Used Tungsten Carbide for sale (492)

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 205-043-095, TTB TGC 64 F – 2007 | High-Precision CNC Tool Grinding Machine Fully overhauled by the manufacturer TTB Engineering SA and from a single owner. For sale: TTB TGC 64 F, year 2007, a high-precision CNC tool grinding center designed for the production and regrinding of cutting tools in carbide, HSS and other materials. The TGC series (Tool Grinding Center) is a well-established platform developed for the manufacturing of high-precision tools with micrometric accuracy. Equipped with a reliable Fanuc control system, this machine offers excellent performance, repeatability, and long-term stability. Hsdpoy D Sb Isfx Acrol With its 5/6-axis configuration, the TGC enables the production of complex tool geometries and ensures maximum flexibility for a wide range of applications, including drills, end mills, and special tools. TTB machines are known for their exceptional thermal and mechanical stability, allowing continuous production over long periods with minimal operator intervention and consistent micron-level precision. Key features: CNC tool grinding center (5 or 6 axes) Fanuc control system Suitable for carbide, HSS, and special materials High precision and repeatability (micron range) Ideal for production and re-sharpening of cutting tools Robust Swiss-built machine with high reliability The TGC model is the predecessor of the Evolution series and remains a proven and reliable solution in tool manufacturing environments.

Condition: excellent (used), total power requirement 31,7 kW main drive 7,5 kW Input width 550 mm ca. 25/75 mm Hedpfjyvvtrex Acrel ventilator 22kW / 10.800 m³/h Industrial shredder or shredder line with carbide knives for shredding various materials such as wood, cardboard, glass fiber mats or similar, e.g. as pre-treatment for recycling processes. The system consists of two infeed conveyor belts, the chipper and a transport fan.

Condition: used, Year of construction: 2006, I'm selling a used industrial pressure washer from the Finnish company Aqua Clean in very good condition. The machine has a working space of 140 cm in diameter and a height of 90 cm. It's made of stainless steel. It's also equipped with an oil separator and filter. The washer is insulated. The upper and side lances are driven by a motor with a reducer. The lower lance is driven by a pump pressure of 4 atmospheres. It also has a fume extractor. It has a heating temperature of up to 90 degrees Celsius and an operating timer. The last photo shows the new machine, still in production today in its original form. The manual is in English. The main pump has a silicon carbide seal replaced to withstand the high temperatures and aggressive chemicals. Hedoy Hxz Hjpfx Acrsl

Condition: new, Year of construction: 2026, functionality: fully functional, The GWDress-250 smartline is the intelligent solution for the precise dressing of grinding wheels up to Ø 250 mm. Thanks to selectable manual or automatic control, dressing processes can be designed with maximum flexibility and efficiency. Performance Data: Rotary axis & feed axis CNC controlled Diamond Grinding Spindle: HSK-50 or customer-specific (e.g., SK-40, Perfect Arbor, etc.) Max. Dressing Wheel Diameter: ø300 mm Max. Dressing Wheel Width: 20 mm Max. Grinding Wheel Diameter: up to ø250 mm Grinding Wheel Speed: 0–1,500 rpm (infinitely variable) Travel Range (Left/Right): 135 mm Travel Range (Forward/Back): 135 mm Dressing Wheel Diameter (Silicon Carbide): ø180 x 10 x ø32 mm Swivel Range: approx. 98 degrees on both sides Dressing Wheel Speed: 0–2,800 rpm (infinitely variable) Dressing Wheel Oscillation Frequency: 0–50 strokes/min (infinitely variable) Dressing Wheel Oscillation Length: 0–50 mm (adjustable) X, Y Axis Optical Scale Resolution: 0.001 mm Capabilities: Dressing of radii and wheel stacks (multi-wheel packs) Hjdpfsw E E S Asx Acrsl Power Supply: 380V, 50Hz; Total Power: approx. 1.5 kW DXF Import: Included Camera System: Included (with live transmission via 23" monitor) Software: Latest generation GWDress-Studio with automatic AI measurement included Country of Origin: Austria

Condition: new, Year of construction: 2026, functionality: fully functional, Performance Data: Diamond Grinding Spindle: HSK-50 or customer-specific (e.g., SK-40, Perfect Arbor, etc.) Max. Dressing Wheel Diameter: ø300 mm Max. Dressing Wheel Width: 20 mm Max. Grinding Wheel Diameter: up to ø250 mm Grinding Wheel Speed: 0–1,500 rpm (infinitely variable) Travel Range (Left/Right): 135 mm Travel Range (Forward/Back): 135 mm Dressing Wheel Diameter (Silicon Carbide): ø180 x 10 x ø32 mm Swivel Range: approx. 98 degrees on both sides Dressing Wheel Speed: 0–2,800 rpm (infinitely variable) Dressing Wheel Oscillation Frequency: 0–50 strokes/min (infinitely variable) Dressing Wheel Oscillation Length: 0–50 mm (adjustable) X, Y Axis Optical Scale Resolution: 0.001 mm Capabilities: Dressing of radii and wheel stacks (multi-wheel packs) Power Supply: 380V, 50Hz; Total Power: approx. 1.5 kW DXF Import: Included Camera System: Included (with live transmission via 23" monitor) Software: Latest generation GWDress-Studio with automatic AI measurement included Hedpfjha Eh Hjx Acrsl

Condition: good (used), Year of construction: 2003, Horizontal bandsaw fully automatic with gripper feed Cutting capacity 90° round: 400 mm square: 400 x 400 mm Cutting speed: 15 - 90 m/min Working height: 800 mm Saw blade dimensions: 4570 x 41 x 1.3 mm Material feed per stroke: 560 mm Multiple feed: up to 9 times = 5040 mm Motor power: 5.5 kW Dimensions (L x W x H): 2250 x 2850 x 1700 mm Weight: 2500 kg Accessories / Special features: • Fully hydraulic: workpiece clamping, saw feed, bow lifting, and material feed • Gripper feed system • Screw conveyor swarf remover • Fully automatic operation or single cuts • Automatic bow lifting height adjustment according to material diameter • Max. cut length: 560 mm with single feed • 5040 mm with multiple feed • Hydraulic clamping pressure regulation for the vise • Saw band guidance via deflection rollers and carbide jaws • Constant saw band tension with automatic shutdown in case of blade breakage • Coolant system • Piece counter • Emergency stop switch • CE compliant Hjdpfxoynaz Nj Acrjl Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2005, Edgebander manufactured in 2005. This OTT Twister features a hot-cold melt adhesive application process and can handle edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses of 8 to 60 mm and has a feed speed of 14-20 m/min. If you are looking to get high-quality edge banding capabilities, consider the OTT Twister edgebander we have for sale. Contact us for further details. • Adhesive application: Hot/cold melt adhesive process; application roller with synchronous and counter-rotation • Edge thickness: 0.3–10 mm • Workpiece thickness: 8–60 mm • Workpiece width: minimum 70 mm • Workpiece length: minimum 150 mm • Operating pressure: 6 bar • Feed power: 3.0 kW • Feed speed: 14–20 m/min • Electrical connection: 3x 400 V, 50 Hz • Extraction requirement: 1x Ø180 mm at 20 m/s = 35 m³/min • Air speed (minimum): 20 m/s • Compressed air consumption: approx. 300 l/minProcessing units / equipment on the machine: • Joining: • 2 x 2.2 kW, n=14,600, 250 Hz; two application-controlled working spindles • Combi-melt gluing unit: • Top-mounted, changeable hopper for EVA, PUR hot melt adhesive or cleaning granulates; hopper volume 2.5 l • AKM (automatic edge magazine): • Automatic edge magazine with optical monitoring for strip edges in fixed lengths • Capping: • 2 x 0.8 kW, n=12,000, 200 Hz; automatic swivel 0°/5°; 2 HM saw blades Ø140 x 3.2 x 16, z=34 • Flush milling: • 2 x 0.7 kW, n=12,000, 200 Hz; single-sided probing; 2 carbide-tipped indexable knife heads HF70, Ø70 x 20 x 16, z=4 • Fine milling (bevel 15°/30°/45°): • 2 x 0.3 kW, n=12,000, 200 Hz; double-sided probing; 2 carbide indexable insert cutter heads HF70, Ø70 x 20 x 16, z=4 • AWSR (radius R2–R5): Hodpfx Ajyn I U Recrol • 2 quick-change sets for fine milling cutter, 2 x 0.3 kW; 2 carbide indexable insert cutter heads AR73 x 16 x 16, z=3, R2–R5 • AKF (copy milling): • Automated copy milling with two separate working spindles for end faces and longitudinal radii; 2 x 0.37 kW, 12,000 rpm; tools R1–R3 • Scraper blade: • 2 x carbide scrapers, automatic feed • Surface scraper: • 2 x carbide scrapers, with fine adjustment device • PU set: • 5-way spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent), fine buffing device with cloth disc • Edge cleaning: • 2 x 0.2 kW, n=2,800, 50 Hz, oscillating brushes

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,357 h, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 370 mm, This Sodick AG60L Die-sink EDM machine was manufactured in 2012. It features a ceramic table measuring 750 x 550 mm and can handle a maximum workpiece weight of 1500 kg. The machine includes a linear motor, glass scales, and a remote control for enhanced precision and ease of use. Consider the opportunity to buy this Sodick AG60L die-sink EDM machine. Contact us for more information about this machine. Additional equipment • Replaceable paper filter / SEC-10 (C-axis) / SGF2 Nano Wear Unit / Fire Extinguisher / TMM3 Power Generator / Dielectric Cooling Unit / 15" TFT Touch Screen / Lowerable Work Container • Linear motor (X-, Y-, Z-axes) / Glass scales in X-, Y-, Z-axes / Ceramic work area / Remote control • Accessories include electrodes (graphite, tungsten, and copper), electrode holders, and jigs with documentation. / Some electrode holders with electrodes are still in the machine. Machine Benefits Hjdpfox D Rytjx Acrel Technical Machine Benefits • Dimensions of machine (lxwxh): 1852 x 2825 x 2570 mm / machine weight: 5350 kg • Max. Workpiece weight: 1500 kg / ceramic table dimensions (w x d): 750 x 550 mm • Floor-table distance: 850 mm / max. Electrode weight: 50 kg • Dielectric fluid level (min-max): 150 - 400 mm / dielectric capacity: 465 l

Condition: ready for operation (used), Year of construction: 2025, This Optimizing Cross-Cut Saw was manufactured in 2025. It features a robust frame with a special inclined support surface for easier loading and squaring, and a high-precision pushing system. The cutting unit is equipped with a carbide-tipped circular saw and adjustable cutting speed. It includes a computer with CNC software for enhanced productivity and safety. Consider the opportunity to buy this Salvador Superpush 200. Contact us for more information about this machine. Additional equipment • Outfeed Table: Made of solid steel with a 30° incline. Length 3000 mm. • Safety Features: Rear protective cover, dual dust protection, and automatic lubrication. Machine Benefits Qualitative Machine Benefits • Cutting cross-section: max 240x150 / 300x110 mm, min 30x15 mm • Pusher slide dimensions: 300 x 345 x 25 mm • Feed speed: adjustable max feed speed set to 60 m/min • Pusher drive system: brushless dc servo drive motor with electronically controlled feed. • Productivity enhancements: increases productivity and improves wood yield. • Reliability features: robust construction with thick, reinforced steel frame. • Processing accuracy: two electropneumatic aligners ensure square cuts. Technical Machine Benefits • Special inclined surface with a 30° angle, intelligent clamping, and automatic lift pusher during scanning. • Windows-based software with a 22" led color display and remote maintenance capability. • Electronic system: real-time communication with a modern computer-aided cnc. • Software: linux-based optimization algorithm with a windows 10 interface. • Pc features: intuitive s4u software, extensive customization, real-time updates, error detection, and remote maintenance software. • Saw motor power: 5. 5 kw • Saw blade type: carbide-tipped circular saw • Blade diameter: 500 mm • Number of teeth: z=108 • Board length before cutting: max 4100 mm, min 500 mm Extra Information Hodpfx Acoyaikdjrol Machine still under power. Please contact us for consultation and a custom-tailored offer.

Condition: new, Massive work table made of heavily ribbed cast iron Robust base frame constructed from welded steel Precision sliding table made of anodized aluminum Carbide guideways – for long-term precision and minimal maintenance of the sliding carriage Tilting cast iron saw unit with double segment guide Heavy-duty parallel fence with round bar guidance Integrated mitre cutting device on the sliding table Scoring unit with its own powerful drive motor (optional) Equipped with a high-quality panel frame & telescopic stop, integrated roller, inclined scale, and practical eccentric clamp Saw blade speed adjustable in two steps (from above, table insert removable) Includes pendulum blade guard Hodpfx Acoit I Sborjl INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm): 140 with 400 mm blade Max. cutting height at 45° (mm): 100 with 400 mm blade Saw blade tilting range (degrees): 90/46° Manual saw blade lifting and tilting Saw blade speed (rpm): 3,500 / 5,000 Main motor power (kW) 50 Hz: 7.5 Scoring unit motor power (kW) 50 Hz: 1.3 Scoring unit speed (rpm): 9,200 Panel cutting capacity (mm): 3,200 x 3,200 Cutting width for parallel cuts (mm): 1,270 Extraction port diameter (mm): 120, 60

Condition: ready for operation (used), Year of construction: 2018, cutting diameter 300 mm saw band length 3660 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: round 290 mm capacity 45 degrees: flat 260 x 280 mm capacity 60 degrees: round 200 mm capacity 60 degrees: flat 180 x 170 mm coolant capacity ca. 100 l Hodpfjx A H T Hsx Acrjl Control SPS total power requirement 2.4 kW AC weight 904 kg range L-W-H 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request - in checked conditions - machinevideo - ?v=LAhu_AI9J5A Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) * Fully automatic with automatic material feed * Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit * 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table * Mitre cuts up to 45° possible in automatic mode * Mitre cuts up to 60° possible in semi-automatic mode * Manual mitre adjustment * Stepless adjustment of the mitre angle - Saw blade guides made of carbide plates - Saw feed continuously adjustable via fine throttle - Strong machine bed and torsion-free saw frame - Stepless speed adjustment of the saw blade - Coolant device - Operating instructions for machine + control system * Special accessories included: - 1x PEGAS chip conveyor

Condition: new, Year of construction: 2025, I sell here several machines, devices, etc. for woodworking, forklifts, work platforms, as well as accessories and spare parts. Therefore, they necessarily also note my other auctions! Format circular saw table circular saw carpenter circular saw format saw WH- machines Type: Z45 - 400E Professional New wide aluminum format carriage 320 cm with carbide round bar guide system Hedpfx Aoh Hauyjcrel width approx. 415 mm cantilever table with extendable aluminum cutting fence, incl. 2x folding fence cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the saw unit. Electric tilting of the saw blade up to 45 with digital display of the tilting angle. Precise tilting segment guide of the saw unit. rip fence up to 125cm with fine adjustment stable 50 mm round bar guide parallelogram protection device with upper suction can be folded away for standing workpiece cuts. 2 different speeds adjustable ( 4000/ 600rpm) saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scorer with 120 mm scoring saw blade and electrical height adjustment Engine power main engine 5,5 KW with overload protection and thermal monitoring. Motor power scorer 1,1KW Body made of sturdy 6mm box construction with reinforcement Stable cast iron worktop incl. trimming wedge and eccentric workpiece holder The machine can also be purchased via installment plan with a term of 36 months. This offer is an installment plan leasing offer via the company DLL Leasing with a term of 36 months. Credit check and processing is done by DLL Leasing. Further terms and conditions on request. For further data, delivery times and availability please ask. Depending on availability, the machine can be inspected and tested at our warehouse. prior inspection is expressly desired, just leave tel. no. by mail, then I will get back to you about a viewing appointment. Subject to prior sale, All information without guarantee. The machines can be picked up yourself or shipping by forwarding at the expense of the buyer. Loading and packing can be organized by us. The shipping costs are a guideline, depending on distance and unloading possibility, they may vary, please inquire. An invoice with sales tax will be issued.

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 303 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, Striebig Standard 6224 TRK I (Wood Support Wall) Cutting capacity Type 6224 L: 5300 x H: 2240 / H: 2100 x D: 80 mm Saw Frame • Precision machined to 1/100 mm accuracy • Solid, self-supporting, firmly welded, torsion-resistant saw frame • TRK2 automatically adjustable aluminum slatted frame with plastic supports • TRK1 automatically adjustable wood support wall • 17-position roller support with 3 brake pedals (Type 6224) • 5.15 m long, divided center support at optimal working height (Type 6224), with aluminum grids • Aluminum small parts support (1 pair) for individual use Saw Beam Hsdpsu Nf E Aefx Acrol • Stable, durable steel saw beam construction Saw Unit • Effortless operation thanks to fully balanced Saw unit • Robust motor carriage bearings ensure high cutting precision • Powerful, high-torque 5.5 kW (7.5 HP) motor • 300/30 mm carbide circular saw blade • 9 mm saw blade projection (undercut) • Integrated stop for horizontal strip cuts • SUPERSILENT sound insulation to reduce saw blade noise • Mechanical motor brake Design, Ergonomics • STRIEBIG-typical product design • Functional and user-friendly ergonomics Installation • Wall or freestanding installation possible - Pneumatically braked support rollers A05 TRK - Paper holder - Complete aluminum small parts support (2-part) - Vertical digital measuring system

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Hedsr Nfvmjpfx Acrol Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, CONSTMACH planetary concrete mixers enable the production of homogeneous concrete in a short time thanks to their high-performance mixing technology. In planetary mixers, the mixing arms rotate both around their own axis and around the center, ensuring that every part of the mixture is processed evenly. Thanks to this unique design, it is possible to produce concrete with a perfect consistency in as little as 30 seconds after adding water. Planetary mixers stand out from classic twin-shaft mixers with their energy efficiency, cement savings, and superior durability. Planetary Concrete Mixer Technical Specifications MODEL: CPLN - 0.5 Loading Volume: 750 liters Fresh Concrete Volume: 625 liters Compacted Concrete Volume: 500 liters Motor Power: 18.5 kW Lower Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 0.75 Loading Capacity: 1000 liters Fresh Concrete Volume: 875 liters Compacted Concrete Volume: 750 liters Engine Power: 30 kW Bottom Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 1 Loading Capacity: 1,500 liters Fresh Concrete Capacity: 1,250 liters Compacted Concrete Capacity: 1,000 liters Engine Power: 45 kW Lower Wear Plates: 15 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 1.5 Loading Volume: 2,250 liters Fresh Concrete Volume: 2,000 liters Compacted Concrete Volume: 1,500 liters Motor Power: 2 x 30 kW Lower Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 10 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 2 Loading Volume: 3,000 liters Fresh Concrete Volume: 2,500 liters Compacted Concrete Volume: 2,000 liters Engine Power: 2 x 37 kW Bottom Wear Plates: 15 mm Hardox 450 Side Body Wear Plates: 12 mm ST 52 Mixing Arm Wear Plates: 30 mm Ni-Hard Why Choose CONSTMACH Planetary Concrete Mixers? Hodjxp U S Dopfx Acrsl CONSTMACH manufactures mixers that deliver maximum performance even under the most demanding production conditions, backed by years of engineering experience. Each model is equipped with high-quality materials and CE-certified motors. Our planetary mixers secure your investment with low maintenance costs, high mixing efficiency, and a long-lasting design. Additionally, optional chrome carbide coatings, additional discharge covers, and different mixing arm options ensure full compliance with your production needs. For professionals seeking durability, efficiency, and technical excellence, CONSTMACH Planetary Concrete Mixers are the smartest investment choice in their class. What Does Constmach Do? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: ready for operation (used), Year of construction: 1989, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 20216035, color channels: 2 kleuren met keertrommel ook 1/1, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 102 mm, paper height (max.): 360 mm, total length: 2,800 mm, total width: 1,250 mm, total height: 1,690 mm, space requirement length: 2,800 mm, space requirement width: 1,250 mm, space requirement height: 1,690 mm, counter reading (black): 11,500,000, type of input current: three-phase, input current: 16 A, input voltage: 200 V, Equipment: documentation/manual, In exceptionally good and original condition, only 11.5 million prints (!) High-quality "heavy duty" B3 (35x50cm) 2-colour offset machine for high-quality streak-free printing due to typical constructive qualities; The turning device is in excellent condition. Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. Hodpfev Nwgnsx Acrel We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour with clean and weather printing 9,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 4.75 kW Built-in circulation pump and water tank for damp work Dimensions L x W x H = 2800 x 1250 x 1690 mm Net weight 3,560 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220/230 VAC or via the supplied transformer 3 x 380/400/415 VAC

Condition: ready for operation (used), Year of construction: 1990, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 0651044, color channels: 1 kleur, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 105 mm, paper height (max.): 360 mm, space requirement length: 1,800 mm, space requirement width: 1,290 mm, space requirement height: 1,650 mm, counter reading (black): 13,084,844, type of input current: three-phase, input current: 16 A, input voltage: 220 V, Equipment: documentation/manual, In exceptionally good and original condition, only 13 million prints (!) High-quality "heavy duty" B3 (35x50cm) 1-colour offset machine for high-quality streak-free printing due to typical constructive qualities; Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Hedpev Nv Svjfx Acrjl Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 3.2kW Built-in circulation pump and water tank for the damp work Dimensions L x W x H = 1800 x 1290 x 1650 mm Net weight 1,960 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220 VAC, no transformer included

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, laser power: 30 W, type of cooling: air, scan area length: 150 mm, scan area width: 150 mm, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - system for automatically determining the focus distance - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm Hedpfxjwkpx Re Acrsl - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: new, Year of construction: 2026, functionality: fully functional, laser power: 30 W, type of cooling: air, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, laser wavelength: 1,064 nm, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the system is very practical and can be used anywhere. The universal laser marking system LAS 22 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20 or 30 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. Hjdpfxsuy H Nqo Acrol The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: new, Year of construction: 2026, functionality: fully functional, Suitable for cleaning coolant oil used in carbide grinding. Hodoy Anqijpfx Acrol Our solution with an ultra-fine filtration system for grinding oil optimizes your tool production at the highest level. In today’s demanding manufacturing environment, the quality of your products is critical. Our MANTA ultra-fine filtration systems clean your grinding oil at a microscopic level to maximize the performance and service life of your precision tools. Available in a wide range of configurations.

Condition: new, Year of construction: 2026, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Hedpfx Acegculvjrsl Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: not inspected (used), Year of construction: 1998, machine/vehicle number: 13189, functionality: limited functionality, VERTICAL PANEL SAW WITH ELECTRIC MOVEMENTS & DIGITAL DISPLAYS FOR CUTS Brand: GMC MACCHINE SRL Model Type: KGS 660S Serial No.: 13189 Year: 1998 (Photos taken prior to any potential refurbishment, machine offered as-is) Hedpfeu R Ulhsx Acrjl MACHINING CAPACITIES: - Max. horizontal cutting length: 5300 mm - Max. horizontal cutting height: 2100 mm - Max. vertical cutting height: 2200 mm - Max. cutting depth: 80 mm OTHER FEATURES: - Power supply: 380V Three-phase+T - Installed power: 7.5 kW - Main motor power: 4.4 kW (6 hp) - Saw blade speed: 5,200 rpm Pneumatic blade feed - Carbide-tipped saw blade: Ø 300 mm, bore Ø 30 mm - Welded steel frame, PVC slat frame with automatic retraction via pneumatic cylinders - Fully lengthwise pneumatic retractable intermediate support with 2 adjustable and retractable stops - Retractable rollers for panel handling - Pneumatic locking of the saw carriage - 8 bar pneumatic feed - Digital display for cuts - Complete extraction system DPS Back cover spans the entire rear of the machine Lower longitudinal channel for sawdust collection Multiple extraction points in the lower section Extraction port: Ø100 mm - Support for floor-mounted installation - CE Marked Total space required when mounted on supports: 6300 x 1600 x 3040 mm (includes operator and maintenance area) Transport dimensions, 2 packages: . 1 frame 6300 x 860 x h.2620 mm . 1 pallet 3150 x 1000 x 1000 mm Total weight: 1250 kg Please contact us for supply of consumables, accessories, and/or extraction systems. Offered as a lot, without refurbishment or warranty. Ex works price, excluding VAT. Transport and services on request.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 1,900 mm, total length: 2,300 mm, table width: 400 mm, quill stroke: 520 mm, quill travel distance: 300 mm, type of input current: three-phase, distance table to quill: 120 mm, table length: 800 mm, warranty duration: 12 months, feed length X-axis: 455 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, year of last overhaul: 2026, table load: 800 kg, input frequency: 50 Hz, working range: 900 mm, input current: 10 A, Equipment: documentation/manual, EDM312MF20/30 Machine: Complete Overhaul 12-Month Warranty Year of Manufacture: 2007/2026 Travel Range X/Y/Z: 450x300x300mm Distance Table/Z-Support: 120/520mm Work Table: 820x400mm Work Tank: 900x520mm Filling Height of Work Tank: 300mm Max. Dielectric Volume: 750l Max. Electrode Weight: 30/150kg Workpiece Weight: 800kg Machine Weight: 2800kg Machine Dimensions (W x D x H): 1960x1800x2610mm Equipment: MF20 Operator Interface Optional with MF30 Operator Interface CO² Fire Extinguishing System Cartridge Filter Heat Exchanger Direct Measuring System in X/Y/Z/C Axis C-axis: 100 rpm, Resolution 0.0001° C-axis Holding Brake Hedpfxsyxlxie Acrol Generator: 65 Amp EDM Current C-Box for High Removal Rates in Carbide Machining Electrode Changer, 20 Positions Quick-Change Electrode Holder EROWA, Hirschmann, 3R Options: New Control System with MF30 Operator Interface New EDM Generator Fume Extraction with Activated Carbon Filter Training On-site Commissioning Transport

Condition: used, Year of construction: 1977, Machine type: center‑hole grinding machine Model: AG 5100 Year of manufacture: approx. 1975–2000 (various serials) Hodpfx Aswwrdiscrel Center distance (grinding stroke): 50 mm to 2,000 mm Workpiece spindle capacity: 8 mm to 125 mm diameter Workpiece swing over tailstock guide: approx. 290 mm Swing over grinding‑head column: approx. 300 mm Maximum workpiece weight: approx. 250 kg Center‑hole taper range: 2 mm to 50 mm diameter Center‑hole taper angle: approx. 60° Chuck capacity: approx. 4 mm to 150 mm Grinding‑head vertical stroke (coarse adjustment): approx. 130 mm Fine feed range of grinding pin: 0.01 mm to 1 mm per revolution Grinding‑pin diameter: 20 mm to 60 mm Grinding‑spindle speeds: 13,000 rpm to 45,000 rpm Spindle drive: approx. 0.5 kW Machine power supply: 400 V, 50 Hz Machine weight: approx. 1,000 kg Dimensions (L × W × H): approx. 1,900 mm × 600 mm × 1,800 mm Lubrication/cooling: pneumatic oil‑mist lubrication of grinding spindle Orifice for long workpieces in machine base, tailstock height adjustable with carbide inlays and live center Manual dressing device mounted laterally on grind spindle, approx. 40 mm stroke with pendulum swing for accurate taper Fold‑down pre-centering device for workpiece No workpiece drive via tailstock (passive center)

Condition: new, Year of construction: 2026, KDP350 Cabinet Sandblaster is an efficient surface treatment and cleaning machine for metal components, designed for professional workshops, industrial facilities, and refurbishment services. The 330-liter working chamber and two side doors with full-seal gaskets ensure convenient access and dust-free operation. The set includes a DC15 cyclone dust extractor, which effectively removes dust generated during operation. This unit is ideal for sandblasting wheels and other metal parts requiring precise cleaning. Key Features of the KDP350 Sandblaster Large working chamber – 330 liters capacity allows processing of larger components. Two side doors – on the right and left sides for easy loading and part handling. Dust-free operation – thanks to sealing gaskets and extraction ports (63 mm and 90 mm). Gun with ceramic nozzles – includes 4 interchangeable tips (4, 5, 6, 7 mm) for precise blasting. Illuminated work area – improves visibility and accuracy during operation. Integrated gloves – abrasion-resistant and protect the operator’s hands. Compatible with various abrasives – such as quartz sand, glass beads, silicon carbide, emery, and plastic granules. Standard Equipment DC15 cyclone dust extractor with filter and hose 12V fluorescent lamp (powered by 230V, with switch) 2 integrated rubber gloves Blasting gun with 4 ceramic nozzles (sizes: 4, 5, 6, 7 mm) 4 protective films for the viewing window Hedpsw H N R Sefx Acrjl 2 dust extraction ports: 63 mm and 90 mm diameter 2 side doors with full-circuit sealing User manual in Polish Technical Specifications of the KDP350 Sandblaster Specification Value Working capacity 330 L (0.33 m³) Operating pressure 4 - 8 bar Air consumption 400 - 700 l/min Air inlet 1/4" quick coupling Viewing window area 580 x 270 mm Doors 2 pcs (left and right sides) Dust extraction ports Ø63 mm and Ø90 mm Internal dimensions 890 x 655 x 360/610 mm External dimensions 960 x 720 x 1500 mm Weight 88 kg Note: The machine is delivered in parts and requires self-assembly according to the included manual.