Used Traub Tns 30 for sale (109)

Condition: good (used), Year of construction: 2002, functionality: fully functional, 1 x CNC turning center Traub TNA 300 Year of manufacture: 2002 (Spindle hours: 40746) Control: System TX 8 H with bar feeder LNS Hydrobar + chip conveyor Knoll Well-maintained machine with an extensive range of accessories, in excellent optical and technical condition. Accessories 33 x VDI 30 tool holders for turret (11 of which are driven) 1 x additional collet chuck with spindle reduction sleeve 10 x collet 181 E 10 x collet 171 E Hjdswtlz Topfx Aazeu optional 1 x rotating steady rest in tailstock 1 x ATC optics Complete documentation The machine can be inspected while running.

Condition: ready for operation (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center TX8D -TX 8D control system -COMPLETE TECHNICAL DATA – SEE PHOTOS -Year of manufacture: 1994 -Hydrobar tool magazine -Tailstock -Various powered tool holders Hjdpfezpf I Ajx Aazsu -Three-jaw chuck -Tool holder -Complete documentation Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Traub CNC lathe TNS60, TX8D, year of manufacture 1990, serial no. 1403 C-axis, rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, through-hole chuck cylinder, collet chuck 185E, AMK drive. Very good condition, fully functional. Machine geometry has been checked and corrected/adjusted. The machine was completely overhauled in 2019 and has had few operating hours since then; guide rails, spindle bearing, and ball screws are in top condition. Hodpfx Aez Eqmteazeu Scrapers and belts have been checked and replaced. The machine can be inspected while powered on.

Year of construction: 1982, condition: ready for operation (used), General CNC slant bed lathe Traub is available. Tool stations: 12, tool holder: VDI40, turning diameter: 180mm, max. swing diameter: 450mm, max. turning length: 490mm, bar capacity: 60mm, travel X/Z: 160mm/490mm, rapid traverse: 15m/min, feed rate: 10m/min, machine dimensions X/Y/Z: approx. 3100mm/2000mm/1800mm, weight: approx. 4250kg, control: Traub System TX-8. An on-site inspection is possible. Hedsy I Adbopfx Aazju

Condition: used, Year of construction: 1990, turning diameter 250 mm turning length 450 mm control TX8D bore 80 mm spindle speed: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Hjdpfx Aast Hwq Dszou Please ask for further details.

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 180 mm turning length: 490 mm swing diameter: 450 mm Hodpfxeu Ix N So Aazou cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet without tailstock i.D. *

Condition: good (used), Year of construction: 2013, TX8i-s / WinFlexIPS Bar diameter up to Ø 32 mm Design allows for conversion between long and short turning Controlled axes: 9 Tool holder WRV on top, X/Y/Z dual drive Counter spindle with WRV on the bottom, separate drive Rear unit with drive Rated voltage 400 V, 3~, N, PE · 50 Hz Connection power 28 kVA, pre-fuse 63 A Recommended supply line: 16 mm² up to 30 m, otherwise 25 mm² Total drive power 46 kW · 73 A Compressed air requirement approx. 300 Nl/min Machine weight 6,850 kg Dimensions L × W × H 3,870 × 1,670 × 2,500 mm Safety standard EN ISO 23125, design type 3 small - Coolant lubrication with cutting oil — internal feed 30 bar, medium pressure 20 bar, high-pressure internal cooling 80–120 bar with its own pump - Coolant treatment system with strip filter (ELBARON) - Mist extraction and fume separator - Fire protection and extinguishing system — prerequisite for unmanned shifts with oil - Workpiece removal with linear unit (part gripper) - Incl. various clamping jaws - Linear measuring system in the X-axes - TRAUB tool monitoring and WinFlexIPS programming Hodpfx Ajzzahzjazsu - Bar loader FMB turbo 3-36 for bars up to 3,200 mm, with synchronous and displacement device - Chip conveyor, hinged belt - Color: Dust gray RAL 7037 Machine operating time approx. 30,600 hours Machine price without the shown accessories (extensive accessories can be purchased separately) Errors and prior sale excepted. The machine can be inspected under power with short notice.

Condition: excellent (used), Year of construction: 2023, operating hours: 6,739 h, functionality: fully functional, machine/vehicle number: 11920252, turning diameter over cross slide: 20 mm, turning length: 205 mm, turning diameter: 20 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1 rpm, spindle motor power: 5,500 W, rotational speed (min.): 1 rpm, rotational speed (max.): 10,000 rpm, total height: 2,350 mm, total length: 2,970 mm, total width: 2,000 mm, overall weight: 5,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, We are selling our TRAUB TNL 20, including an automatic bar feeder and a swiveling B-axis turret. The machine was used in our medical technology division and is in very good technical condition. It has been regularly maintained and is currently still in production. Due to a restructuring of our machine park, we are selling the machine. The TNL 20 is ideally suited for demanding turning and milling operations and, thanks to the B-axis, also enables the machining of complex geometries in a single setup. The main and counter spindle, as well as driven tools, allow many machining steps to be efficiently combined. Technical data: TRAUB TNL 20 Hedpfxozwmvke Aazeu Automatic bar feeder Swiveling B-axis turret Main and counter spindle Driven tools Bar diameter up to 20 mm Simultaneous machining possible Suitable for long and short turned parts Particularly suitable for: Medical technology Precision engineering Precision turned parts Small and medium-sized series Complex turning and milling parts The machine has reliably served us for many years and impresses with its precision and versatile machining capabilities. A test run can be arranged upon request. We will gladly send additional images, technical documents, and information on tool packages or accessories upon request.

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports Hsdpfowp D Nbjx Aazsu dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, spindle speed (max.): 5,600 rpm, travel distance X-axis: 140 mm, travel distance Z-axis: 520 mm, spindle motor power: 18,500 W, type of input current: three-phase, overall weight: 5,600 kg, bar passage: 42 mm, input current: 85 A, number of tool turrets: 2, number of tool stations in tool turret 1: 14, number of driven tool stations in tool turret 1: 14, number of tool stations in tool turret 2: 14, number of driven tool stations in tool turret 2: 14, CNC Lathe TRAUB TNC 42/65 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2009 CNC control: TRAUB TX8i Number of axes: 8 Stroke Y axis: +/- 35 [mm] Stroke Z1 axis: 450 [mm] Hjdszh D Aijpfx Aazeu Stroke X1 axis: 140 [mm] Stroke Z2 axis: 520 [mm] Stroke X2 axis: 140 [mm] Stroke E axis: 450 [mm] Spindle throughbore: 42 [mm] Max. spindle speed: 5600 [rpm] Increment C-axis: 0.001 [°] Spindle power: 18.5 [kW] Counter spindle throughbore: 42 [mm] Max. counter spindle speed: 5600 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 11 [kW] Type of tool holders: VDI 30 Number of tool stations - Turret 1: 14 Number of tool stations driven - Turret 1: 14 Max. speed driven tools - Turret 1: 4000 [rpm] Number of tool stations - Turret 2: 14 Number of tool stations driven - Turret 2: 14 Max. speed driven tools - Turret 2: 4000 [rpm] Total power required: 107 [kVA] Rated current: 85 [A] Supply voltage: 400 [V] Weight: 5600 [Kg] INCLUDED EQUIPMENT: x1 Set of collets x1 Set of tool holders x1 Chip conveyor x1 IRCO PROFIMAT ECO 42.6 bar feeder x1 KNOLL coolant system Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine tool similar to turning and milling centers, machining centers and milling machines, including brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG and Mazak. CNC lathe, CNC turning center, CNC turning machine, machining center, CNC milling machine, CNC machining center, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Control system: Traub TX 8i Main spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Counter spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Tooling system Number of turrets: 2 (upper and lower turret) Tool positions per turret: 12 stations, without drive Front tool holder, 5-position, with Z3 slide, without drive Hsdpfsz Erdtjx Aazju Rear machining station (5 tools), without drive Bar loader: IEMCA BOSS 432/44

Condition: used, Year of construction: 2003, CNC long-turn lathe with bar feeder magazine, Stamag FMB Turbo 5-42 Control system: TX8i with Traub tool monitoring Main spindle: - C-axis with driven tools - Mounting for driven guide bushing, max. passage 26 mm, stroke 225 mm - Electrical and pneumatic control for driven guide bushing Hjdpfx Aasz Aqkcozou Counter spindle: - Counter spindle as a motor spindle with hollow clamping and locking device with Z4 slide - C-axis - Tool carrier at the bottom, X1 / Y1 axes - 12 driven tool positions - Tool carrier at the top, X2 / Z2 axes - 12 driven tool positions - X3 - cross axis for front tool holder / counter spindle - Front tool holder, 5-position with Z3 slide, without tool drive - Cut-off station (5 tools) with X4 / Y4 axis, without tool drive - Articulated belt conveyor - Coolant system for externally and internally cooled tools, 20 l/min - 30 bar - System for deep-hole drilling with compact belt filter and coolant tank, 1000 L volume - Air deflection plates on the temperature control unit - Fire protection system for machining with cutting oil - Coolant mist extraction system

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 9 - Number of turrets : 2 MAIN SPINDLE - Spindle power : 6.7 / 10.7 [kW] - Spindle speeds : 8000 [rpm] - Max. bar diameter : 32 [mm] - Z stroke : 305 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 3.7 / 5.5 [kW] - Spindle speeds : 6400 [rpm] - Max. bar diameter : 30 [mm] - C axis indexing precision : 0.001 [°] - X stroke : 140 [mm] - Z stroke : 300 [mm] TURRET 1 - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 12 000 [rpm] - Live tools power : 3.4 [kW] - X/Z stroke : 140/300 [mm] - Y stroke : -40/+25 [mm] TURRET 2 - Number of positions : 10 Hodpfxoypxqre Aazeu - Number of motorized positions : 10 - Live tools speed : 12 000 [rpm] - Live tools power : 3.4 [kW] - X/Z stroke : 140/320 [mm] - Y stroke : -25/+40 [mm] POWER SUPPLY - Total installed power : 28 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3870 x 1670 [mm] - Machine height : 2500 [mm] - Machine weight : 6000 [kg] MACHINE HOURS - Number of hours under power : 23240 [h] - Number of working hours : 19500 [h] EQUIPMENT - CNC : Traub TX 8i-p - 3 colors status lamp - Coolant tank : 500 [l] * with high-pressure pump : 3,8,20 [bars] * with paper filtering unit - Chips conveyor - Parts catcher - Parts conveying strip - Predisposition for barfeeder

Condition: ready for operation (used), Year of construction: 2012, operating hours: 6,542 h, spindle motor power: 24,000 W, spindle speed (max.): 5,000 rpm, overall weight: 9,500 kg, number of axes: 11, This 11s TRAUB TNX 65/42 was manufactured in 2012. It features a maximum turning diameter of 175 mm and a turning length of 650 mm. The machine is equipped with a powerful main spindle speed of up to 5,000 rpm and a counter spindle speed of up to 7,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the TRAUB TNX 65/42 turn-mill centre we have for sale. Contact us for further details. • Working hours: 26,946 h • Max. turning diameter: 175 mm • Max. turning length: 650 mm • Main spindle bar capacity / bore: 65 mm • Max. spindle torque: 275 Nm • Counter spindle speed: up to 7,000 rpm • Counter spindle bar capacity: 42 mm • Tool turrets: 2 × 10 positions • Rapid traverse X-axis: 30 m/min • Rapid traverse Z-axis: 40 m/min Hodpfx Aasz Dk Riezou • Rated power: 83 kW • Connected load: 68 kVA • Power supply: 400 V, 3~, N, PE, 50 Hz • Rated current: 134 A Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump Hedpeyw H Szjfx Aazeu * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 12 - Number of turrets : 3 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 24 [kW] - Spindle speeds : 5.000 [rpm] - Max. bar diameter : 65 [mm] - Max. chuck diameter : 175 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 28 [kW] - Spindle speeds : 7.000 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0,001 [°] - Travel : 700 [mm] UPPER LEFT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 175 / 650 [mm] - Y stroke : +/- 40 [mm] - Tool type : VDI 30 - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] LOWER LEFT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 175 / 650 [mm] - Y stroke : +/- 40 [mm] - Tool type : VDI 30 - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] LOWER RIGHT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 175 / 650 [mm] - Y stroke : +/- 40 [mm] - Tool type : VDI 30 - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 95 [kW] WEIGHT & DIMENSIONS - Machine floor space : 5.450 x 2.318 [mm] - Machine height : 2.258 [mm] - Machine weight : 10.000 [kg] MACHINE HOURS - Number of working hours : 50000 [h] EQUIPMENT Hodpfx Aaeuhadzjzju - CNC : Traub TX8i-S - Electronic handwheel - 3 colors status lamp - Coolant tank : RESY * with high-pressure pump * with paper filtering unit - Chips conveyor - Parts catcher - Parts conveying strip - Number of turning tool holders : 6 - Number of fixed tool holders : 33 - Collet chuck : 2 HAINBUCH

Condition: used, Year of construction: 2005, turning diameter 275 mm turning length 900 mm control TRAUB TX8i spindle passage 65 mm power capacity at 100 % load 25,20 kW power capacity at 40 % load 30,20 KW max. torque at 40% / 100% load 180 / 135 Nm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min worktool support No. 1 x-axis 290 mm y-axis 165 mm z-axis 600/950 mm B - axis 360 ° rapid traverse X/Y/Z 18 / 18 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN number of tools 2x2 + 2x2 number of driven tools 2x2 + 2x2 mm toolpiece turning speed range 8.000 / 2.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 4x18,6 / 4x74 Nm tool taper TRAUB Ø60 worktool support No.2 / No.3 / No.4 x-axis 170 mm z-axis 600/950 mm y-axis +/- 60 mm rapid traverse X/Y/Z 18 / 15 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN tool turret - number of stations 10 number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 18,60 Nm tool taper DIN 69880 Ø40x63 bar loader DNH61 / 3000 Bar length 1.000 - 3.200 mm bar material dia. 18 - 63 mm hexagon max.45 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m With TRAUB TX 8i control unit, main and counter spindle with C-axis, 3 turrets, 1 vertical-tool-carrier with B-axis, dust exhauster, chip conveyor, coolant system with coalescence-separator. Barfeeder TRAUB Stamag DNH61 /3000 2 pc. 3-jaw chuck SMW KNCS-N 170-43 Hjdpfsw E Nnbsx Aazou 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 55,000 h, spindle speed (max.): 8,000 rpm, overall weight: 7,000 kg, controller manufacturer: TRAUB, controller model: TX8i-s, number of axes: 7, This 7-axis TRAUB TNL 32-7 horizontal turning machine was manufactured in 2013. Ideal for precision turning operations, it offers robust performance and reliability. Consider the opportunity to buy this TRAUB TNL 32-7 horizontal turning machine. Contact us for more information. Additional equipment • Coolant pump 3 bar / Coolant pump 8 bar • Swarf conveyor, hinged belt type H=1000 mm • Linear encoder X-axis for revolver top/bottom • Fabric filtration for coolant: grade of filtration ca. 30-40 µm • High-pressure coolant pump 20 bar • CO2 fire fight system Kraft & Bauer Hodpfoyrd H Dox Aazeu Machine Benefits Technical Machine Benefits • Max bar diameter: 32 mm • Spindle stock stroke: 305 mm • Auto bar loader: fmb lsk38-3200, max. Bar length 3200 mm • Top revolver: x/y/z/h-axis, 10 tools dual drive • Bottom revolver: x/y/z/h-axis, 9 tools same drive; counter spindle independent drive • Conveyor belt for finished parts with gripper • Machine worked only with cutting oil

Condition: good (used), Year of construction: 2003, CNC turning center TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64 bit) Flat screen monitor, 10.4 inches Additional V24 RS232 interface in the control cabinet MDE interface in the control cabinet (machine is running, piece counter) Tool monitoring for thread cutting without compensation chuck Main spindle: Spindle bore 36 mm, maximum speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Hodpjzaud Aofx Aazeu Quick-change parts Hainbuch, mounting aid, base body Quick-change device Hainbuch, manual Counter spindle: Counter spindle as a motor spindle with C-axis Device for counter pressure, workpiece ejection device, Axfix chuck Hainbuch Tool holder, top, driven tools, electronic gearbox X3 cross axis for front tool holder, front tool holder, 5-position, driven tools Cut-off station, driven tools Workpiece removal device: Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Coolant system: Tank 230 l / 7 bar / 50 l/min. Internal coolant supply 30 bar High pressure 120 bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Coolant gun Hinged belt chip conveyor, discharge height 950 mm Preparation for installation of bar feeder magazine (guide tube D25, D36) Workpiece stop, rotating (shank 16x16) Collision monitoring Brankamp CMS 100 on main and counter spindle Machine without known defects.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 147,007 h, spindle speed (max.): 6,300 rpm, travel distance X-axis: 370 mm, travel distance Z-axis: 250 mm, spindle motor power: 10,700 W, bar diameter (max.): 36 mm, controller manufacturer: TRAUB, controller model: TX8i (64-bit), workpiece diameter (max.): 32 mm, number of slots in tool magazine: 22, number of axes: 10, This 10-axis TRAUB TNK 36 horizontal turning machine was manufactured in 2002. It features a main spindle speed of 6,300 rpm and a counter spindle speed of 6,300 rpm. The machine includes a maximum workpiece diameter of 32 mm and a coolant tank capacity of approximately 360 liters. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 machine we have for sale. Contact us for further details. • 14" flat screen • Additional V24 RS232 interface in the electrical cabinet • MDE interface in the electrical cabinet (machine status and parts counter) • Rigid tapping without compensation chuck • Polyform function for C-axis • Tool monitoring • Main spindle bore: 36 mm • Main spindle drive power: AC 6.7 / 10.7 kW • Main spindle C-axis • Motorized counter spindle • Counter spindle bore: 32 mm • Counter spindle speed: 6,300 rpm • Counter spindle Z-axis travel: 250 mm • Counter spindle Z-axis rapid traverse: 30 m/min • Counter spindle C-axis • Counter clamping pressure device • Workpiece ejector • Increased feed force • Hainbuch Axfix chuck • X2 travel: 50 mm • Y2 travel: ±20 mm • Z2 travel: 100 mm • X2 rapid traverse: 15 m/min • Y2 rapid traverse: 15 m/min • Z2 rapid traverse: 15 m/min • 12 driven tools (via central drive) • Driven tool speed: 6,000 rpm • Electronic gearbox • X3 travel: 370 mm • Z3 travel: 250 mm • X3 rapid traverse: 30–60 m/min • Z3 rapid traverse: 30 m/min • 5 driven tools • Tool holder diameter: 40 mm • Driven tool speed: 6,000 rpm • Increased feed force • X4 travel: 73 mm • Y4 travel: ±50 mm • X4 rapid traverse: 15 m/min • Y4 rapid traverse: 15 m/min • 5 driven tools • Tool holder diameter: 40 mm • Driven tool speed: 6,000 rpm • Left-hand workpiece conveyor • Pneumatic workpiece gripper • Gripper jaws: Ø5–8 mm / Ø8–20 mm / Ø20–36 mm • Maximum workpiece length: 200 mm • Maximum workpiece diameter: 32 mm • RESY compact belt filter • Cooling unit • Coolant tank capacity: approx. 360 l • Coolant pressure: 7 bar • Coolant flow rate: 50 l/min • Through-tool coolant: 30 bar • Coolant gun • Connected load: 22 kW Optional equipment, not included: • KNOLL 240S-1/100 hinged belt chip conveyor (discharge height: 950 mm) • Bar feeder preparation (guide tubes Ø25 / Ø36) • Rotating workpiece stop (16 × 16 mm shank) • Brankamp CMS 100 collision monitoring (main and counter spindle) Hodpfx Aszl S Emoazsu • FMB Turbo 5-42 XT / 3200 "C" bar feeder • Basic set of static and driven tool holders included Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2011, 5 machines are only sold as a PACKAGE. Includes a large set of tool holders, fixed + driven. 1. CNC turning center, 3 units Hedpfx Aajzxhxvjzeu Manufacturer: Traub Type: TNL 26 Year of manufacture: 2011 / 2008 / 2006 Operating hours: 64,154 / 75,849 / 81,823 Control: Mitsubishi TX 8i Equipment: - Main spindle - Counter spindle - Upper turret - driven + Y-axis - Lower turret - driven + Y-axis - Front tool holder - driven + Y-axis - Rear tool holder - Bar loader 2x FMB / 1x Breuning Includes tools for the TRAUB machines Tools + clamping devices: - 54 x driven tool holders - 181 x fixed tool holders - Collets, etc. See photos The machines come from ongoing production. 2. CNC lathe, 2 units, one defective Manufacturer: EMCO Type: Turn 332 MC Year of manufacture: 2010 / 2008 Operating hours: unknown Control: Siemens Sinumerik 840D Equipment: - Main spindle - Counter spindle - Upper turret - Lower turret - Bar loader TOP ETL 8-45 One machine comes from ongoing production, one has already been used as a source of spare parts, several components have been removed. Dismantling and loading can be organized by a specialist company for an additional fee.

Condition: good (used), Internal item no.: 25088 Tool holder Thread whirling holder incl. cutting inserts Index / Traub No.: 12068219 The tool was used on a Traub TNL18 Hjdpfsxu Dcvox Aazju Very well-maintained condition!

Condition: used, Year of construction: 2016, controller manufacturer: Mitsubishi, controller model: TX8i-s, _____ Description: Year of manuf. : 2016 Control : Mitsubishi TX8i-s Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):35 kW Torque (max.):120 Nm Barcapacity:65 mm Workpiececlamping:Hainbuch Spanntop Kombi Axfix Gr. 65 Subspindle: Technology:Motor spindle, integrated in tool carrier II Speed:7.000 rpm :Power (max.):12 kW Torque (max.):22,5 Nm Chuck:Hainbuch Spanntop Kombi Axfix Gr. 42 Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:Traub ø45 mm Tooldrive:12.000 rpm, 10 kW, 8 Nm Movement in X/Y/Z:140/100/300 mm Toolcarrier II (X/Y/Z): Technology:Turret with 9 stations Taper:Traub ø45 mm Hedpoz A Nz Dsfx Aazeu Tooldrive:12.000 rpm, 10 kW, 8 Nm Movement in X/Y/Z:140/100/300 mm Backworking attachment: Technology:Backworking attachment with 8 stations (2x synchron, 6x asynchron) Driven Tools:5 stations Tooldrive:12.000 U/min, 6,7 kW, 5,3 Nm Equipment/Accessory: Positionsensor:Direct Scales in X (up/down) Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbaletfilter and High-pressure, 80 bar Coolanttemperaturecontrol:Interface for external chiller prepared, Deltatherm Wasteheatmanagement:Interface for external chiller prepared Rawmaterialfeed:Barloader, FMB SL 80 V Finished part removal:Unloading device (NC-controlled) with coneyor belt Fireextinguishing unit:Kraft + Bauer Oilmistseparation:Electrostatic extraction LTA AC 3001 Further Accessory:Misc. used static and driven Toolholder

Condition: good (used), functionality: fully functional, 1 x multi-spindle automatic lathe Traub TD 26 with boring unit + tool magazine Hedez Agyaepfx Aazeu Iemca AS 325/32 CT Year of manufacture: 1992 + chip conveyor The machine can be inspected while powered on.

Condition: good (used), functionality: fully functional, 1 x Multi-spindle lathe Traub TD 26 with loading magazine Iemca Boss 432/32 Year of manufacture: 2002 + Chip conveyor GS Industrietechnik K-I-150 Year of manufacture: 2017 Equipment: Drill chuck pneumatic workpiece clamping (Wachtler) Hjdpfozz Nf Njx Aazju