Used Tube for sale (1,988)

Condition: ready for operation (used), Pull tube for tensioning device from IKEGAI TURN 25 , length tube: 730 mm, Ø 75 mm, hydraulically operated, used, normal signs of wear, 100% functional ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Gsdsz Hic Nspfx Ag Tsuh

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension, Beavertail rear, Ramp Equipment: - Spare wheel - Shovel holder - Loading ramp Net: €5,621.85 / Gross: €6,690.00 Article number: VB4235401810.02 Technical data: • Brand: Variant • Model: 3518 B4 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 400 x 180 x 30 cm • External dimensions (L x W x H): 600 x 234 x 168 cm • Loading height of the floor: 30 cm • Permissible total weight: 3,500 kg • Tare weight: 815 kg • Payload: 2,685 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/60R12C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced aluminum diamond-plate fenders, walkable • Lateral grid steps, non-slip • Screen-printed plywood floor, 18 mm, non-slip and waterproof • Extremely stable, welded grid tube frame • Frame completely hot-dip galvanized • Steel loading ramp, upright on shaft, 130 cm • Stable eccentric locks • Support blocks on loading ramp • Very low chassis for a low loading angle • Beavertail rear / low loading for work platforms and excavators • Excavator bucket holder at the front • Spare wheel, mounted under the excavator bucket holder • 10x lashing eyes mounted in the outer frame (1000dAN/kg) • 8x lashing points on the inside • Parabolic axle from KNOTT • Parabolic axle for absolute heavy-duty use • Reverse automatic • KNOTT inertia brake and parking brake • Lockable tow hitch • Spare wheel, mounted under the excavator bucket holder • Very stable, bolted V-drawbar, REINFORCED • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Rear marker lights at the rear with rubber arm • Heavy-duty support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Guedpfeyyw N Asx Ag Teh Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, Year of construction: 2024, Pipe ramp / road ramp • Available in any desired width • Any desired flanges or couplings possible • Water flow up to 2500 m³ per hour • Height of flat section: 120 mm • High load capacity • 4 tubes for traffic trays Guodoz Rxrvjpfx Ag Tsh • Driving surface made entirely of chequer plate • 4 lifting eyes with D-shackle • Stackable and lockable • Fully customizable to your requirements! Condition: New Year of manufacture: 2024

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Guedpfx Aewz Rifog Toh Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, nominal power: 5.5 kW (7.48 HP), pipe diameter (max.): 1,600 mm, rotational speed (distance/time): 36,000 mm/min, sheet thickness (max.): 2 mm, sheet thickness copper (max.): 1 mm, sheet thickness steel (max.): 1 mm, sheet thickness stainless steel (max.): 1 mm, Equipment: emergency stop, scorer, HVAC – Spiral duct forming machine (SPIRO) for sheet metal, length 120–8000 mm, strip width 137 mm, sheet thickness: galvanized 0.4–1.2 mm / stainless steel 0.4–0.8 mm / aluminium 0.5–1.5 mm / copper 0.5–1.2 mm, speed 1–36 m/min, PLC, cutting with saw blade (4 kW), main drive 5.5 kW. This machine is the heart of production: it feeds the strip and outputs spiral ducts at high speed. Spiro duct diameter 80–1600 mm. Includes spare guide rollers and strip bars for various duct diameters. More information available on our website. Pictured in transport configuration. Gedpfx Ageykpb Rj Tjuh

Condition: used, functionality: fully functional, Wall Plate with Fixed Pin (Used) This used wall plate with fixed pin is an essential component for securely anchoring facade scaffolding to a building or wall. The wall plate is firmly attached to the façade and, together with a scaffold tube and coupling, forms a reliable connection that prevents the scaffolding from tipping over or shifting. Although this product has been used, it remains in good technical condition and is still highly suitable for professional use on construction sites. Ideal for contractors, scaffolders, and rental companies seeking affordable, robust solutions without compromising on safety or stability. Specifications: Material: Galvanised steel Type: Wall plate with fixed pin Application: Fixing scaffolding to the façade Condition: Used, quality-controlled Compatible with standard system scaffold tubes and couplings Benefits: Ready for immediate use on site Guedpfx Agew Exizs Teh Simple and quick installation Suitable for all common façade types Attractively priced alternative to new materials

Condition: used, This listing is for a Watson Marlow 604S Peristaltic Pump The unit is in full working condition and is ready for immediate release. Guedpfx Agoxv Ad Us Tjh The Watson‑Marlow 604S is a laboratory/industrial peristaltic (tube) pump, designed for dosing, metering, and fluid transfer tasks where the fluid must remain isolated from moving parts. It’s part of the “600” series of Watson‑Marlow pumps and is intended for relatively high flow rates in a controlled environment (e.g. labs, pilot plant, certain chemical or processing setups). Because it’s a peristaltic pump, the fluid only contacts the inner wall of a flexible tube, which makes it suitable for shear‑sensitive, corrosive or potentially particulated fluids, without contaminating the pump internals Strengths Clean & Isolated Flow: Because only the inner surface of the tubing contacts the fluid, there is no risk of cross‑contamination or fluid leaking into mechanical parts. Good Flow Capacity: With a relatively high maximum flow (≈ 11 L/min), it can handle moderate bulk transfer in addition to dosing. Robust Housing: The IP55 rating makes it resistant to dust ingress and water spray, which is beneficial in industrial or lab environments with splashes. Variable speed control: The broad control range allows fine tuning of flow. Relative simplicity of maintenance: Replacing tubing is straightforward compared to more complicated pump mechanisms (valves, seals, diaphragms, etc.).

Condition: used, This listing is for 1 of 18 Qiagen BGR-Z-Modul Dt-1100uL Bez Handler with grippers. Each boxed in original packaging These units is in full working condition and ready for immediate use The Qiagen BGR-Z-modul Dt-1100uL Bez Handler with Grippers (Part No. 9015210) is a component designed for use with Qiagen's automated liquid handling systems, such as the BioRobot 8000. This module facilitates precise and efficient handling of 1,100 µL volumes, equipped with grippers to manage sample tubes or plates, enhancing the automation of laboratory workflows. Key Features: Volume Capacity: Designed to handle 1,100 µL volumes, suitable for various liquid handling tasks. Gripper Mechanism: Equipped with grippers to securely handle sample tubes or plates, ensuring accurate placement and retrieval. Gedsxv Dnhopfx Ag Tsuh Compatibility: Specifically designed for integration with Qiagen's automated systems, ensuring seamless operation and reliability.

Condition: used, This listing is for the Watson Marlow 620 Du/R Peristaltic pump The unit is in full working condition and is ready for immediate use The 620DU is a process peristaltic pump (i.e. hose pump) designed for metering, dosing, and transfer of fluids. Because it is a peristaltic design, the fluid is contained entirely within the tubing, avoiding contact with internal moving parts (other than the tubing). It is suitable for remote control, automation, and integration into control systems (SCADA, factory logic, etc.). Gusdpjxhdt Iofx Ag Tsh Wide control range & precision: The large turndown (2,650:1) gives flexibility to handle both very low and high flow rates with fine control. Remote / automation capabilities: Because it supports analog and digital interfaces, it’s well-suited for integrated systems. Pump protection & security: PIN locking helps avoid unintentional changes in process-critical applications. Low maintenance on non‑wetted parts: Since only the tubing contacts fluid, mechanical wear is mostly on the tubing, making part replacement simpler. Safe to run dry: Peristaltic pumps typically tolerate running dry without damage (unlike many positive displacement pumps). Reversible / ability to back‑flush: This is helpful when attempting to clear lines or avoid clogging. Limitations / Considerations Tubing wear / life: The hose or tubing is the consumable component. Chemical compatibility, pressure, and mechanical stress affect how often tubing needs replacement. Upper pressure / flow limit: While it handles decent pressure (~2 bar standard, possibly up to 4 bar variant), it’s not suited for very high-pressure pumping tasks. Enclosure limitations (non-“N” model): The standard 620DU is not fully sealed, so it may not be ideal for wet or harsh environments unless you use the “N” variant. Cost / complexity: More features, interfaces, and protection can make the system more complex (and costlier) to configure, install, and maintain.

Condition: used, This listing is for the Autoclude Model V Peristaltic Pump The unit is in full working condition and is ready for immediate use The Autoclude peristaltic pump is a type of tube (hose) pump made by Verderflex / Autoclude. Its defining feature is that only the flexible tube (or hose) inside the pump is in contact with the fluid being pumped. The rest of the pump (rollers, casing etc.) stay clean / isolated. This makes them good for contamination-critical, corrosive, slurry, or shear-sensitive fluids Design / Key Features Gsdpfx Agsxhduxs Teuh Some of the design / functional features: Seal-less and valveless: Since fluid is contained within tube, no seals exposed to fluid or valves that could leak. Self-priming: Can start pumping without needing fluid completely filling the inlet, and often able to handle gas or ‘air’ in the line. Capable of running dry without damage (when tube material allows) for short durations. Electrolab Group Reversible flow: The rotor or drive can reverse, so flow can be reversed to purge lines, etc. Gentle pumping: Because fluid only contacts tube, and the shearing is limited, better for shear-sensitive liquids / slurries. Rapid tube replacement Stackable / multi‑head options: Some “easy tube loading” models allow several pump heads to be driven by a single drive unit, for multi‑channel or sampling/analysis setups

Condition: used, This listing is for the GE Healthcare (now Cytiva) GE Axicrom 50/300 Chromatography column The unit is in full working condition and is ready for immediate use Gsdpsxhdxdofx Ag Touh The AxiChrom line is a series of chromatography columns by GE Healthcare (now Cytiva), designed for preparative / process chromatography scale. The “50/300” refers to the diameter and tube length / “bed height” configuration. Key details: 50/300: This is the smallest of the larger-scale columns. The “50” refers to the internal diameter (ID) of the column tube (50 mm), and “300” refers to the bed height (300 mm) for the “short” version. There is also a “50/500” for longer bed heights (500 mm). It uses axial compression, meaning the packing medium is compressed hydraulically from the top adapter, which helps ensure uniform packing density. The materials are designed to meet regulatory standards (USP Class VI, etc.

Condition: used, This listing is for the Olympus CX31RBSF Microscope The unit is in full working condition and is ready for immediate use Overview The Olympus CX31RBSF is an upright, binocular compound biological microscope, part of Olympus’s CX series known for its durable, ergonomic design and high-quality optics tailored for educational and routine clinical use. Key Features & Specifications Optical System & Image Quality Utilizes the UIS 2 (Universal Infinity System) optical system, delivering bright, high-contrast images with excellent field flatness. Equipped with Planned Achromat (PLCN) objectives offering superior sharpness and clarity across the field of view. Features integrated anti-fungal treatment on optics to preserve performance in high-humidity environments. Optical Components Eyepieces: Wide‑field binocular type (Field Number = 20), with a 30° inclination and interpupillary adjustment between 48‑75 mm. Objectives (typical standard set): Plan Achromats at 4×, 10×, 40×, and optionally 100× oil immersion (in some configurations). Scribd Gedpfx Ajxhfd Ijg Tsuh Condenser: Built‑in Abbe condenser with NA of 1.25 (with oil immersion) and aperture iris diaphragm for precise illumination control. Illumination & Stage Comes with a built‑in Köhler illuminator using a 6 V, 30 W halogen bulb. Stage: Rackless design with a double-slide holder, complete with ergonomic tactile grips for smooth X‑Y movement; stage travel approx. 76 mm × 50 mm. Ergonomics & Build Quality Featuring a rigid Y-frame, low-positioned coaxial coarse/fine focusing knobs, and pre‑focus upper limit to prevent contact with slides. Integrated hand grips make transport within labs easy and safe. Some models in the CX31 line include tilting binocular tubes, though CX31RBSF is typically fixed Dimensions & Operating Conditions Approx. 233 mm (W) × 411 mm (H) × 367.5 mm (D), weighing around 7.7–8 kg. Designed for indoor use at altitudes up to 2000 m, ambient temperature range 5 °C to 40 °C, with humidity restrictions depending on temperature.

Condition: used, This listing is for the Labtec SciLog Tandem 1081 ChemTec Peristaltic Pump with Tandem Model 1081 Head The unit is in full working condition and is ready for immediate use Dual‑head design Equipped with two independent pump heads, allowing simultaneous delivery of two separate fluid lines or higher combined flowrate. Flow & pressure range Capable of delivering metered flow in applications like bioreactors, diafiltration, titration, and general chemical dosing. It handles pressures from 0 up to approximately 60 psi. Precise liquid metering Designed for volumetric and mass flow measurement tasks, maintaining consistency in dosing/reagent addition. Control interface Includes an RS‑232 serial interface for external control via software or integration into automation systems Gsdpfx Agexhfg Nj Tsuh Use Cases Bio‑processing & fermentation: Automated nutrient or reagent addition in tandem line setups. Filtration processes: Controlling flow through membranes in diafiltration or tangential flow filtration. Titration and pH control: Precise dosing of acids/bases based on sensor or feedback-controller inputs. General lab fluid handling: Pumping corrosive or viscous liquids safely without contamination, thanks to peristaltic tubing.

Condition: used, This listing is for the Ika MS1 Mini Shaker The unit is in full working condition and is ready for immediate use The IKA MS1 MiniShaker is a compact laboratory orbital shaker designed for efficient mixing of test tubes, small vials, and microtiter plates. It offers thorough and uniform mixing for a variety of applications. Key Features Orbital diameter: 4.5 mm for smooth, effective mixing action Speed range: 0 to 2,500 rpm With microtiter plates or test tube inserts: ~1,000 rpm max Gedpfx Agsxhfumo Touh With rubber cup or direct contact: up to 2,500 rpm Operating modes: Touch mode: activates mixing only when pressed Continuous mode: engineered for uninterrupted operation

Condition: used, This listing is for the Cole Parmer Techne Blockice Cooling Heating Block The unit is in full working condition and is ready for immediate use The Cole Parmer Techne BLoCKICE (also referred to as CB-200, FBLOCKICE) is a benchtop Peltier-cooled/heated block designed for precise incubation of sample tubes between 0 °C and 40 °C, ideal for maintaining biological samples within the 4–37 °C range Precise temperature control: Utilizes Isotemp™ technology to ensure uniform temperature across both aluminum blocks, with stability to ±0.2 °C Versatile block inserts: Holds two standard interchangeable aluminum insert blocks from the Dri‑Block® range; can use one double-width insert for higher tube volumes Gjdpfx Agexhfypo Tjuh Timer & alert system: Integrated count-up/count-down timer programmable up to 9 days. Timer begins only once the set temperature is achieved, with an audible buzzer at completion User-friendly interface: Features a five-digit LED display in °C or °F, plus a dark lid to protect light-sensitive reagents and help maintain temperature Dimensions & build: Compact footprint (~190 mm × 240 mm × 225 mm), weighing ~3 kg, operating on 100–230 V AC, 50/60 Hz Performance notes: Achieves 4 °C within ~30 minutes at 20 °C ambient; reaching extremes like 0 °C or 40 °C may take hours, although pre-cooling inserts can accelerate that

Condition: used, This listing is for the VELP ZX4 Mixer Vortexer The unit is in full working condition and is ready for immediate use The VELP ZX4 is a robust, high-performance vortex mixer designed for everyday lab mixing needs. With variable speed control, a patented infrared (IR) sensor mode, and a wide accessory range, it’s ideal for labs that require ergonomic and flexible operation. Key Features & Benefits Variable Speed Operation Electronically controlled vortexing with speeds from 0 to 3,000 rpm, ideal for gentle mixing or vigorous agitation. Dual Operating Modes IR Sensor Mode (patented): Automatically activates mixing when a test tube is detected—no need to press down. Continuous Mode: Maintains consistent mixing without user interaction. Universal Power Compatibility Works with a universal voltage/frequency range (100–240 V, 50/60 Hz), making it ideal for international labs. Gsdpfxjxhfzge Ag Teuh Compatible with various attachments for tubes, microplates, and small flasks. All accessories attach via simple pressure-fit—no tools required. High Chemical Resistance Durable technopolymer casing offers optimum resistance to common lab chemicals and solvents. Exceptional Stability A zinc alloy base provides outstanding stability even at high speeds. Large anti-slip rubber feet ensure the mixer stays securely in place during operation. IP42 Protection Designed with IP42-rated protection against particle ingress and liquid splashes—safe for demanding lab environments Applications Mixing of microcentrifuge tubes, PCR tubes, vials, and microplates Ideal for biology, chemistry, and biochemistry labs Perfect for repetitive tasks—IR sensor mode reduces wrist strain

Condition: used, This listing is for the Bioer Quant Gene 9600 Fluorescent Quantitative Detection System The unit is in full working condition and is ready for immediate use Bioer LineGene Plus 9600 FQD-96A – Fluorescent Quantitative Detection System Key Specifications Sample Capacity: 96-well 0.2 mL PCR plates, 12 × 8-strip tubes, or 96 × 0.2 mL single tubes (transparent bottom) Reaction Volume: 5–100 µL Dynamic Range: 1–10¹⁰ copies/µL Gedpfexhgfgsx Ag Tjuh Detection Channels: 5 or 6 channels (F1–F6) Excitation Wavelength: 300–800 nm Emission Wavelength: 500–800 nm Temperature Range: 4–105°C (0.1°C increments) Temperature Control Accuracy: ±0.1°C Temperature Uniformity: ≤ ±0.3°C Heating Rate: Up to 4.0°C/s Cooling Rate: Up to 4.0°C/s Hot Lid Temperature Range: 30–110°C (adjustable, default 105°C) Gradient Temperature Range: 1–36°C Scanning Mode: Full-plate scanning and designated line scanning (5.5 seconds per scan) Programming: Up to 20 segments per program, up to 99 cycles Operating System Compatibility: Windows 7/8/10 Software Requirements: Microsoft Excel 2000/2002/2003/2007/2012 Minimum Computer Configuration: RAM: 512 MB; Hard Disk: 10 GB; CPU: Pentium 4; Virtual Memory: ≥1000 MB Power Supply: 100–240V, 50/60Hz, 600W Dimensions: 410 mm (W) × 386 mm (D) × 352 mm (H) Weight: Approximately 20 kg Certifications: CE, EMC, RoHS2.0, MET .

Condition: used, This listing is for a Thermo Scientific Heat Block The unit is in full working condition and is ready for immediate release The Thermo Fisher Heat Block – Dry Bath is an advanced and versatile laboratory device designed to meet a variety of heating needs in research, clinical, or industrial applications. This digital dry heater offers precise control over temperature and time, making it ideal for experiments that require consistent and uniform heating. Key Features: Gusdpfx Agexv D A Es Toh Dynamic Temperature Stability: This heat block provides excellent temperature uniformity of less than ±1.0°C and temperature accuracy of less than ±0.5°C at 37°C, ensuring reliable and reproducible results. Proportional-Integral-Derivative (PID) Controller: The PID controller offers precise control over the heating process, allowing users to select specific temperatures and times. The system also enables fast heat-up for samples, optimizing workflow and reducing wait times. Wide Temperature Range: Temperatures can be set in 0.1°C increments, ranging from ambient +5°C to 130°C, making the heat block adaptable for a wide range of applications. Programmable Timing: The heat block includes a programmable timer that can be set for up to 99 hours and 59 minutes. This feature allows users to run multiple processes without needing to monitor the heating continuously. Interchangeable Blocks: The Thermo Fisher Heat Block is designed for flexibility, with interchangeable blocks that can accommodate various tube sizes, vials, and microplates. This makes it suitable for a broad range of lab applications. Digital Interface: The heat block features a user-friendly digital interface, making it easy to set and adjust the temperature and time. Reliability for Multiple Applications: These dry baths are an excellent choice for labs needing a sophisticated, reliable heat block for applications like PCR, enzyme digestion, sample incubation, and more.

Condition: used, This listing is for the Watson Marlow 313X Extension Rapid Load Pump Head Guodpsxv D Injfx Ag Tsh The unit is in full working condition and is ready for immediate release Key Features Watson Marlow 313X Peristaltic Pump Head The Watson Marlow 313X is a robust, single-channel peristaltic pumphead known for its precision, versatility, and ease of use. Designed for lab, diagnostic, and OEM applications, the 313X features a flip-top rapid-load mechanism, allowing quick and secure tube changes while maintaining consistent flow performance. Roller Configuration: 3-roller or 4-roller Max Flow (3-Roller): Up to 2000 mL/min Max Flow (4-Roller): Up to 1200 mL/min Max Speed: 400 rpm Compatible Tubing Sizes: 0.5 to 8.0 mm ID Wall Thickness: 1.6 mm Max Continuous Pressure: Up to 2.0 bar (depends on tubing) Materials: Back: Glass-filled polypropylene Front: IXEF Rotor, Clamps, Mounting Plate: Glass-filled nylon Rollers: MoS₂-filled nylon Accepts 1.6 mm wall standard tubing Quick, error-free tube loading with flip-top design—automatically positions and tensions tubing Add up to five extension pump heads (depending on tubing type and size) Modular design—easily expand pumping capacity Durable construction with chemically resistant materials

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: BD89NC2A1S, bending angle (max.): 190 °, overall weight: 2,000 kg, total length: 4,300 mm, total width: 1,300 mm, total height: 1,600 mm, power: 11 kW (14.96 HP), input voltage: 380 V, type of input current: AC, warranty duration: 12 months, Semi-Automatic Single-Head Hydraulic Pipe Bending Machine BD89NC2A Machine Model: BD89NC2A Machine Applications  Transportation Sector For locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar Guodpfx Aovu R Ameg Tjh components, and frame structures.  Furniture Industry Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. The largest applicable carbon steel pipe (bending radius ≥ 2d) Φ89×3.0mm (thickness Max. 3.0) The largest applicable stainless steel pipe (bending radius ≥ 2d) Φ76×2.0mm (thickness Max. 2.0) Maximum core length (*) 3500mm Maximum bending radius (*) 450mm Maximum bend angle 190° The number of bends that can be set for each pipe fitting (*) 25 bends The number of pipe fitting files can be set 280 sets (extensible) Working speed bending speed Max.30°/s Machine tool bending angle ±0.1° Hydraulic motor power 11.0kw

Condition: new, Year of construction: 2025, Weights Empty weight: 3.300 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 4 Other information Fits to following machines: 28-45TON Gedpfxsv Nhv Hj Ag Tsuh Delivery terms: FOB Transport dimensions (LxWxH): 250015001,2 Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH40ST Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 28-45TON Weight: 2800 kg Working pressure: 180~ 220Bar Oilflow: 200 l/min Centrifugal Force : 602 kN Frequency: 2700 rpm Eccentric moment: 6 kgm AVH40ST is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H,I Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile Drivers.AVH40ST is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: reconditioned (used), machine/vehicle number: 18587 / ref.BM5136, overall weight: 300 kg, Ref. BM5136 single stitching head flat- /saddle stitching (swivelling table) thickness 1 sheet to 25 mm, clips reversed backward stab stitching up to 40 mm paper thickness staple width 14mm round wire No.30-21 + flat wire No. 0-V jib length 320 mm stitching table 610 x 200 mm space required B65 x T70 x H160cm Gjdsqpd Ruopfx Ag Tjuh packings dims W80 x D90 x H180cm, 240/300kg drive 220/380 Volt, 50 cycles, 1/3 HP

Condition: new, Tubend TT 90 pipe grinding machine Tube grinding machine Incl. 10 pieces. Grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 49.5 - 57.5 - 73.5 mm Incl. 6 sanding belts Belt width 100 mm Belt length 1250 mm Pipe diameter 16.5 - 90 mm Angle adjustable from - to 0 - 65 degrees Supply voltage 400 V Guodpfx Agjt Sumas Toh Total power requirement 2.2 kW Machine weight approx. 0.18 t Space requirement approx. 1.2 x 0.6 x 1.3 m Pipe clamping range 90 mm Documentation (English)

Year of construction: 2003, condition: like new (used), Used Trumpf Tubematic cnc tube laser for sale Year / new 2003 Power 2kw / 2000watts The machine is rated at 6.1metre yet has been loaded to cut 7.5metre tube Gusdogzhb Tepfx Ag Tsh Max dia tube as per photo We can deliver and install complete with tuition at extra cost

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Gujdpsghrguefx Ag Teh Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.