Used Tube Benders for sale (2,909)

Condition: used, Brush deburring machine, tube deburring machine ERINI type 250 Year of construction approx. 1995 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2,2 / 2,8 kW Mains connection 380 Volt, 50 Hz - Material support - New deburring brush - Suction connection Ø 100 mm Casdpfxspu R Ngs Aflsa Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition

Condition: good (used), Baltographe, Baltograph Csded Sacpspfx Afleaa -Dimensions: 715/270/H410 mm -Weight: 78.5 kg

Year of construction: 2001, condition: refurbished (used), VAN DAM 760 CAN/TUBE PRINTER, The machine has been fully refurbished in 2001. You can find the specifications below Machine Type: Can/tube printer Brand: van Dam Model: 760 Year: 1985 - Fully refurbished in 2001 Colours: 6 colours Maximum Output/hour: 36000 cans or tubes/hour Cajdpfx Ajh Ha Iheflea Condition: In good running condition If you have any questions about the machine or it's specifications you can always contact us.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 20037E2006, total width: 700 mm, total length: 700 mm, total height: 1,540 mm, type of input current: three-phase, filling weight (max.): 250 g, filling weight (min.): 5 g, compressed air connection: 6 bar, overall weight: 500 kg, year of last overhaul: 2025, Used Axomatic AXO 700 tube closing machine suitable for filling and closing aluminium tubes. Method: This machine automatically fills the tubes, closes the aluminium tubes through 4 folding stations, puts a code in the seal and automatically ejects the tubes. The tubes are fed and oriented manually. This machine is set up in our showroom where we are happy to demonstrate the machine. Contact us for an appointment. Technical details: - Min/Max diameter aluminium tubes: 13 – 42 mm. - Tube length from 60 to 250 mm. - The tube holder with tube is lifted 55 mm over the filling pipe during filling. - Min/Max dosage: 5 – 250 ml. - The dosage quantity can be set outside the machine and can be read on a counter. - Capacity: max. 1,200 tubes/hour (mechanical speed). The actual achievable capacity is partly dependent on the operator, the tube quality and the viscosity of the product to be filled. - Electric drive by means of an electric motor of 0.37 kW, 380 Volt, 50 Hertz. - All product contact parts are made of stainless steel 316, suitable for pharmaceutical and cosmetic products. - Rotating table, adjustable in height, with readout of the set heights. - No tube/no filling device. - Coding unit for the tubes - Automatic ejection device for the tubes. - 7-station table. Caedewnrrbepfx Afloa - Standard hopper with lid 55 liter capacity. - Machine frame and plating are made of stainless steel and is equipped with an anti-drip lock on the base, so that no product can enter the drive section. - Stepless speed control from the dashboard. - Security doors and casing made of stainless steel frame with plexiglass and door security. - Direct machine drive without chain. - Electric control box housed in the frame of the machine.

Condition: excellent (used), Year of construction: 2017, operating hours: 8,800 h, laser power: 2,000 W, ONLY approx. 8,700 hours of operation - available immediately Used fiber tube laser cutting machine with automatic feed and discharge Manufacturer: DURMA Model: TC HD-60170 Year of manufacture: 2017 (commissioned in June 2019) Control: Siemens Sinumerik 840 D SL Operating hours: ONLY approx. 8,700 hours Possible cutting variants of the profile: round, square, rectangular TECHNICAL DATA: Max. tube diameter: 170 mm Max. profile dimensions in a square: 120 x 120 mm Max. profile dimensions in a rectangle: 150 x 100 mm Min. tube diameter: 20 mm Max. material length: 6,500 mm Min. material length for automatic loading: 3,000 mm Material length of the last cut: 185 mm Cajdpfx Afjvylnzelea Unloading length: 6,000 mm Max. material weight: 37.5 kg/m Max. total workpiece weight: 210 kg Max. bundle weight: 3,000 kg X axis: 90 m/min. Y axis: 50 m/min. Z axis: 45 m/min. A axis: 1200 °/s. Max. cutting thickness: - Structural steel: 8 mm - Stainless steel: 4 mm - Aluminum: 6 mm - Copper: 2 mm - Brass: 4 mm Laser power: 2,000 watts Laser source: IPG Fiber Space requirement: 16,000 x 7,400 mm Machine weight: 20,000 kg EQUIPMENT: - Precitec cutting head (Light Cutter) - Vanterm compact filter system - Automatic weld seam detection - Automatic real-time measuring system for centering chucks AUTOMATION: - Automatic loading system (6,500 mm) - Unloading unit (6,000 mm) - Conveyor belt for unloading including small parts conveyor to the rear SAFETY: - Light barriers Detailed information and the machine layout can be found under Documents for download. Subject to prior sale. Sale excluding any guarantees and within the framework of our general terms and conditions. All statements without guarantee.

Condition: used, functionality: fully functional, Year of construction: 2006, degree of automation: semi-automatic, pipe diameter (max.): 30 mm, Well-functioning tube bending machine with double bending blocks. fully adjustable single bending blocks present Codpjwtgydofx Aflsaa

Condition: used, Fiber laser, fiber laser cutting machine with flatbed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer DURMA Type HD-F III 3015 III BH-IPG 2kW Serial no. 822817712 Year of construction 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area 3000 x 1500 mm Pipe cutting device up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power requirement: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50,100,200,300 µm - Max. power consumption 42 kW Caedpfx Aekdnv Tjflea - Machine power consumption 20 kW - Filter power consumption 4 kW - Cooler power consumption 10+1 kW - Resonator power consumption 7 kW Mild steel Sheet thickness max. 12 mm - Stainless steel Sheet thickness max. 6 mm - Aluminum Sheet thickness max. 6 mm - Copper Sheet thickness max. 3 mm - Brass Sheet thickness max. 6 mm Working range X-axis 3060 mm Working range Y-axis 1530 mm Working range Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator opposite - Water recooling unit for laser source and cutting head opposite - Under-table extraction and extraction filter system opposite - with 2-fold shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flatbed - Lynettes for Rorlaser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Condition: used, Pipe heater, pipe burner, pipe construction burner -Max. Diameter: 250 mm Casdpfx Afeb A Ix Solea -Burner for steel pipeline construction -Propane -Transport box -Dimensions: 600/1400/H330 mm -Weight: 90 kg

Condition: good (used), Year of construction: 2022, operating hours: 6,099 h, functionality: fully functional, machine/vehicle number: 6500014216, cutting range round steel at 90°: 240 mm, cutting range round steel at 45°: 240 mm, cutting range angle steel at 90° (X-axis): 180 mm, cutting range angle steel at 90° (Y-axis): 180 mm, cutting range angle steel at 45° (X-axis): 180 mm, cutting range angle steel at 45° (Y-axis): 180 mm, type of input current: three-phase, total length: 14,000 mm, cutting range square steel at 90°: 180 mm, cutting range square steel at 45°: 180 mm, feed length Y-axis: 7,500 mm, product height (max.): 12 mm, Tube laser Bodor T230-650CE 4K laser power: 4kW for tubes and profiles 7500mm length × 20-240mm diameter round 7500mm length × 20mm-180mm square automatic loading 3000-6200 Codpfx Aovvlbtsfljaa Laser head 2½D Selling due to purchase of 3D You can always come and see this machine running.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 24 h, Make: DURMA Type: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 24 h Max. pipe diameter: 170 mm Min. pipe diameter: 20 mm (12 optional) Max. Square profile dimensions: 120x120 mm Max. Dimensions of rectangular profiles: 150x100 mm Max. Profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. Profile weight: 37.5 kg/m Max. Material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeat accuracy: +/- 0.05 mm Max. Loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H,C,U,L *Installation area L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on equipment variant Standard equipment Sinumerik 840D control system Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for the output of analog values (power-speed-pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 Watt (incl. cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. Caedsdx Nfwjpfx Afloa We will be happy to send you further information on request.

Condition: used, functionality: fully functional, Motor: 22 kW Fan diameter: 700 mm Length: 2500 mm Cajdpjri R Dujfx Aflsa

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 3,000 W, Description BAISON G24C: (3 kW) PROFESSIONAL TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND AUTOMATIC UNLOADING SYSTEM This machine is also for profile, tub and different shape. Tube size range: Round tube: φ10-φ240mm Square tube: □10*10-□220*220mm Channel Steel: 22#（need nesting software and specialized fixtures） Angle Iron: 10#（need nesting software and specialized fixtures） I-beam:22#（need nesting software and specialized fixtures） H-beam:22#（need nesting software and specialized fixtures） Max.Tube Cutting Length 6.500 mm Effective cutting diameter for round pipes Ø10 mm – Ø240 mm Effective cutting size for square pipes □10 mm – □220 mm Max. Single Tube Weight 300 kg X/Y/Z axis travel 350 / 6,500 / 500 mm Ultra-short Tail Material ≥100 mm Positioning accuracy ±0.03 mm/m Repeatability accuracy ±0.03 mm Maximum travel speed Y axis 100 m/min Universal maximum rotation speed 140 r/min Maximum acceleration 1.0G Maximum pipe feed length 6,500 mm Total electrical power of the machine 24.8kw/59A Machine size 10.151 x 3.362 x 2.400 mm Weight of the machine 4.596 kg (Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 3 kW Laser head with automatic focus – RAYTOOLS Controller system – FSCUT 3000DE-G Automatic self-centering pneumatic chucks Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Servo motors – BOCHU Reducer – TECHMECH Guide rail – SHAC Proportional valve – SMC / FESTO Welded and heat-treated machine bed – BAISON Wireless remote controller High precision X/Y transmission mode with rack and rails – K.H Computer with Windows 11 interface, Internet & WIFI Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Semi-automatic loading system with chain Automatic unloading system: 3.000 mm with following motor Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Safety relay Complete CE standard Assisting gases (16 bars air compressor can be also used for cutting): - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar) Cedpfx Afovcbrhslsaa Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - our service team know from beginning how to respect service, installation and training. - for this machine the installation and training is 1 week. Not included in machine price. - we can offer cost also depend on end-user place and country. - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Official Seller CNC Top Ten bv Coevorden Netherlands

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Caedpjhrkrwsfx Aflea Machine. No. Year of construction 2005 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support - new deburring brush Space requirement L x W x H 550 x 450 x 440 mm Weight 65 kg good condition

Condition: used, Sputter target, tube, pipe -Tube dimensions: Outside: Ø 152 mm Inside: Ø 125 mm Total length: 3249 mm -Number: 2x pipes available -Price: Complete -Incl. Transport box -Dimensions box: 3600/570/H585 mm -Weight: 306 kg Cedpfx Afob Ilw Uolsaa

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. Cjdpfxjpugwis Afloaa The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: as good as new (ex-display), Year of construction: 2024, Make: DURMA Type: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 24 h Max. pipe diameter: 170 mm Min. pipe diameter: 20 mm (12 optional) Max. Square profile dimensions: 120x120 mm Max. Dimensions of rectangular profiles: 150x100 mm Max. Profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. Profile weight: 37.5 kg/m Max. Material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeat accuracy: +/- 0.05 mm Max. Loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H,C,U,L *Installation area L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on equipment variant Casdpfx Afed Tt Atelsa Standard equipment Sinumerik 840D control system Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for the output of analog values (power-speed-pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 Watt (incl. cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: like new (used), Demo unit - has only been used for demostration. Works 100% and can be seen and testet here before purchase. Casdpfx Afog I Dtvolea

Year of construction: 2023, condition: new, big Tube and profile laser cutting machine. Cedpfomxl S Asx Afleaa up to diameter H profile till 12 meter tube or profile lenght laser head depend on material thickness. offer by request. installation and training include.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 11,851 h, controller model: Siemens Sinumerik 840 D, laser power: 3,600 W, sheet thickness steel (max.): 8 mm, working length: 6,500 mm, working width: 250 mm, Laser cutting machine with comprehensive equipment! The machine was last serviced by TRUMPF on 21.03.2025. Machine will remain powered on until 12.09. TECHNICAL DETAILS Working area: 6,500 x 250 mm Laser power: 3,600 W Accuracy: 0.1 mm Material Thicknesses Max. mild steel thickness: 8 mm Max. stainless steel thickness: 6 mm Max. aluminium thickness: 5 mm Performance Max. speed: 100/60/60 m/min Caodpfsw Nqxhjx Aflsa Control: Siemens Sinumerik 840 D MACHINE DETAILS Laser hours: 11,851 h Operating hours: 47,778 h Dimensions & Weight Machine dimensions (L x W x H): 17,300 x 8,600 x 3,000 mm Weight: 19,000 kg EQUIPMENT Circumscribed circle diameter 200 mm 3 m unloading station with brush table Front unloading station NitroLine FocusLine SprintLine Laser power control Automatic shutdown function Work area lighting CO2 Laser TruFlow 3600 Laser logbook function Chiller unit Cutting head with 155 mm lens Teleservice RJ network connection and USB port USB interface CE marking Light barriers Extraction and compact dust collector Protective cabin with Makrolon panels Clamping jaws D 15-200 mm U-shaped guide rollers for unloading station D = 200 mm 6 m unloading station with brush table Circumscribed circle diameter 250 mm incl. clamping jaw set and guide rollers SeamLine Tube Additional cutting head with 155 mm lens LoadMaster Tube 6 m with bundle support, 2 grippers Circumscribed circle diameter 250 mm LoadMaster Tube 6 m Low-scratch bundle support LoadMaster Tube 6 m Swiveling conveyor section LoadMaster Tube 6 m

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Ideal for building demolition shears, scrap shears, loppers -Connections via the piston rod Caedpfjb A Hufjx Aflja -Piston diameter: approx. 150 mm -Piston rod diameter: 80 mm -Stroke: approx. 420 mm -Total length extended: 1800 mm -Ideal for machines where the piston rod has to be protected -Number: 6 pieces available -Price: per piece

Condition: new, Year of construction: 2025, Model: K110 K230 K360 Working Area: from 8649×1398×1811mm to 10000×3500×2100mm Laser Output Power: 3000w/2000w/1500w/1000w X/Y-axis positioning accuracy: 0.05mm X/Y-axis repositioning accuracy: 0.03mm X/Y-axis Max. linkage speed: 60m/min 1. Integrated full protection cover Integrated full protection cover design, Caedpeg Rgt Uefx Aflja installing in place, greatly reducing installation time. 2. Bodor Genius T needle nose auto-focusing laser head Bodor Genius T needle nose auto-focusing laser head, applicable for all kinds of tubes such as angle steel, channel steel, I-beam, etc. 3. Rectangular Tube Welded Bed Simple structure and flexible layout. 4. Bodor Thinker 3.0 System The dedicated control system of tube cutting machine integrated with the most advanced technology, can cut angle steel and channel steel directly without nesting and returning home. 5. Applicable to smaller clamping diameter The rear jaws can clamp the pipe to go through the front chuck, which greatly shortens the physical distance between the cutting head and the rear chuck jaws. Tail length is reduced to 70mm and the material utilization rate is increased to 99%. 6. Ergonomics Loading and operating on both sides; and humanized interaction interface, convenient and smooth operation, and favorable user experience. 7. Integrated design Integrated design of electric control cabinet and main body, saving the space occupied, standardizing the line installation.

Condition: new, Year of construction: 2024, The Durma HD-TC 60220 pipe laser stands for maximum precision and efficiency in the processing of pipe materials. With its impressive maximum pipe diameter of Ø220 mm and the ability to cut both square profiles of 160 x 160 mm and rectangular profiles of 200 x 100 mm, this pipe laser offers exceptional flexibility for a wide range of applications. Thanks to the advanced automatic loading system, which can handle tubes up to Ø170 mm in diameter, and the ability to process materials up to 6500 mm in length, the HD-TC 60220 is ideal for projects that require fast production with consistently high quality. The minimum material length for automatic loading is 3000 mm, which further increases the efficiency of the machine and reduces processing time. Max. Tube diameter: Ø220 mm Laser power: 3 kW Max. Dimensions of the square profile: 160 x 160 mm Max. Dimensions of the rectangular profile: 200 x 100 mm Min. pipe diameter: 20 mm (12 mm with manual loading) Max. Tube diameter for automatic loading: Ø170 mm Max. Profile dimensions for automatic loading: 150 x 100 mm, 120 x 120 mm Csdpeq Tpkysfx Afleaa Max. Material length: 6500 mm Min. material length for automatic loading: 3000 mm Length of the last piece: 4000 / 6000 mm Unloading length: 150 mm Max. Material weight per meter: 52 kg/m Max. Material weight (total length): 340 kg Max. Loaded weight: 3000 kg Profile types: Round, Square, Rectangular, Elliptical Types of open profiles: L, U

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 12,000 W, Description BAISON V52U(12+12 meters): (12 or 20 kW) FOUR-CHUCKS HEAVY-DUTY TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND UNLOADING SYSTEM 12 meters automatic loading system + 12 meters automatic unloading system (can be equipped in different configurations ex:12+6 meters) This machine is also for profile, tub and different shape. Casdpfx Ajvcbw Dofloa Tube size range: Round tube: φ50-φ500mm Square tube: □50*50-□500*500mm Channel Steel: 5#-50# Angle Iron: 200*200mm I-beam:10#-50# H-beam:100*100mm-500*500mm Laser Power 12.000 W (Raycus) Max. Single Tube Weight 2.000 kg Claw Stroke Full stroke Min. Tail Length 0 mm Max. chuck speed 40 r/min Max Speed 50 m/min Max Acceleration 0.4 G Max. Tube Cutting Length 12.000 mm Ultra-short Tail Material 0 mm X-axis 500 mm Y-axis 12.000 mm Z-axis 500 mm Positioning Accuracy (X/Y) ±0.05 mm/m Repeated Positioning Accuracy (X/Y) ±0.05 mm Power Data 130kw / 225A Power supply 380V/50Hz/3Phases Power Protection Level IP54 Machine Size 29.080*5.000*3.250 mm Machine Weight 28.165 kg(Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 12 kW Laser head with automatic focus – RAYTOOLS BS12K-3D Controller system – FSCUT 5000A Automatic self-centering pneumatic chucks Semi-automatic loading system with chain Servo motors – VEICHI Reducer – TECHMECH High precision X/Y transmission mode with rack and rails – K.H Guide rail – SHAC Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Proportional valve – AVENTICS Welded and heat-treated machine bed – BAISON Wireless remote controller Computer with Windows 11 interface, Internet & WIFI Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Complete CE standard Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - our service team know from beginning how to respect service, installation and training. - for this machine the installation and training is 2 weeks. Not included in machine price. - we can offer cost also depend on end-user place and country. - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Official Seller CNC Top Ten bv Coevorden Netherlands

Condition: new, Year of construction: 2025, Effective Tube Cutting Length: 6500mm/9200mm Laser Output Power: 6000w/3000w/2000w/1500w Effective Round Tube Cutting Diameter: Φ20-230mm Effective Square Tube Cutting Diameter: □20*20-□160*160mm Edge Length: 20-170mm Outer Circle Diameter: ≤230mm Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. Cjdpfx Afjg Rgucoljaa 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability

Condition: new, Year of construction: 2024, Tube and flatbed laser 4 kW | Combi HD-F 3015 BH Laser combination machines Machine dimensions: - (L x W x H) 9,350 mm x 3800 mm x 2300 mm, length with filter 5300 mm. Technical details: - Max. Sheet size: 3,048 x 1,524 Max. - Max. sheet weight: 200 kg/m² -Laser power (IPG): 4 kW -travel Z - axis: 125 mm -Max. Synchronous speed (X-Y): 141 m/min. -Max. Acceleration (X-Y): 10 m/s² - positioning accuracy: ±0.05 mm - Repeat accuracy: ±0.05 mm Cutting area: - steel: 20 mm - stainless steel: 10 mm - Aluminium (AlMg3): 12 mm - brass: 10 mm - copper: 6 mm Equipment: IPG 4000W Fiber Laser Source (including cooler) Compact dust extractor (filter) for 4 kw Air conditioning in switch cabinet Cajdpfxofl T T Nj Aflea Flatbed laser with automatic shuttle table Laser cut monitoring Automatic laser head positioning CE - shuttle table with light barrier protection Control SIEMENS SINUMERIK 840D Auto focusing Precitec Procutter F150 focus cutting head Flatbed laser with shuttle table (automatic pallet changing system) Pipe cutting device lateral max. Ø400 mm Sheet metal testing (Autom. sheet metal position and size measuring system) Positioning laser diode Automatic nozzle cleaning Central lubrication Motorized chip conveyor Simple user interface parameters page (performance-speed-pressure) Software Lantek or Metalix Cad/Cam Software with Autonesting Lighting for the work area Multi-chamber suction system warning light Special Laser Cutting Options Positioning laser diode Pierceline (E