Used Tungsten Carbide for sale (522)

Condition: new, Year of construction: 2025, High-performance band saw machine with hydraulic saw frame lowering (control valve) for miter cuts from 0° to 60° right / 45° left Torsion-resistant, robust cast saw frame Powered chip removal brush Cut feed via frame weight Dodpfx Aoxlhmysdascp Miter angle adjustment and clamping manual Quick-action, movable vise Electric coolant pump Precision-ground, carbide saw band guides (adjustable) Large-diameter round support table, rotates with the miter, miter scale visible from the operator side Easily removable chip tray Material stop 500 mm with scale Includes combination-tooth saw band 4/6. Technical Data Motor: three-phase 400 V, 1.5 kW Saw band dimensions: 2720 x 27 x 0.9 mm Flywheel diameter: 325 mm Cutting speed: 20-120 m/min Vise clamping range: 320 mm Working height: 760 mm Weight: 390 kg Machine dimensions (W x D x H): 1480 x 1700 x 2000 mm

Condition: used, Year of construction: 2007, HOLZ-HER – 6310 CUT 110 580 Computer-controlled Panel Saw Watch the video of the machine: Year of manufacture: 2007 Machine number: 136 The machine has been overhauled in all essential mechanical components. New PC, new label printer, etc. in 2023 Technical Specifications and Description: Base machine: Pressure beam saw Version: Fence on the right Saw cycle: away from the fence Cutting length: 5,850 mm Cutting width: 5,850 mm Saw Blades: Main saw blade Ø 400 x 4.4 x 30 mm, Z72, FZ/TZ (not included!) Tungsten carbide pre-scoring blade Ø 180 x 4.4/5.4 x 30 mm, conical (not included!) Cutting Height Cutting height: 110 mm Saw blade projection: 120 mm Pressure beam: pneumatic, pressure adjustable Dedpfx Adjw I Uxpjaocp Extraction: Central moving dust channel on the unit Extraction port base machine: 1x Ø 160 mm, positioned on the right side Dust channel in pressure beam: 2x Ø 120 mm – 1x top left, 1x top right with cutting length 5,850 mm: 3x Ø 120 mm – 1x top left, 1x top center, 1x top right Extraction air velocity: 30 m/s Air volume: 4,000 m³/h at 30 m/s Compressed Air Air consumption approx. 32 l/min at 6 bar per cutting cycle Switchable collet chuck pressure Switchable from the control panel For sensitive panel materials Automatic cutting length limitation The saw unit detects the workpiece end using a non-contact sensor and optimizes the cutting cycle Offcut device For cutting without leftover piece Clamps retract into recessed pressure beam Width Stop Precision-guided, freely programmable width stop with clamps Rack-and-pinion drive for precise positioning With surface-hardened linear guides Return speed of panel pusher: 80 m/min Forward speed of panel pusher: 80 m/min (EU – max. permissible forward speed 25 m/min) Max. opening for clamps: 120 mm for longitudinal and cross cuts Clamps, floating design Compensate for internal stress in panel packs upwards – 6 pcs for 3,250 mm cutting length – 7 pcs for 4,250 mm cutting length – 8 pcs for 5,850 mm cutting length Control CUTCONTROL 2 with 15" TFT display Operating system Windows 2000 RJ45 network connection 10/100 Base-T Fast Ethernet Intel Celeron processor Midi tower US keyboard Optical mouse CD ROM drive Control panel located on fence side Clearly arranged graphic-based operator interface for easy handling and order/material management on Windows basis Realtime display Large, clearly structured buttons All functions accessible from one level No limits in input fields and unlimited job inputs possible Control Functions Direct Cut: Cutting by direct entry of cutting dimensions. Processing of absolute, serial, or format cuts, with integrated grooving, notching, or positioning cuts. Unlimited jobs programmable. Job prioritization (prioritization possible at any time). Order programming parallel to cutting. NC Cut: Processing of optimized jobs. Graphical machine overview with machine process flow function ...

Condition: good (used), Technical parameters Maximum cutting capacity Round 650mm Square 650×800mm Saw blade Saw blade speed 20~80 m/min Saw size 54X1.6 Guides Carbide and bearing blade guides Cleaning Wire brush & flood coolant Tension Dcodpeullzhofx Adajp Hydraulic Motor power 7.5 kW Hydraulic 2.2 kW Coolant 0.12 kW

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Dodpfxovvi Spj Adaocp

Condition: new, The KF 200 is a robust Edge Beveling Machine from KNUTH, designed for efficient chamfering, deburring, and 45° beveling of steel, aluminum, and a variety of other materials. Its compact dimensions and simple operation make it particularly well-suited for large workpieces, including heavy metal sheets and long profiles. With tungsten alloy blades, the KF 200 offers superior tensile strength, hardness, and longevity, ensuring that demanding tasks are executed with precision. This machine operates at a speed of 3,500 revolutions per minute and can achieve chamfer heights ranging from 0 to 5 mm, making it versatile for different applications. Standard equipment includes a set of cutting inserts and an operator manual, allowing you to start working immediately. Whether you're preparing weld joints or performing intricate deburring tasks, the KF 200 stands out in the Edge Beveling Machines category. To enhance your production capabilities, request a quote today and elevate your sheet metal processing with KNUTH. Dcjdeq Ny R Sjpfx Adaop

Condition: used, Year of construction: 2017, Number of motors 2x 1.2 kW Stück 0 2800 mm Control ja 0 OMGA Double Glazing Bead Saw Model TRF 527 NC CE ----- Sold on behalf of the customer from the customer's location. The machine was in use until closing and is now at the customer's warehouse. Technical manufacturer's description: Double miter saw for cutting two glazing beads simultaneously. The right saw unit is fixed; the left unit is adjusted via the positioning control. Features of the positioning control: - Monochromatic graphic display 240 x 64 pixels - Display of 30 characters on 8 lines - Keypad with 28 function keys - FN key for interrupting the function - Diagnostics and error messages - Language selection: Italian, German, British, Spanish, French, and Swiss - 10,000 memory lines divisible into 999 cycles, max. 99 lines per cycle - RS-232 interface - Dimensions can be entered manually or via USB interface - 3 correction values ??each for the left and right saw units - 1 correction value for counter profiles The adjustable unit is equipped with recirculating ball bushings and runs on steel-hardened axes. Both units have supports that allow the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process is complete, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. Machine features: - Fixed right-hand saw unit - Pivoting clamping device - Positioning control for TRF 527 NC CE - Maintenance unit Dodpfx Aexmamnjdaecp - Center support - 220 mm Ø carbide-tipped saw blades - Two-hand control - Intermediate support for simultaneous sawing of two glazing beads - Pneumatic saw unit lift - Motor protection switch - Pressure switch - Undervoltage release - Overload switch - Tool set - 2 x 4-position angle star saw holders Technical specifications: - Motor power: 2 x 1.2 kW - Saw blade diameter: 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90 degrees: 55 mm - Max. cutting width at 45 degrees: 40 mm - Max. cutting length: 2800 mm - Min. cutting length: 158 mm - Weight 217 kg ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus VAT.

Condition: new, Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in industrial applications. Technical Data: Cutting Capacity: Round 0°: 235 mm Square 0°: 200 x 200 mm Flat 0°: 280 x 190 mm Round 45° right: 190 mm Square 45° right: 170 x 170 mm Flat 45° right: 190 x 180 mm Round 60°: 120 mm Square 60°: 120 x 120 mm Flat 60°: 120 x 115 mm Round 45° left: 175 mm Square 45° left: 145 x 145 mm Stepless cutting speed: 20 - 90 m/min Saw blade: 2645 x 27 x 0.9 mm Working height, approx.: 990 mm Coolant pump: 100 W Saw motor: 1.5 kW Electrical connection: 230 V Dimensions (LxWxH), approx.: 1600 x 1100 x 1500 mm Dcsdpfx Ajqbr Suodaep Weight, approx.: 295 kg Features: - Double mitre saw with pivoting saw frame from left -45° to right +60° - Generously dimensioned cast saw arm for low-vibration operation - Infinitely variable saw speed for optimum adjustment to the workpiece - Hydraulic lowering cylinder, infinitely adjustable - Quick-release vice for easy and fast workpiece clamping - Precise, adjustable saw band guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of delivery: - Bi-metal saw blade - Blade tension adjustable via manometer - Carbide blade guides - Quick-release vice - Material stop - Coolant system incl. pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shut-off at end of cut - Base frame

Year of construction: 2012, operating hours: 7,357 h, condition: ready for operation (used), Movement X-Axis Movement 600 Dcjdpfxew Nlbqs Adaop Y-Axis Movement 420 Z-Axis Movement 370 Additional Equipment Replaceable paper filter / SEC-10 (C-axis) / SGF2 Nano Wear Unit / Fire Extinguisher / TMM3 Power Generator / Dielectric Cooling Unit / 15" TFT Touch Screen / Lowerable Work Container Linear motor (X-, Y-, Z-axes) / Glass scales in X-, Y-, Z-axes / Ceramic work area / Remote control Accessories include electrodes (graphite, tungsten, and copper), electrode holders, and jigs with documentation. / Some electrode holders with electrodes are still in the machine. This Sodick AG60L Die-sink EDM machine was manufactured in 2012. It features a ceramic table measuring 750 x 550 mm and can handle a maximum workpiece weight of 1500 kg. The machine includes a linear motor, glass scales, and a remote control for enhanced precision and ease of use. Consider the opportunity to buy this Sodick AG60L die-sink EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: excellent (used), functionality: fully functional, Radius and round arch cutter set Field of application: Solid wood, wood panel materials, solid surface materials and much more. Consisting of: 1. Scheer HM 16 hand router Power 1800 W / 18000 rpm 220 V Tool: Carbide insert router 16 mm Cutting length 50 mm Storage case for machine and tools 2nd radius milling device ¼ circle from R 30 - 160 mm 3. radius milling device ¼ circle from R 110 - 360 mm 4. round arc milling device with radius ruler Dodpjuy T Exofx Adaecp For radii from 300 - 5500 mm For the production of round, stitch and basket arches Machine and device fully functional and cleaned

Condition: excellent (used), Flax enaker Make Bilz Carbide different sizes: • 32 mm • 34 mm • 39 mm • 42 mm • 44 mm • 47 mm Dodpod Sgvdjfx Adajcp • 49 mm • 50 mm • 52 mm • 57 mm • 60 mm • 62 mm • 65 mm • 68 mm • 69 mm • 70 mm 72 mm 74 mm • 75 mm 80 mm 87 mm • 90 mm • 92 mm 107 mm 117 mm Single purchase possible

Condition: new, The VB 300 A Vertical Bandsaw is a versatile addition to any workshop that processes steel, making it an essential tool within the Industrial Saws category. This model is designed for all-round use, with features like a torsionally rigid steel construction ensuring a robust design and stability during operation. The functional design promotes easy handling, while the swiveling support table allows for precise angled cuts. With electronically controlled saw blade speed displayed on a large digital screen, you benefit from increased accuracy in your projects. The machine includes adjustable saw blade guides with carbide jaws for different thicknesses, a blade tensioning system that can be micro-adjusted via a hand-wheel, and a minimum quantity cooling device which prolongs blade life, reduces costs, and saves machining time. In addition to the standard equipment, such as the saw blade welder and coolant system, you can enhance your workshop’s capabilities. Order online to experience the performance of the VB 300 A in your Vertical Bandsaw lineup today. Dedpfx Adjqhkkzeascp

Condition: excellent (used), Year of construction: 2012, operating hours: 8,500 h, Rösler ST 700 PS Blasting System TECHNICAL DATA Year of manufacture: 2012 Operating hours: Approx. 8,500 h System width: 1,270 mm System depth: 1,050 mm System height: 1,640 mm Blasting chamber width: 740 mm Blasting chamber depth: 760 mm Blasting chamber height: 490 mm Blasting gun/air nozzle diameter: 2-3 mm Blasting gun/air nozzle diameter: 6.5 mm Nozzle material: Ceramic or boron carbide Air consumption at 5 bar / hour: 13 - 30 m³/h Filter area: 2.5 m² Extraction capacity: 150 m³/h Fan power: 0.25 kW SCOPE OF OFFER INCLUDING (non-exhaustive list): Rösler Blasting System Container / Basket Extraction / Filter System Exact scope of supply as shown in the photo gallery Dedpfx Ajwf Hmbsdascp No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: new, Machine in stock and immediately available Horizontal Mitre Bandsaw S 225 G Cutting capacity at 90°, round: 225 mm Cutting capacity at 90°, square: 200 x 200 mm Cutting capacity at 45°, round: 160 mm Cutting capacity at 45°, square: 160 x 160 mm Cutting capacity at 60°, round: 100 mm Cutting capacity at 60°, square: 100 x 100 mm Saw blade: 2480 x 27 x 0.9 mm Cutting speeds: 45 / 90 m/min Motor power: 1.5 kW Voltage: 400 V Features: - Saw bow swivels up to 60° - Two blade speeds for optimal adjustment to the workpiece - Ideal for cutting pipes, profiles, and solid material made of stainless steel, iron, etc. - Generously dimensioned saw arm for low-vibration operation - Saw arm lowering via hydraulic cylinder - Quiet operation due to robust construction - Automatic shut-off after cut completion via micro switch - Quick-action vice for simple and fast workpiece clamping - Precision, adjustable saw band guides for optimal cutting results - Coolant system with pump - Includes base frame - CE/IEC compliant, German documentation and German service Scope of delivery: - Bi-metal saw blade 2480 x 27 x 0.9 mm, 6/10 TPI - Carbide guides (4 jaws) - Adjustable workpiece stop 0.5 m - Band tension manometer - Quick-release vice - Integrated coolant system - Hydraulic bow lowering Dcsdpfx Asd R Skledasp - Motor protection switch - Automatic end-stop - Base frame

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height -- mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Fully automatic band saws with two-column guide for series cuts in particular materials that are difficult to machine and solid material. With this machine, MEP offers you a machine that is technically on the highest level and by using the highest quality materials one is not has an unbeatable, robust and torsion-resistant structure. An extreme Robust saw bow made of gray cast iron ensures the necessary stability impressive cutting results and the strong cast iron columns which the saw arch slides by means of pre-stressed linear guides take care of themselves at maximum load for the highest cutting precision. The modern Machine control (MEP NC 5.0) offers the user maximum ease of use and ensures trouble-free operation. (Check/evaluation/correction in real time) HIGHEST PERFORMANCE > The 2 operating modes (semi-automatic and automatic) make this possible efficient cutting in all conditions. Dcedpfxelf Tu Uj Adaep > The control allows up to 100 cutting programs with each different quantities and lengths and minimizes the Programming time for frequently executed jobs. > The automatically detected start position of the saw head reduces the setting time. > The feed of the saw head via driven hydraulic cylinders Linear guides with preloaded recirculating ball bearings ensures the Reduction of mechanical vibrations during cutting and higher Stability. > The automatic alignment of the front saw blade guide head depends on the dimensions of the bars to be cut reduces the processing time. > The saw blade is tensioned by the brushless motor and is constantly controlled and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system with 600 mm stroke is repeatable and cuts all lengths. > The vertical pair of rollers allows any type of bar or bundle that to be fed, to hold and to align. > The vector converter for stepless adjustment of the blade speed from 15 to 100 m/min allows cutting of any material. > The motorized chip conveyor can be positioned to the right or left of the cutting area to be assembled. CHARACTERISTICS: Fully automatic control - NC 5.0 -Innovative (Windows CE based) touch screen control with additional software Touch buttons for common operating functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via an in cylinder mounted servo valve, constant monitoring of the preselected torque 4 and with precise feed adjustment in millimeters/minute 5 -Setting / pre-selection of the stepless belt speed in m/min. -Saw band tension with band tension control and indication on the display by means electronic converter -Automatic detection of the beginning of the cut -Large 7" color touch screen to display and select all Machine functions and parameters and programming in a matter of seconds. Advertisement detailed alarm and error messages -Numerous special functions including different lengths + quantities (10 Run programs) as a sequence, clean cut, step execution and much more. -Stable, torsion-resistant and low-vibration cast steel saw frame -Carbide band guides for maximum cutting precision, hinged for easy saw blade change -Largely dimensioned deflection pulleys, adjustable, made of cast steel integrated belt circulation contro...

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). Dodpfxoxnlflo Adaecp - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Year of construction: 2019, condition: as good as new (ex-display), multifunctional end face mill Make Mitsubishi Dcedpfx Asfcrwcjdasp Type SPX4RO 5034 BT 50 NM diameter 50 mm 157 mm max. cutting depth 339 mm Total length 190 mm roll length = maximum immersion depth tipped with carbide plates VP 15 TF

Condition: new, The FSM 14 S Tool Grinder by KNUTH is a robust machine designed specifically for the precise and cost-effective grinding of HSS and carbide milling cutters, ranging from 4 to 14 mm in diameter. This handy milling cutter grinder series stands out for its user-friendly operation, making it an ideal choice for any tool crib, where efficient tool maintenance is essential. The FSM 14 S features the capability to grind 2, 3, and even 4-blade cutters, with an additional station available for outer spiral cutting edge grinding. Included in the package are collets tailored for common cutter diameters—4, 6, 8, 10, 12, and 14 mm—along with high-quality grinding wheels that enhance your workflow. This machine ensures rapid tooling and quick setup, enabling you to maintain your tools effectively. Invest in the FSM 14 S Tool Grinder today and elevate your tool sharpening capabilities. Request a quote for this reliable Tool Grinder and ensure your cutting tools are always ready for use. Dcodpfep Dtx Uex Adasp

Condition: refurbished (used), Year of construction: 2024, Saw blade solid carbide / HSS: max. 425 mm Drive power: - Two-stage with chain: 1.7/2.6 kW, - Two-stage with belt pulley: 3.7/4.5 kW Cutting speed saw blade (400 mm): - two-stage with chain: 10/20 m/min, 13/26 m/min, 15/30 m/min - two-stage with belt pulley: 20/40 m/min, 30/60 m/min Infinitely variable saw speed control fully electronic Working range square 90° max.:120 x 120 mm 45° max: Working range flat: 90° max.:230 x 80 mm Djdpfxjuiy Sbs Adaecp 45° max: Working range round: 90° max.: 140 mm 45° max: Feed length single stroke:5-2000 mm Multiple stroke:5-9999 mm Feed speed AC servo max.: 500 mm/s Weight approx.:3600 kg Dimensions LxWxH:3500mm x 1300mm x 2100mm Installation area LxW: 3500mm x 1300mm Technical description Kaltenbach KKS 401/ KKS 451 NA 2000 Retrofit Kaltenbach KKS 401/ KKS 451 Retrofit High-performance automatic saw for steel. Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The HMI interface for controlling the machine ensures simple and trouble-free operation of the system. Due to the design of the sawing system, it is possible to realize a very precise length tolerance. The machine is generally overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive - New electronic components - Maintenance or replacement of all hydraulic cylinders and valve terminals - Optimization and overhaul of the cooling system - Replacement of general wear parts - Overhaul of the machine body The machine also features - Fully automatic feed - Fully automatic miter adjustment +/- 60° Warranty: Unless otherwise agreed, we guarantee our machines for 6 months on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Scraper - Chain magazine for 6m materials - Removal gripper system for sorting the cut-off pieces - Removal gripper system for sorting the cut-off pieces and realizing a multiple recut at the end of the workpiece - Delivery and installation on your premises - Training of your employees

Condition: new, Robust double mitre metal bandsaw for professional use in metalworking and container fabrication, featuring hydraulic lowering of the saw bow. Technical Data: Cutting capacity: 0° round: 315 mm 0° square: 270 mm 0° rectangular: 250 x 400 mm 45° round: 280 mm 45° square: 280 mm 45° rectangular: 300 x 280 mm 60° round: 180 mm 60° square: 140 mm 60° rectangular: 140 x 180 mm -45° round: 250 mm -45° square: 220 mm -45° rectangular: 280 x 200 mm Cutting speed: 35 / 70 m/min Saw blade: 3460 x 34 x 1.1 mm Worktable height: 970 mm Motor power: 2.2 kW Coolant pump motor: 100 W Dimensions (approx.): 2270 x 970 x 1140 mm Weight (approx.): 580 kg Features: - Double mitre saw with tiltable saw bow, adjustable from left -45° to right -45° Dsdpfx Aew Hxapsdaocp - Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc., in industrial applications - Generously dimensioned cast saw arm for low-vibration operation - Equipped with two cutting speeds for optimal adjustment to the workpiece - Hydraulic lowering cylinder - Quick-release vice for fast and easy clamping of the workpiece - Precise, adjustable blade guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of delivery: - Bimetal saw blade 3460 x 34 x 1.1 mm - Blade tension adjustable via manometer - Carbide blade guides - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shutdown at end of cut - Base frame

Condition: refurbished (used), Year of construction: 2024, Eisele VA-L-350 Retrofit Fully automatic high-performance sawing machine with feed chain magazine for non-ferrous metals and plastics Manufacturer: Eisele Type: VA-L-350 Overhaul year: 2024 Saw blade, carbide: 350-400 mm Drive power, saw motor: 15 KW Saw motor speed: 1500 - 6000 min-1 Saw blade cutting speed: 1650 - 7500 m/min Saw blade feed steplessly adjustable: hydraulic Saw height control infinitely variable: fully electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 200 x 100 mm Working range round 90° max.: 130 mm Feed length single stroke: 5-900 mm Multiple stroke 5-9999 mm Feed speed servo-controlled feed unit: 350 mm/s Compressed air connection on site: 6-8 bar Weight (saw)approx.:1600 kg (magazine)approx.:2200 kg (optional) Dimensions LxWxH (saw)approx.: 1800mm x1300mm x1950mm (magazine)approx.: 7300mm 3900mm x1200mm (optional) Installation dimensions LxWxH approx.: 9200mm x4800mm x2800mm Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The PLC control system ensures simple and very profitable operation of the machine. Thanks to the powerful motor, short cycle times can be achieved even when sawing thick-walled profiles or solid materials. The soundproof cabin reduces the resulting noise emissions to a minimum. The machine is overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to Siemens S7 - Renewal of the ball screw drive - New hydraulic lines (hydraulic version) - New pneumatic lines (pneumatic version) - New pneumatic and/or hydraulic components - Overhaul of the control valves - Optimization of the suction performance - Overhaul of the Menzel minimum lubrication system Dcedpfouizlpox Adajp - Replacement of general wear parts - Overhaul of the cab - Replacement of all bearings and wear parts - Replacement of servo and frequency converter The machine is also equipped with - Reinforced motor 15 KW - Minimization of the material residue - Soundproof cabin - Splitting extension (for a high-quality cut surface without return marks) Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Mass clamping device for parallel sawing of several workpieces - Hydraulic clamping system - Flat magazine for automatic feeding of primary materials up to 6 m long - Roller conveyors on the infeed side - Roller conveyors on the outfeed side - Delivery and installation on your premises - Training of your employees

Condition: new, Robust double-mitre band saw for professional use in metalworking and tank construction, featuring hydraulic lowering of the saw bow. Cutting capacity: - Round 0°: 355 mm - Square 0°: 300 x 300 mm - Flat 0°: 490 x 300 mm - Round 45°: 350 mm - Square 45°: 290 x 290 mm - Flat 45°: 340 x 290 mm - Round 60°: 230 mm - Square 60°: 180 x 180 mm - Flat 60°: 220 x 180 mm Blade speed: 35 / 70 m/min Saw blade: 3770 x 34 x 1.1 mm Working height approx.: 870 mm Coolant pump: 100 W Motor power: 1.9 kW Connection: 400 V Dimensions (LxWxH) approx.: 2200 x 1400 x 1500 mm Weight approx.: 625 kg Dsdsw Hxckjpfx Adascp Features: - Double-mitre saw with pivoting saw bow from left -45° to right +60° - Ideal for machining pipes, structural and solid materials such as stainless steel, steel, etc., in industrial environments - Generously dimensioned cast saw arm for low-vibration operation - Two band speeds to optimally adapt to the workpiece - Hydraulic lowering cylinder - Automatic vice release after cutting - Quick-release vice for fast and easy clamping - Precise, adjustable blade guides for optimal cutting results - CE/IEC certified, German documentation and support Scope of delivery: - Bi-metal saw blade 3770 x 34 x 1.1 mm - Blade tension adjustable via pressure gauge - Carbide blade guides - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic cut-off after end of cut - Base frame

Condition: refurbished (used), Year of construction: 2024, Overhaul year: 2024 Saw blade max. carbide 500/550 mm Drive power saw motor: 6 KW Saw motor speed in 6 stages: 2400- 3200 min-1 Saw blade cutting speed (500-550 mm): 3800 - 5500 m/min Saw blade feed steplessly adjustable 0-40 mm/s Saw height control infinitely adjustable fully electronic Working area square 90° max.: 160 x 160 mm Working area flat 90° max.: 380 x 60 mm Working area round: 90° max.:165 mm Feed length: 10-9999 mm Feed speed AC servo max. 400 mm/s Compressed air connection on site 6 bar Weight(saw)approx.:2850 kg Dimensions LxWxH(saw)approx.:2900mm x 1725mm x 2200mm Footprint LxW 2900mm x 1725mm The machine is in mint condition, both technically and visually, after a completed retrofit. Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The positioning system ensures simple and very profitable operation of the machine. Thanks to the powerful motor, short cycle times can be achieved even when sawing thick-walled profiles or solid materials. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive (optional) - New electrical components - New pneumatic lines - Maintenance or replacement of all hydraulic cylinders and valve terminals - Overhaul of the extraction system - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the soundproof cabin The machine also has - Soundproof cabin Dcodpsuiy Rqjfx Adasp - Zero point adjustment (manual) Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Chain magazine for 4/6m materials - Splitting extension (for a high-quality cut surface without return marks) - Horizontal clamping saw line - Cut stop in material feed unit - Reinforced motor 11 KW - Roller conveyors - Delivery and installation on your premises - Training of your employees

Condition: new, Machine in stock and immediately available Double Mitre Metal Band Saw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor output S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre saw with swivelling saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in commercial applications - Generously sized, cast saw arm for low-vibration operation - Two band speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder - Quick-release vice for fast, easy clamping of workpieces - Precise, adjustable saw blade guide for optimal cutting results - CE/IEC certified, German documentation and German service Scope of delivery: - Saw blade - Material stop - Pressure gauge (band tension) - Carbide saw blade guides Dcsdpfx Adsd R Sipjasp - Quick-release vice - Integrated coolant system - Hydraulic bow lowering - Motor protection switch - Automatic end stop - Base frame

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Djdpfx Ajuiy Nyodascp Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Condition: new, Cutting range: round 0°: 270 mm square 0°: 260 x 260 mm flat 0°: 320 x 260 mm round 45° R: 230 mm square 45° R: 220 x 220 mm flat 45° R: 230 x 150 mm round 60° R: 140 mm square 60° R: 140 x 140 mm round 45° L: 200 mm square 45° L: 175 x 175 mm flat 45° L: 220 x 150 mm Cutting speed: 40 / 80 m/min Saw blade: 2925 x 27 x 0.9 mm Working height: 975 mm Coolant pump: 100 W Saw motor: 1.9 kW Voltage: 400 V Dimensions LxWxH, approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Dedpfx Aeiqt Rledaecp Features: - Double mitre saw with swivel saw arm from left -45° to right +60° - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. in commercial applications - Generously dimensioned cast saw arm for low-vibration work - With 2 saw blade speeds for optimum adaptation to the workpiece - Hydraulic lowering cylinder - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - CE/IEC, German documentation and German service Scope of delivery: - BiMetal band saw blade 2925 x 27 x 0.9 mm - Band tension adjustable via pressure gauge - Carbide guides - Quick-clamping vice - Material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic switch-off at the end of the cut - Underframe