Used Tube for sale (1,997)

Condition: good (used), Year of construction: 2005, Static Garment Overhead System, Round Tube Overhead Conveyor, Meiko, approx. 5,000 m static crane rails, approx. 3,600 m trolley tracks, approx. 1,200 trolleys, 3 levels, incl. 2,852 m² mezzanine floor area, total area approx. 8,556 m² - used - : Net price ex-site: only €149,500 (net) including dismantling, packing, and loading Manufacturer: Meiko (SSI Schäfer) Technical support available from, e.g., BKLS Maschinenbau GmbH & Co. KG Type: Round Tube Overhead Conveyor Year of construction: 2005 Base area: approx. 2,852 m² (L = approx. 64.7 m x W = approx. 44.1 m) Total height: approx. 7.10 m Incl. incline conveyor Incl. 2 telescopic conveyors for easy loading and unloading of hanging textiles More detailed information available upon request! Pos. 1 LEVEL 0 (+0.000) 1,293 m horizontal running rail 52 m sloped running rail 52 m derailment protection for running rail 38 pcs. swing switches 2 pcs. spring switches Etc. Pos. 2 LEVEL 1 (height +3.790 top edge of floor) 472 m horizontal running rail 30 m sloped running rail 970 m running rail between storage areas 60 m derailment protection for running rail 48 pcs. swing switches 57 pcs. ball joint switches, complete, 2-way 2 pcs. ball joint switches, complete, 3-way 17 pcs. catch switches 3 pcs. HD manual stop 273 m fixed single-sided storage rail, double-deck 3,228 m fixed double storage rail, double-deck Etc. Pos. 3 LEVEL 2 (height +6.815 m top edge of floor), 1st construction phase 366 m horizontal running rail 22 m sloped running rail 398 m running rail between storage areas 38 m derailment protection for running rail 24 pcs. swing switches 31 pcs. ball joint switches, complete, 2-way 1 pc. ball joint switch, complete, 3-way 12 pcs. catch switches 3 pcs. HD manual stop 147 m fixed single-sided storage rail, double-deck 1,344 m fixed double storage rail, double-deck 1,170 m double pipe construction, galvanised (struct.), 2 x Ø 5/4", H = 150 mm 814 m² intermediate mezzanine Etc. Pos. 4 VERTICAL CONVEYING, LEVEL 0 TO LEVEL 2 1 pc. chain conveyor M 1, total length 112 m, consisting of: 1 pc. drive incl. maintenance switch, V = 12.5 m/min 1 pc. tensioning station 112 m conveyor chain incl. carrier, pitch 830 mm 1 pc. service station, L = 0.75 m 2 pcs. separable conveyor profile, L = 1.0 m 85 m straight conveyor profile 6 pcs. horizontal curve 180°, r = 600 mm 2 pcs. horizontal curve 90°, r = 600 mm 2 pcs. horizontal curve 45°, r = 600 mm 4 pcs. vertical curve UP 30°, r = 900 mm 4 pcs. vertical curve DOWN 30°, r = 900 mm 5 pcs. vertical curve UP 15°, r = 900 mm 5 pcs. vertical curve DOWN 15°, r = 900 mm 1 pc. cut-out for tensioning station 40 m derailment protection for running rail Pos. 5 TROLLEYS Approx. 1,200 double roller trolleys, type 53.083, with coding and coupling, loading capacity = 660 mm Pos. 6 TROLLEY CARS 10 pcs. empty trolley transport carts Pos. 7 CONTROL SYSTEM FOR CONVEYORS Kdsdpfx Ajx R Dnaeddjg Etc. Pos. 8 2,852 m² STEEL MEZZANINE Steel mezzanine according to DIN 17100 and DIN 18800 - Column grid approx. 4,970 x 4,900 mm, L = approx. 64.7 m; W = approx. 44.1 m; H = 3.10 m - Surface treatment: sandblasted, primed, and painted Color shade according to RAL, e.g., Crenteyreiss RAL 9001 - Anchoring: Column with base plate anchored to the floor Technical specifications: Load capacity of walkable surface 100 or 250 kp/m² Running rail load 60 kp/m Storage rail load 75 kp/m Building services 15 kp/m² Inspection is expressly recommended! Condition: good to very good Available: approx. Q2 2026 Loca

Condition: as good as new (ex-display), functionality: fully functional, Tube bending machine TUBEND TB 42 incl. 3 sets of tools Kdsdpfx Aoybca Ieddeg - CE marking - Capacity – diameter 42x3mm - Hydraulic drive - Adjustable stroke - Emergency stop function - Three sets of tools: 33.7mm / 26.9mm / 21.3mm - Documentation - 400 Volt connection Dimensions: LxWxH 1.1x0.7x1.5 m / weight approx. 500 kg Subject to errors and input mistakes.

Condition: ready for operation (used), Type: 1304 -The ZINSER cutting machine 1306 has been particularly developed for efficient machining of pipes for cylindrical pipes. Apertures, notches and the entire end preparation can be realized quickly and economically. A variety of standard figures is available from the ZINSER MCC software. Kjdpfox Imn Dex Addedg - Pipe cutting machine with track (X) and rotation axis (A) - Three-jaw chuck or four-jaw chuck - A hollow shaft through the chuck enables the use of an internal ventilation - CNC-controller - Thermal dynamics plasma power source with dialogue system - Torrit filter system - max cutting cap: 25 mm - X-movement: 5100 mm - Z-movement: 150 + 270 mm Plasmasource: Thermal Dynamics A60

Condition: good (used), Year of construction: 2006, 1 CNC tube end forming machine Kedpfsn Sm Ddex Addodg Manufacturer: BLM Type: Tube Form M32x1.5 Year of manufacture: 2006 Technical specifications Thrust force: 3.5 tons Locking force: 5 tons Working stroke: 130 mm Tool diameter: 80 mm Dimensions: 2400 x 1400 x 2000 mm Connected load: 12 kVA Weight: 2200 kg

Year of construction: 2014, condition: ready for operation (used), Additional Equipment Bundleloader: 6.5 meters Steploader: 6.5 meters Output with Conveyor Belt: 6.5 meters at the front, 4.5 meters at the back This BLM Adige LT8 4kW Co2 was manufactured in 2014. It features a Rofin DC035 3.5kw laser source and is equipped for tube cutting with a 3D cutting head. It handles materials up to 12mm thick and 206mm round, with lengths up to 6500mm. Consider the opportunity to buy this BLM Adige LT8 4kW Co2 tube cutting machine. Contact us for more information about this machine. Kodpfxox H A Rxs Addodg Application Types Cutting

Condition: new, Your contact person in our home: Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer a new square tube for sale here. Included in the scope of delivery: 01 x square tube, new Material color: hot-dip galvanized Overall length: 6.050 mm Profilabm.: 50 x 50 mm Material thickness: 2 mm Steel grade: S235JRH/275JRH Customs tariff number: 73066192 Production according to: EN 10219-1 Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Kjdpfx Adedzq Scededg Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)

Condition: good (used), The scope of delivery includes: 01x rectangular tube, used profile dim.: approx. 50 x 30 mm Material color: orange total length: approx. 3.660 mm center-center-hole: approx. 3.630 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill hole Ø: approx. 10 mm Weight / pc.: 6,150 Kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Kedpfx Adendiqdsdsdg General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Kedpfx Aepbvgdeddjdg Technical data for the plug-in tube: Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf cross beams Included in delivery: 01x plug-in tube, II. choice (new goods) Material color: galvanized Type: KRA 4300 Total length: approx. 390 mm Useful height: approx. 295 mm TubeØ: approx. 12 mm Weight / pcs.: approx. 0,070 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: as good as new (ex-display), Remark: Kedpfx Ajpbvgteddsdg This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the plug-in tube: Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf cross beams Included in delivery: 01x plug-in tube, II. choice (new goods) Material color: galvanized Type: KRA 4170 Total length: approx. 170 mm Useful height: approx. 95 mm TubeØ: approx. 12 mm Weight / pc.: approx. 0,030 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the pipe bracket: Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf beams Frame depth: 800 mm Kdodpfx Adepbvw Hsdeg Included in delivery 01x tube stirrup, II. choice (new goods) Partly with stirrup pad Type: KTB 80 Material color: galvanized Total height: approx. 420 mm Total depth: approx. 754 mm TubeØ: approx. 12 mm Weight / pcs.: approx. 0,250 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Ksdpfjvk Scgox Addodg Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: good (used), Year of construction: 2008, control type: CNC control, Stainless steel tube diameter: up to 42 x 2.0 mm Steel tube diameter: up to 42 x 3.0 mm Max. bending angle: +/- 180 + 10° Section modulus: 4.1 ccm Operating pressure: 6 bar Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 6100 x 2300 x 1300 mm Kdodpfx Adoya Enxodjg

Condition: good (used), Year of construction: 2005, control type: CNC control, - Max. bending angle: +/- 180 + 10° - Tube feed length: 4100 mm - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm - Square tubes: 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec (advance) Kjdpfxeya Ehxs Addjdg - Longitudinal feed speed: 450 mm/sec - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Condition: good (used), Year of construction: 1998, Tube diameter: 20 - 60.3 mm Kjdpfx Aeya Eb Eeddsdg Tube feed length: 4500 mm Machine weight approx.: 0.11 t Total power requirement: kW Space requirement approx.: 5700 x 1600 x 900 mm - Preselection of 4 bending angles via rotary selector

Condition: good (used), Year of construction: 1994, control type: CNC control, controller manufacturer: Siemens, controller model: 840 D, Pipe diameter: 168.3 x 11 mm Pipe insertion length: 6000 mm Maximum bending radius: 700 mm Control system: Siemens 840 D Minimum bending radius: 80 mm Maximum bending angle +/-: 190 ° Connected load: 400 V / 50 Hz / 85 A Dimensions (L/W/H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t Additional information: - CNC control: CNC MMI Multicontrol 2000 - Control system NCU - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tooling is available: Pipe Ø 48.3 mm; Radius 105 mm Pipe Ø 60.3 mm; Radius 120 mm Pipe Ø 63.5 mm; Radius 150 mm Pipe Ø 76.1 mm; Radius 190 mm Pipe Ø 88.9 mm; Radius 222 mm Pipe Ø 114.3 mm; Radius 285 mm Pipe Ø 139.7 mm; Radius 350 mm Pipe Ø 141.3 mm; Radius 700 mm Pipe Ø 168.3 mm; Radius 420 mm A few mandrels have a direct engraved marking. These have the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following outside diameters of the mandrels were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package is valued at approximately €150,000. Ksdpfeya Ebrsx Addedg

Condition: reconditioned (used), overall weight: 30 kg, chuck outer diameter: 200 mm, three-jaw chuck diameter: 200 mm, short taper mount: 6 mm, through hole: 45 mm, Three-jaw chuck and one three-jaw chuck for spare parts FORKARDT KTNCV 200-45, three-jaw power chuck; the listed price is for one three-jaw chuck without stepped top jaws Price for one set of base jaws: €150.00 ----- Jaw stroke via clamping cylinder and drawtube Chuck No. 1485270 with through-hole clamping (through bore). ----- Cylindrical flange mount according to DIN 55027 Short taper, taper size: KK6 Kedpfx Ajwuux Dsddedg ----- Three-jaw power chuck with quick-change system Also suitable for reversible base jaws, type: FGB 200 ----- Jaw interface: Base jaw type: spiral serration; Designation → Size: FGB200, SGB200 ----- Drawtube connection M52 x 2 mm Cylindrical mount for spindle flange ø 170 x 6 mm Mounting bolt circle for 3x taper screws approx. 135 mm ----- The chuck is in as-new condition. Weight without hard jaws approx. 25 kg ----- Delivery without base or top jaws *If you have any questions, we are happy to assist. *Shipping costs for international deliveries on request.

Condition: used, Air tube bundle extractor, air tube bundle assembly station for heat exchangers, cooling coil, cooling pipe, cooling spiral, tube bundle heat exchanger -Handover: in its current condition as inspected (without documentation) -Condition: Diesel engine currently out of service -Air tube bundle extractor: Hydro-Extractors INC -Type: 504- Diesel -Dimensions: 8400/1900/H2850 mm -Transport dimensions: 8400/1900/H1700 mm Kdodpfx Adsw Ty Dnsdsg -Weight: 6860 kg

Condition: ready for operation (used), Parker 80C080 Hose press press with hose jaws No. 241 Hose sizes: 1/4 " - 2" Power: 3 kW You are welcome to come by for a visit. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Visit our store and see our other offers. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Kdjdpfxjlvrlko Addeg Deviations from technical data as well as errors in the description of the article can happen and remain reserved.

Condition: ready for operation (used), Parker 80 CE 082 Hose press Crimping machine with hose jaws Power: 1.5 kW Jaw sizes: 1/2" ; 3/8" ; 3/4" ; 1" ; 1/4" You are welcome to come by for a viewing. We can also arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Kodpfsu Hidkox Addsdg Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site Ksdpfx Ajndn Ageddodg - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension Kdjdpong Exaofx Addeg 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: good (used), Year of construction: 2012, operating hours: 48,700 h, laser hours: 11,000 h, laser power: 2,700 W, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working range: 6,500 mm, Equipment: documentation/manual, safety light barrier, Purchase options: Option 1: Installation, commissioning and partial overhaul and training of up to 3 operators at the buyer's premises with functional guarantee on acceptance. Surcharge, plus transportation and travel costs. Option 2: Workshop overhaul of the machine with commissioning and acceptance in accordance with the manufacturer's instructions at our factory. Installation, commissioning of the machine and training of up to 3 operators at the buyer's premises, free delivery of spare parts up to 6 months after commissioning. Surcharge, plus transportation and travel costs. Delivery time +8 weeks. After completion of the work, the machine can be inspected under production conditions, we look forward to your visit Standard equipment - Sturdy machine frame with integrated laser unit - TruFlow 2000 high-frequency excited CO2 laser, cooling unit - Drives: Maintenance-free three-phase servomotors - NitroLine high-pressure cutting - Fast processing with SprintLine - Programmable cutting gas pressure setting - Laser cutting head with 5'' lens - Cutting head quick-change device - Laser power control - Laser logbook function Kjdpfoivaqiox Addedg - Automatic switch-off - Work area lighting - Sinumerik 840D control system: Open control system based on PC, simple operation, online help, diagnostic function, maintenance logbook, technology data, teleservice, 3.5'' floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully encapsulated and ventilated beam guidance, compact dust extractor, protective cabin - PRS 3001 ejection station with brush table - Set of clamping jaws D 20-85mm and D 85-150mm - 1 set of V-shaped molds and guide rollers for round pipes - 1 set of U-shaped forming shells and guide rollers with an enveloping circle diameter of 120mm Special equipment: + 2000 on Laser TruFlow 2700 + SeamLine Tube + LoadMaster Tube 6.5 m with bundle trough and plastic rollers + Discharge station 3m with belt table + Focus line + Additional tube support + finished part length + 1.5m

Year of construction: 2019, condition: ready for operation (used), This Durma HD-TC60170 was manufactured in 2019. It features a 3kW IPG Fiber laser source, capable of 2.5D cutting, and handles up to 170mm pipes and 120x120cm tubes. It includes an exhaust system, spatter guard, bundle loader for serial work, and a chain loader for smaller jobs. The machine has a 6.5 meter inlet and a 4.5 meter outlet, extendable to 6 meters. Contact us for more information about this machine. Kdodjx D Ir Topfx Addeg Application Types Cutting

Year of construction: 2006, condition: used, GENERAL INFORMATION Exchange surface: 24.7 m² Year of manufacture: 2006 Internal diameter: 508 mm Total height: 1,340 mm Total length: 3,270 mm Location: Bremen Technical documentation: drawing, TÜV certificates, acceptance certificate, CE mark and declaration of conformity Nameplate: Ksdpfx Ajxqch Nsddjdg Condition: used Last application: methanol condenser SHELL SIDE Shell volume: 390 liters TUBE SIDE Tube volume: 150 liters Shell material: AISI316 (V4A) 1.4571 Tube material: AISI316 (V4A) 1.4571 Number of tubes: 63 Max. permissible operating overpressure, shell side: 0.49 bar Tube diameter: 25 mm Max. permissible operating temperature, shell side: 100 °C Max. permissible operating temperature, tube side: 100 °C Max. permissible operating overpressure, tube side: 6.0 bar

Condition: good (used), Year of construction: 1999, AXOMATIC OPTIMA 1000 Tube Filling and Sealing Machine (Plastic Tubes) This compact machine has a capacity of up to 70 plastic tubes per minute and is used for filling and sealing tubes. With the appropriate format and pump sets, the machine can be adjusted to handle the following specifications: Tube diameter: 10 - 60 mm Tube length: up to 280 mm Filling volume: 2 - 300 ml The machine is offered with the following format parts: Kdsdpox Rqlfefx Addog Tube holders for plastic tubes Ø 35 mm and 48 mm Manufacturer: Optima Year of manufacture: 1999 Required floor space: approx. 180 x 160 x 240 cm