Used Trumpf Trubend 5170 for sale (412)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 20,118 h, laser power: 6,000,000 W, number of axes: 3, This 3-axis TRUMPF TruLaser 5030 was manufactured in 2012. It features a powerful 6,000 W laser and is equipped with a HANDTE MF-L 2000 extraction system. The machine has been completely freshly serviced and has a total of 20,118 laser hours. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 CO2 laser cutting machine we have for sale. Contact us for further details. • Connected load: 400 V / 50 Hz / 12 kVA Kwodpfx Aboyrfbcevsw • Main fuse: 3x160 A • Safety: Light barrier system • Laser hours: 20,118 h • Condition/Service: Completely freshly serviced Additional equipment • HANDTE MF-L 2000 extraction system

Condition: ready for operation (used), Year of construction: 2015, controller manufacturer: SIEMENS, controller model: 840D, This TRUMPF TruLaser Cell 7040 was manufactured in 2015. It features a large working range with dimensions of 4000x2000 mm and a Z-axis height of 750 mm. Equipped with a powerful TruFlow 4000 Watt CO2 laser, it excels in both thin and thick material cutting. Additional features include CNC automatic scanning, height detection, and a Siemens 840D control system. Consider the opportunity to buy this TRUMPF TruLaser Cell 7040 CO2 laser cutting machine. Contact us for more information. Additional equipment • HERDING Fume extraction in working area: 2000 Nm3/h • Cooling unit • Automatic sliding door "CE" • Automatic two-level redundant working range protection "CE" Machine Benefits Technical Machine Benefits • Cnc automatic workpiece scanning • Cnc automatic height detection • Table for laser cutting: 4000x2000 mm • Laser source: truflow 4000 watt (co2) Kwedpfx Aboyaizcovew • Dynamic optics for thin materials focus distance: 155 mm • Dynamic optics for thick materials focus distance: 240 mm • Optics calibration device Extra Information Working range X: 4000 mm Working range Y: 2000 mm Working range Z: 750 mm 3D cutting head B = 135°, C = n x 360° Partition wall for 2 side operation CE certification 3D Programming Module TruTops Cell Automatic Laser status indicator light

Condition: ready for operation (used), Year of construction: 2010, operating hours: 27,928 h, This 3-axis TRUMPF TruLaser 5030 + LiftMaster was manufactured in 2010. It features a watt CO2 resonator and handles a maximum sheet size of 3000x1500mm. The system includes a LiftMaster aIf you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 machine we have for sale. Contact us for more information. • Max. sheet size: 3000x1500 mm Kodpfx Abjx E Ed Esvoww • LiftMaster Included • Resonator: 7000watt C02

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,097 h, This 3-axis TRUMPF TruLaser 3030 was manufactured in 2007. It features a powerful 4,000 W CO₂ laser and a working format of 3,000 × 1,500 mm, making it suitable for various cutting applications. With a connected load of 88 kVA, this machine is designed for efficiency and reliability. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details. • Supply Voltage: 400 V / 50 Hz • Connected Load: 88 kVA Kwedoynlk Nepfx Abvew • Control Voltage: 24 V • Required Fuse Protection: 3 × 160 A • Compressed Air Connection: 7–10 bar • Nitrogen Connection (N₂): 30 bar • Oxygen Connection (O₂): 20 bar • Laser Power: 4000 W • Laser Type: CO₂ • Working Format: 3000 × 1500 mm

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, laser power: 3,000,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, overall weight: 12,700 kg, total width: 3,000 mm, total height: 2,400 mm, product length (max.): 9,400 mm, number of axes: 3, This 3s TRUMPF TruLaser 3030 Fiber cutting machine was manufactured in 2014. It features a powerful 3,000 W TruDisk 3001 solid-state fiber laser, with a maximum cutting capacity for mild steel up to 20 mm. The machine offers impressive positioning speeds and a spacious working area, making it suitable for various applications. Consider the opportunity to buy this TRUMPF TruLaser 3030 Fiber cutting machine. Contact us for further details. • Positioning speeds: • Max. speed X: 100 m/min • Max. speed Y: 100 m/min • Max. simultaneous X/Y: 140 m/min • Cutting capacity: • Max. mild steel thickness: 20 mm • Max. stainless steel thickness: 15 mm • Max. aluminum thickness: 15 mm • Max. copper thickness: 6 mm • Max. sheet weight: 900 kg • Machine data: • Connected load: 37 kVA • Compressed air consumption: 35 Nm³/h • Color: White / Blue • Integrated features: • Integrated electrical cabinets with internal lighting • Work area lighting • Positioning laser diode • Spray device • Automatic nozzle cleaning • Laser and technology functions: • FocusLine • NitroLine • PlasmaLine • PierceLine Kwjdpfxsyka Dvj Abvow • ContourLine • FastLine • FlyLine • AdjustLine • MicroWeld Additional equipment • Conveyor belt for small parts / slag

Condition: ready for operation (used), Year of construction: 2012, punching force: 18 t, total height: 2,252 mm, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, controller manufacturer: BOSCH, controller model: MTX CMP70, product length (max.): 6,500 mm, This TRUMPF TruPunch 3000 S11 was manufactured in 2012. It features a Bosch MTX CMP70 control system, with X/Y-axis travels of 2500 / 1250 mm, and can handle sheet weights up to 160 kg. The machine includes a linear tool magazine with 18 stations and offers functions like MultiTool, MultiBend, and thread forming. Consider the opportunity to buy this TRUMPF TruPunch 3000 S11 CNC punching machine. Contact us for more information about this machine. Ksdpfsx D Dklsx Abveww • Maximum sheet weight: 160 kg • Performance: • Punching strokes (E = 1 mm): 1000 strokes/min • Marking strokes: 2500 strokes/min • MultiTool tool-change time: 0.3 s • Power consumption: • Standby with auto-shutdown: 0.3 kW (average) • During production: 5.6 kW (average) • Equipment & features: • MultiTool function • MultiBend function • Thread forming function with tool breakage monitoring • Surface marking/embossing function • Deburring and roller technology • Tool magazine: Linear, 18 stations • Documentation: TruPunch 3000 documentation

Condition: ready for operation (used), Year of construction: 1998, overall weight: 8,600 kg, This 6-axis TRUMPF TrumaBend V85S press brake was manufactured in 1998. It features a bending length of 2,550 mm, an 850 kN bending force, and a 6-axis back gauge. The Delem 65 CNC control enhances precision, while the electro-hydraulic twin cylinder drive ensures robust performance. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85S machine we have for sale. Contact us for more information about this machine. Additional equipment • Extended Installation Height and Stroke: Additional 150 mm each • 2nd Foot Switch Machine Benefits Technical Machine Benefits • Drive type: electro-hydraulic twin cylinder with independent y1/y2 movement Kjdpfxsx D N Sue Abvjww • Power requirements: 11 kw / 415 v / 50 hz • Design: down-stroking with dual cylinder electro-hydraulic ram drive via proportional valves • Inclination of beam (y1/y2): +10 mm • Bending force: 850 kn // gap between columns: 2260 mm // throat depth: 410 mm // stroke length: 215 mm // open height: 385 mm • Bed width: 120 mm • Ram measurement: incremental with deflection compensation • Tool holders: self-centering top tool holder, hardened bottom tool holder • Hydraulic tool clamping: hydraulic clamping for both top and bottom tools • Safety features: safety screens, light barriers, single/double break modes // front support brackets: two quick-adjustable brackets Extra Information Back Gauge: CNC-controlled ‘X’ and ‘R’ axis back gauge with safe 2-finger adjustment X-axis Back Gauge Travel: 600 mm Maximum X Distance: 860 mm R-axis Vertical Travel: 250 mm Back Gauge Travel Speed: 500 mm/sec R-axis Speed: 300 mm/sec Z1/Z2 Axis: CNC-controlled, asymmetric finger adjustment Working Speeds: Approach Speed: 200 mm/sec Operation Speed: 1–10 mm/sec Return Speed: 135 mm/sec Technical Specification Bending Length 2550 mm

Condition: ready for operation (used), Year of construction: 2022, operating hours: 7,500 h, Metal 3D printer manufactured in 2022. This TRUMPF TruPrint 1000 multilaser features two 200W fiber lasers, providing multilaser productivity with 7,500 operating hours per laser. It is designed for high-precision dental and medical components, utilizing Bego Mediloy S-Co (Cobalt-Chrome alloy). Consider the opportunity to buy this TRUMPF TruPrint 1000 multilaser metal 3D printer. Contact us for further details. Ksdpfxoyifire Abvjww • Lasers: 2 x 200 W fiber lasers (multilaser) • Laser operating hours: 7,500 h per laser • Build volume: 100 mm diameter x 100 mm height • Material used: primarily BEGO Mediloy S-Co (Cobalt-Chrome) • Applications: high-precision dental and medical components • Condition: well-maintained; operated in a controlled laboratory environment • Handover: machine handed over at the laboratory gate

Condition: ready for operation (used), Year of construction: 1991, punching force: 15 t, overall weight: 4,300 kg, product length (max.): 3,800 mm, CNC punching machine manufactured in 1991. This TRUMPF TRUMATIC 120R features a punching force of 15 tons and a maximum punching diameter of 38 mm. It offers a working area of 1000 x 2000 mm with repositioning and includes a complete set of tools. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 120R machine we have for sale. Contact us for further details regarding this machine. • Maximum sheet thickness: 4 mm • Maximum punching diameter: 38 mm • Working area without repositioning: 1000 x 1000 mm • Working area with one repositioning: 1000 x 2000 mm • X/Y axis speed: not specified • Rotation speed: 360 degrees per second (full rotation) • Maximum stroke rate: 340 strokes per minute • Control system: TRUMAGRAPH CC 200 • Automatic tool change: 9 tool stations Kjdpfsymz Rcsx Abvoww • Power requirement: 15 kVA / 50 Hz • Documentation: Complete documentation included, together with machine history Additional equipment • Large set of tools • Two additional tables to extend the working area

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,724 h, total height: 2,252 mm, overall weight: 9,300 kg, product length (max.): 5,000 mm, This TRUMPF TRUPUNCH 3000 (S11) was manufactured in 2012. It features a Bosch Rexroth MTX CMP70 control, a maximum sheet format of 2,500 × 1,250 mm, and can handle sheet thicknesses up to 6.4 mm. The punching force reaches 180 kN, with a maximum workpiece weight of 160 kg. It includes a linear magazine with 20 stations and supports various roller tools. Consider the opportunity to buy this TRUMPF TRUPUNCH 3000 (S11) CNC punching machine. Contact us for more information. • X-axis speed: 90 m/min Ksdpfsx Urcgjx Abvjww • Y-axis speed: 60 m/min • Simultaneous X/Y speed: 108 m/min • C-axis speed: 330 rpm • Max. punching force: 180 kN • Max. pressure foot force: 20 kN • Max. workpiece weight: 160 kg • Max. sheet thickness: 6.4 mm • Max. sheet format: 2500 × 1250 mm (with repositioning) • Electrical connected load: 18 kVA • Fuse protection: 35 A • Pneumatic connection: 7–14 bar • Compressed air consumption: 8–10 Nm³/h • Tapping • Filling level inspection • Multibend • Multitool • Roller tools including cutting, pinching, folding, beading, knurling, deburring • Monitoring filling level • Hydraulic unit • Punch lubrication • Dimensions Machine Depth 6500 mm

Condition: ready for operation (used), Year of construction: 1991, punching force: 15 t, overall weight: 4,300 kg, number of axes: 3, This 3-axis TRUMPF Trumatic 120R was manufactured in 1991. It features a maximum punching force of 150 kN and a machine weight of 4,300 kg. With an estimated operational lifespan of 40,000–60,000 hours, this machine is designed for durability. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 120R CNC punching machine we have for sale. Contact us for further details. • Supply voltage: 380 V • Frequency: 50 Hz • Connected load: 9 kVA • Control voltage: 24 V DC • Required fuse protection: 3 × 35 A Kodpfx Aeyn Ddbebvsww • Compressed air requirement: 6 bar • Estimated operating hours: 40,000–60,000 (based on condition and guides)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 40,507 h, punching force: 22 t, travel distance X-axis: 2,500 mm, overall weight: 11,050 kg, controller manufacturer: BOSCH, number of axes: 2, CNC punching machine manufactured in 1995. This TRUMPF TRUMATIC 500 features a maximum punching force of 220 kN and a working area of 2,500 mm. It is multitool capable and comes with 2 tools in a cassette for commissioning. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 500 machine we have for sale. Contact us for further details. • Programming system: Trumagraph • Supply voltage: 400 V / 50 Hz • Connected load: 17 kVA • Control voltage: 24 V • Required fuse protection: 3 × 35 A • Compressed air requirement: 6 bar • Multitool capable • Documentation available • Condition: Partially overhauled • Operating hours: 40,507 h Additional equipment • 2 tools with cassette (for commissioning) Kjdpsyn Dkzefx Abvjww

Condition: ready for operation (used), Year of construction: 1999, operating hours: 51,135 h, punching force: 22 t, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, overall weight: 13,800 kg, controller manufacturer: BOSCH, number of axes: 2, CNC punching machine manufactured in 1999. This TRUMPF TRUMATIC 500 features a maximum punching force of 220 kN and a working area of 3,000 mm by 1,600 mm. It is equipped with a Bosch control system and is multitool capable. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 500 machine we have for sale. Contact us for further details. Kjdpsyn Dd Isfx Abvjww • Programming system: Trumagraph • Supply voltage: 400 V / 50 Hz • Connected load: 19 kVA • Control voltage: 24 V • Required fuse protection: 3 × 35 A • Compressed air requirement: 6 bar • Multitool capable • Partially overhauled • Operating hours (mechanical counter): 51,135 h Additional equipment • 2 tools with cassette (for commissioning) • Documentation available

Condition: ready for operation (used), Year of construction: 1996, overall weight: 18,000 kg, This 3-axis TRUMPF Trumatic 600L was manufactured in 1996. It features a maximum punching force of 220 kN and a laser power of 1,500 W, making it suitable for various applications. With a machine weight of 18,000 kg, it offers robust performance. If you are looking to get high-quality punching and laser capabilities, consider the TRUMPF Trumatic 600L punch-laser combination we have for sale. Contact us for further details. • Maximum punching force: 220 kN • Laser power: 1500 W • Laser type: TLF 1500 T • Laser nominal power: 54 kVA • Supply voltage: 400 V • Frequency: 50 / 60 Hz • Nominal current: 78 A • Required fuse protection: 3 × 80 A • Control voltage: 24 V DC Kwjdpfx Absynk Exsvsw • Compressed air requirement: 7 – 11 bar • Power supply unit type: IS 11 / 13560 • Power supply output power: 11 kW • Power supply frequency: 13560 kHz • Laser system in operation for approx. 30000–40000 hours

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 6,500 mm, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Process/software features: NoLine, PowerLine, ContourLine, Laser power control, Programmable cutting pressure, Program repeat, Automatic blow-off, Work interruption lighting, Hole-punching function (laser) • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting head: Laser cutting head with 155 mm lens • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Capacitor power 1600 N/cm², Safety with macro stops Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 216 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • LoadMaster Tube 6 m with belt support, 2 grippers • Options for LoadMaster Tube 6 m: Kwsdpfxsx D I H Do Abvjw • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance • Services: • Installation, commissioning, training

Condition: used, Year of construction: 2008, Technical details: Number of filters: 5 St. filter: 576/556 x 74 x 1050 mm total pressure: 200 daPa Kwedpfxoyt I Axe Abvow volume capacity: 1500 m³/h filter surface area: 25 m2 Voltage: 460 V motor capacity: 3,3 kW dimensions L x W x H: 1,05 x 1,28 x 2,0 m Dry separator with fan is sold as is. Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *

Condition: good (used), functionality: fully functional, Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit Kwedjytpimjpfx Abvew - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line

Condition: good (used), functionality: fully functional, Year of construction: 2003, laser type: CO₂ laser, laser power: 2,700 W, X working area max.: 6500 mm Laser power: 2700 watts Control: SINUMERIK 840D Standard equipment TRUMPF loading unit: - Tube feeder for round, square, and rectangular tubes via buffer section with X-stop for tube lengths min. 3 m and max. 6 m - Semi-finished product length measurement - Transfer unit to the machine - Tube magazine with tube separation, alignment, and transfer to tube feeder, max. bundle weight 4000 kg - Good parts removal up to max. 3,000 mm with chip conveyor - Additional tube supports - Tube handling unit: Kwsdpfx Abjytfyzsvsw Rotating and feed station: Rotating clamping unit with pneumatically actuated clamping jaws for tube lengths up to 6000 mm and tube diameters of d = 20 - 150 mm, 2 clamping ranges: d = 20 - 85 mm and d = 85 - 150 mm - Carriage unit with linear guidance - Feed station with motor drive, including connection for extraction - Tube support: Between tube support and traverse chuck, five automatically retractable support elements with form shells are provided - Traverse chuck: With a passage of d = 150 mm - The tubes are positioned via the clamping jaws centrally in the Y and Z axes relative to the rotational axis for the cutting process - 2 sets of clamping jaws for round, square, and rectangular tubes (simple design), clamping range 20 - 85 mm, 85 - 150 mm - Good part removal (unloading cabin for round and rectangular tubes) - Sorting options: 2 finished parts (front and rear), 1 flat - Scrap conveyor; programmable sorting; max. scrap length 300 mm (collection container, scrap belt) - Finished part length up to 3000 mm can be automatically unloaded (front and rear) Safety equipment: - Compact extraction unit Filter system designed for the separation of airborne particles produced during laser cutting of metals - Light barrier: Loading area secured by light barriers - Protective cabin: In the area of the cutting head, a Macrolon sheet metal combination is installed for laser radiation protection - Chip conveyor: Conveyor belt for discharging cut remnants - Operating manual

Condition: good (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, installation height: 615 mm, pressing force: 130 t, Bending length [mm] 3230 Kedpfeytfktex Abvsww Pressing force [ton] 130 Control system TRUMPF TASC 6000 Basic equipment: - Sturdy machine frame as all-steel welded construction - Pressure beam with high bending strength - Electro-hydraulic top drive via proportional valves - Modern block hydraulics - CNC backgauge with rack-and-pinion drive for X and R axes, safe repositioning of the backgauge fingers from the front - Upper tool clamping system "New Standard Clamping II", manual - Lower tool holder for EV dies, hydraulic clamping, programmable positioning (2 positions) - Safety device, rear roller safety cover - Control cabinet air conditioning - Network capable - Manual crowning, centrally adjustable + Increased installation height / stroke +230mm + 6-axis backgauge system + Hydraulic and hardened upper tool clamping + CNC crowning + BendGuard + 2 support consoles + Rear workspace lighting + Front workspace lighting

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 16,566 h, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 4,000 W, CNC Laser Cutting System TruLaser Cell 7040 FKL (L31) 4000 Watt Max. working area (X x Y x Z) in mm: 4000 x 1500 x 750 Control: Siemens 840D PowerLine Laser power: 4000 Watt Operating hours: 16,566 h Laser beam on: 14,202 h Laser Machine TruLaser Cell 7040, Y1500 (L31) - X = 4000 mm, Y = 1500 mm, Z = 750 mm, B = 750 mm, B = +/- 135°, C = n * 360° - 30m fiber optic cable - Automatic optical recognition - Magnetic coupling - FocusLine - Teach panel with teach software - Network connectivity Machine data acquisition TruDisk 4001 - Power = 4000 W - Beam quality = 4 mm·mrad - incl. laser power control Number of optical outputs Number of core switches Water-air cooler - For TruDisk 4001 Workpiece processing WeldLine Comfort - CutLine Professional - Prepared for laser cutting and laser welding - 2in1 fiber incl. core switch - Technology tables for cutting - ControlLine Motorized welding optics MDE nozzle f = 200 - Adjustable focus position: +30 mm / -70 mm TruTops Cell Basic Configurable control interface, control cabinet Safety equipment Extraction piping device Mobile room extraction unit Compact deduster with 4000 Nm³/h - Incl. spark pre-separator and self-cleaning filter mats CO₂ extinguishing system for 4000 Nm³/h Standard protective enclosure Automatic front sliding door - Incl. 2 control panels Status indicator light Movable hanging control pendant + TeachLine (special feature) - Optical sensor system with light section and incident light measurement allows complete 3D scanning of a measuring point - Coaxial camera integration - Incl. holder and wiring - Adaptation of TeachLine sensor system to MSO welding optics Kwjdoytfgbopfx Abvew + Pneumatic clamping of rotary axis and counter bearing + Extension of machine body - Surcharge for special machine body and extension 240 mm to the left + Large rotary axis & counter bearing on machine body - Rotary axis and counter bearing supported by floor rail - Max. load capacity 2,000 kg - Max. torque 5,600 Nm - Counter bearing without lift (not even pneumatic) - Rotary feedthrough on counter bearing 8x pneumatic/12x electric - Interface on rotary axis and counter bearing each with support bar with 2x M12 threads and D16 round bolts - Manual clamping + Media feed on machine body + Valve terminal on machine body + Measuring head probe - Incl. holder with yoke plate and wiring - Incl. calibration sphere - Interface for probe

Condition: good (used), Year of construction: 2003, Trumpf Trumatic L3020 Co2 Laser Fully working condition - removed from working factory Working Range X axis - 3000mm Y axis - 1500mm Z axis - 115mm Overshoot range X axis - -16- +88 Y axis - 19 - +61 Z axis - - 2 - +16 Max Travel range X axis - 3104mm Y axis 1580mm Z axis - 117m Control - Trumpf CNC Control based on siemens sinumerik 840D Kwedpfx Abjt H Iv Rovsw Electrical Connections with TLF 3200 - 73 kVa Fuses (at 400v) - 125A Speed - Max. positioning speed, Parallel to axis - 60m/min Simultaneous - 85m/min Accuracy - smallest programmable increment. Positioning accuracy - +0.1mm Repeatability - +0.03mm Max laser power in cw mode with TLF3200 - 3200W Max material thickness - 20mm

Condition: excellent (used), Year of construction: 2019, The system consists of two identical laser welding units. The system was previously used to manufacture Li-ion batteries (E-Smart). In this process, cell connectors for series connection in battery modules were welded. The cycle time for battery modules in this production was 3-4 minutes. Basic data: Year of manufacture: 2019 Weight: 6021 kg Kwjdpfxsv Iq Tls Abvew Nominal current: 20 A Connected load: 12 kVA Disc laser: Trumpf 12-12-30-A32/11 with focusing optics (PFO) Laser measurement and calibration: PRIMES FocusParameterMonitor (FPM) Control cabinet cooling: RITTAL SK 3185830 1x laser source supplying both systems: Trumpf TruDisk 5001, Laser power: 5 kW Wavelength: 1030 nm Beam quality: < 100 µm

Condition: used, Year of construction: 2009, sheet width 3050 mm plate thickness 6 mm rear stop 10-1000 mm cutting angle 0,5 - 2,5 ° down holder 20 Stk no. of strokes 14 - 23 Hub/min work height max. 900 mm oil volume 140 l total power requirement 11 kW dimensions of the machine ca. 4000 x 2150 x 1900 mm weight 7800 kg Equipment: - ELGO control unit type P50 - Automatic cutting angle adjustment - Automatic cutting gap adjustment - electric back gauge - Pneumatic sheet holding device - Light barrier behind the machine - 4 support arms - front finger guard - foot switch - operating instructions Special equipment: - Return to transmitter (sheet metal output to the operator) - Scrap switch Kwjdpfxjyk Dhxj Abvjw - Angle stop 0-180

Condition: excellent (used), Year of construction: 2011, TruLaser 5040 Twin Pack! Technical Specifications: Machine: 2D laser machine in tandem configuration CNC control: SIEMENS 840D Laser type: CO2 Working area: 4000 x 2000 x 115 mm Laser power: 6 kW Cutting capacity steel: 25 mm Cutting capacity stainless steel: 20 mm Cutting capacity aluminium: 12 mm Kwsdpfx Abeytbfmovow Max. workpiece weight: 1250 kg Automatic pallet changer CE marking Electrical equipment for three-phase current: 400 V / 50 Hz Dimensions (L x W x H): approx. 12,000 x 5,300 x 2,600 mm Weight: approx. 15 t Additional Features: No need to change cutting heads – one cutting head for all sheet thicknesses Laser power up to 7 kW, sheet thickness up to 30 mm TFT colour display Longitudinal conveyor belt Spray device PierceLine FocusLine NitroLine PlasmaLine Laser: CO2 laser TruFlow 5000 with optimized standby mode Maintenance-free turbo radial blower High-frequency excitation Built-in gas mixer Laser control TASC 3 Laser power regulation Laser logbook function Cutting Head: Lens cutting head with 250 mm lens Universal quick-change device (UTI) with bus interface LensLine with condition monitoring ControlLine: Height sensing and external edge detection for sheet material Note: Both machines can also be operated individually Control System: Control: SINUMERIK 840D Automatic shutdown ContourLine FastLine FlyLine Microweld Teleservice via Internet Data Transmission: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust extraction unit Programming: Workshop programming Additional Equipment: Laser power: 1 x TruFlow 6000 laser with optimized standby mode Extended Machine Equipment: 2x nozzle changers 2x BrightLine 2x cleaning brushes Both machines suitable for ambient temperatures up to 43°C The seller accepts no liability for typographical or data transmission errors. The machine's condition—optical, technical, and wear—corresponds to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1992, pressure 125 t chamfer lenght 3000 mm distance between columns . mm Control CNC type DA 65 R stroke 200 mm safety distance 136 mm rapid traverse - down 100 mm/sec rapid traverse - up 92 mm/sec working feed 1-10 mm/sec weight of the machine ca. 13 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Kwjdpfx Abeyqvc Ievew We look forward to your visit. Your Markus Hirsch Team