Used Traub Cnc Lathe for sale (108)

Condition: used, Year of construction: 1996, Traub Type TNC 30 DGY CNC Lathe with Traub System TX 8F Control (1996) Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Gcsdpfxox E Tppj Ab Usa

Condition: not inspected (used), Year of construction: 1989, We are offering the following as part of an insolvency sale: 2 x CNC lathes (1 x with sub-spindle, 1 x with lower turret), used + Bar feeder + Accessories 1. CNC lathe with sub-spindle Gedpfx Abox Ed A De Ujca Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 x collets - Approx. 40 x jaw sets - Various tool holders + tools - Documentation The machines are untested, but they were in operation until decommissioning. Sale is ex-location; loading can be provided at extra cost.

Condition: used, Year of construction: 2011, controller manufacturer: Mitsubishi, controller model: TX-8i, _____ Description: Year of manuf. : 2011 Control : Mitsubishi TX-8i Turning length : 50 mm Gcedex E Inmspfx Ab Uja Mainspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Barcapacity:15 mm Movement in Z1:50 mm Workpiececlamping:Collet chuck Subspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Movement in X4/Z4:222/139 mm Rapid travers in X3/Z4:15 m/min Workpiececlamping:Collet chuck Toolcarrier I (X/Y): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Movement in X1/Y1:35/37,5 mm Rapid travers in X1/Y1:15 m/min Toolcarrier II (X/Z): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Movement in X2/Z2:35/50 mm Rapid travers in X2/Z2:15 m/min Front attachment: Number of stations:4 Taper:ø28 mm Distance between stations:32 mm Tooldrive:12.000 rpm, 4 kW, 7 Nm Number of driven stations:4 Movement in X3/Z3:222/139 mm Rapid travers in X3/Z3:15 m/min Rear attachment: Number of stations:4 Taper:ø28 mm Distance between stations:32 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Number of driven stations:4 Movement in X4:39 mm Rapid travers in X4:15 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump Rawmaterialfeed:Bar loader, FMB minimag 20/3200 Finishedpartremoval:Workpiecehandling (Tube) Oilmistseparation:Interface mechanical prepared Toolholder:Misc. static and driven toolholder

Condition: used, Year of construction: 2005, control Traub TX8i weight of the machine ca. 4000 kg Gedpfx Asxzk Rmjb Ujca

Year of construction: 2007, operating hours: 24,593 h, condition: used, machine/vehicle number: 5010481, Max. turning diameter: 340 mm, max. turning length: 750 mm, max. spindle speed: 4,000 rpm, chip conveyor, TX 8I control system, 12-position turret Gcodpfx Abex Akmqe Uea

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders Gcedpfexwdw Eox Ab Uja - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 1996, Traub TNC 42 CNC Lathe with Traub System TX8F Control, Twin Spindle, Twin Turret, (2) x 14 Station ATC, Model TNC 42/65DGY, Collet Chuck, Swarf Conveyor. S/No. 413 (1996), IEMCA Type CNC Boss 542/32 Barfeed. S/No. 97012709 (1997) Driven Tooling Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Gsdex E Tmhepfx Ab Usca

Condition: not inspected (used), Year of construction: 1989, We are offering the following as part of an insolvency sale: 2 x CNC lathes (1 x with sub-spindle, 1 x with lower turret), used + Bar feeder + Accessories 1. CNC lathe with sub-spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Godjx Edz Tepfx Ab Ueca Control: Fanuc 0-T - HYDROBAR bar feeder - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 x collets - Approx. 40 x jaw sets - Various tool holders + tools - Documentation The machines are untested, but they were in operation until decommissioning. Sale is ex-location; loading can be provided at extra cost.

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 978/9, turning length: 400 mm, travel distance X-axis: 120 mm, travel distance Z-axis: 300 mm, total height: 2,100 mm, total length: 3,500 mm, total width: 2,000 mm, overall weight: 3,000 kg, controller manufacturer: TRAUB, controller model: SYSTEM TX 8 F, TRAUB TND 160 CNC Lathe - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 36 A - Connected load: 18.8 kW The machine is equipped with a tailstock, a three-jaw chuck (diameter: 140 mm), an 8-position tool turret, and a chip conveyor. Gcjdsxx Ny Iepfx Ab Uja This is an item from a training workshop. FCA D-73235 Weilheim Teck, loaded onto truck

Condition: good (used), Year of construction: 1986, controller manufacturer: TRAUB, controller model: TX 8, number of spindles: 1, CONTROLS .. CNC controls TRAUB TX 8 BASIC FUNCTIONS .. number of spindles: 1 .. number of x/z slides: 1 .. number of turrets: 1 .. live positions: yes .. number of c-axes: 1 WORKING RANGE TURNING .. swing diameter (max): 450 mm .. turning diameter (max): 350 mm .. bar diameter (max): 60 mm .. worpiece length max.: 490 mm MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. c-axis: yes TOOL MAGAZINE .. number of positions: 12 ELECTRICAL SPECIFICATIONS .. total power consumption: 39 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 3150 mm .. space requirements -front/back-: 2100 mm .. total height: 2100 mm .. total weight approx.: 4000 kg ATTACHMENTS (TURNING) Gcjdpfx Aoxxqbyeb Usa .. tailstock: yes - Machine in good condition Features: - Complete tool holders (very comprehensive) - Includes driven tool holders - Documentation

Condition: good (used), Year of construction: 2004, control TRAUB SYSTEM TX8H weight 3500 kg range L-W-H 3960 x 1640 x 1800 mm output 11 kW number of spindle speeds 5600 / 4000 min-1 Torque 200 / 280 Nm The TRAUB turning machine TNA 300 was designed for the following machining of workpieces with a turning length of 450 mm. --> for machining metal and plastics with a defined cutting edge using suitable tools. --> for mounting in jaw chucks of sizes 160 to approx. 250 --> for machining material bars up to a Ø of 42 or 65 mm --> with EHS special version Workpiece removal device --> chip conveyor 800 mm long -> Technical data Working range Spindle diameter: 42 mm --> Spindle head DIN 55026, size: A5 --> Clamping fixture diameter: 160-175 mm / 200-250 mm --> turning diameter max: 275 mm --> Distance over turning centre: 35 mm --> max. turning length: 450 mm --> Swing diameter over cross slide: 395 mm --> Swing diameter over bed: 520 mm --> Tool carrier Tool holders for cylindrical shank DIN 60880: 12 pcs. --> Shank diameter: 30 mm --> Chisel cross-section: 20x20 mm --> Switching time 1 station: 0.5 sec. --> Switching time each additional station: 0.15 sec. --> Feed drives X-axis: --> Slide travel: 210 mm --> Feed force: 5000 N --> rapid traverse/path speed: 15 m/min --> Z-axis: --> Slide travel: 450 mm --> Feed force: 6000 N --> rapid traverse/path speed: 18 m/min --> Y-axis: --> slide path: +- 35 mm Gedpowwl Iuefx Ab Ujca --> Feed force: 6000 N --> rapid traverse/path speed: 10 m/min --> C-axis: --> Speed: 100 min-1 --> Torque: 140 / 196 Nm --> electrical resolution: 0.001 degree --> tailstock quill diameter: 70 mm --> quill stroke: 60 mm --> Stroke of the quick retraction: 280 mm --> quill setting force at 55 bar: 8600 N --> Mounting according to DIN 228: Mk 4 --> Steady rest Clamping range: 8 - 95 mm --> Workpiece removal device Max. part length: 250 mm --> Max. part weight: 3 kg

Condition: used, Year of construction: 2003, max. bar material dia. 65 mm max. bar length 3.000 mm control System TX 8H CNC lathe | TRAUB - TNC 65 equipped with bar loader . Gsdpfx Abexbtp Es Usca The machine is in a well-maintained condition and can be inspected at any time under power. The machine videos from the production plant will be shared on request. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65

Condition: used, Year of construction: 1996, Traub Type TNC 30 DGY CNC Lathe with Traub System TX8F Control, Twin Spindle, Twin Turret, (2) x 12 Station ATC, Swarf Conveyor, Collet Chuck. S/No. 475 (1996), IEMCA CNC Boss 542 Barfeed. S/No. 97011301 (1997) Driven Tooling Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Gjdox E Tivepfx Ab Ujca

Condition: used, Year of construction: 1988, Technical details: turning diameter over bed: 360 mm turning dia. over face-slide: 160 mm Gsdju Rqabepfx Ab Ujca turning length: 800 mm longitudinal traverse (z-axis): 810 mm facing movement (x-axis): 205 mm control: TX-8 spindle passage: 60 mm revolution per minute: 63 - 3150 / 2 step U/min feed:: 10.000 mm/min. tool turret - number of stations: 8 operating hours - idle run: 8834 h tailstock taper ISO: SK30 DIN 2080 tailstock quill stroke: 105 mm operating pressure: 40 bar total power requirement: 38 kW Weight approx.: 3,1 t dimension machine xH: 1,8 x 3,3 x 1,8 m dimensions of hydaulic: 580 x 400 x 750 mm Equipment: Lathe chuck Ø 200 mm, hydraulic Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system control panel Accessories Fine adjustment device for tool set-up *

Condition: excellent (used), Year of construction: 1996, operating hours: 46,282 h, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 2,600 mm, total length: 11,000 mm, total width: 2,000 mm, overall weight: 6,000 kg, controller manufacturer: TRAUB, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, number of slots in tool magazine: 10, - Includes two 10-position tool turrets with driven tool stations - Includes HAINBUCH chuck system - Includes sub-spindle, bar feeder (manufacturer: STAMAG) - Includes chip conveyor TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection: 54 kW - Connected load: 39 kW - Noise emission value at operator position: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Air humidity: max. 70% - Workpiece removal via sub-spindle - Max. sub-spindle speed: 4000 min-1 - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input and output resolution: - X/Z: 0.001 mm - C axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation cycle: 0.34 ms - Largest thread pitch: 999.999 mm - Largest radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Speed override: 50…120% - Speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-functions: 3 digits - B-functions: 6 digits - Memory capacity: 32,000 characters - Tool correction pairs: 40 NUMERICALLY CONTROLLED TURNING AND POSITIONING UNIT (C AXIS): Main spindle: - Max. speed: 80 min-1 - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 min Sub-spindle: - Max. speed: 80 min-1 - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 min TOOL CARRIER 1 & 2: - Driven tools per tool carrier: 10 (14) Gcodpfewpa Ruox Ab Uja - Max. speed: 4000 (8000) - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm - Tool holder/tool carrier quantity: 10 (14) - Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm - Chisel cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Switching time one station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z DIRECTION): - Max. speed: 4000 min-1 - Max. clamping diameter: 65 mm - Three-phase motor steplessly programmable: 11 kW - Torque: 210 Nm - Feed force at 100% duty cycle: 6000 N - Feed travel: 520 mm - Ball screw operation: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT LUBRICATION: - Per tool carrier: 1-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTICE: Due to sporadic work, the operating hours may still change slightly.

Condition: good (used), Year of construction: 1993, - TRAUB control TX 8F - spindle passage 42 mm - Working spindle speed: 40 - 4.000 1/min - 4 grooving slides: stroke 60 mm - 8-fold turret - high pressure pump 25 bar - backworking (2 spindles) Gcsdpoldd Iqjfx Ab Uja - bar feeder (3 m) - chip conveyor

Condition: used, Year of construction: 2004, controller manufacturer: Mitsubishi, controller model: TX-8i, _____ Description: Year of manuf. : 2004 Control : Mitsubishi TX-8i Turning length : 450 mm Mainspindle: Technology:Belt-driven spindle Speed:4.000 rpm Power:18,5 kW Torque:230 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop Gr. 65 Subspindle: Technology:Belt-driven spindle Speed:4.000 rpm Power:11 kW Torque:210 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop Gr. 65 Godpfxoxhbfns Ab Uoca Ejector:Hydraulic with flush Movement in Z:520 mm Rapid travers in Z:30 m/min Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:4.000 rpm, 4 kW, 16 Nm Movement in X/Y/Z:140/70/450 mm Rapid travers in X/Y/Z:15/6/30 m/min Toolcarrier II (X/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:4.000 rpm, 4 kW, 16 Nm Movement in X/Y/Z:140/450 mm Rapid travers in X/Y/Z:15/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling unit with Paperbeltfilter Rawmaterialfeed:Barlaoder, FMB SL80S Finished part removal:Hydraulic part catcher with coneyor belt Oilmistseparation:Electrostatic extraction, LTA AC3001 Further Accessory:Misc. Toolholder, Rinsing pistol

Condition: used, Year of construction: 1996, max. bar material dia. 65 mm max. swing diameter 175 mm max. bar length 3.000 mm control System TX 8F travel -x axis 140 mm travel -z axis 520 mm CNC lathe | TRAUB - TNC 42/65 DG equipped with bar loader. The machine is in a well-maintained condition and can be inspected at any time under power. The machine videos from the production plant will be shared on request. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Gcjdpfxexbtq Ns Ab Uja #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

Condition: good (used), Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Gjdpfx Abjtrvzxs Ujca Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 180 mm Gjdpfx Aou Ix N Seb Ueca turning length: 490 mm swing diameter: 450 mm cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet without tailstock i.D. *

Condition: not inspected (used), Year of construction: 1996, operating hours: 46,282 h, functionality: unexamined, machine/vehicle number: 18770, controller model: TX 8F, clamping diameter: 65 mm, counter spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 56 mm, No minimum price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20.11.2025! Bidding obligates the buyer to collect within the collection period from 01.12.2025 to 05.12.2025! TECHNICAL DETAILS Max. workpiece diameter: 56 mm Max. clamping diameter: 65 mm Max. counter spindle speed: 4,000 rpm Counter spindle power: 11 kW Counter spindle constant power range: 1:8 Counter spindle torque: 210 Nm Tool drive Max. tool drive speed: 4,000 rpm Tool drive power at 100% duty cycle: 1.5 kW Tool drive power at 15% duty cycle: 4 kW Tool drive torque at 15% duty cycle: 12.4 Nm (4 Nm) Number of tool stations: 10 (14) Cylindrical tool holder: ∅ 30 x 55 mm (25 x 48 mm) Tool shank cross section: 20 x 20 mm (16 x 16 mm) Chip-to-chip time: 1.2 s Indexing time per station: 0.6 s Indexing time over 5 stations: 1.5 s Positioning unit X/Z: 0.001 mm Positioning unit C-axis: 0.001° Fine interpolation increment: 0.34 ms Max. thread pitch: 999,999 mm Max. radius: 99,999.999 mm Max. speed (C-axis): 80 rpm Torque (main spindle C-axis) at 100% duty cycle: 100 Nm Accuracy (main and counter spindle C-axis): ± 3 min Rapid traverse and path speed: 30,000 mm/min Rapid traverse: max. 15 m/min Thrust at 100% duty cycle: 6,000 N Travel distance: 520 mm Ball screw size (∅ x pitch): 32 x 10 mm Feed override: 0 – 200% Rapid traverse override: 0 – 100% Spindle speed override: 50 – 120% MACHINE DETAILS Control: TX 8F Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Nominal current: 85 A Connection rating: 54 kW Power consumption: 39 kW Noise emission at operator position: 71 dB(A) Temperature range: 5 – 40 °C Max. humidity: 70% System hydraulic pressure: 60 bar Hydraulic tank capacity: 150 l Coolant pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Input Spindle speed input: 5 digits Cutting speed input: 4 digits Tool input: 4 digits Program number: 8 digits Subprogram number: 8 digits Block number: 4 digits M-codes: 3 digits B-codes: 6 digits Memory capacity: 32,000 characters Operating hours: 46,282 h (as of 17.10.2025) EQUIPMENT Two 10-station tool turrets with driven tool stations HAINBUCH chuck system Gedpjxpgl Aofx Ab Usca Counter spindle Bar feeder from STAMAG Chip conveyor

Condition: good (used), Year of construction: 1991, max. bar diameter: 42mm Chuck diameter: 40mm Gedpfx Absvy Uy Ho Ueca Diameter over cross slide: 160mm Speed range: 10-5000 rpm Turret with 12 stations (not driven) 12 Chip conveyor Bar loader FMB turbo 3000 max. bar length: 3m

Condition: used, TECHNICAL DETAILS Gcjdpfeuhawhsx Ab Uja - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Max. machining length : 130 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] - C axis indexing precision : 0,001 [°] - Number of spindle hours : 26.709 [h] COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] - C axis indexing precision : 0,001 [°] - Number of spindle hours : 16.854 [h] - Number of turrets : 2 UPPER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X stroke : 35 [mm] - Z stroke : 50 [mm] - Live tools speed : 8.000 [rpm] LOWER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X stroke : 35 [mm] * Y stroke : -9,5 / +28 [mm] - Live tools speed : 8.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 16 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.850 x 1.100 [mm] - Machine height : 1.480 [mm] - Machine weight : 2.000 [kg] EQUIPMENT - CNC : Traub TX 8i - Rotating guide bush - Parts catcher - Parts conveying strip - Chips conveyor : KNOLL 160 S-1 - Coolant tank : 500 [l] * with paper filtering unit - Bar loader : FMB Minimag 18 / 3200 C - Oil mist extractor : UAS SMOG HOG SH-05 - Number of fixed tool holders : 5

Condition: used, Year of construction: 1996, spindle passage 80 mm max. turning diameter 395 mm Max. Turning length 750 mm Godpfxexbtqvj Ab Ueca control System TX 8H max. Spindle speed 3.150 U/min. CNC lathe | TRAUB - TNA 400 The machine is in a well-maintained condition and can be inspected at any time under power. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA400 | TNA-400

Condition: used, Year of construction: 1997, spindle passage 80 mm Gcsdpfx Ajxbtpxjb Usa max. turning diameter 460 mm Max. Turning length 1.000 mm control System TX 8F max. Spindle speed 2.800 U/min. CNC lathe | TRAUB - TNA 500 The machine is in a well-maintained condition and can be inspected at any time under power. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA500 | TNA-500