Used Trumatic 600 L for sale (37,392)

Condition: used, functionality: fully functional, mileage: 55,000 km, power: 170.64 kW (232.01 HP), first registration: 12/1991, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 4x4, fuel: diesel, color: red, gearing type: mechanical, Year of construction: 1991, Equipment: all wheel drive, parking heater, From our immediately available used vehicle inventory, we offer you: Fire engine LF 16/12 4x4 all-wheel drive, 1,600 l water tank, on MAN 14.232 chassis General information: • Year of manufacture: 1991, first registration: 12/1991 • Mileage: approx. 55,000 km • Permissible total weight: 14,000 kg • RAL 3000 (fire red) Chassis: • MAN 14.232, 4x4 all-wheel drive, 232 HP • Diesel engine with manual gearbox and power steering • Towing hitch Cab: • Crew cab (1:8) in RAL 3000 (fire red) • Mountings for 2 self-contained breathing apparatus facing against the direction of travel • Mountings for 2 self-contained breathing apparatus facing the direction of travel • Auxiliary heater Bodywork: • Built by Ziegler • LF 16/12 superstructure according to DIN standard • Two spacious side equipment lockers per side • Fold-out steps for side equipment compartments • Mountings for standard equipment • Hose reel carriage fitment • Storage racks for extension and sliding ladders on the roof Firefighting pump/extinguishing agent tank: • Ziegler FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 1,600 l Nsdpfx Ahsxflnhe Ujlk • Foam agent tank 400 l Firefighting equipment: • Rigid rapid intervention line (top, G6) • Roof monitor • Built-in foam inductor Safety and lighting: • 2 blue revolving warning beacons • Siren system • Crew and locker compartment lighting • Surround lighting • Auxiliary spotlights • Rear view camera • Rear warning system • Light mast 2 x 1000 Watts (operated by generator) • Hygiene board available on request We would be pleased to make you a detailed offer and give you a full presentation of the vehicle at our premises in Berlin. All information provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, overall weight: 110 kg, Vacuum Lifter GLASS SYSTEM DS600 L Vacuum lifter for installation of large glass panes, shopfronts, and for glass transport. Thanks to its design, it allows for the installation of long, narrow panes as well as standard sizes. Specification: LIFTING CAPACITY – 450 kg CONTROL – radio remote control POWER SUPPLY – battery powered (up to 12 hours operation) BATTERY CHARGE INDICATOR – yes VERTICAL-HORIZONTAL ROTATION – yes AXIAL ROTATION – yes NUMBER OF SUCTION PADS – 4 NUMBER OF ARMS — HST GLASS LIFTING CAPABILITY – no Nlodjw Hq I Espfx Ah Uek GLASS SIZE – min. 0.3 x 1.5 m, max. 3 x 4.5 m NUMBER OF CIRCUITS – 2 ACTUATOR FOR ROTATION OPTION – yes MACHINE WEIGHT – 110 kg Lifting capacity can be increased to 650 kg and additional suction pads can be supplied at extra cost. Machine customization to individual requirements and purchase with a crane are available. Check our offer or contact us – we will surely find a solution tailored to your company’s needs!

Condition: used, Year of construction: 2012, operating hours: 5,626 h, Equipment: all wheel drive, New arrival!! Liebherr L 514 P (Parallel Lift Frame) Stereo Loader (articulated steering + rear axle steering – extremely maneuverable!!!) Last model year without particle filter and AdBlue!!! Chassis number VATZ1115AZB 031099 Operating hours according to meter: 5626 72 kW 98 HP, Total weight: 10,500 kg Unladen weight: 9,000 kg * Hydraulic control circuit for high-tip bucket, grapple bucket, clamshell bucket, snow plow * Automatic central lubrication system * 2 work lights on cab roof (front) * 2 work lights on cab roof (rear) * Comfort seat with suspension * Adjustable steering column * Radio pre-installation * Engine air intake with pre-separator TOP-AIR * Rotating beacon (blinker) at rear center cab * Reversing camera with separate monitor Nodpexlw Imofx Ah Uolk * Main electrical master switch Hydrostatic drive with 2 speeds Tires: Front axle: 17.5 R 25, 20% good Rear axle: 17.5 R 25, 40% good Width: 2,400 mm Various buckets for this machine in stock Additional equipment available at extra cost: Clamshell bucket 2.0 m³ from €3,250 High-tip bucket, 2.0–2.5 m³ from €3,950 High-volume bucket 3.0 m³ No. 59 – €2,950 Screening/mixing bucket 5-ton pallet fork from €2,190 Price with quick coupler and 1.6 m³ bucket: €43,900 net + VAT. Other equipment available on request! All prices are ex-stock, net price + 19% VAT for domestic sales or for export! We are happy to arrange transportation to your location. Sale only to commercial customers or for export. Sale as is, as seen. No warranty or guarantee. The listed mileage and operating hours are read off the odometer/hour meter; we do not guarantee their accuracy! Subject to prior sale. This vehicle description does not constitute a binding offer and the information provided shall not be regarded as guaranteed characteristics. The description and details serve solely as general identification of the vehicle and do not constitute a warranty in the legal sense. No claim to completeness is made. All details/descriptions and photos are non-binding and do not constitute guaranteed properties. Contract terms in order confirmation and invoice are binding. The seller assumes no liability/warranty. The advertisement may contain typographical or transmission errors. The seller has not inspected the machine. Features may require individual verification. We are also happy to consider your vehicle in part exchange. For further questions, please contact us. For our international customers, we prepare all customs and export documents for fast and trouble-free overseas transport.

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,600 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, Equipment: chip conveyor, Long-bed pendulum machining Control: 3-axis CNC path control, Siemens 840 D (E305-1) TECHNICAL DATA Working area X-axis 2600 mm Y-axis 520 mm Z-axis 630 mm Pendulum operation 2 x 860 mm Table clamping surface 3440 x 570 mm Automatic tool changer Number of tools 40 Tool holder (DIN 69871) SK 40 Tool change time 2.0 sec Max. drive power 18.5 kW Speed range up to 10,500 rpm EQUIPMENT/ACCESSORIES Njdpfx Ahjxwwc Ue Ujlk - Automatic tool changer ATC 40 - Long part machining/pendulum machining (center partition not included) - Splash guard enclosure with sliding doors, electrically secured, incl. machine light - Coolant unit with high-pressure pump and paper band filter Tank capacity 500 l, normal pump 200 l/min at 1.5 bar High-pressure pump 50 l/min at 20 bar, incl. double switch filter - Through-spindle coolant supply (IKZ) - Chip conveyor with ejection height 1050 mm - Rinsing gun - 1 NC rotary table with chuck - 1 hydraulic tailstock - 1 clamping bridge - Electronic handwheel - Mounting elements - Documentation

Condition: used, functionality: fully functional, Year of construction: 1991, machine/vehicle number: RS110/3, Technical data: 1x Zasche / Stahl ZHD 1600 pillar jib crane NL 1600 KG Load capacity at full outreach: 1600 KG / 1.6 t Height: approx. 3.45 m, lower edge of jib: approx. 3.2 m Outreach: approx. 3.5 m, hook height: approx. 2.85 m Total weight: approx. 1000 kg Equipped with SEW chain hoist 1600 KG Nljdpfx Aexq Tw Ueh Uek Connected to 400V 16A, slewing range 360° Test book available Crane is disassembled and immediately available Item location: 75053 Gondelsheim Only the crane system shown in the pictures is for sale Very good condition, see pictures Shipping via freight forwarder or pickup by appointment

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport - tilting table (discharge) Description of Line Components Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated for by tilting the suction frame. The suction frame has a rotating function to collect short formats in an upright position and to place them down on the long edge. Light crane Trolley crane with a lift system traveling on rails by hand, which are standing on steel supports. lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustic signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulkollan transport rollers. In vertical position transport rollers with Perbunan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Driven by a geared motor, A.C., frequency-controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Njdpfx Ahewii Hfe Uslk Transport rollers, which are individually driven by worm gear wheels are placed on a solid welded frame. The transport rollers are arranged in drag bearings. Tilting arms are in horizontal position. The integrated tilting table is made of several profile arms which can be tilted (electro-mechanical by crank mechanism) from the horizontal position by 84°. The tilting speed has its lowest speed at the beginning and at the end of the movement. The glass is tilted from vertical to the horizontal position. If no glass happens to be in the Pre-Heating oven the glass runs into the oven.

Year of construction: 2008, condition: ready for operation (used), Punching force: 220kN, working range combined operation X/Y: 2585mm/1650mm, working range punching operation: 3085mm/1740mm, working range laser operation X/Y: 3085mm/1650mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 230kg. Positioning speed: 109m/min, max. stroke rate: 900 strokes/min, max. marking rate: 2800 strokes/min, tool positions: 18, accuracy: +/-0.1mm. Machine dimensions X/Y/Z: approx. 8000mm/9000mm/2500mm, weight: approx. 22500kg. Documentation available. An on-site inspection is possible. Expected to be available from November 2025. Njdpfsxddagex Ah Uslk

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 44,973 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, number of slots in tool magazine: 21, AUTOMATION - SheetMaster - GripMaster - TrumaSort R4 ADDITIONAL EQUIPMENT - Laser TruFlow 2700 - MultiTool function - Thread forming function - Marking/fast beading function - MultiBend function - Rolling technology function - Repositioning cylinder - Bulge detection - Chip conveyor TECHNICAL DETAILS Punching working area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control: Siemens Sinumerik 840 D Laser Laser power: 140 - 2,700 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Workpiece weight: max. 200 kg Punching Punching force: 220 kN Active hold-down clamps: 4.5 - 20 kN Linear magazine: 21 tools Programmable slide: 500 x 500 mm Positioning speed X / Y / simultaneous: 90 / 60 / 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Signing stroke sequence: 2800 rpm Position deviation: ± 0.10 mm Position scatter: ± 0.03 mm MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 t Laser switch-on time: 29,826 h Cutting time: 6,054 h Machine switch-on time: 44,973 h Compressed air connection: 7 ± 1 bar Consumption of laser gas CO2 / N2 / He: 1 / 6 / 13 l/h EQUIPMENT Nodpfx Ahevxivmo Uelk - Stable, easily accessible C-frame - Drives with maintenance-free three-phase motors - Programmable hold-down device for repositioning - Sensor-monitored part slides for punching and laser station, ejection cylinder on laser slide - Laser unit: High-frequency excited CO2 laser, vibration-insulated, including cooling unit and laser control DIAS 3 - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Programmable cutting gas pressure setting - Laser cutting head: 5'' lens, quick-change device, distance control - Multi-beam light barriers, quick hydraulic shutdown, extraction and compact dust extractor, protective device against scattered radiation on the cutting head

Condition: used, Year of construction: 2004, Manufacturer: Pyrazol year of manufacture: 2004 operating temperature +10- +50 C total diameter: 1500mm Nlsdpfeuf Rxdsx Ah Usk height: 21000mm connection: 4x 200mm flanged 2x 3.4 inch + cleaning opening weight: empty 500 kg

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Operating hours NC: 41804 Resonator hours: 14466 Beam ON hours: 2054 Y-Axis: 1300 mm Additional equipment: various tools Recently installed new parts: Conversion to laser control TASC5 (01/2025) Control panel with display (01/2025) Nledpfx Ajwkd Efsh Uok Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Year of construction: 1978, condition: used, machine/vehicle number: NBGMAN 2, Technical data: 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment Nlsdpfxjr Igtko Ah Uok

Condition: refurbished (used), Year of construction: 1973, functionality: fully functional, rotational speed (min.): 4,800 rpm, Separator WESTFALIA type SB60-06-076 for beer, fruit juices, wine, vegetable juices, tea, coffee, for citrus and tropical fruits for pectin capacity: 300-13.000l per hour with 4,800 rpm Dimensions and weight: Height: 2500 mm Length: 2000 mm Width: 1800 mm Weight: 2350 kg Technical Data: Manufacturer: Westfalia Type: SB60-06-076 Year of construction: 1973 Serial number: 1668 021 Ø dl. 568 mm Drum speed: 4800 rpm Permissible density of the centrifuged material: Heavy liquid: 1.0 kg/ dm3 Solids: 1.45 kg/ dm Njdpfx Ahstqf Dbe Uelk Test books, tools, drawings available!

Year of construction: 2001, condition: ready for operation (used), Max. cutting force: 220kN, laser power: 3200W, nitrogen connection: 30bar, oxygen connection: 20bar, connected load: 76kVA, operating hours at the beginning of 2025: 67,766h, with Trumpf TLF 3200 laser and RIEDEL L 15/21 TR3/19.00 cooler, refrigerant: R134a, filling weight: 11.5kg, high pressure: 20.2bar. Tools additionally available. An on-site inspection is possible. Nlodpfx Aow Uk A Rsh Uek

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, workpiece weight (max.): 230 kg, TECHNICAL DETAILS Cutting force: 220 kN Working area: 3,085 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Control Control: Bosch Trumagraph CC 220 MACHINE DETAILS Machine weight: 13,800 kg Space required: approx. 7,900 x 6,300 x 2,200 mm Electrical specifications Mains connection: 400 V, 50 Hz Connection power: 19 kVA Nedpfxjwcqfpe Ah Uslk Supply voltage: 400 V Control voltage: 24 V Required fuse: 3 x 35 A Compressed air Compressed air connection: 6 bar

Condition: good (used), - Coated steel tanks - Vertical, on concrete base Dimensions : - Depth : 3100 mm - Width : 1400 mm - Height: 1800 mm Equipment : - Rectangular manhole 320 x 420 mm, offset to the side - Partial discharge, flap valve, DN 40, Friedrich no. 2 Nlsdpfx Aji Ew D Noh Ujk - Residual discharge, flap valve, DN 40, Friedrich no. 2 - Level indicator - Aeration and deaeration, DN 40, Friedrich no. 2

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 11,676 h, machine/vehicle number: KM-1148, laser power: 3,200 W, punching force: 22 t, punching diameter: 76 mm, sheet thickness (max.): 8 mm, workpiece weight (max.): 230 kg, workpiece length (max.): 1,650 mm, workpiece width (max.): 2,585 mm, No reserve price - guaranteed sale at the highest bid! Machine including SheetMaster and TrumaGrip TECHNICAL DETAILS Punching force: 22 tons Control: Siemens Sinumerik 840 D Punching working area: 3,085 x 1,740 mm Combined working area: 2,585 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Max. punching diameter: 76.2 mm Rapid traverse X / Y / simultaneous: 90 / 60 / 108 m/min Tool holder: Hydraulic mono tool holder, 360° rotation Holder: Programmable for repositioning processes Chip handling: Chip bucket Laser unit: High-frequency excited CO₂ laser TruFlow Laser working area: 3,085 x 1,650 mm Laser power: 2,700 Watt Laser cutting heads: 5" lens, 7.5" lens, cutting head quick-change device Distance control: DIAS Cutting technology: HI-LAS high-pressure cutting Functions: AutoLas, ContourLas Laser control: TASC 3 MACHINE DETAILS Width: 2,400 mm Length: 8,700 mm Height: 7,800 mm Total weight: 22,500 kg Switch-on time: 59,2344 h Laser cutting time: 11,676 h EQUIPMENT - Parts chute 500 x 500 mm, sensor-monitored - 2 good parts boxes - AutoLas - Ejection cylinder on laser chute - Automatic tool length compensation - Tool spray lubrication - Punch slug extraction - 2nd lubricant container - Multi-beam Light barriers - Quick shutdown hydraulics - Extraction and compact dust extractor - MultiTool function - Thread forming function - Vibration-damped installation Nljdpjv Am Twefx Ah Uek - Brush tables - Chip conveyor with tilting container - Standard equipment SheetMaster 1606 - Loading station with spreading magnets - TRUMAGRIP scrap skeleton disposal unit with scissor lift table - Sheet thickness gauge for double sheet control - Suction plate module - Parts conveyor belt A deposit of EUR 7,500 is required for transport security.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, operating hours: 76,500 h, machine/vehicle number: 080430, laser power: 3,200 W, punching force: 22 t, punching diameter: 64 mm, type of input current: three-phase, working range: 1,250 mm, Equipment: cooling unit, documentation/manual, safety light barrier, machine in very good condition, fully functional and reliable. currently dismantled and prepared for immediate removal. I can provide videos of operation. help with assembly. Nljdpfxowwumys Ah Uek

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 500 h, TruMatic 6000 fiber large format (K06) + SheetMaster + GripMaster + TruStore 3030 Double tower (46 Storage pallet) Full automated high-end punch laser combination machine with with all available options! Operating hours: 500 h (!) Nlodpfx Ahjw Iz N Io Uok Year of prod.: 06/2022 Highlited options: Punching quality package : • MultiShear function • Deburring and roller technology function • Adaptive stroke calibration • StripLine Forming package: • Tapping function including forming tap breakage control • Marking/quick beading function • MultiBend function • Height-adjustable clamps Descending die MultiTool function Engraving function Die spray lubrication with level monitoring Chip conveyor with tipping container Loading/Unloading: SheetMaster 3000 x 1500 mm (AK04) Loading and unloading parallel to production Peeling unit including positioning aid for large sized sheets Additional positioning aid for small-sized sheets Additional positioning aids for medium-sized sheets First additional suction package Second additional suction package Unloading monitoring of laser cut parts Integrated tool changer, 40 stations GripMaster 3000 x 1500 mm Three scrap skeleton grippers, one of which with sensor system Parts conveyor belt for punch and laser side TruStore 3030 double tower storage system (46 pallet) • Storage equipment • Sheet size 3048 x 1524 mm • 3 t load capacity per pallet • Storage safety device • Column covering • Pallet lift (lifting chain, cable carrier) • 19" touchscreen operating panel • Storage interface for connecting two automation solutions • Instruction, documentation • Electrical cabinet lighting • CE marking and EC Machinery Directive

Year of construction: 1995, condition: ready for operation (used), A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible. Nlodpfx Ahswftdge Ujk

Condition: good (used), turning diameter over cross slide: 570 mm, turning length: 6,000 mm, turning diameter: 840 mm, Manufacturer: L&W Type: FB 33240 Control: Siemens 840D Solution Line Year of manufacture: 2021 3-jaw chuck SCHUNK ROTA-S Plus 500-102 3 x Fixed steady rest Duplomatic VDI turret Siemens 840 DSL This type of lathe is commonly used in industries such as: - Oil & gas (pipe threading, tool joint machining) - Steel industry (roll turning) - Power generation (turbine shaft turning) - Heavy machinery manufacturing Nlsdpfswtdz Eex Ah Ujk Specifications Metric US Standard Turning length: 6000 mm Swing over bed: 840 mm Swing over cross slide: 570 mm Spindle bore: 105 mm Spindle power: 33 kW Bed width: 450 mm Quill diameter: 220 mm Spindle taper: 5 MT Spindle speed: 1200 rpm Feedrate X-axis: 5000 mm/min Feedrate Z-axis: 7000 mm/min Workpiece weight: 2500 kg Dimensions (approximate) Length: 9500 mm Width: 2300 mm Height: 2300 mm Weight: 8600 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all critical details.

Condition: excellent (used), Stainless steel tank 6000 l double jacket Volume 6000 l Double jacket Very good condition, directly from production!!! Nodpfjk D T Rtjx Ah Uolk

Condition: used, Standing stainless steel tank: Nozzles and connections: In the bottom: 1 x DN 50 outlet nozzle, extended to the front 1 x DN 25 threaded nozzle In the top: 2 x DN 25 threaded nozzles On the shell: 1 x oval manway with swing bolt 1 x nameplate 1 x threaded nozzle Nominal capacity: approx. 6,000 l Internal diameter: 1,800 mm Cylindrical height: approx. 1,750 mm Total height: approx. 2,885 mm with 680 mm ground clearance Perm. operating overpressure: 3 bar Perm. operating temperature: 20 °C Material: Nlsdpexxkkhofx Ah Uek Stainless steel V2A (1.4301) Bottom thickness: 4 mm Top thickness: 4 mm Shell thickness: 3 mm Tank standing on three heavy-duty legs Otherwise as per images

Year of construction: 2008, condition: good (used), Make: MAEGERLE Type: MGC-L 560 65 45 Year: 2008 CNC gear rack grinding machine Automatic grinding head B-Axis Grinding head ca 20 gr swivel ARO - KKS coolant tank 8000 L ( size 4400 x 1900 x 2200) Pendel opperation ( double table) Dresser automatic Table dresser Specifications Metric US Standard X - Travel 5500 mm Y - Travel 650 mm Z - Travel 750 mm Table Length 5500 mm Table Width 750 mm Feed rate X-Axis 20000 mm/min. Feed rate Z-Axis 20000 mm/min. Grinding stone dimensions 600 x 300 mm Power 115 kW Speeds 8000 Rpm Coolant system Yes Feed rate Y-Axis 20000 mm/min. Dimensions (Estimate) Length 10700 mm Width 4700 mm Nlodpfx Ahjkvntwo Usk Height 3800 mm Weight 42000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: Nsdpfx Aexk T Efoh Ujlk • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: excellent (used), Stainless steel tank 6000 l double jacket Volume 6000 l Double jacket With agitator Very good condition, directly from production!!! Nljdpfxek D T R Eo Ah Uek