Used Traub Tns for sale (99)

Condition: ready for operation (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center TX8D -TX 8D control system -COMPLETE TECHNICAL DATA – SEE PHOTOS -Year of manufacture: 1994 -Hydrobar tool magazine -Tailstock -Various powered tool holders -Three-jaw chuck -Tool holder -Complete documentation Knodpfxjzpf I As Adyjc Errors and omissions excepted.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, controller model: TX8H, swing diameter over cross slide: 445 mm, turning length: 1,000 mm, machine/vehicle number: 321, TECHNICAL DETAILS Spindle head according to DIN 55026: A8 Chuck diameter: 250/315 mm Spindle bore: 80 mm Knodpfx Ajz Im U Ssdyoc Turning length: 1,000 mm Swinging diameter over cross slide: 680 mm Swinging diameter over compound slide: 445 mm Main drive Motor power with direct drive: 31 kW Speed with direct drive: max. 2,800 min⁻¹ Motor power with 2-stage gearbox: 37 kW Speed with 2-stage gearbox: max. 3,150 rpm Tool holder W1 Number of tools: 12 Cylindrical tool shank according to DIN 69880: 40 × 63 mm Tool holder W2 Number of tools: 12 Cylindrical tool shank according to DIN 69880: 40 × 63 mm Swinging diameter over compound slide: 355 mm MACHINE DETAILS Control system: TX8H EQUIPMENT Tool holder W2 as an optional extra.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Traub CNC lathe TNS60, TX8D, year of manufacture 1990, serial no. 1403 C-axis, rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, through-hole chuck cylinder, collet chuck 185E, AMK drive. Very good condition, fully functional. Knsdpfxoz Eqmte Adyoc Machine geometry has been checked and corrected/adjusted. The machine was completely overhauled in 2019 and has had few operating hours since then; guide rails, spindle bearing, and ball screws are in top condition. Scrapers and belts have been checked and replaced. The machine can be inspected while powered on.

Year of construction: 1982, condition: ready for operation (used), General CNC slant bed lathe Traub is available. Tool stations: 12, tool holder: VDI40, turning diameter: 180mm, max. swing diameter: 450mm, max. turning length: 490mm, bar capacity: 60mm, travel X/Z: 160mm/490mm, rapid traverse: 15m/min, feed rate: 10m/min, machine dimensions X/Y/Z: approx. 3100mm/2000mm/1800mm, weight: approx. 4250kg, control: Traub System TX-8. An on-site inspection is possible. Knjdpey I Adbefx Adyjc

Condition: used, Year of construction: 1990, turning diameter 250 mm Knedpfx Aot Hwq Dodyjc turning length 450 mm control TX8D bore 80 mm spindle speed: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Please ask for further details.

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 180 mm turning length: 490 mm swing diameter: 450 mm cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device Knodpfxou Ix N Ss Adyoc The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet without tailstock i.D. *

Condition: used, Year of construction: 2002, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Machine Type: CNC short-stroke turning machine Manufacturer: Traub Model: TNK 36 Year of Manufacture: 2002 Loading Magazine Manufacturer: FMB Model: TURBO 5-42XT/4200/C Year of Manufacture: 2002 EQUIPMENT Kjdpfx As Aay Aajdyonc Knoll chip conveyor Compact belt filter for high pressure Parts conveyor belt Holder Driven tools Collets Various material reducers for the loading magazine Accessories required for operation

Condition: used, Year of construction: 2005, turning diameter 275 mm turning length 900 mm control TRAUB TX8i spindle passage 65 mm power capacity at 100 % load 25,20 kW power capacity at 40 % load 30,20 KW max. torque at 40% / 100% load 180 / 135 Nm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min worktool support No. 1 x-axis 290 mm y-axis 165 mm z-axis 600/950 mm B - axis 360 ° rapid traverse X/Y/Z 18 / 18 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN number of tools 2x2 + 2x2 number of driven tools 2x2 + 2x2 mm toolpiece turning speed range 8.000 / 2.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 4x18,6 / 4x74 Nm tool taper TRAUB Ø60 worktool support No.2 / No.3 / No.4 x-axis 170 mm z-axis 600/950 mm y-axis +/- 60 mm rapid traverse X/Y/Z 18 / 15 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN tool turret - number of stations 10 number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 18,60 Nm tool taper DIN 69880 Ø40x63 bar loader DNH61 / 3000 Bar length 1.000 - 3.200 mm bar material dia. 18 - 63 mm Knedpfo Ac Uu Nsx Adysc hexagon max.45 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m With TRAUB TX 8i control unit, main and counter spindle with C-axis, 3 turrets, 1 vertical-tool-carrier with B-axis, dust exhauster, chip conveyor, coolant system with coalescence-separator. Barfeeder TRAUB Stamag DNH61 /3000 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package Machine can be inspected under power.

Condition: used, Year of construction: 1992, operating hours: 27,221 h, functionality: fully functional, machine/vehicle number: 474, turning diameter over cross slide: 240 mm, turning length: 800 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 4,000 rpm, total height: 2,005 mm, total length: 2,953 mm, total width: 1,990 mm, type of input current: three-phase, overall weight: 4,300 kg, Last maintenance performed by INDEX-Werke GmbH & Co.KG on September 29, 2025. Kodpfx Aoz Ng I Ajdysnc Chuck diameter: 200 mm Main drive: 30 kW Speed range: 40-4000 rpm Spindle bore: 65 mm Turning diameter over cross slide: 240 mm Turning length: 800 mm Cross slide with turret Tool positions: 12 Slide travel, cross/longitudinal: 220/850 Powered tools: 6 Speed at the drive wheel: 4000 rpm Tailstock Arbor diameter / Arbor travel: 85 / 140 Mount according to DIN 228: MK5 Total power: 52 kW Machine weight: 4300 kg Dimensions (L/W/H): 2953/1990/2005 Technical data subject to change without notice. Errors and prior sale excepted.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Control system: Traub TX 8i Main spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Counter spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Tooling system Number of turrets: 2 (upper and lower turret) Knsdpfx Aez Erdtjdyec Tool positions per turret: 12 stations, without drive Front tool holder, 5-position, with Z3 slide, without drive Rear machining station (5 tools), without drive Bar loader: IEMCA BOSS 432/44

Condition: good (used), Internal item no.: 25088 Tool holder Thread whirling holder incl. cutting inserts Index / Traub No.: 12068219 The tool was used on a Traub TNL18 Very well-maintained condition! Ksdpexu Dcvsfx Adyenc

Year of construction: 1968, condition: used, Offered is a cam-controlled automatic lathe with bar feeder. Main spindle bore: Ø 60mm. Spindle speed: 160-1600rpm. Speed steps: 11. Distance between centers: 340mm. Center height: 125mm. Equipped with mechanical collet and bar feeder. Inspection possible by appointment. Kjdpfx Ado Aba Sweysnc

Year of construction: 2005, condition: good (used), 7-position tool holder for CNC lathes Manufacturer: TRAUB, Model TNA 480, tool holder size VDI 40. Kjdpfxohwnfko Adysnc Also compatible with SAUTER tool turrets with VDI 40 mounting. 7-position horizontal tool holder, positions no. 3/4/5/6/7/8/9 for drilling and milling, price per piece: 550,- € 2-position horizontal tool holder, positions no. 1 and 2 for tapping, price per piece: 600,- € 1 NC drilling chuck VDI 40, clamping range 1-13 mm, price: 100,- € 1 NC drilling chuck VDI 40, clamping range 2.5-16 mm, price: 150,- €

Year of construction: 2023, condition: ready for operation (used), An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling system, various grippers and gripper pairs, IoT, and management and monitoring software. This machine was never put into operation and is therefore in as-new condition. Documentation available. An on-site inspection is possible. Ksdpszkvkqefx Adysnc

Condition: used, Year of construction: 2016, controller manufacturer: Mitsubishi, controller model: TX8i-s, _____ Description: Year of manuf. : 2016 Control : Mitsubishi TX8i-s Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):35 kW Torque (max.):120 Nm Barcapacity:65 mm Workpiececlamping:Hainbuch Spanntop Kombi Axfix Gr. 65 Subspindle: Technology:Motor spindle, integrated in tool carrier II Speed:7.000 rpm :Power (max.):12 kW Torque (max.):22,5 Nm Chuck:Hainbuch Spanntop Kombi Axfix Gr. 42 Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:Traub ø45 mm Tooldrive:12.000 rpm, 10 kW, 8 Nm Movement in X/Y/Z:140/100/300 mm Toolcarrier II (X/Y/Z): Technology:Turret with 9 stations Taper:Traub ø45 mm Tooldrive:12.000 rpm, 10 kW, 8 Nm Movement in X/Y/Z:140/100/300 mm Backworking attachment: Ksdpoz A Nz Defx Adyonc Technology:Backworking attachment with 8 stations (2x synchron, 6x asynchron) Driven Tools:5 stations Tooldrive:12.000 U/min, 6,7 kW, 5,3 Nm Equipment/Accessory: Positionsensor:Direct Scales in X (up/down) Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbaletfilter and High-pressure, 80 bar Coolanttemperaturecontrol:Interface for external chiller prepared, Deltatherm Wasteheatmanagement:Interface for external chiller prepared Rawmaterialfeed:Barloader, FMB SL 80 V Finished part removal:Unloading device (NC-controlled) with coneyor belt Fireextinguishing unit:Kraft + Bauer Oilmistseparation:Electrostatic extraction LTA AC 3001 Further Accessory:Misc. used static and driven Toolholder

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm Knodpfxjyw H Szo Adysc - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: used, Year of construction: 2007, turning diameter 275 mm turning length 900 mm control TRAUB TX8i-s spindle passage 65 mm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min x-axis 175 mm z-axis 650/975 mm y-axis +/- 40 mm Kedpfxozwg Ndo Adyonc rapid traverse X/Y/Z 20 / 40 / 20 m/min feed capacity X/Y/Z 5,5 / 5,5 / 10 kN tool turret - number of stations 10 number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,50 kW max. torque at 25% load 17,50 Nm tool taper DIN 69880 Ø30x55 spindle diameter in front bearing 110 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m

Condition: used, Year of construction: 1987, operating hours: 80,678 h, functionality: fully functional, Description follows Knsdpfx Adox A Hl Asyec

Condition: good (used), Year of construction: 2003, CNC turning center TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64 bit) Flat screen monitor, 10.4 inches Additional V24 RS232 interface in the control cabinet MDE interface in the control cabinet (machine is running, piece counter) Tool monitoring for thread cutting without compensation chuck Knedpfxozaud As Adyjc Main spindle: Spindle bore 36 mm, maximum speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Quick-change parts Hainbuch, mounting aid, base body Quick-change device Hainbuch, manual Counter spindle: Counter spindle as a motor spindle with C-axis Device for counter pressure, workpiece ejection device, Axfix chuck Hainbuch Tool holder, top, driven tools, electronic gearbox X3 cross axis for front tool holder, front tool holder, 5-position, driven tools Cut-off station, driven tools Workpiece removal device: Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Coolant system: Tank 230 l / 7 bar / 50 l/min. Internal coolant supply 30 bar High pressure 120 bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Coolant gun Hinged belt chip conveyor, discharge height 950 mm Preparation for installation of bar feeder magazine (guide tube D25, D36) Workpiece stop, rotating (shank 16x16) Collision monitoring Brankamp CMS 100 on main and counter spindle Machine without known defects.

Condition: used, Year of construction: 2007, spindle passage 65 mm Max. Turning length 450 mm Spindle diameter in forward position 110 mm control System - TX8 I number of spindle speeds 4.000 U/min CNC lathe | TRAUB - TNC 42/65 equipped with bar loader. The machine is in a well-maintained condition. Knedszyvb Uopfx Adysc Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 | TNC 42/65

Condition: used, Year of construction: 2011, controller manufacturer: Mitsubishi, controller model: TX8i-s, _____ Description: Year of manuf. : 2011 Control : Mitsubishi TX8i-s Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power:22,6 kW Torque:180 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Subspindle: Kedpfx Adezr Dd Uoyjnc Technology:Motorspindle Speed:5.000 rpm Power:22,6 kW Torque:180 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Ejector:Hydraulic with flush Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier II (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier III (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter and Highpressure, 80 bar Coolanttemperaturecontrol:Interface for external chiller prepared, Deltatherm Rawmaterialfeed:Barlaoder, FMB SL 80S Finished part removal:Unloading device (NC-controlled) with coneyor belt Oilmistseparation:Electrostatic extraction, LTA AC3001 Further Accessory:Misc. used static Toolholder

Condition: good (used), functionality: fully functional, 1 x Multi-spindle lathe Manufacturer: Traub Model: TK 42 Year of manufacture: 1986 With tailstock Spindle gearhead Chip conveyor Part conveyor The machine can be inspected while powered on. Knsdpfxozz Iyle Adyec For an additional charge, a bar feeder can be supplied.

Condition: good (used), Year of construction: 1999, operating hours: 110,000 h, functionality: fully functional, spindle bore: 42 mm, Description follows Kjdpfx Aox A Ha Hodyenc

Year of construction: 2006, condition: used, Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible. Kodpfx Adjzuzzvsyenc

Condition: used, Year of construction: 2003, CNC long-turn lathe with bar feeder magazine, Stamag FMB Turbo 5-42 Control system: TX8i with Traub tool monitoring Main spindle: Kedpfx Adez Aqkcoyjnc - C-axis with driven tools - Mounting for driven guide bushing, max. passage 26 mm, stroke 225 mm - Electrical and pneumatic control for driven guide bushing Counter spindle: - Counter spindle as a motor spindle with hollow clamping and locking device with Z4 slide - C-axis - Tool carrier at the bottom, X1 / Y1 axes - 12 driven tool positions - Tool carrier at the top, X2 / Z2 axes - 12 driven tool positions - X3 - cross axis for front tool holder / counter spindle - Front tool holder, 5-position with Z3 slide, without tool drive - Cut-off station (5 tools) with X4 / Y4 axis, without tool drive - Articulated belt conveyor - Coolant system for externally and internally cooled tools, 20 l/min - 30 bar - System for deep-hole drilling with compact belt filter and coolant tank, 1000 L volume - Air deflection plates on the temperature control unit - Fire protection system for machining with cutting oil - Coolant mist extraction system