Used Trumpf Trulaser 7040 for sale (396)

Year of construction: 2005, condition: ready for operation (used), Working length: 3050mm, max. material thickness: 16mm, cutting angle range: 0.5°-2.5°, cutting gap adjustment range: 0.05mm-1.2mm, stroke rate: 16/min, back gauge travel: 1000mm, oil quantity: 300l. Machine dimensions X/Y/Z: approx. 4200mm/4250mm/2050mm, weight: approx. 14000kg. Documentation available. On-site inspection is possible. Cgjdpfox U Dw Nex Ah Hsn

Condition: ready for operation (used), Trumpf 12-12-30-A32/09 disc laser S/N 1804667-00097 + power cable, used, minor signs of use, 100% functional, scope of delivery as per photos Cgedpfjxaib Ijx Ah Hon

Condition: ready for operation (used), Trumpf 1488573 control SW V 6.2 / HW Index C1 SN:00569, used, normal signs of use, 100% functional, scope of delivery as per photos Cgedpfoxaib Usx Ah Hon

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 27,500 h, machine/vehicle number: S0711C0001, laser hours: 2,300 h, laser power: 1,000 W, laser wavelength: 515 nm, working range: 100 mm, Technical Specification Base Machine: TRUMPF TruPrint1000: SN: S0711C001, Year of manufacture 2019, Installed December 2019, Build chamber: Build cylinder diameter 100 mm, effective build area 97 mm, build height 100 mm Software version: H.M.I. Version 02.22.04 Operating hours: approx. 27,500 h* (of which 2,290 h production time) *as of September 2023 Technical Specification Laser Unit: TruDisk 1020: SN L5210M0058, Power: Single laser, output power of 1000 W at the workpiece, green wavelength: 515 nm Operating hours: approx. 11,500 h* Additional Information: In September 2023, the system was inspected and deinstalled by TRUMPF Service. Up to this point, the machine produced components of consistently high quality in our production (material used: copper alloy). Along with the system, you will receive the operating manual and the service report from the last maintenance in digital form. The last maintenance contract with the manufacturer was valid until May 2023 inclusive. Cjdpfx Aovptawjh Hogn For further information or inquiries, please contact us by phone or email.

Condition: used, Year of construction: 2001, Technical details: tube diameter: 74 mm wall strength: 5 mm tube diameter min.: 10 mm tube diameter max.: 74 mm round material: Stahl max: 40 mm Cjdpeu Ibvhofx Ah Hjgn control: Trumpf-Rohrtechnik IsoBend 2.0 bending radius max.: max: 300 / min: 65 mm bending angle max.: max: 195 / min: 0,1 ° bending speed: (°/s): 90 / (°/s²): 190 °/s tube pipe draw up length: 3000 mm work pressure of hydraulic: Betriebsdruck max: 300 bar total power requirement: 43 kVA weight of the machine ca.: 8,5 t dimension machine xH: 6,5 x 1,6 x 1,6 m dimension control panel: 0,8 x 0,6 x 1,4 m It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrous metals. Due to the cross slide of the bending head, the following advantages can be listed: -free programmable X and Y axes -level change cross slide: tical travel = 300mm (vert. position freely programmable) and max. horizontal movement 350mm -Bending forms of different sizes within a stack of bending forms can be approached as required. The bending direction is to the right. Control software Trumpf-Rohrtechnik IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Slide rail (speed max. 362mm/sec. and acceleration max. 1100 mm/sec.) i.D. *

Condition: good (used), Year of construction: 1997, machine/vehicle number: 1704, Offer 25509 Technical Data: - Workpiece clamping diameter up to 150 mm - Maximum clamping height with punch grinding device 130 mm - Grinding wheel diameter: 125 mm - Grinding wheel width: 26 mm - Cutting speed: 20 m/s - Workpiece rotational speed: 40 rpm - Infeed rate: 0.1 mm/min Cgjdpfx Asx Tp Uqjh Hen - Grinding spindle speeds: 2800 - 3600 rpm - Regrinding allowance per cycle: 0 - 0.5 mm - Drive 400 V / 1.1 kW - Coolant system - Space requirement approx.: W 600 x H 1800 x D 600 mm - Weight approx.: 150 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, sheet thickness (max.): 20 mm, input voltage: 400 V, type of input current: AC, Input voltage: 400V AC Frequency: 50Hz Connected load: 88kVA Control voltage: 24V DC Required fuse protection: 3x160A Laser power: 4,000W Cgodpfx Aoycwwdoh Hjn Compressed air connection: 7-10bar Nitrogen connection N2: 30bar Oxygen connection O2: 20bar Max. component size: 4,000x2,000x20mm Additional equipment: FEZER Maschinenfabrig GmbH – vacuum lifter V03004 (year: 03/99) STOPA Anlagenbau GmbH & CoKG – loading storage system – 084997 (load capacity: 3,000kg, year: 2008, sheet format: 2x4m, storage capacity: 30t, storage height: 5.36m, storage positions: 10) Overhead crane Loading and unloading stations

Condition: ready for operation (used), Year of construction: 1998, operating hours: 34,327 h, This 5-axis TRUMPF TrumaBend V130 press brake was manufactured in 1998. It features a 3-meter bending length and a 130-ton capacity, with a stroke of 215mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V130 machine we have for sale. Contact us for more information about this machine. Cjdpfex D Rl Nex Ah Hjgn Application Types Bending

Condition: ready for operation (used), TRUMPF 150 MQ VIS focusing optics SN:1277242-00769 + SN:1277243-00865, used, normal signs of use, 100% functional, scope of delivery as per photos. Cjdpfsx Eu Ugjx Ah Hjgn

Condition: ready for operation (used), Trumpf test module for direct current, used, in good condition, 100% functional, scope of delivery as shown in the photos. Cgedpfsx Evaqjx Ah Hjn

Condition: ready for operation (used), Trumpf 1255448 Industrial PC / Industrie PC SW V4.2 HW Index A3 SN: 2918, used, in good condition, 100% fully functional, delivery as shown in photos Csdpfxsx Eu T No Ah Hjgn

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Cgsdsx Eu Uyspfx Ah Hen

Condition: ready for operation (used), Trumpf / Hüttinger 1456168 control box Flow 36-48kW SN: 200128104 - 13.56MHz E, used, in good condition, 100% functional, scope of delivery as per photos Cgsdpfx Ahex Eu T As Hon

Condition: ready for operation (used), Trumpf 19-01-11-11 Laser Module for Trumpf Laser HL1003D 11 with 11 and 11, used, in good condition, 100% functional, delivery contents as per photos. Codpfjx Eu Utsx Ah Hjgn

Condition: ready for operation (used), Trumpf 150 MQ VIS focusing optic 22-43-69-00, used, in good condition, 100% functional, scope of delivery as per photos. Cgodpex Eu Umefx Ah Hsn

Condition: ready for operation (used), Trumpf Kontron CP671 TASC-MFB / 31.193-1010.1/B02 board SN: 152734123, used, in good condition, 100% functional, scope of delivery as per photos. Cgjdpfx Aex Evadsh Hen

Condition: used, functionality: fully functional, Year of construction: 2000, laser source manufacturer: Trumpf, laser source model: TLF 3000 turbo, laser power: 3,000 W, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, compressed air connection: 6 bar, Trumpf Maschinen Grüsch AG, laser cutting machine, TRUMATIC LC3030 Cgjdpfoyazrtex Ah Hon Model: LC3030 Series: Trumatic Year of manufacture: 2000 General information: Input voltage: 400V AC Frequency: 50Hz Connected load: 73kVA Control voltage: 24V DC Required protection: 3x125A Laser power: 3,000W Compressed air connection: 6 bar Nitrogen connection (N2): 30 bar Oxygen connection (O2): 20 bar Max. component size: 3,000 x 1,500 x 20 mm Accessories: Liftmaster Loading and unloading stations

Condition: excellent (used), functionality: fully functional, operating hours: 58,000 h, laser power: 5,000 W, TRUMPF Trumatic L 3050 - 5 kw TECHNICAL DATA: Make TRUMPF Type Trumatic L 3050 - 5 kw Year of manufacture 2005 Working area 3,000 x 1500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. Sheet thickness Mild steel 25 mm Max. Sheet thickness stainless steel 20 mm Max. Sheet thickness aluminum 12 mm Operating hours approx. 58,000 h STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - Laser unit: TLF 5000 CO2 laser, high-frequency excited, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Gantry drive in combination with linear direct drives Codpjrgaw Hjfx Ah Hegn - Laser power control - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for the production of small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change cutting head device - Automatic sheet outer edge detection - Capacitive height control (DIAS) - Process Control System (PCS) - Position laser diode - Automatic focus position adjustment AutoLas Plus - Automatic switch-off - Work area lighting - SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated with nitrogen ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin - Network connection: BNC/RJ-45 network connection - Electrical equipment for three-phase current 400 V / 50 Hz - Paintwork: textured paint white RAL 9002 / gentian blue RAL 5010 EXTENDED EQUIPMENT: - Additional laser cutting head with 9-inch lens - NEW transmitter tubes on delivery

Condition: good (used), functionality: fully functional, Year of construction: 2003, Do you have a problem with the resonator on your TRUMPF laser cutting machine with 5 kW output? Then you’ve come to the right place! TruFlow 5000 / 5 kW resonator for TRUMPF laser cutting machines (L 3050 / L 4050 / L 6050 / TruLaser 5030 / 5040 / 5060) Power measurement during machine dismantling: 5,462 W (end of October 2025) (The machine still delivered 4,930 watts at the cutting head. The resonator is in very good condition in terms of output.) Leak test: 0.02 hPa If you would like to replace your resonator or if you have issues with your turbine, feel free to contact us. Csdpfx Aoxzivbjh Hjgn All parts are available at short notice.

Condition: used, functionality: fully functional, Year of construction: 2005, We have various models of chiller units for TRUMPF laser cutting machines in stock! Cgjdpfxjwww Dns Ah Hsn Having issues with your chiller unit? Contact us! Chiller units for all common CO2 lasers in stock, whether 3.2 kW / 4 kW / 5 kW or 6 kW. All other spare parts are also available!

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Csdpfouthz Tjx Ah Hsgn Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: ready for operation (used), Year of construction: 2007, operating hours: 40,709 h, controller manufacturer: TRUMPF, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, This 3-axis TRUMPF 3050 with liftmaster was manufactured in 2007, featuring a 6 kW laser, capable of cutting up to 20 mm, 15 mm in stainless steel, and 10 mm in aluminum. If you are looking to get high-quality cutting capabilities consider the TRUMPF 3050 machine we have for sale. Contact us for more information about this machine. Cgedpfx Aox Imh Rsh Hon • Mild Steel: 20 mm • Stainless Steel (SS): 15 mm • Aluminum (Alu): 10 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, operating hours: 39,500 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TRUMPF Trumatic L 3030 - 4 kw - Year 2001 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2001 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC one 39,500 h (10.08.2024) Machine regularly serviced by TRUMPF! STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - DIAS 3 height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 Csdpfx Ahjulqrlj Hegn EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors

Condition: good (used), functionality: fully functional, Year of construction: 1999, Hydraulic Press Brake Make: TRUMPF Model: TrumaBend V170 Year: 1999 Technical Data Manufacturer: TRUMPF Model: TrumaBend V170 Year of manufacture: 1999 Operating hours: 45,074 h (read-off) Press force: 170 t Usable length: 4000 mm Stroke: 215 mm Dimensions: L 4.6 x W 2.70 (without bending aids 2.20 m) x H 2.70 m (transport height 2.5 m) Codpox E Tpiefx Ah Hegn Weight: approx. 16.5 t Equipment • Delem DA 2D graphic CNC controller • Controlled axes: Y1, Y2, X, R, Z1, Z2 • Pneumatic die shifting • Hydraulic tool clamping top and bottom (Wila/Trumpf system) • CNC-controlled crowning • 2 movable bending aids • Prepared for ACB angle measurement • Upper tool, OW210/S 28°/R1, H 140mm, L = 4000mm, segmented • Lower tool, EV002W8 30°/R1, H 100mm, L = 4000mm, segmented All details without guarantee. A demonstration can be arranged at any time in our showroom.

Condition: ready for operation (used), Trumpf 19-01-11-11 Laser Module for Trumpf Laser HL1003D 11 with 11 and 11, used, in good condition, 100% functional, delivery contents as per photos. Cedpfx Aex Dxqyeh Hogn