mm x 1400 mm Storage location: 97447 Gerolzhofen, free on load, unpacked Handed over in the current condition as seen, without guarantee or warranty

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Nodpfxjuvdzuj Aacsku

Condition: used, Year of construction: 1966, functionality: fully functional, machine/vehicle number: 0371, Veneer splicing machine Manufacturer: Kuper Type: FW 100 Machine No: 0371 Njdevk U Thjpfx Aaceku Year of manufacture: 1966 Stand projection: 1150 mm Throughput speed: approx. 10 - 30 m min. Drive: brake motor 0.55 kW 380 V, optionally 220 V three-phase current Total connected load: 1.8 kW Heating: 7 V 120 W Weight: 630 kg Space required: 2300 / 800 mm Box dimensions: 2450 / 1450 / 900 mm Ship space: 3.2 m³

Condition: used, Year of construction: 1982, Used machine Condition: good Equipment and technical details: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Njdpfew I Ulpox Aacjku Main motor kW: 1.8 Pneumatic clamps Rear stop Weight approx. kg: 400 Location: Flörsheim Availability: short notice

Condition: used, Year of construction: 1995, Used machine Nedpfx Ajwi Adkoacsku Year of manufacture: 1995 Equipment and technical data: Working length: 3000 mm Handwheel clamping Unit: 2 kW Availability: Short-term Location: Flörsheim

Condition: used, Year of construction: 1993, Used machine Nodpow I Ur Nsfx Aacjku Year of manufacture: 1993 Tabletop machine The zig-zag thread used as the adhesive medium is applied from below Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm length, 35 mm width and a thickness of 0.3 - 2 mm Electrical connection: 230 V Throat depth: 700 mm Material feed approx. 6 m/min. Weight: approx. 54 kg Availability: short-term Storage location: Flörsheim