Used Treatment for sale (771)

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied Fodpov Si Szefx Aa Eofw 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2025, functionality: fully functional, nominal heat output: 930 kW (1,264.45 HP), temperature: 1,000 °C, type of input current: three-phase, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, Car bottom combustion furnace (powered by natural gas or LPG) model ST/BT for heat treatments of ferrous metals such as cast iron or steels at temperatures up to 1000°C, complete with one removable trolley and an automatic control and command panel. Furnace suitable for quenching, tempering, hardening, annealing, normalizing, stress relieving, preheating, etc. CE certification declaration 12-month warranty Ffodpfxow Ifl Tj Aa Esw Brand new machine, made in Italy Specifications and attached photos are for reference only; custom-built machines tailored to each specific thermal process are available.

Condition: used, Year of construction: 2008, Air consumption 42,83 m³/min Motor output 250 kW Overall size 4000 x 2100 x 2500 mm Ffsdpfx Aaovx Uvls Esw 0 min. 4 bar 0 max. 13,5 bar Weight 20.000 kg Dimensions (LxWxH) 13,00 x 2,95 x 2,90 m The pneumatic container is used to provide oil-free dry Compressed air (42 m³/min max. 7.5 bar) for test facilities and consists of a self-contained container functional unit, in which the following Machines, as shown schematically in Figure 2, were integrated: - Compressor EKO 250 D - Refrigeration dryer HHDp 4500/HF 5-M/5 - Activated carbon adsorber BEKO Clearpoint L 3400 V - Post-filter HF 6-60 - Oil-water separator BEKO Öwamat 16 - El. Steam trap BEKO 14

Year of construction: 2014, condition: new, functionality: fully functional, Biorock D10 small wastewater treatment plant for 10 PE, consisting of a plastic tank with a filter layer, aeration and sampling shaft, and a filter brush. Maximum capacity: 10 PE Primary treatment: > 5,000 l Bioreactor: 3,000 l Ffsdpev Iv U Ujfx Aa Eew In mint condition, installed but not yet commissioned.

Condition: new, Year of construction: 2022, operating hours: 5 h, functionality: fully functional, overall weight: 290 kg, total length: 1,430 mm, total width: 660 mm, total height: 1,250 mm, fuel type: electric, volume flow: 15 m³/h, noise level: 54 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Scroll compressor with integrated compressed air treatment system Manufacturer: AIRPOL (Poland) - 2022 Model: SRKT 2 The compressor delivers oil-free air, dried to a pressure dew point of +3°C. Operating hours: 5h Overpressure: 0.8 MPa Capacity: 14.4 m³/h Dimensions (L x W x H): 1430 x 660 x 1250 mm Compressed air connection: G½ Weight: 290 kg Tank capacity: 240 litres Ambient temperature range: +5 to +40°C Cooling air requirement: 400 m³/h Compressed air temperature: approx. 15°C above ambient temperature Refrigerant: R134A - 0.35 kg Noise level: 54 dB(A) Drive transmission: belt drive Nominal motor power: 2.2 kW Motor energy efficiency class: IE3 Ffedpfxexyhdbe Aa Eow Motor protection rating: IP55 Power supply: 400/3/50 V/Ph/Hz Recommended supply cable cross-section: 5x1.5 mm² Protection: A16 Dryer pressure dew point: +3°C Compressed air purity class according to ISO 8573.1: 1.4.1 Microprocessor controller: MS-286 Airpol Power Control

Condition: good (used), Year of construction: 1991, functionality: fully functional, load capacity: 650 kg, EROS SIZE 7 furnace for carburizing, carbonitriding and quenching. Refractory exchanged with Kanhtal resistors. Useful dimensions. 700x450x1150mm Chamber dimensions: 750x560x1540 mm Outer dimensions (layout) 2500x 3715x 4500 mm Furnace heating power: 85 kW Oil heating power : 35KW Furnace working temperature : 20-950ºC Cesats dimensions: 700x1150x150 mm (capacity 3 superimposed baskets) Oil tank capacity: 4500 liters Maximum load approx : 600-650 kg Control equipment UDC-5000 (potential carbon control) Carbon sensor rod (with co2 cleaning) Ffodpfju A Tf Dex Aa Eew Few hours of use

Year of construction: 2010, condition: refurbished (used), Vacuum furnace for heat treatment of metals with a molybdenum chamber. A high vacuum of 10^-6 mbar is achieved in the furnace. Maximum operating temperature 1300 C. Dimensions of the working chamber: 0.35 x 0.42 m diameter x height. Molybdenum heating chamber. Closed circuit cooling system with a buffer tank Pumping system with a mechanical and turbomolecular pump. Ability to perform processes: • Annealing in high vacuum • Stress relief • Vacuum brazing • Vacuum brazing • etc. The stove is 100% functional after modernization. Sales with installation and commissioning at the customer's place. The final price depends on the scope of modernization, agreed individually with the client. Ffodpfx Aaon Snx Ho Eew If you have any questions, please contact us.

Condition: good (used), functionality: fully functional, Year of construction: 2002, • 4 new EDI cells MK3 are available. Fjdpfewy Uu Aex Aa Esfw • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled.

Year of construction: 2009, condition: good (used), Section of tubular ultrafiltration able to treat about 36 mc/g of product Ffsdotv Dx Eepfx Aa Esw

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Ffedpfowmm U Usx Aa Eow

Year of construction: 2025, condition: new, NIMF-15 treatment chamber integrated in a 20-foot sea container. Capacity 130 Europalets, or +/- 10m3 of wood It is sent totally finished, arrive, place power supply and start working. Fjdpfjhw Nryjx Aa Eefw Very fast and economical model performing the heat treatment. Approved program in all countries, with 3, 4 and 5 probes. 1 year warranty

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Temperature controller adjustable up to 1100°C Ffedouhmacspfx Aa Ejw +temperature controller in the electrical box

Condition: new, Timber driers any capacity, own technology, more than 70 years experience. More than 500 machines all over the world. Ffsdpfsk D S Npox Aa Esw Machines for treatment ISMP-15.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: GE-KEK-100L, 🔧 Manual Spray Chemical Pretreatment Cabin – 1.6 × 1.6 × 2.2 m – 800 L • Cabin dimensions: 1,600 × 1,600 × 2,200 mm • Chemical tank: ~800 L • Pump/spray unit: ST 84 HE • Heating elements: 2×6 kW (water temperature: 45–60 °C) • Motor: ~1.5 kW • Power connection: 3×380/220 V, IP68 protection • Manual spray operation, automated circulation, rinsing. Closed system for safe chemical handling Ffjdpfx Asw Nvykoa Esw • Spring tray technology – for direct pretreatment prior to powder coating Condition: Excellent, complete unit, EU standard control, documented operation Price: €10,900 + VAT

Year of construction: 2006, condition: good (used), machine/vehicle number: 3206, HEAT TREATMENT FURNACES CMS ITALIA model DMH 7, MFG: 2006, serial no. 3206 - installed power 15Kw - supply voltage 220V - maximum temperature 1000 °C; - useful width 450 mm - useful height 250 mm - room depth 800 mm - current absorption 39.5 A Ffodpfx Aoldfgpea Esw - frequency 50 Hz Price Euro 4.300 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Complete Heat Treatmet House for Sale The Line includes ; (All modernised at 2023) 1. 1 ea AKF1 IPSEN TQF 4 EM 1977 Athmosphere Controlled Furnace 2. 1 ea AKF2 IPSEN TQFRA 5 EM 1991 Athmosphere Controlled Furnace Fsdow Dhuqopfx Aa Eofw 3. 1 ea AKF3 IPSEN T4 EM 1972 Athmosphere Controlled Furnace 4. 1 ea AKF4 IPSEN TU-5 EM 1970 Athmosphere Controlled Furnace 5. 1 ea HSH 2011 Stress Releiving, Bright Annealing 6. 1 ea Ipsen Dac 5 ER 2011 Nitration, stress releiving 7. 1 ea Ipsen DAC 4 1980 Stress Releiving, Bright Annealing 8. 1 ea HSH 2007 Stress Releiving, Bright Annealing 9. 1 ea BOREL 1987 Pit Type Stress Releiving 10. 2 ea Ipsen 1972 model Stress Releiving 11. 1 ea Loading Car 12. 1 ea Unloading Car All furnaces has already beed dismantled and ready for shiping.

Condition: ready for operation (used), functionality: fully functional, HEAT TREATMENT FACILITY WITH SCADA CONTROL SYSTEM AKF1 İPSEN TQF 4 EM 1977 model Atmosphere controlled Chamber type furnace (1 Piece) • AKF2 İPSEN TQFRA 5 EM 1991 model Atmosphere controlled Chamber type furnace (1 Piece) • AKF3 İPSEN T4 EM 1972 model Atmosphere controlled Chamber type furnace (1 Piece) • AKF4 İPSEN TU-5 EM 1970 model Atmosphere controlled Chamber type furnace (1 Piece) • HSH 2011 model high temperature stress relief, bright annealing (1 Piece) Fsdpfxswgmp Sj Aa Eefw • İpsen Dac 5 ER 2011 model nitriding, high temperature stress relief (1 Piece) • İpsen DAC 4 1980 model high temperature stress relief, bright annealing (1 Piece) • HSH 2007 model high temperature stress relief, bright annealing (1 Piece) • BOREL 1987 model well stress relieving furnace (1 Piece) • 1972 model Ipsen stress relieving furnace (2 Pieces) • Loading car (1 Piece) • Unloading car (1 Piece)

Condition: used, Used edible oil refinery with capacity 150 tonnes/day of edible oils. Plant includes (3) GEA type RSB100-01-076 separators that can produce 300 tons/day, but the rest of the plant is maximum 150 tons/day. Refinery can process soya, rapeseed, peanut; and also sunflower and corn oil because it includes winterisation step for waxes separation. Fodpfx Aasyhc Ryj Ejfw Major equipment / sections include:- neutralisation, caustic soda dosing, separation for dewaxing, filtration, deodorisation, biomass boiler, water treatment system.

Condition: used, Used 2 MW wood biomass power plant built in 2009 and running until February 2023. Plant is made up of a steam boiler that uses forest waste as fuel and a condensing steam turbine generator, electrical room, control room. Fedpfxsyhc Irj Aa Ejfw Main equipment includes: - Biochamm BCV-11.0000 CA biomass boiler built in 2008 with approximately 23,665 hours of use. - Boiler feed system made in 2008 with approximately 22,549 hours of use. - Atlas Copco compressors made in 2008. - Water treatment plant made in 2008. - Hamworthy condenser made in 2008 with 22,539 hours of use. - Siemens SST-110 (TWIN AFA46 GT6) steam turbine made in 2008, with 22,539 hours of use and 563 starts. - Leroy Somer L57 54 m7/41 alternator made in 2008 with 22,539 hours of use. - EWK cooling towers made in 2008 with approximately 23,102 hours of use. - Fivemasa HVAC made in 2008. Available for relocation or in-situ with land and buildings.

Year of construction: 2019, condition: used, Dimension:: 2100x1900x2500 mm Working width: approximately 600 mm Cutting rotor drive power: approx. 18.5 kW Feed roller drive power: 5.5 kW Ffsdsyrghdjpfx Aa Esw Number of strands (H version): 66 - 80 (typical) Underwater water flow rate: 35 m³/h Throughput (theoretical): up to about 11 000 kg/h (depending on material) In service on 2021 Pulling speed (draw-in): 80 - 350 m/min Condition: machine is disassembled and not complete Online auction of high-value industrial assets, including a YORK water-cooled chiller, MAAG plastic granulator, pumps (Grundfos, Rheinhütte), Ekopak water treatment, industrial blowers & fans, dosing and weighing systems, electric motors (ABB, VEM), packaging materials (Octabin, Big Bags) and miscellaneous laboratory equipment as a result of the liquidation of textile manufacturer Nyobe-Belgotex. The online auction opens Monday 9 February and closes Thursday 19 March. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 3 March Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2024, operating hours: 3,128 h, condition: used, Serial number: PNLM011315 Water-cooled centrifugal chiller with magnetic bearings and variable speed drive(VSD) Model: PYT0420GXN01ZC30B04MLZ-43A VSD serial number: 50682K33431390 Capacity: 127Hz Control panel / breaker ref:50682H33339263 Fodpfx Aasyrgg To Eefw Refrigerant: R-1233zd(E) Refrigerant has been removed from the machine Working hours: 3128 hours Capacity: between 700 and 1200 tons cooling capacity Connection: 400 V - 3-phase - 50 Hz With control OptiView™ touchscreen control panel with i-SMART connectivity Evaporator FC3914-B2V641-2, Condenser CB2914-13T496-2 Piping and pumps are not included in the lot Size: 5400x2500x3200 mm Online auction of high-value industrial assets, including a YORK water-cooled chiller, MAAG plastic granulator, pumps (Grundfos, Rheinhütte), Ekopak water treatment, industrial blowers & fans, dosing and weighing systems, electric motors (ABB, VEM), packaging materials (Octabin, Big Bags) and miscellaneous laboratory equipment as a result of the liquidation of textile manufacturer Nyobe-Belgotex. The online auction opens Monday 9 February and closes Thursday 19 March. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 3 March Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2019, condition: used, Dimension:: 2100x1900x2500 mm Working width: approximately 600 mm Cutting rotor drive power: approx. 18.5 kW Feed roller drive power: 5.5 kW Fjdpfx Aasyrggyo Esfw Number of strands (H version): 66 - 80 (typical) Underwater water flow rate: 35 m³/h Throughput (theoretical): up to about 11 000 kg/h (depending on material) Pulling speed (draw-in): 80 - 350 m/min Condition: machine is disassembled and not complete Online auction of high-value industrial assets, including a YORK water-cooled chiller, MAAG plastic granulator, pumps (Grundfos, Rheinhütte), Ekopak water treatment, industrial blowers & fans, dosing and weighing systems, electric motors (ABB, VEM), packaging materials (Octabin, Big Bags) and miscellaneous laboratory equipment as a result of the liquidation of textile manufacturer Nyobe-Belgotex. The online auction opens Monday 9 February and closes Thursday 19 March. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 3 March Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2013, 2013 | Hiebenthal TTH 18 | Used Low Bed Semi-trailer 📍Location: Germany, Rodgau 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 13500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 11 inspection points 6 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Functional - needs some attention and rust treatment 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39981 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Ffsdpfx Asx Dyyvoa Eew We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 265,000 km, power: 62 kW (84.30 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,000 kg, first registration: 03/2013, emission class: euro5, color: white, number of seats: 9, Year of construction: 2013, total length: 5,391 mm, total width: 1,904 mm, total height: 1,990 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, For sale is a well-maintained Volkswagen T5 Kombi Long Wheelbase featuring the globally popular 2.0-liter diesel engine. * The vehicle is in good condition! * German specification vehicle * Regularly serviced * Euro 5 emissions standard * 1st owner * Full service history Equipment: Long Wheelbase * L2-H1 * 9 seats (2 individual seats, 2-seater bench, 2-seater bench, 3-seater bench) * Air conditioning * Passenger airbag * M1 approval (passenger car homologation) * Electric exterior mirrors * Power windows * Central locking system * and much more… Technical Data: Gross vehicle weight: 3,000 kg * Kerb weight: 1,976 kg * Trailer load: 2,200 kg Why are we the right choice? Attractive financing options through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your current vehicle at fair conditions * Transfer plates (5-day/ customs registration) usually available the same day * Pick-up service from airport or train station Fedpfxsyc A Uhs Aa Esfw All vehicles are professionally prepared and hygienically clean! Highlights: Disinfection of interior and ventilation system using ozone treatment. 2-stage exterior polish * Paint correction and smart repair if required All our vehicles have also undergone thorough servicing. Naturally, this includes new fluids, filters and other necessary work, so you do not have to worry about any of it. Optionally, we can present the vehicle at an independent inspection center or workshop of your choice. We are pleased to have sparked your interest and are at your disposal around the clock. If you have any questions, comments or specific requests, please do not hesitate to contact us! For more information and an insight into our business philosophy, visit Special Features: Audio system RCD 210 (radio/CD player with MP3 playback), Electric Package 1, Sliding window in the cargo/passenger compartment: 1st row left, Rear wing doors with windows, Interior release for tailgate / rear doors, Spare wheel with full-size tire, Seat package: 9-seater, 2-2-2-3 (2 individual seats, 2-seater bench, 2-seater bench, 3-seater bench), Seats in cargo/passenger compartment: 1st row, 2-seater bench, Seats in cargo/passenger compartment: 2nd row, 2-seater bench, Seats in cargo/passenger compartment: 3rd row, 3-seater bench, Passenger compartment prep II, Additional winter tires (customer information required), Permitted gross vehicle weight 3.00 t Further features: Driver's and passenger's airbag, Aspherical exterior mirror, left, Convex exterior mirror, right, Rubber flooring in cab, Brake assist system (HBA), Fixed window in cargo/passenger compartment: rear left, Fixed window in cargo/passenger compartment: rear right, Fixed window in cargo/passenger compartment: front right, Heated rear window, Pollen filter, Body/structure: Standard Kombi, Body variant: Standard roof, Child safety locks on sliding doors, Headlight leveling, 2.0 L - 62 kW TDI engine, Non-smoker package, 3,400 mm wheelbase, Low emissions according to Euro 5, H4 headlights, Sliding door passenger/cargo area right, Upholstery: fabric, Steel wheels 6.5x16, Half-height hardboard lining in cargo/passenger area, Heat-insulating glazing.

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 450 mm, controller manufacturer: FANUC, controller model: 31i-B5, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, tool weight: 8,000 g, number of axes: 5, This 5-axis CHIRON FZ18W was manufactured in 2019, featuring a FANUC 31i-B5 control system and continuous 5-axis control. It boasts a spindle speed of up to 12,000 rpm, a tool capacity of 70, and rapid traverse rates of 75 m/min. Ideal for complex machining tasks with its automatic pallet changer and dual rotary tables. If you are looking to get high-quality milling capabilities consider the CHIRON FZ18W machine we have for sale. Contact us for more information. • Number of axes: 5 (X, Y, Z + 2 rotary axes via pallet/rotary table) • Spindle: • AC spindle motor: 7.5 kW (100% duty), 22.0 kW (10% duty) • Max torque: 140 Nm • Taper: HSK-A63 (DIN 69893) • Drilling capacity: Ø 42 mm • Tapping capacity: M30 • Milling capacity: 500 cm³/min (steel E355) • Tool changer: • Type: Fully enclosed chain magazine • Capacity: 70 tools • Max tool Ø: 78 mm (160 mm with free adjacent positions) • Max tool length: 380 mm • Max magazine load: 240 kg • Tool change time: ~0.9 s • Chip-to-chip time: ~2.6 s • Feed rates & dynamics: • Rapid traverse (X/Y/Z): 75 m/min • Acceleration: 0.6 – 1.2 – 1.4 g • Drives: Direct digital drives with absolute measuring system • Machine functions/utilities: • Automatic washdown of work area and fixtures • Automatic centralized grease lubrication • Hydraulic unit: 200 bar • Compressed air treatment with filtration to 0.01 µm • Cooling unit for machine components • Measuring, monitoring, software: • FANUC 3D collision control • Tool monitoring and sister tool management • Electrical & interfaces: • Ethernet RJ45, USB, PCMCIA • Remote diagnostics: CHIRON remoteLine • Data monitoring & OEE: CHIRON dataLine • Compliance: CE Additional equipment (robots, automation, peripherals) • Automation/palletizing: • Automatic pallet changer IWV 0°/180° (change time ~3.5 s) • Rotary table ATU 200, 2 units • Positioning accuracy/repeatability: ±5″ • Max clamping torque: 1,200 Nm • Max load per side (APC): 250 kg • Max weight difference between pallets: 0 kg • Coolant and chip management: • Through-spindle coolant (predisposition) • High-pressure coolant system up to 30 bar Fodpfxsyaz Eme Aa Eefw • Coolant filtration: Drum filter TPF 350 S (50 µm) • Chip conveyor: Hinged belt • Coolant tank: 230 L • Pump: 250 L/min @ 1.4 bar • Probing/tool control: • Renishaw RLP40Q probe (predisposition) • Laser tool breakage control (Single F1000)