Used Tos Sus 80 for sale (61,489)

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m Hedpfx Adstv Iklodjng cube table 500 x 500 x 500 mm

Condition: good (used), Technical specifications: Hnodpfx Aov E Nafoddsg -table surface: 400 x 1400 mm - longitudinal movement of the table - X axis: 1000 mm - lateral movement of the table - Z: 450 mm -vertical table movement - Y axis: 400 mm -spindle cone: ISO 50 -Spindle speed: 35.5 - 1800 rpm total machine power: 11 kW

Condition: used, X-axis travel: 1250 mm Y-axis travel: 1100 mm Z-axis travel: 900 mm Spindle extension (W): 710 mm B-axis: 360° Clamping table size: 1000x1120 mm Max. table load: 3000 kg Spindle taper: ISO 50 Spindle speed: 2500 rpm Main motor power: 20 kW Overall machine dimensions (LxWxH): 6130x3600x2750 mm Total machine weight: 12400 kg Control system: Heidenhain iTNC 530 Hsdpox Dz Rcofx Addsng Accessories: operator's cabin, machine enclosure, measuring probe TS 460, tool holders Spindle hours: 8500

Condition: excellent (used), Max. Wheel Dia: 1600 mm Min. wheel Dia: 800 mm Hnodpfxev Igc No Addog Gear width: 560 mm Max. module: 16 Min. Module: 4 Table dia: 1350 mm Table load cap: 7000 Kg Machine weight: ca. 18 Tonnes Machine with change gear, arbors, fixtures set Machine is in excellent condition

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, space requirement width: 1,975 mm, space requirement length: 1,800 mm, space requirement height: 1,900 mm, Equipment: documentation/manual, Machine is in very good condition - used as a training machine until 2018; since then, the machine has hardly been in operation. Operating voltage 400 V Hjdow U Aahopfx Addong Spindle mount ISO 40 Quill stroke 100 mm Spindle speeds 63 – 3150 rpm Fixed table

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, spindle speed (max.): 2,500 rpm, total width: 1,000 mm, table length: 1,120 mm, travel distance W-axis: 710 mm, quill diameter: 100 mm, year of last overhaul: 2025, The machine is in very good technical condition after modernization in 2025, connected and available for testing. Heidenhain iTNC 530 control system. Accessories: tools, clamping angles, workpiece probe. Hnsdjxz E N Djpfx Addeg

Condition: good (used), Well used TOS TRENCIN SUI40-50. lathe Center width 1500 mm Hedpfx Aerwd Hzjddjng Rotation over machine bed 500 mm Rotation over support 320 mm Spindle speed 14 to 2240 rpm Machine is operational and in good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, control type: CNC control, actuation type: electric, controller manufacturer: Safan, controller model: TS1, bending force (max.): 80 t, working width: 2,550 mm, stroke length: 290 mm, throat depth: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, operating speed: 90 mm/s, table height: 950 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 6,800 kg, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, input voltage: 400 V, warranty duration: 3 months, pressing force: 80 t, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Hnedpfeut S E Nsx Addjg Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: used, machine/vehicle number: 1001, WP-UC 80 stainless steel bowl on stanchions for the UC 80 AC mixer Top condition Hnedpfsc Upuqjx Addsg

Condition: excellent (used), Year of construction: 1998, CN Heidenhain TNC 430 PA Hedoxdwkfopfx Addeng Maximum spindle torque: 900 Nm Maximum feed force in the X, Y, Z axes: 25,000 N Maximum workpiece weight: 2,500 kg (at 1 m table length) Table dimensions: 1,000 × 14,000 mm Number of T-slots in the table: 7 T-slot width × spacing: 22H7 × 140 mm Longitudinal travel (X): 12,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 1,500 mm Horizontal spindle: Minimum distance between the horizontal spindle axis and table surface: 275 mm Maximum distance between the horizontal spindle axis and table surface: 1,775 mm Vertical spindle: Minimum distance between the vertical spindle face and the table: 50 mm Maximum distance between the vertical spindle face and the table: 1,550 mm Spindle taper: ISO 50 Spindle diameter: 85 mm Tool clamping force in the spindle: 16,500 N Main machine dimensions: Length: 17,850 mm Width: 5,640 mm Width with enclosure: 6,720 mm Height: 4,350 mm Floor space required: 73 m² Total machine weight: approx. 34,000 kg Electrical cabinet weight: approx. 820 kg Mains voltage: 50 V (3 × 400) Total machine power: 100 kVA Fuses to be provided by the customer outside the machine for 400 V Hydraulic unit weight without oil: 150 kg

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,740 mm, total width: 1,740 mm, total length: 2,090 mm, overall weight: 1,725 kg, Equipment: documentation/manual, The machine is in very good condition – it was used as a training machine until 2018; since then, it has rarely been in operation. Operating voltage: 380 V. Spindle mount: ISO 40. Quill stroke: 100 mm. Spindle speeds: 40 - 2000 rpm. Rotary table. Hnjdpfx Adjw Uriredeg

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, machine/vehicle number: 50052, Year of manufacture: 1970 Serial number: 50 052 The machine was overhauled in 2007. GENERAL CHARACTERISTICS OF THE MACHINE The machine features a fixed gantry with a moving table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindles in the VF 120 version. The gantry can also be fitted with one or two side-mounted (horizontal) VF 160 headstocks. The clamping surface consists of two interconnected clamping tables, which can also be used individually when disconnected (only one table can be operated at a time). Clamping Table: Dimensions of one table: 1,600 x 3,000 mm Total length of connected tables: 7,000 mm Clamping surface of connected tables: 6,500 mm Clamping T-slots (width x pitch x number): 28 mm x 160 mm x 9 pcs Table height from base: 900 mm Travel of one table: 3,000 mm (connected tables: 6,500 mm) Table feed rate: 20 – 2,000 mm/min Rapid traverse: 4,000 mm/min Gantry with height-adjustable crossbeam: Clearance between side columns: 2,020 mm Crossbeam height adjustment: 110 - 1,685 mm Crossbeam feed rate: 1,450 mm/min VF 160 Horizontal Headstock: Taper: ISO 60 Motor power: 30 kW Speed range: 15 – 710 rpm Feed rate: 10 – 2,000 mm/min Hnsdpfx Aexxwy Aoddog Number of speeds: 16 VF 120 Vertical Headstock: Taper: ISO 50 Motor power: 18 kW Speed range: 28 – 910 rpm Number of speeds: 16 Overall machine dimensions (L x W x H): 14,780 mm x 5,650 mm x 4,800 mm

Condition: used, Year of construction: 1987, x-travel 600 mm y-travel 400 mm z-travel 400 mm spindle taper ISO 40 quill stroke 100 mm spindle turning speed range 40 - 2000 U/min voltage 380 V Table dimensions 800 x 400 mm weight 1,9 t Hsdpfx Adjiclmxsdeng total power requirement 3,0 kW dimensions of the machine ca. 1,90 x 1,80 x 1,90 m

Condition: good (used), functionality: fully functional, Used TOS SUI 50 - 1500 lathe with extensive accessories for sale For sale: robust and precise TOS SUI 50 - 1500 lathe – ideal for workshops, metalworking, and ambitious hobbyists. 🔹 Distance between centers: 1500 mm 🔹 Swing over bed: 500 mm 🔹 Spindle speed: 14 – 2240 rpm 🔹 Spindle bore: 56 mm 🔹 Dimensions (LxWxH): 3000 x 1300 x 1500 mm 🔹 Weight: approx. 2.9 tons ✅ The machine is used, but in technically good condition and ready for immediate use. Hnodpfx Ajwu Dn Ioddjg 📍 Location: Werdau 📅 Inspection possible – simply arrange an appointment! If you're interested, just get in touch – preferably by message or phone.

Condition: good (used), Grindable, largest diameter: 200 mm Hnsdpfolz Nxwox Addjg Center distance: 450 mm Weight of the machine approx: 2, 2 t Machine dimensions:

Condition: good (used), Planing working width, mm 510 Maximum height for double-sided planing, mm 200 Maximum height for four-sided planing, mm 150 Lower planing shaft with 4 knives, electric motor 5.5 kW Hnodpfxsxvfwko Addjg Upper planing shaft with 4 knives, electric motor 7.5 kW Right spindle diameter 40 mm, electric motor 4 kW Left spindle diameter 40 mm, electric motor 4 kW Electric height/width adjustment

Condition: ready for operation (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, operation weight: 12,000 kg, Hello, I have for sale a Biber 80 plus Valtra S 280/4 chipper assembly, tractor production year 2003, good condition, Sisu engine, twintruck air conditioning, reverse drive, Biber 2007 editor, inlet 100/65cm, 8 knives, Kronos crane 8.3m weight 12 tons, machines in good condition, after inspection. I invite you. Hsdpfxsv Nxb Hs Addong

Condition: as good as new (ex-display), Year of construction: 2025, TOS Varnsdorf WH 10 CNC Heidenhain TNC620 / Sinumerik ONE Work spindle diameter 100 / 105 mm Clamping taper ISO 50 Tool shank 69871 DIN Clamping adapter - screw TOS 4100793 Main motor power (S1/S6-40%) 22/34 kW Max. spindle speed 2500 / 3000 rev/min Max. torque of the spindle (S1/S6-40%) 2173/3250 Nm Table transverse travel X 1250 / 1800 mm Headstock vertical travel Y 1100 / 1250 mm Table longitudinal travel Z 1000 mm Spindle stroke W 630 mm Table clamping surface 1000x1100 / 1200x1400 mm Workpiece weight max. 3,000 / 4000 kg Feed range 4 – 6000 mm/min Total power consumption 50 kVA Machine weight 13 000 kg Features mechanical side - hardened guide surfaces on all axes - Biplast-V lining for the guide ways counter surfaces - Geometric accuracy according to the accuracy protocol TOS Varnsdorf WH 10 - Sliding working spindle with diameter of 100 mm, spindle bearings - FAG, SKF - hydraulic tool clamping set 22kN - Ott-Jakob - Headstock with cooling circuit - reTOS Varnsdorf - Ball screws on the X, Y, Z and W axes - KSK Kurim - Rim and pinion for precise rotary table positioning - reTOS Varnsdorf - Hydraulic system (unit, pumps, hoses, fittings) - Baseco - Rotary table reinforcement controlled by CNC system - Central lubrication system controlled by CNC system - Tribotec - Telescopic covers (X and Z axes) Features electrical side - CNC control system iTNC 620 Heidenhain Gen3 - Servo-motors Siemens 1FKZ 100…(5 pcs.) - Spindle motor 1PH8135... - 22kW - Converter Heidenhain UM114D - Linear scales Heidenhain for X, Y and Z axes - Encoder Heidenhain ROD 480 for rotary table - Encoder Heidenhain TTR ERM for spindle - Oriental stop - Control cabinet from Ritall with cooling unit - Wiring and modern electrical components - End-limit switches Balluff - Rotational control panel Hnodpfxepdrzze Addog - Workplace lighting Other - Electrical inspection report, technical documentation - Certificate of geometric accuracy WH 10 Tos Varnsdorf - spindle ball-bar test protocol, linear scales accuracy protocol - cooling of work space placed on spindle forehead (tank, pump, hoses) - working spindle support with brass bushings SP200 Tos Varnsdorf - Heidenhain Options nr. 8, 19 and 20 - Heidenhain HR510 handwheel - Heidenhain Linear scales upgrade to LC115 series for X, Y and Z axis

Condition: excellent (used), TOS-TRENCIN SV 18 RA – Lead and Feed Screw Lathe For sale is a lead and feed screw lathe from the manufacturer TOS-TRENCIN, model SV 18 RA. The machine is in perfect condition and comes from the R&D department of a former VEB in Neubrandenburg (never used in production). ——— Technical Specifications • Swing over bed: 360 mm • Swing over cross slide: 215 mm • Turning length: 1,050 mm • Spindle bore: 40 mm • Distance between centers: 900 mm • Speed range: 14–2,800 rpm (21 steps) • Center height: 180 mm • Total connected load: 6.5 kW • Machine weight: approx. 1.9 t • Footprint (L×W×H): approx. 2.9 × 1.0 × 1.2 m ——— The machine is immediately ready for operation. • Inspection possible at any time • Loading and shipping can be arranged without issue ——— Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net, plus VAT. Subject to modifications and errors. Hnodpsxk Tyiefx Addjg

Condition: used, Year of construction: 1985, functionality: fully functional, travel distance X-axis: 4,700 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 1,300 mm, total width: 3,000 mm, total length: 8,710 mm, total height: 5,250 mm, spindle diameter: 130 mm, table load: 16,000 kg, table length: 2,200 mm, table width: 2,200 mm, overall weight: 40,000 kg, Accessories: 2 different heads 1 faceplate Hedpew Hr Hpofx Addsng

Condition: ready for operation (used), Year of construction: 2005, functionality: limited functionality, spindle speed (min.): 31,000 rpm, Equipment: rotational speed infinitely variable, We are offering for sale, due to a trade-in, a TOS BDU 250 A internal cylindrical grinding machine with the following specifications: Grinding diameter: 250 mm Maximum longitudinal table travel: 600 mm Maximum internal diameter: 250 mm Smallest diameter: 10 mm Workpiece spindle speed: 25; 45; 80; 140; 250; 450 rpm Internal grinding spindle mount: Currently Ø 100 mm Maximum diameter without chuck guard: 470 mm Adjustment of grinding headstock: 15° and 90°, mounted on an oscillating longitudinal table. Equipment: - Coolant tank - Hydraulic unit - Used internal grinding spindle - Machine lamp - Documentation and operating manual Machine information: Hnedpfxew Rllxj Addsg Machine fault (transformer faulty, automatic operation possible only without dressing device).

Condition: ready for operation (used), Year of construction: 2001, CNC milling machine TOS TV-1000 A CONTUR Manufacturer: Trens Model: MC 100 VA Year of construction: 2001 Condition: used Control unit: Heidenhain TNC 426 X-axis travel: 1000mm Y-axis travel: 600mm Z-axis travel: 760mm Table length: 1080mm Table width: 580mm Tool changer with 40 positions Tool holder according to ISO 40 Spindle speed: 8000 rpm Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg Hodpfx Adehlp Iwjdong Shipping possible throughout Germany and Austria. Surcharge 1000 € Sale excluding warranty.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 780 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 2,500 rpm, TECHNICAL DETAILS Travel X-axis travel: 1,600 mm Y-axis travel: 1,000 mm Z-axis travel: 780 mm Number of machining axes (excluding parallel axes): 5 Table Clamping surface (left-right): 1,000 mm Clamping surface (front-back): 1,000 mm Workpiece weight (max): 6,000 kg Rotary axis: C > Positioning accuracy 0.001° Milling Spindle/Head Spindle type: Swivel head > Positioning accuracy 2.5° Speed range: up to 2,500 rpm Hnedoxb Rpcopfx Addog Tool holder: ISO SK 50 Drive power: 22 kW Tool Magazine Tool positions: 60 Workpiece Automation Number of storage spaces: 2 Pallet length: 1,000 mm Pallet width: 1,000 mm Number of pallets: 2 MACHINE DETAILS Dimensions & Weights Space requirement (left/right): 6,400 mm Space requirement (front/back): 6,900 mm Overall height: 4,000 mm Total weight: approx. 26,000 kg Control: HEIDENHAIN TNC 426

Condition: good (used), Year of construction: 1995, Planing width mm 220 Hnsdpehaxh Nsfx Addeg Planing height mm 120 Number of spindles 5 Arrangement of spindles down / right / left / up / down Spindle speed max / min 6000 Electric height adjustment Max feed m / min 25

Condition: good (used), Year of construction: 2001, TOS TV-1000 A CONTUR MV 100 VA CNC machining centre Manufacturer: Trens Model: MC 100 VA Year of manufacture: 2001 Control: Heidenhain TNC 410 X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 760 mm Table length: 1080 mm Table width: 580 mm Tool changer with 40 positions Tool holder according to ISO 40 Hodsxx Ndmjpfx Addong Spindle speed: 8000 rpm Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg