Used Trough Auger for sale (649)

Condition: good (used), functionality: fully functional, battery capacity: 375 Ah, remaining battery capacity: 74 %, battery voltage: 24 V, total length: 790 mm, total width: 210 mm, total height: 630 mm, overall weight: 310 kg, Forklift battery 24V 3PzS375 Battery 74% TESTED Year of manufacture: unknown Weight approx. 310kg Dimensions: 790mm x 210mm x 630mm Special trough STILL/Linde quick-change system! Battery has been serviced and tested by a specialist company. Capacity test (C5 discharge test) 280/375 Ah battery Kdodpfx Acoy N Ty Ajpju Remaining capacity: 74% With Aquamatik filling system (BFS) With pole bolts but WITHOUT final lead-out cable.

Condition: ready for operation (used), * Brand: Metso * Type: FS 283 , for wet screening. Kdedpfezd U Hksx Acpou * Surface: 6000 x 1600 mm - 3 decks. * Incl.: 37 kW E-motor and outlet trough. * On stock: 3 pieces.

Condition: excellent (used), functionality: fully functional, Schomaker STWC-600 | Dry Breader Manufacturer: Schomaker Type / Model: STWC-600 Serial Number: 280515 Mesh belt width: 600 mm Belt material: Stainless steel Overall dimensions: 2900 × 900 × 1930 mm Equipped with an integrated, upper hopper for breading material (e.g., breadcrumbs, flour, or fine-grained spices). The STWC-600 is a fully professional, industrial dry breader designed for the automatic and continuous coating of food products with dry breading. This machine is a key component of "convenience food" production lines, working directly with formers and liquid breaders (which apply batter or dough). It is an ideal solution for the production of nuggets, cutlets, fish sticks, poultry wings, and vegetable-based and molded snacks. The 600 mm working width of the mesh belt guarantees excellent throughput, allowing for smooth synchronization of the device with efficient frying or freezing tunnels. Kjdpfjy Ub S Rox Acpedu Key features and operating principle: - Full coating system (360°): The device evenly applies breading to all sides of the product. The bottom part of the product is coated by passing over the so-called "breading bed" on the belt, while the top and side sections receive a uniform flow of medium from the integrated curtain system. - Recycling and breading saving system: The machine has a built-in internal transport system (e.g., screw conveyor or vertical conveyor) that collects excess unused breading from the lower trough and transports it back to the upper hopper, operating in a closed loop. - System for removing excess breading: The equipment is fitted with an adjustable air blower or a vibration system, which effectively removes loose, excess amounts of breadcrumbs or flour from the product before it enters the fryer, preventing oil from burning and improving the appearance of the product.

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, controller model: WinMax, workpiece weight (max.): 681 kg, total height: 2,519 mm, total length: 1,800 mm, total width: 1,671 mm, table width: 406 mm, table length: 762 mm, table load: 681 kg, overall weight: 2,818 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 101 mm, distance table center to spindle nose: 610 mm, spindle motor power: 11 W, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 25 mm, tool diameter: 89 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, Used Hurco VM10i vertical machining center, ideal for companies seeking precision, reliability, and productivity with a reasonable investment. This machine is perfect for mechanical workshops, subcontractors, and manufacturers of components for automation, automotive, hydraulics, and general mechanical applications. It features a robust structure, high precision, and excellent performance in milling, drilling, and tapping operations. The machine is in good working condition and ready for immediate integration into production. Available for inspection and testing at our facility. Kdodpezcpu Iefx Acpsu The machine is complete with: * Auger-type chip conveyor with side discharge * High-pressure pump * Digital manuals * CE declaration of conformity

Condition: used, functionality: fully functional, overall weight: 210 kg, Year of construction: 2006, machine/vehicle number: 31006, Construction machinery technology: mounting plate for hydraulic breaker Kodpeyxgfdjfx Acpodu

Condition: used, Year of construction: 2021, Suitable for (model): Unimog, truck, UNIMOG. We are selling one used Schmidt Stratos S 30 - 24 VEP 490 spreader, manufactured in 2021. STRATOS S30 Schmidt silo spreader STRATOS S 30 (24), 3.0 m³ stainless steel container Auger conveyor ("S") Protective grid 40x40 mm, steel (for S/F/D25-30) Folding roof Profi, stainless steel (for 25-30) Container in orange RAL2011 (standard) Auger cover (for S17 - S30) Stainless steel ladder (standard for stainless steel spreader) Rear cover, stainless steel FS preparation (additional valve on the hydraulic block) Drive via vehicle hydraulics ("V") Connections at the front of the unit (for V) Hydraulic couplings, leak-proof ISO16028, P=Size 2(M) R=Size 3 Kdsdpfx Asyq Ar Ascpou Control system Evolution Professional "EP", incl. electric adjustment of the spreading pattern Premium spreading disc "490" (spreading width 2 - 10 m) Ball joint frame for Unimog 405.125 Support feet (4 pcs.), 3 t., crank drive in the center, incl. lateral supports Rotating beacon (1 piece) Warning tape red-white, at the top of the container Marking "Winter service" (German) Contour marking according to UN ECE R48 Splash guard 2,000 mm Minimum flow connection on the valve block, without pressure gauge Flow rate detection with load sensing pump (for V) Location: 93095 Hagelstadt

Condition: used, Pneumatic Vibratory Feeder, Explosion-Proof Vibrating Trough, Pneumatic Vibratory Conveyor, Used Machine Manufacturer: NetterVibration Type: Netter NTK Overall dimensions: Width: 950 mm Kdodpfezat Elex Acpsu Depth: 430 mm Height: 1340 mm Trough dimensions: Discharge opening size: 155 × 125 mm Width: 670 mm Depth: 420 mm Height: 250 mmPneumatic Vibratory Feeder, Explosion-Proof Vibrating Trough, Pneumatic Vibratory Conveyor, Used Machine Manufacturer: NetterVibration Type: Netter NTK Overall dimensions: Width: 950 mm Depth: 430 mm Height: 1340 mm Trough dimensions: Discharge opening size: 155 × 125 mm Width: 670 mm Depth: 420 mm Height: 250 mm

Condition: used, Year of construction: 2012, power: 110 kW (149.56 HP), Hargassner 110 kW – Biomass Boiler (Pellet / Wood Chip) – 2 Units Available, Cascade Operation Possible For sale is a Hargassner 110 kW fully automatic biomass boiler in a modern design (year of manufacture: 2012). ⚠️ 2 identical boilers available! ➡️ Ideal for cascade operation up to approx. 220 kW ➡️ High operational reliability and optimal performance modulation — Technical Data: • Year: 2012 • Output: 102–109 kW • Combustion output: up to 116.5 kW • Max. temperature: 95 °C • Max. pressure: 3 bar • Water volume: 190 liters • Weight: approx. 1010 kg — Key Features: • Fully automatic operation • Lambda sensor → automatic combustion control • Modulating output (demand-based adjustment) • Automatic cleaning and de-ashing • 3-pass boiler → high efficiency • Fireclay-lined combustion chamber → clean combustion • Automatic grate (self-cleaning) • Very low power consumption (~0.18 kW) • Modern, energy-efficient system — Feeding Technology / Equipment: • Incl. feed auger (standard equipment) • Currently equipped with an automatic pellet suction system (vacuum system/suction feed) ➡️ Very simple pellet operation: • Connection to pellet storage via flexible hose • System automatically draws pellets into the boiler • Fully automatic operation without manual feeding ➡️ Optional: Can also be used for wood chip operation (by connecting to a discharge system) — Condition: • Recently dismantled • Was fully operational until dismantling — Inspection: Viewings are possible by appointment at our 1,500 m² warehouse in Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used Heating Systems, Boilers, Heat Pumps & Accessories Direct from Stock We are a family business with around 20 years of experience in heating technology, boasting a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of approx. 50–60 units. Kjdoy A Ei Nopfx Acpjdu 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our inventory includes: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Feed augers • Discharge systems • Burners • Pumps • Extensive heating accessories ⚙️ Accessories and Components: Additionally, we have a wide range of accessories, including circulation pumps, plate heat exchangers and many other components – from small-scale applications to industrial-scale solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units that are not yet listed. 📅 Inspection: A viewing at our warehouse is possible by prior appointment. If you are interested, please contact us – we will help you find the right solution.

Condition: used, Year of construction: 1998, Technical details: x-travel: 630 mm y-travel: 600 mm z-travel: 650 mm control: MSC 502 (Fanuc 16) Spindle RPM: 12000 1/min spindle drive: 22 / 18,5 kW rapid travel x/y/z: 32 m/min Pallet dimension: 500x500 mm numbers of pallets: 2 table load: 0,5 t working diameter: max. 610 mm Number of tool station: 60 BT40 max. tool length: 360 mm max. tool weight: 12 kg tool changing time: 1,3 sec B-axis positioning (non continuous): 1 total power requirement: 50 kVA weight of the machine ca.: 14 t dimensions of the machine ca.: 3,3 x 5,8 x 3,2 m Accerories Chip conveyor spindle load monitor Typ C Coolant gun Chamfering and corner rounding Tool life management Interface for coolant through the spindle This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options: Ksdpfx Asy Er Tgocpjdu ATC 60 tool stations, High pressure coolant trough spindle interface, *

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Ksdpfszmyviox Acpedu Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Year of construction: 2023, condition: new, Galen Group is the construction equipment manufacturer. We started to produce two years ago and now producing the GAL-90 powerful knuckle boom crane with a capacity of 90 tons. Kdjdpfx Acjn Tm Uzjpju While using the LMI system and stability sensors Galen accomplished to produce safer Cranes Award-winning designed knuckle boom cranes are improved trough R&D team of experts and produced in European standards and exported to the world. We can produce from 16tons capacity to 120tons capacity mobile crane

Condition: excellent (used), Year of construction: 2003, operating hours: 27,900 h, functionality: fully functional, clamping force: 1 kN, screw diameter: 32 mm, Type: HL120 RS35/32 Year : 2003 Auger ø 32 mm Hours: 27.900 h Kdodpfx Acju E Unfepsu

Condition: used, Year of construction: 2006, operating hours: 22,000 h, functionality: fully functional, EQUIPMENT FOR TRANSPORT AND MANIPULATION OF RAW MATERIALS The equipment consists of:  Mercedes Actros container truck  Two containers with a volume of 10 to 20 m3 for sawdust  Liebherr bulk loader Equipment condition:  In good condition EQUIPMENT FOR THE PREPARATION OF RAW MATERIALS The equipment consists of:  Waste bin with movable floor - volume approx. 10 m3  Pneumatic transport systems with filter  Conveyor belts and augers  Sawdust dryer with biomass burner  Hammer mill for chopping wood chips with associated equipment  Control cabinets for each piece of equipment Capacity of the complete plant:  About 2 t/h of dried sawdust Equipment condition:  Completely overhauled BRIQUETTING PRESS WITH SAW AND PACKING UNIT Full capacity is 3,5T/h A complete briquetting line consisting of the following:  Briquetting press BP6000 CFN consisting of: Kdedpfx Asz I Tm Ujcpeu o Silos for raw materials o Dosing screw o Oil and press head cooling system o Original press head and cooling line for briquettes with a diameter of 90 mm for hardwood o Manual and automatic control system o Current condition: the press has been 100% serviced and all vital parts of the press have been changed so that it is like new ones o Large quantity of spare parts in stock including spare axle and eccentric  Saw for cutting briquettes BRIDGE o Current condition: the equipment has been fully serviced  Automatic packaging machine for briquettes ROSMAN o Current condition: the equipment has been completely serviced and a new control cabinet has been made

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Kodpfx Ajzf Nbxecpedu

Year of construction: 2011, condition: ready for operation (used), A Händle twin-shaft screen filter mixer with hydraulically adjustable screen, which was overhauled in 2020, is available. Gearbox: ZHP 5.32/1168848, oil type: CLP PAO 320, gearbox weight: approx. 1000kg, mixing trough width: 1000mm, trough and cylinder length: 1150mm+850mm, mixer shaft speed: 12U-30rpm, theoretical wet material throughput capacity: approx. 39t-99t, theoretical compact material volume throughput: 22m³-56m³/h. The gearbox, mixer shafts and screening device were overhauled in 2020. Including mixer screws and screens. Documentation available. On-site inspection is possible. Ksdpfx Acewrhwzjpsdu

Condition: used, maximum load weight: 21,830 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/2009, next inspection (TÜV): 08/2025, loading space length: 9,030 mm, loading space width: 2,450 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2008, Equipment: ABS, * Separate hydraulic unit (24V) * Radio system * Hydraulic tilting roof * Drinking trough system * Side shifters * 4th-level low-loader * 3rd-level gooseneck * Fan * Feed flaps * Storage boxes * 1st axle can be lifted * Front axle tire size: 245/75R17.5 * Rear axle tire size: 245/75R17.5 * Technical total weight: 34000 kg * Tare weight: 12710 kg * Overall length: 13600 mm * Next inspection due: 02.2026 * Vehicle number: 12047 Errors and prior sale excepted. Kdedoy T Uiajpfx Acpju Advertisements and various lettering have been digitally removed. We will gladly assist you with all formalities associated with purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Assistance with financing * Application for export license plates * Vehicle transport * Vehicle registration * Recovery and vehicle transport YOUR VTS TEAM

Condition: used, maximum load weight: 33,800 kg, overall weight: 34,000 kg, axle configuration: 2 axles, first registration: 10/2012, next inspection (TÜV): 09/2026, loading space volume: 95 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Separate hydraulic unit (24V) * Hydraulic lift roof * Hydraulic loading lift * 3rd-floor gooseneck * 3rd-floor low-bed * Electric livestock scale * Drinking trough system * Heater * Radio system for superstructure * Fan * Side shifters * Telematics system ----* VSE ETS2 forced steering (electro-hydraulic) Kdodpfoy Hn Rdox Acpeu * Radio remote control for steering * Additional lighting * Camera ----Loading height (1st/2nd/3rd floor)* Gooseneck: 1.90/1.36/0.90 m * Low-bed 01: 1.90/1.78/1.20 m * Low-bed 02: 1.90/1.55/1.02 m Total loading area: * 1/2/1st floor = 50.05 m² * 1/2/2nd floor = 55.00 m² * 2/2/2nd floor = 64.00 m² * 2/3/2nd floor = 79.90 m² * 2/3/3rd floor = 86.80 m² * 3/3/3rd floor = 94.50 m² ----* Tire dimension: 245/70R17.5 * Technical total weight: 34000 kg * Tare weight: 12200 kg * Overall length: 14200 mm * Next inspection due: 03.2026 ----Vehicle number/Vehicle: 12027----Errors and prior sale excepted.----Advertisements and various lettering have been digitally removed. -----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. We can also offer the following services for an additional charge:----Trade-in of your old vehicle, TÜV/main inspection, complete export processing, arranging financing, applying for export license plates, vehicle delivery, vehicle registration, recovery and vehicle transport. ----?YOUR VTS TEAM

Condition: good (used), Year of construction: 2000, MORI SEIKI SH-503/40 TWIN PALLET CNC HORIZONTAL MILLING MACHINE WITH MORI SEIKI MSX-502III CONTROL UKUK Pallet Dimension 500 x 500mm. Maximum Table Load 1,000kg. Axis Travel X'=630mm, 'Y'=600mm, 'Z'=650mm, 'B'=1° Increment. Rapid Traverse 'X,Y,Z'=32m/min. Spindle Taper BT40. Maximum Spindle Speed 12,000rpm (22kW Motor). 120 Position ATC. Maximum Tool Ø150mm (Without Adjacent Tools), Maximum Length 360mm, Maximum Tool Weight 12kg. S/No. 1212 (2000). DESCRIPTION With Renishaw OMP 600 Spindle Probe, Blum Laser Tool Setting/Breakage Unit, Dual Auger To FSE Chip Conveyor, Through Coolant Filtration System, Oil Chiller, Filtermist Mist Extraction Unit, Handwheel & Signal Tower. Overall Dimensions L4,500 x W2,725 x H3,267mm. Weight 14,900kg. Note: Tooling & Tombstones Not Included. Kdodpoxqt Tiofx Acpeu

Condition: ready for operation (used), Year of construction: 2021, This 3-axis Hurco VM 10i was manufactured in 2021, featuring advanced capabilities like MAX5 control with dual 19" LCD displays, Ethernet and USB interfaces, and a solid-state drive for enhanced performance. It includes high-pressure coolant systems through the spindle, integrated hydraulic tool clamping, and a chip auger for efficient chip management. Consider the opportunity to buy this Hurco VM 10i vertical machining centre. Contact us for more information about this machine. • Includes MAX5 control with detachable electronic handwheel • 2 × 19" LCD color displays (text + graphics) • Network interface • 2 software units for programming • Internal self-diagnostics • Windows platform • Integrated hydraulic tool clamping system • Cooling flood through spindle with ICS (20 bar) • High-pressure cooling flood system Kdsdpfx Ajx H A I Rscpju • Spindle cooler • Chip auger • Chip splash guard cabin • LED machine light in the work area • Indicator light for machine operating status • Trochoid milling cutter function for higher machining performance • Tool and workpiece measurement • Collision protection with islands • Synchronous thread cutting • ISNC extended NC mode

Condition: ready for operation (used), Equipment: documentation/manual, Lieberr - Lorenz S800 / Gear Hobbing Machine -Well-maintained machine with extensive accessories -1 pallet / Change gears -1 pallet / Hobbing cutters -1 pallet / Clamping arbors DOCUMENTATION -Max. workpiece length with counter support 600mm -Max. workpiece length with retracted counter support 800mm -Max. travel of the milling slide 360mm -Largest millable pitch with the largest workpiece 5 PI / Normally 8 PI -Taper for spindle - Milling spindle MK 5 -Milling arbors / 22 / 27 / 32 / 40 mm -Max. cutter diameter 186mm -Max. cutter length 170mm -Max. cutter feed 80mm -Cutter speeds 40 - 220 rpm -Feeds infinitely adjustable / Horizontal -Feeds infinitely adjustable / Vertical -Feeds infinitely adjustable / Tangential -Clamping table without water trough 550mm -Clamping table bore 100mm -Clamping arbor taper MK 4 Dimensions: L x W x H 3.6 x 1.8 x 1.9 meters / Weight: 5000 kg Kodpfxjzv Ed Ds Acpjdu Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1989, - USED - ROLL FORMING MACHINE Kedpszqwf Nofx Acpsdu STEPS: N. 20 WEIGHT: 25000 Kg OVERALL DIMENSIONS: 7300 x 2400 x 1500 mm NOTE: PROFILE: WIDTH FROM 85 mm TO 670 mm; LENGTH FROM 2000 TO 5000 mm; THICKNESS FROM 0,6 TO 1,5 mm IN AUTOMATIC; No 5 4-STEPS HEADS; FORMING LINE FOR CABLE TROUGHS AND CABLE TRAY COVERS PRODUCTION; EQUIPPED WITH LOADING/UNLOADING ROLLER CONVEYORS

Condition: used, functionality: not functional, total length: 5,150 mm, total width: 130 mm, total height: 1,800 mm, overall weight: 1,200 kg, Heudra auger pump with conveyor belt. This system can be used for the disposal of, for example, fruit waste. The substance is fed onto the conveyor belt, which then transports it to a hopper. From the hopper, the substance is pumped away by an auger pump. Ksdpjzuyzbsfx Acpsdu The machine is entirely made of stainless steel; the conveyor belt is made of plastic. Dimensions (w x l x h): 130 x 515 x 180 cm Dimensions of conveyor belt: 70 x 300 cm Dimensions of hopper: 80 x 60 x 90 cm deep The control panel for the motors is included, but the control system is missing.

Condition: refurbished (used), Product number 1225 Machine dimensions: 760 x 980 x 1320 mm (width x depth x height) Sieve diameter: 130 mm Weight: approx. 470 kg Power: 16 kW Power supply: 400 V 50Hz 5N Filling system: Auger Kdodpozvrglofx Acpju Protection rating: IP 69 Capacity: 12 tons/8h Housing made entirely of stainless steel. Gearbox and motor overhauled. Device after major servicing, ready for operation.

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: 01810, 7 Face grinding supports 2 Top chamfering tools 2 Bottom chamfering tools 1 Water groove milling support Kedpfxozy Eh Rj Acpedu 1 Milling support Infeed and outfeed roller conveyor Belt running direction: left to right Water trough

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4 was manufactured in 2017. It features an X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a maximum spindle speed of 8,100 RPM and a robust table size of 1321 mm x 495 mm, supporting a maximum weight of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4 vertical machining centre we have for sale. Contact us for further details. • Spindle taper: CT 40 • Max torque: 122.0 Nm @ 2000 rpm • Table dimensions: 1321 x 495 mm • Max weight on table: 794 kg • Tool changer: 20 positions (umbrella type) • Rapid feedrate (X/Y/Z): 25.4 m/min • Table to spindle nose (min/max): 107 / 742 mm • T-slots: 5 slots, 16 mm width, 80 mm pitch • Power-on time: 18673:41:20 • Cycle start time: 3974:33:16 • Feed cutting time: 2117:17:34 Kedpfx Ajy Sg H Uscpsdu • Included machine options/features: 15" color monitor, rigid tapping, USB port Additional equipment • Programmable coolant nozzle • Auger-type chip conveyor